Stretch machine virtual windows on two monitors

Similar Questions

• machine virtual Windows 8.1 under windows 7

  Hi, is it possible to rotate the machine virtual windows 8.1 on windows 7?

  Thank you

  Saad

  See the instructions:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-install-the-latest-Windows-10-build-in/2350040e-2f4e-4470-a4b4-143160dc51eb

  Windows 10 references, but Oracle VirtualBox can be installed on Windows 7 and configured in the same way to run Windows 8.

• Machine virtual Windows 7 - freezes\reverts of the screen when going from Windowed to full screen and vice versa.

  I use a Win7 box with a Machine virtual Win7 on it.  When I started using the VM, it should start and login and work very well.  Shortly after I started having the following problem.  It loads in windowed mode, so I me the welcome greenish\blueish after cutting inside.  If I wait for the Office to load, when I do the full VM screen, it goes full screen then the screen goes to the Welcome screen again, but it's just a static image.  It won't change until I have send a Ctrl-Alt-Del command.  Can I get the normal window with options for logging, start the Task Manager, etc..  If I press ESC or click Cancel, it will show the office and I can work on it without problem.

  If I leave full screen mode windowed after that, the same thing happens, except instead of the Welcome screen, I get the screen of Ctl-Alt-Del as a static picture.  Once again, if I send the Ctrl-Alt-Del command, then cancel, I get the office as usual and it will work until I have try to resize the screen again.

  Can someone help me understand what is happening?

  Thanks in advance,

  Joe

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  Hope this information helps.

• I have a problem starting up a Windows XP Pro Machine virtual Windows 8 host system (which has VMware Workstation 10.1).

  I am new to the virtual machines.  For several months I've been running a Windows XP Virtual Machine in an old machine of Windows 7 with VMware Workstation 7.0.  The hard drive is having some problems at times, so I thought that I could move the virtual machine on a new computer that has an OS 8.1 Windows and VMware Workstation 10.  For example, on the Windows 7 machine, I copied the directory with all the * .vm files and pasted into the machine to Windows 8. But when I tried to start VMware Workstation 10 in Windows 8 machine, I got the message "this virtual machine policies are too old to be run by this version of VMware."  I went to the knowledge base and used the solution described here: I've deleted the lines of three 'policy' of the .vmx file and added the suffix .ancien to the .vmpl file, which actually disabled.  Now, when I try to start the virtual machine, the black screen appears with the VMware logo in the Center and everything seems fine, but Windows XP starts.  And logo VMware guard churning away as in a continuous loop.  It is not easy to stop.  The only way to stop VMware is via the Task Manager or restart the machine.

  What must I do to get the Windows XP Pro VM to run in the new machine?

  VMWare technical support suggested that I have disable 3D acceleration (VM > settings > view and uncheck the box 3D graphics acceleration).  The virtual machine starts now with some minor problems, but it is usable.  But by closing accel 3D turns, in the words of the Technical Support Engineer, David, that there is "a problem with the graphics card not imitate or through its capacity to the virtual machine.  In other words do not support to the VM guest 3D acceleration. "My next step is to make sure that I have the updated driver for the Intel HD Graphics 4600 display adapter.

  Minor problems are:

  (1) the virtual machine works best in screen mode reduced.  There are a few problems speed mode full-screen.

  (2) the VM will still work after switching on of the host.  But after execution of the virtual machine, if power you the virtual machine and the release of VMware workstation, then later, start the workstation, the virtual machine will power not.

  To turn it on again you must out of VMware Workstation, disconnect the host machine and then reopen it in one.

• Implement the deployment of Machine virtual Windows Server 2012 with a data Bit Locker encryption?

  Hi all

  Is it possible to implement the feature data Bit Locker encryption on my Virtual Machine to Windows Server 2012 Std on the Platform VMware ESXi 5.1 vSphere update 1 ?

  The hypervisor is currently running on servers HP Blade BL 460 c G8 . Read well the hardware specification: http://h18001.www1.hp.com/products/quickspecs/14208_na/14208_na.pdf I see that he has taken a TPM installed on the blade, but I don't know how to make sure that it is activated or used by the Virtual Machine?

  Any kind of help would be greatly appreciated.

  Thanks in advance

  I had a few goes at it and it's not like you can virtualize a TPM. It would make sense if it was the case - the secure TPM was not designed to manage multiple instances of the OS.

  I ended up making USB passthrough on a USB stick and have the Bitlocker key stored on this stick as a demo. Certainly not a transaction supported, but it showed that the storage of key seems to be the only issue.

• Machine virtual Windows does not start on the MBP retina with 10.9 Mavericks DP3

  Mavericks 10.9 DP3 running on a MacBook Pro 15 "with Retina display 2012 and the TP2013 merger causes the following problem:

  None of my virtual machines created in Fusion 5.0.3 will begin.  I have Windows 2008 R2 and Windows 8 x 64.  I also tried to create a new virtual machine from Windows 8 x 64 with all defaults under the technology preview, and the same problem occurs just after the BIOS screen clears, and above all expected Windows 8 installer would (do not press any key to start from DVD, etc.).

  VMware Fusion has encountered an error and has stopped Windows.

  Click on restart Windows to start Windows again. Click report to collect data and to ask the support of VMware.

  [Ignore]     [Report...]     [Restart Windows]

  Ignore everything stops the system down

  I have reports of existing Windows Server 2008 R2 and Windows 8 x 64 virtual machines as well as the test of the virtual machine.

  Windows 8 x 64 gives this error in a black translucent dialog box appears when starting a VM Windows 8 x 64, nine (before installation) or not:

  No 3D support is available in the host.

  3D virtual machine functions will be disabled.

  Windows Server 2008 R2 VM will display the EFI boot screen, then if you press F8 and choose recovery it will start loading the recovery files, but when it gets to the point where windows graphics loading screen with the Windows logo would be (after "Windows is loading files" text screen with the bar at the bottom, but before the GUI) you only ever see the graphic display and it crashes

  Opening of Fusion 5.0.3 and closing the Tech Preview, the virtual machines will be load without problem; no boot time error either.

  Seems to have something to do with the graphics, but still - no similar problems with 5.0.3

  Hi Siobhan,

  Thank you for reporting this issue. I checked your vmware.log and found this problem has been reported by an internal user, the internal PR is 1047175. Now it is fixed in the latest internal version. Since 10.9 comes after tech Fusion preview release, the issue is expected. Please be patient to wait for the next release of Fusion. Thank you.

• Update the VMWare tools on all machines virtual Windows

  Is it possible to use the PowerCLI update the VMWare tools on all virtual Windows machines to the latest version. I know I can do this individuall but I wanted to see if there a way to use something similar to a for each loop through a virtual machine at a time. I'm new to the power of vmware and the vix api cli and it's the first task I am trying automate (automating installation of all guests including linux would be perfect if I could loop through all clients using the same command). I am a new detailed explanations would be greatly appreciated.

  Thank you

  Loren

  It's pretty simple in his PowerCLI, you combine just 2 cmdlets with a pipeline.

  Get - VM | Update-Tools

  You can make the choice of the guests a little more complex.

  For example:

  Get-VM-name Srv * | Update-Tools

  will update only the tools on customers whose name starts with SRV.

  See the cmdlet Get - VM for more details.

  You can also set it update tools should immediately reboot if necessary.

  What you can do with the NoReboot parameter on the cmdlet Update-Tools .

  Get-VM-name Srv * | Update-tools - NoReboot

• Keyboard shortcut to move a window between two monitors instead of drag and drop.

  I want a quick way to move a window from one monitor to the other in a double configuration monitor without having to drag the window with the mouse. This is particularly useful for full screen windows since to move, I have to exit full screen, catch them with the mouse and drag them to the other monitor. Ideally, I want something I can do with a keyboard shortcut.

  I don't know if this exists, I couldn't find it in a list of keyboard shortcuts. I think it would be an improvement for anyone to use multiple monitors which has good reason to need do to switch between several programs. Since windows looks at multiple monitors and identifies each in the settings of customization like 1, 2, 3, etc, it would make the most sense for me to have one high and one low. So if I have a window screen 2, I can hit a keyboard shortcut to move it to the same spot on monitor 1 (low) or monitor 3 (upwards).

  Maybe it exists in form some and I don't find it not, but if not I think it would be very useful, especially for anyone doing graphic design or programming work.

  (Also I filled out the form for that matter like windows 7, which is what I use at home, but he put it under the XP forum since that is what the computer I write from is running on.)

  Use the following key combination to switch between screens.

  "Windows key + SHIFT + key.

  Detailed instructions:
  Press in and hold the Windows key and then add and hold down the SHIFT key. While now hold both hit the left or right arrow key to move the current active window left or right.

• Satellite Pro C50 - A - BT does not work on a machine virtual Windows XP Home edition

  Hi people,
  We bought a C50 - A Pro of the Satellite with windows 7 installed to run a specific industry software that will work on win xp. We are running xp on a virtual machine that is installed.

  The problem we have will connect to a specific device by Bluetooth. While we are not very tech savvy, we are able to connect this device to other computers running windows xp, 7 & 8 use Bluetooth Assistant.

  The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

  We have v9.10.11 (t) of installed Toshiba Bluetooth stack. We were in the guide-utility Toshiba Bluetooth and checked for the updated driver but are always blocked.

  Can anyone tell if there is something specific to the Toshiba we have not been able to identify? Assistance would be greatly appreciated.

  Best regards, evil.

  > The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

  Any news? Have you found a workaround?

  I don t use the virtual machine and to be honest I m not very well why you can not connect to the other BT device but in my opinion the question isn't associated with the battery of Toshiba BT from the stack seems to work correctly because the BT device is recognized properly.

• Questions about the allocation of multiple NETWORK cards in a machine virtual Windows XP Machine HOST/NAT or bridged?

  Hi all

  That is the situation. We have a Machine physics WindowsXP with 5 CARDS, all with static IP. Only be connected to the internal network without physical Internet connection is used.

  Map NETWORK 1 has a 10.34.78.241/255.255.255.0 IP Gateway 10.34.78.2

  Map NETWORK 2 has an IP 192.168.22.242/255.255.255.0

  Map NETWORK 3 has a 192.168.100.241/255.255.255.0 IP

  Map NETWORK 4 has an IP 172.27.254.240/255.255.0.0

  5 NIC has an IP 192.168.242.10/255.255.255.252

  I used VMWare Converter Standalone to do a P2V PC, which works well with the latest version of VMWare Workstation. All were brought to the course successfully. The virtual machine has 5 Networksas by the XP Machine of origin.

  I built a Win7 Machine with 5 physical NETWORK interface cards, I suppose to replicate the Windows original XP Machine, I need configure the static IP address of the new NICs as shown above and configure cards NETWORK the VM 5 HOST mode and use the virtual network Editor

  to adapt the VMS NICS? Or is there a better way to do it?

  Cheers for any help and advice that can be provided...

  If I'm wrong, you should be able to create a Bridged (vmnet) network for each physical card. Make sure that one (which is created by default) is mapped to a physical NIC dedicated rather than automatic.

  André

• Machine virtual Windows 2000, ftdisk errors and BSOD (twice a month)

  Hello

  We have a Windows 2000 SP4 installed to server with all possible updates of Microsoft Windows updates.  It's in our vSphere 4.1 environment which consists of 3 4.1 ESX hosts connected to an EMC SAN with NFS data warehouses.  Every once in a while ago and only this particular virtual machine will go belly up.  Basically, end-users will start to meet execution errors in their application.  Thus, we check the VM and notice a lot of pop-up windows and errors in the system for ftdisk event log (Event ID 50 {Lost Delayed-write-data}).  It gets to a point where you can not do anything in the server, then you will have to hard it turned off.

  After reboot, it will display the Windows 2000 splash screen and then a BSOD will appear with INACCESSIBLE_BOOT_DEVICE.  Whatever the choice of Safe mode, safemode w / Networking, last known good, etc...  Also try to attach ISO or a physical CD often freezes the vSphere client so hard to my intel core i7 PC for ever the same displays a CTRLALTDEL Task Manager.

  So the solution is to mount a this machine VMDK file to another virtual machine, then run a chkdsk on it, then remove.  To power up the virtual machine Windows 2000, he finally fill the trunk and automatically run a chkdsk on other partitions and difficulty many files, indexes, security descriptors, etc.  The server is online and the hosted application works very well.

  Audit in the newspapers, it seems that it has happened with this frequency (looking ftdisk warnings)

  02/11/2010 to 03/11/2010

  05/10/2010 to 06/10/2010

  29/09/2010 to 01/10/2010

  23/09/2010

  So it's a little sporadic.  The server gets used exactly the same every week, is not as if he was not less any activity between the 10/6 and 11/2, where it doesn't have the bomb on at all.

  Any idea on what is happening here?  If it were a real physical server, it would be all point to a failure of hard drive or scsi controller.  However, it is on an ESX host, as well as many other machines to talk to the same San, and nothing else has a problem.  It comes to our Windows 2000 Server only in our environment, everything else is 2003 or 2008.  The config for this VM problem is:

  1024 MB

  1 PROCESSOR

  4 MB OF VRAM

  VMCI limited

  Controller of BusLogic SCSI parallel 0

  30 GB thin provisioned SCSI (0:0) hard drive 1

  "Flexible" network adapter

  Nothing special or notable outside of a default virtual machine configuration.

  Thanks for your comments.  This one is perplexing.  Is not as we can 'swap hard disk.  Were in discussions with the vendor of the application for a migration to Server 2008, but I don't know when that will be possible (if this year or the first quarter of next year).

  If you change names like this - ethernet also remove NIC ghost?

  It is likely that your changes produces one or more of them - please check.

  I cleaned some entries in your existing file and transferred.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How a machine virtual windows xp running on a system 32-bit windows 7 with Server 7.1.1 license

  Not too long ago, I bought a desktop computer with windows xp sp3.  I recently bought and installed a windows 7 32-bit operating system.

  I want to run a windows xp sp3 virtual machine in vmware workstation 7.1.1. What I have to buy an additional xp license or can I use the provided when the system was purchased orginall.  If so, how can I get the activation key?

  If someone has done this, any help would be appreciated.

  If Windows is supplied with the equipment, it is an OEM version. You are not allowed to install than on any other hardware (same virtual) than that, it was sold with.

  Check here: http://www.microsoft.com/About/Legal/EN/US/IntellectualProperty/UseTerms/Default.aspx

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• machine virtual Windows 7 for xp, files became broken in xp

  Load Rockwell software to Virtual XP and after addition of XP updates for windows that it wiped out the files. Now I can't find the files that were loaded, I did a search, and windows cannot find files, even in deleted files. Where are the files stored in XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/XP-mode-restart-problems/53c27594-A212-49B2-887a-04c7a58aa118

  read James's response and ask your question on the link he provided.

• -Problem of activation Microsoft Office on new machine virtual Windows Vista

  I use a MacBook Pro on which I have just updated the Parallels Desktop virtual machine software.  This software has removed the earlier version (doesn't give me a notice, unfortunately, so my Office software deleted it from the virtual machine image).  Now, when I try to run office software in the virtual machine running Vista, I get a notice I need to activate the software.  When I try to activate online, I get a message that I've already activated all copies that I am allowed.  When I try to activate by phone, I'm going to "activate by phone" in the activation wizard, press the 'next' button, but then the activation wizard stops without giving me the phone number.  Help!

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• Machines virtual pretty bad performance but...

  Hi guys some info fisrt

  • 6 3.5u4 ESX - 1 Cluster - 1 resource pool all default values

  • 32 GB of RAM each ESX = total of 192 GB

  • 8 x 2.9 GHz CPU - Intel Xeon X 5770 eachESX.

  • See 3.1.1

  • 270 virtual machines virtual Windows XP SP3 - 1 vCPU - 512 MB RAM - power on throughout the day for the maintenance of workstations for customers light Wyse. Software used: Internet Explorer - third 2 apps - Word/Excel viewers

  • IBM DS4700 7 L EACH storage about 150 GB of available for each LUN - connected using Fibre Channel.

  This question is for 2 weeks now,

  07:00 - some people start work - they take calls and Clients use light Wyse - 30 people - so far everything goes well

  08:00 - daily to the Thin Client - 30 people - So far so good

  09:30 - nothing changes as people connected but start VM applications run slow victory, by clicking menu takes much displayed, Internet Explorer is very slow to is to open, if they try to enter the third-party application that they cannot see the application update - basically, they cannot continue worlkin.

  Interesting point here is and it has nothing to do with Vmware View is when you restart a virtual computer that is problem of you it takes about 10-15 minutes to be up and running again I want to redisplay the prompt for the user/pass. not all machines are restarted, juice 3 or 4 because they are completely unnecessary.

  11:00 - the virtual machines that have not restarted back works well and during the day stay VMs works very well although it has even more users since at 13:00 more than balls people to systems. Yes, it's a call center

  Any pointer what newspapers should check? or where to start Troubleshootin

  I don't really see any high use of the processor or memory.

  Is this OK this all power 270 VMs on even if only a maximum of 120 can be actually used.

  Any idea what could be the problem?

  and the most important fact here every day is he at the same time abot 09:28 - 09:32?  :| weekend even when the number of people is like 20

  CPU - memory usage

  Thank you very much

  I noticed you use Symantec.  Here's what I had to do to fix this problem in my ESX environment:

  -Plan the AV definition updates arrive after hours on the server.

  -Disable the 'quick scan' what happens when a client downloads the new updates of AV: http://service1.symantec.com/SUPPORT/ent-security.nsf/docid/2006032313184248?Open&src=tranus_con_sl&docid=2005052514152448&nsf=ent-security.nsf&view=docid

  -Reduce the number of concurrent clients updates the AV server performs, as well as the speed at which the AV server sending each update of butterfly.  I think I put mine 2-wire and a 750 ms delay: http://service1.symantec.com/support/ent-security.nsf/854fa02b4f5013678825731a007d06af/2e726ee5a5d07e538825740c006700cb?OpenDocument

  -If you have any regular customer AV scans, stagger their schedules so that you don't have multiple customers on the same LUN scanning themselves at the same time.