Similar Questions

• Problems with macOS Sierra?  This fix can help you.

  Hello world.

  I wanted to post a solution that I have developed due to some erratic behaviors that I lived with macOS Sierra (no sound, slow don't boot, sluggish performance,... etc.).  This problem all my problems:

  1. After the upgrade to Sierra, restart your system and reset the memory NVRAM and SMC
     1. Reset NVRAM - How to reset the NVRAM on your Mac - Apple Support
     2. Reset the SMC - reset the management system (SCM) controller on your Mac - Apple Support
  2. Start normally
  3. Restart
  4. Start in Recovery Mode (command + R) - on the recovery of OS X - Apple support
     1. Launch disk utility
        1. Click on your disk (should be above Macintosh HD)... .click on first aid and allowed to run
        2. Click on Macintosh HD... .click on first aid and allowed to run
        3. Quit the disk utility
     2. Launch of reinstall macOS and complete reinstall.  Be very patient.
  5. After reinstalling:
     1. Restart
     2. Reset the NVRAM new - How to reset the NVRAM on your Mac - Apple Support
     3. Reset the SMC again - reset the management system (SCM) controller on your Mac - Apple Support
     4. Start normally
     5. Restart
     6. Boot into Recovery Mode, once again (command + R) - On OS X Recovery - Apple Support
        1. Launch disk utility
           1. Click on your disk (should be above Macintosh HD)... .click on first aid and allowed to run
           2. Click on Macintosh HD... .click on first aid and allowed to run
           3. Quit the disk utility
        2. Exit the Recovery Mode and start normally

  Happy to help you with this,

  BrainSel

  I did disk first aid and tonight, tried to do a reinstall in Recovery Mode. I went into Recovery Mode, but nothing after that I said to reinstall Sierra (in fact he said that he would check if I was eligible, then I hit Continue, and nothing's happened over an hour when I left).  I also downloaded from the App Store, reinstalled Sierra and have exactly the same problems. But I'll try fortunately once again in a day or two after your specific guidelines, and it would be nice if it worked.  (I had all of your problems. Mine were the window of the mail attachment issues (opens and closes quickly or opens but not completely, so I can not upwards), network goes offline after I wake the computer from sleep, sleep sometimes takes three tests since the first time I try to sleep, he wakes up immediately.  But I'll give it a try and thanks to you and khati for the info.

• reminder for macOS Sierra notifications shows 1, but none here

  I am running the latest official version of macOS Sierra 10.12

  Everytime I turn on my MacBook, I see that there is 1 reminder on my reminders open it and nothing. I followed the steps from Apple on the deactivation of reminders in iCloud and turning them back top and restart and restart before reminders, no other results.

  Has anyone found a fix for this, that may be having the same problem?

  Here is a screenshot

  https://drive.Google.com/file/d/0ByXVe-9jcsAteFlLTHNRM3dRVFk/view?USP=sharing

  Hi there, HMILLER75. Thank you for using communities of support from Apple!

  It seems that if you get a reminder that there is not actually on your MacBook Pro, which has been upgraded to macOS Sierra. You have made a huge step in troubleshooting, but since it did not help I have a few extra steps for you.

  With the reminders on your Mac app, close it using the Menu option (callbacks > reminders Quit) then hold down the SHIFT key left while the reopening of reminders to clear the cache.

  Safe mode try if your Mac does not start -is not only recommended safe mode when your Mac is not put into market, it also erases the system caches and certainty that your Mac starts correctly.

  These steps should clear reminders inhabiting not actually on your Mac. Have a great day!

• macOS Sierra can fully shutdown

  Hi, yesterday I just upgrade my MacBook Pro for macOS Sierra, when I shut down my computer, it can close all the application and turn my screen in the dark, but my apple macbook light logo still on. I have to press and hold the power button to shutdown entirely. Can you suggest me a solution for this problem?

  Thank you!

  It is possible that your Mac is always indexing of files for Spotlight.

• iMessage with iOS 10 and MacOS Sierra

  Before upgrading to iOS 10 and macOS Sierra, iMessages sent from my iPhone seems also in the application iMessages on my MacBook Pro and my iPad 2 Air - and the same for all three devices.

  It worked very well in my opinion.  When I'm at my laptop, it is very convenient type of responses on the keyboard.

  However, after the upgrades, this connection has stopped.  Each unit is not to see the iMessages of others, although all three devices are signed on the same iCloud account.

  What is a reduction in function?  Or am I missing something?  I tried settings and preferences.

  macOS 10.12 (mid-2014 rMBP)

  10.0.2 iOS (iPhone 6s, iPad Air2)

  Thank you

  -bruce

  Hello

  Sign of iMessages (the Apple ID used) on all devices

  Drag the item in Messages app from green to white (close the application) on the iPhone.

  Quit the application on other devices.

  On the iPhone, open the application again.

  Wait for the number to check.

  While what happens opened the app on the Mac and the sign of return on account of iMessage.

  Once the iPhone number checked send an iMessages specifically to your Apple ID (enter it manually).

  If it works, add the Apple ID in Send and Receive on the iPhone version.

  Accept the UPS op on the Mac.

  (repeat for other signature devices in)

  Set the item "send as SMS.

  Check the iPhone joins the same LAN in the Mac WiFi settings is on

  Reset the transmission of text on the iPhone which will cause the Code number must appear on the Mac to put on the iPhone.

  Repeat for other devices.

  Basically, try a reset.

  

  21:28 Sunday. September 25, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• macOS Sierra intermittently detects only 2nd screen at 800 x 600 when you reconnect

  At work, I use a mid 2014 MacBook Pro retina 15 inch connected to two screens Thunderbolt.  One of the screens Thunderbolt is chained to each other through stroke, and then connect to with love at first sight.

  Normally throughout my day I disconnect and using my computer laptop away from my desk, but when I go back to my office, I usually use my MBP with the lid closed and just use both screens Thunderbolt.

  Despite this historically configuration works fine, after a senior officer to macOS Sierra 10.12 I met a problem when my laptop wakes up after his Thunderbolt poster.

  A screen will boot correctly at 2560 x 1440, but another display will not work at 800 x 600.  If I try and manually adjust the settings of resolution for screens, I can only select 800 x 600 for posting done.

  The MBP has two ports Thunderbolt, and if I change the port on which the pair of screens is two connected, the forced swaps of 800 x 600 monitor.  Anyway, once the problem starts, I'm stuck with an abnormal low resolution screens.

  If I disconnect the two screens, one of them, then reconnect their power cycle, I still have the issue.

  If I open or close the lid of the MBP, screen MBP works at normal resolution, but I still have the issue.

  The only solution I've found now is to restart my MBP.  Then the screens work normally.

  So far, this question seems intermittent, but I met it 4 times this week since the upgrade.

  Hello, Hello 165dB!

  Thank you for joining the communities Support from Apple! Looks like that or have problems running on exnternal Thunderbolt displays the MacBook Pro. Read this article for steps to get help with graphics issues on external displays connected to your Mac. It has some great, you can try to see if you can get the second screen works properly.

  Another option you can try is in this article: How to test a problem in another user on your Mac account. This will allow you to check to see if the problem is specific to the user or the system-wide.

  Kind regards.

• macOS Sierra is a buggy and crap OS

  The worst OS that apple has ever made. Model of MacBook Pro (Early 2015) is not close properly without a hard stop, after the installation of macOS Sierra. Still, it shows a window saying that there is a problem in my MacBook and should be stopped. Where can I get the OS X El Capitan? After the installation of macOS Sierra, my MacBook has become slower than before. Could you guys please fix the BONES of crap and buggy that come out?

  Which MacBook Pro mode

  What OS version you had before?

  El Capitan is available in the section of the purchase of your Mac App Store

  You have a backup TM you can restore from?

  Can you post the error message you received?

  Open the Console application in the Finder > Applications > utilities and look for entries of the log at the time of the problem.

  Have you tried:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• PSE 14 vs MacOS Sierra

  Dear experts,

  I have been using PSE 14 for several months under Captain El - so far no problem. Today I installed MacOS Sierra - after that it is impossible to start the Organizer in PSE 14, it's the message

  Photoshop Elements is already running but is not responding. To open a new instance, you must first close the current process of Photoshop Elements, or restart your system.

  That's not true, PSE is not running, the system reboots doesn´t help. However, it is possible to start the PES Editor.

  Help, please!

  Hi all

  Sorry for the inconvenience caused.

  An update to 14 Photoshop elements is now available on the Mac App Store, which has the fix of the number of launch items organizing on Mac OS X 10.12.

  

  You install this update and let us know if you have still any question asking.

  Thank you
  Blandine

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• macOS Sierra stuck on the Time Machine backup

  Its been 2 weeks now since I updated to macOS Sierra and my Time Machine backup is always stuck on "preparing backup" and I tried different disc backup on another partition but still no luck.

  Make sure that:

  o drive the TM is excluded from Spotlight indexing non-mandatory;

  o that all software anti-virus is disabled (especially Sophos);

  o journal of iCloud and other cloud services.

  o check this article: macOS Sierra: If Time Machine still at the stage of "preparation"

• Crashing apps and the slow performance since the installation of macOS Sierra

  Hello

  Im a user of long date Mac but displays the first time that I was pretty happy with everything that on my macbook pro for the past years... until I installed Sierra a day ago.

  Since installing everything works super slow and a lot of my apps hang and crash. Things are not rosy, here is my EtreCheck report - running current version 10.12 on my MacBook Pro (mid 2010) if anyone can help would be much appreciated. Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-07 16:52:11

  Download EtreCheck from https://etrecheck.com

  Time 06:53

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Apps are broken

  Hardware Information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7 (mid-2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 2

  1 2.53 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 371

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 256 MB

  Color LCD 1440 x 900

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour

  Disc information: ⓘ

  Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 86,37 (Go 31,68 free)

  Macintosh HD (disk 1) / [Startup]: 412,50 (GB 158,46 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 412.88 GB Online

  MATSHITADVD-R UJ-898)

  USB information: ⓘ

  Logitech USB receiver

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Huawei.driver.HuaweiDataCardDriver (4.0.6 - 2016-10-04) [Support]

  com [loading]. Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0 - 2016-10-04) [Support]

  com [no charge]. Driver Logitech.Unifying.HID (1.2.0 - SDK 10.0 - 2016-10-04) [Support]

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0 - 2016-10-04) [Support]

  NET [no charge]. Thomson.iokit.USBLAN_usbpart (1.6.0 - 2016-10-04) [Support]

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items is no longer function in OS X Yosemite or later

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  tasks of Apple 178 [loading]

  tasks of Apple 86 [performance]

  Launch system demons: ⓘ

  [no charge] 42 tasks of Apple

  tasks of Apple 167 [loading]

  tasks of Apple 95 [performance]

  Launch officers: ⓘ

  [performance] com Logitech.Control Center.Daemon.plist (2011-11-05) [Support]

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2015-09-18) [Support]

  [cannot] com.adobe.CS5ServiceManager.plist (2010-07-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-13) [Support]

  [cannot] com.teamviewer.teamviewer.plist (08 / 08/2015) [Support]

  [cannot] com.teamviewer.teamviewer_desktop.plist (08 / 08/2015) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2010-07-14) [Support]

  com.Adobe.agsservice.plist [running] (2016-08-19) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.apple.installer.osmessagetracing.plist (2016-09-14)

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.teamviewer.Helper.plist (2015-03-03) [Support]

  [cannot] com.teamviewer.teamviewer_service.plist (08 / 08/2015) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2010-07-16) [Support]

  [loading] com.adobe.ARM. [...]. plist (2011-09-13) [Support]

  [loading] com.adobe.ARM. [...]. plist (2010-07-14) [Support]

  com.nero.HSMMonitor.plist [running] (2016-10-07) [Support]

  Plug-ins Internet: ⓘ

  DirectorShockwave: 12.0.6r147 - SDK 10.6 (2013-11-25) [Support]

  OVSHelper: 1.0 (2010-12-10) [Support]

  OfficeLiveBrowserPlugin: 12.3.6 (2013-03-22) [Support]

  NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-09-18) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-29) [Support]

  AdobePDFViewerNPAPI: 11.0.10 - SDK 10.6 (2014-12-03) [Support]

  DivXBrowserPlugin: 2.1 (2010-12-10) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-14)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-29) is unable to contact Adobe

  iPhotoPhotocast: 7.0 (2010-07-14)

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-01-17) [Support]

  AdobePDFViewer: 11.0.10 - SDK 10.6 (2015-03-29) [Support]

  JavaAppletPlugin: 15.0.1 - 10.12 (2013-10-25) check the version of the SDK

  User Plug-ins internet: ⓘ

  Picasa: 1.0 (2011-03-29) [Support]

  Safari extensions: ⓘ

  DivX HiQ - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  DivX Plus Web Player HTML5 < video > - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  3rd party preference panes: ⓘ

  DivX (2010-12-10) [Support]

  Flash Player (2016-08-30) [Support]

  Logitech Control Center (2011-11-05) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% kernel_task

  5% WindowServer

  1% com.apple.AmbientDisplayAgent

  1% xpcproxy

  0% fontd

  Top of page process of memory: ⓘ

  Kernel_task 432 MB

  Mdworker (15) 430 MB

  Airmail beta 283 MB

  152 MB Finder

  Sandboxd 147 MB

  Virtual memory information: ⓘ

  476 MB free RAM

  3.53 GB used RAM (1.41 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 October 2016, 16:39:48 Self test - passed

  7 October 2016, 16:20:48 ~/Library/Logs/DiagnosticReports/Airmail Beta_2016-10-07-162048_ [redacted] .crash

  / Applications/Airmail Beta.app/Contents/MacOS/Airmail Beta

  October 6, 2016, 08:17:31 PM/Library/Logs/DiagnosticReports/App Store_2016-10-06-201731_ [redacted] .hang

  / Applications/App Store Store.app/Contents/MacOS/App

  October 6, 2016, 07:52:21 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-195221_ [redacted] .hang

  October 6, 2016, 14:37:32 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143732_[redacted].hang

  /Applications/preview.app/Contents/MacOS/preview

  October 6, 2016, 02:37:26 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-143726_ [redacted] .hang

  October 6, 2016, 14:37:22 /Library/Logs/DiagnosticReports/firefox_2016-10-06-143722_[redacted].hang

  /Applications/Firefox.app/Contents/MacOS/Firefox

  October 6, 2016, 14:37:18 /Library/Logs/DiagnosticReports/Pages_2016-10-06-143718_[redacted].hang

  /Applications/pages.app/Contents/MacOS/pages

  October 6, 2016, 14:37:12 /Library/Logs/DiagnosticReports/AdobeAcrobat_2016-10-06-143712_[redacted].hang

  / / Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat

  October 6, 2016, 14:36:50 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143650_[redacted].hang

  UNKNOWN PATH

  Try this first: what happens if you start in safe mode (hold down the SHIFT key during startup), the problems go away?

  Try this second in normal startup mode: what happens if you create a new user account and log in as that user, the problems go away?

  I'm not sure I'd worry about the plane crashes - it is listed as beta software

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• macOS Sierra upgrade questions

  Problems of bad battery life updated since El Capitan with macOS Sierra. "100% charged drains battery fast on Sierra for 2-3 hours only. Before the mac update OS Sierra, he could stay for 8-9 hours,". If we installed macOS Sierra and noticed that the battery life is empty very quickly on MacBook Air/Pro, iMac etc, please help me to solve the problem of this problems.

  Hey there,

  Nothing but hurt. It is a common problem in the Sierra. One of the reasons, you must take off the coast about obtaining the latest software. It can be a bit much. If I remember correctly, they do not have the issues of EL CAP battery until le.3 ou.4 updated. (this is the solution that allowed the 8-9) I would recommend just downgrading to El Cap, as I can't imagine that the loss in the life of the battery is useful for siri.   Just my 2 cents.

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system