Machine virtual MS Java and Java.

Similar Questions

• Change of Machine virtual Swapfile location and impact on vMotion?

  Hello

  I have a DRS and HA permit 2 Server ESXi 4.1 cluster. We are having a problem with the issue of disk space on the LUN for which we intend to change the location of the pagefile to a different SAN LUNS on each host ESXi virtual machine. I'll create 2 SAN LUNs, one for each host store the VM swap file. I want to know is what I SAN LUNS as a single server or servers in the area? If I do not these 2 LUNS for both servers then it will affect the vMotion? VMotion will be able to migrate a VM from one host if SAN LUN on which swapfile resides is not accessible from another host?

  Thanks in advance!

  Please note what file is located on datastore (unshared) local when you vMotion, virtual machine from one esx host to another host esx, vMotion time increases because during vMotion swapfile even is migrated as it has the memory of the virtual machine state. So this explains why there is an impact.

  Arrived at the point of storing VM Swap file on the shared storage. In fact, it's best practices for two reasons.

  1. you don't finish save swap files

  2. your storage space is used efficiently

  3. If you are replicating LUNS on remote site, you can exclude this LUN

  If you want more details please see this white paper from NetApp.

  NetApp and VMware vSphere best practices storage (TR-3749)

  It may be useful

  Thank you

  Preetam Zare

• Machine virtual Windows 7 - freezes\reverts of the screen when going from Windowed to full screen and vice versa.

  I use a Win7 box with a Machine virtual Win7 on it.  When I started using the VM, it should start and login and work very well.  Shortly after I started having the following problem.  It loads in windowed mode, so I me the welcome greenish\blueish after cutting inside.  If I wait for the Office to load, when I do the full VM screen, it goes full screen then the screen goes to the Welcome screen again, but it's just a static image.  It won't change until I have send a Ctrl-Alt-Del command.  Can I get the normal window with options for logging, start the Task Manager, etc..  If I press ESC or click Cancel, it will show the office and I can work on it without problem.

  If I leave full screen mode windowed after that, the same thing happens, except instead of the Welcome screen, I get the screen of Ctl-Alt-Del as a static picture.  Once again, if I send the Ctrl-Alt-Del command, then cancel, I get the office as usual and it will work until I have try to resize the screen again.

  Can someone help me understand what is happening?

  Thanks in advance,

  Joe

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  Hope this information helps.

• TWO OS on a single machine virtual is possible or po?  (OS on a virtual machine of towing isn't possible tro?)  and thank you

  TWO OS on a single machine virtual is possible or po?  (OS on a virtual machine of towing isn't possible tro?)  and thank you

  Voila now I need to create a machine with a characteristic (two processor two NIC etc...) and the more important the two system c which will be disappointed the win XP and Win server 2003 I have a big prob to find how to do this (this is my problem)

• Open with: 'Application name' - 'Name of the Virtual Machine' (2.0.4) AND (2.0.5)

  Hello

  Looking for help here...

  I notice that if I try to open a file on my Mac with an application of my virtual machine (Win XP Professional) I get 2 options for each windows application:

  1. Windows Media Player - Windows XP Professional (2.0.4)

  2. Windows Media Player - Windows XP Professional (2.0.5)

  The 2.0.4 option never works but the 2.0.5 option. I know this has something to do with the upgrade to the latest 2.0.5 version, but how do you / is it possible to remove the non-fonctionnel 2.0.4 options?

  Help, please! It's pretty boring.

  I have only haveone of virtual machine set up.

  Rich

  Make sure that the virtual machine is turned off and not suspended.  First locate the virtual machine in the finder.  You can do it by Ctrlclicking on it from the library of the virtual machine and choose Show in Finder.  In Finder Ctrlthe .vmwarevm of the virtual machine and choose "show package content".  If some shows as a folder go there.  Of in the virtual machine folder, you will see a folder named Applications.  Applications are the links to the Applications that you open in the virtual machine.  Remove vouchers there should do.  You may be able to determine the good by the update and the last number should be also the most recent.  These changes to take effect, you will need to reboot or restart the finder.  To restart the finder press and hold Esc, command,Option, and choose finder in there and restart.

  You can also just delete the Applications folder and then start the virtual machine.  Once that the virtual machine is started just enter the unit.  Entering the unit will recreate this Applications folder with the correct files in there.  You should always restart or restart the finder once this is done before it takes effect in the mac operating system.

• Working in a virtual machine of shared folders and not another...

  Hi, I'm new to the community but have worked with VMWare Workstation for about 9 months now. I have a set of 5 VM that I run on a regular basis, and I had successfully implemented the shared folders in each VM to a central folder on my C: drive host. I now have new versions of several of the virtual machine and I am trying to configure access to the same shared folder, but it will not be displayed.

  After you set up the information in shared folders in the virtual machine settings, I go into the virtual machine on my computer and expect to see under readers network, "Shared Folders on .host '. Who does not appear and when I try to map a network drive to //.host/Shared files /, it can't find the network.

  I compared the parameters between a virtual machine that has the Shared folder working and one who does not work, and I can't seem to find any differences.

  Here are some of my system details, if it helps:

  VMWare Workstation Version 6.5.2 build 156735

  Host of OS = Windows Server 2008 (64-bit)

  VM OS = Windows Server 2003 (32-bit)

  I've updated the VMWare tools in the virtual machine

  I have ideas of what I can try to get this working. Thank you!

  Try to upgrade the virtual hardware version 7 - maybe it does.

  Why don't you use the entries for the disks in cluster? -of course, you know that they are not stable in WS 6.5

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• You can edit vmx file while the virtual machine is running? And is it safe?

  You can edit vmx file while the virtual machine is running? And is it safe?

  Hello

  Moved to the forum of the Virtual Machine and the guest operating system.

  If you edit the VMX while the virtual machine is powered on change is not levied until the power off then power on (not reboot) and there is a good chance that the change will be deleted when turn you off the system. So it is not safe to do so.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• Cannot start area Planner and the server process in the machine virtual App/lot

  Hello
  
  After the change of /etc/tnsnames.ora in the machine virtual App/Batch:
  
  [Psadm2@psovmab LOG] $ /etc/tnsnames.ora more
  H91TMPLT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.133) (PORT = 1521)))
  (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = H91TMPLT.corp.peoplesoft.com))
  )
  
  I can't start Task Scheduler field and the server process:
  
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 197 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 198 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)

  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 793 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec BBL - one:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 773 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 495 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  Try to start...

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 801 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSWATCHSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSWATCHSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSQRYSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSQRYSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSAMSRV o ./LOGS/stdout e ./LOGS/stderr - A - APPDOM d s PSSAMSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKHND o EI ./LOGS/stderr s PSBRKHND_dflt:BrkProcess - APPDOM d s PSBRKHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKDSP o EI ./LOGS/stderr s PSBRKDSP_dflt:Dispatch - APPDOM d s PSBRKDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBHND o EI ./LOGS/stderr s PSPUBHND_dflt:PubConProcess - APPDOM d s PSPUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBDSP o EI ./LOGS/stderr s PSPUBDSP_dflt:Dispatch - APPDOM d s PSPUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBHND o EI ./LOGS/stderr s PSSUBHND_dflt:SubConProcess - APPDOM d s PSSUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBDSP o EI ./LOGS/stderr s PSSUBDSP_dflt:Dispatch - APPDOM d s PSSUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSMONITORSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSMONITORSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JSL o ./LOGS/stdout e ./LOGS/stderr - A - d - m 5 - M 7 - //hrapp.xflash.com:9000 I have 5-j ANY - 40 x 10 - c 1000000 JSH w s:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JREPSVR o ./LOGS/stdout e ./LOGS/stderr - A - W Pei /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 774 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  
  Thank you

  Please, once you connect to the application server Peoplesoft VM with psadm2, run the following:

  env|grep LANG
  

  And post the result.

  LANG should be C, if this isn't your side follow these steps:

  export LANG=C
  

  And re-start the Appserver field.
  To keep consistency during the startup of the server, add the line in the psadm2 user .bash_profile.

  Changed the .bash_profile or any other initialization file? Because everything should be fine by default.

  Nicolas.

  Published by: Gasparotto N on December 30, 2009 19:09

• Machine virtual IOPS / s report, how to display the name of the data store?

  Hi guys

  I am new to the Foglight community, this is a great tool, and I learn a lot.

  Currently I am trying to create a simple table that will show me metric of my VMware environment: Virtual Machine name, Datastore IOPS and data store.

  However I can't find how to include data store name in the table, because it is not a measure of the Virtual Machine. I think I need to expand the scope of my table to include VMware Datastore, but I don't know how to do this.

  -Mark

  

  Check the options available it seems that it can be done with WCF (the frame behind the Foglight dashboards).  We recommend generally customers who plan to build views WCF take adequate training or our PSO people engaged in it.

  In any case I can help show a quick example of how it's done.

  Please try this on a local/test server.

  Go to Configuration > definition >

  

  Make sure that you are in my definition, and click the icon to add a view. then choose from the tables and trees - oriented line table

  

  Give a name to the view, go public and make a portlet/reportlet and apply

  

  Switch to the configuration tab and click the change for the lines and choose a query

  Under query, expand the VMware and scroll down

  

  Until you can select the query for virtual machines

  

  And press the set button.

  Your view should look like this

  

  Now you must select the columns.

  Each column has a value you can edit and there is a button + to add additional columns.

  Lets start with the name of the virtual machine - click on the button to change to your default column and choose the context.

  

  Click on the drop down menu to enter key and choose the current line (virtual vmware machine)

  

  Click on the drop down menu to access path and scroll down until you can select the name and then click on set.

  

  You have created a table that lists the names of all virtual machines.

  You can click on save. and then click test, choose a time and click the result. A new window will open a show the list you of virtual machines.
  From here you can continue to add additional columns, each time choosing the key entry in the current line and the path to the metric/string to display.

  For example, the name of the data store.
  I change the module

  

  Click the configuration tab and click the icon to add a column

  

  For the column value, that I chose defined context once again, the key input is the current row and for the path, I expand the node for the data store

  

  And scroll until I see the Proprietename

  

  If you save and test you will see the result

  

  Keep adding columns and the data you want, notice that you have arrows that allow you to control the order of the columns.

  Note that you can click Show advanced configuration properties

  

  This will give you the opportunity to see the properties of the extra table, such as header - giving you the opportunity to give a more meaningful name (name of the data store, the name of the virtual machine, etc.) to the column header.

  

  You can now go you drag and drop the table edge/report and under my eyes, you will see your new view

  

  Drop it in the main view

  

  I hope this has given you the starting point to build this table.

  As I said, I strongly recommend going through our WCF training if you plan build more custom views or hire software Dell PSO Organisation to help build you views that correspond to your need.

  Best regards

  Golan

• machine virtual Windows 8.1 under windows 7

  Hi, is it possible to rotate the machine virtual windows 8.1 on windows 7?

  Thank you

  Saad

  See the instructions:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-install-the-latest-Windows-10-build-in/2350040e-2f4e-4470-a4b4-143160dc51eb

  Windows 10 references, but Oracle VirtualBox can be installed on Windows 7 and configured in the same way to run Windows 8.

• Stretch machine virtual windows on two monitors

  Stretch the window machine virtual windows XP mode across two monitors.

  Windows 7, videocard, NVIDIA G Force 210, two ASUS 23 "monitors a VGA the other DVI

  I can stretch the other windows like adobe reader across two monitors, but the XP virtual machine window can be extended a bit bigger than a monitor. Virtual machine window can be passed a window to each other very well... just not expandable wide two monitors.

  It would be useful for a program of CAD drawing two pages visible at the same time.

  Thank you

  Hello

  The question you have posted is limited to Windows XP Mode and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

• Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  VM will be restarting inbetween fixing and explains the operating system not found.

  Please help me on this

  Thank you

  Anand

  What Linux distro are you trying to install?

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• Online migrate VM to another machine virtual exsi

  All the tools to do it? or copy only the external VM to a hard drive and stick it in another store of data exsi Server?

  Thank you.

  Migration online to at least a license vSpehere Essentials Plus 5.1. To migrate virtual machines between hosts independent, you could export the virtual machines to the Fiction and import them on another host or just copy them using e.g. Veeam FastSCP. Please keep in mind that copy approach swells all thin provisioned virtual drives to their full isze, then in this case use the import/export.

  André