MacPro is impossible to call to PC machine for the first time

Similar Questions

• Authenticate Passport company impossible Gmail for the first time blackBerry

  Hello!

  I recently returned to BB from a Samsung with Android phone.

  On my Samsung I could send, receive, read, etc... E-mail (Gmail) of the company where I work.

  On the BB I unfortunately was not able to get going (again).

  I was able to configure my Gmail private messaging standard on the BB but software.

  The bump is caused because the society Gmail is no standard Gmail, but corporate Gmail that gets redirected to the company's Web site first.

  Here are the steps required to configure corporate-Gmail on my Samsung.

  1. I go to settings and press 'add an account '.
  2. I press on "Google".
  3. I have type "existing".
  4. on the next screen that appears, I press the button menu of the phone and a
  Popup saying 'Sign-in browser' appears, I type this.
  5. the standard login screen Google appears, here I do not insert a mailadress to le-gmaildotcom, but I enter my e-mail address to ericssondotcom (yes I work at Ericsson) as username and insert my password.
  6. then I am redirected to the companywebsite. Here, I have to insert the username that I received earlier to log on the website of the company, which is different from my ericsson-company email address - I use (d) to connect to gmail. Password is the same good.
  7. after that I 'return' to the phone to configure some other settings.

  When I try on the BB, I quickly get a 404 error, with "the server cannot locate the page Web... check the URL, etc...".

  Any idea?

  You wanted more explanation?

  TNX!

  Hooray!

  Had, it's going!

  The steps followed:

  Opened my Gmail from the standard webbrowser on my BB.

  In Gmail:

  I enabled IMAP in my Gmail settings.

  Permit 2-step authentication.

  Created a "pasword App" for mail on Blackberry.

  Added my BB/webbrowser as being approved.

  On my BB:

  In 'Add account', I chose advanced, then IMAP.

  Username and email my business email address.

  Password the password to specific app previously generated in Gmail.

  Address of the server: imap.gmail.com

  port 993

  SMTP Username: same as email of company

  SMTP-serveradress: imap.gmail.com

  port 465

  

• Is there a way to test for the first call of a function?

  Hello
  
  I created a function (using other functions I created) to generate a dynamic hierarchy tree menu based on parentID and itemID etc etc - I'm sure you are familiar with this concept. It works very well, and there is no problem.
  
  However, I do all this build in a string, and then dumped on the page. Again, this works very well. However, because the function is called recursively, my class, the class = 'tree' repeat itself in each occurrence of the opening UL tag.
  
  I want to only this class to be applied to the first UL, but because it is recursive, I don't know how to detect if the function is called for the first time or 5th time, etc.. I mean something like:
  
  < cfif myFunction is called the first time >
  Add the class
  < cfelse >
  do not add the class
  < / cfif >
  
  Please see my attached code. It is fully functional. Please don't worry that all the other functions do etc, they work very well, but I need a way or a variable to test against.
  
  Any ideas?
  
  Thank you very much
  Michael.

  Kapitaine wrote:
  > Hmmm, I bet that the solution is simple, but my mind is frazzled! Haha.
  >

  Yes, it's simple, you test the Boolean value and it will be true if it is
  set to true for a recursion.

  
  
  

  
  
  

  
  

  #somethingStupid(5,true) #.

• Sound is played at the first time when it is called by VI

  Hi, I am creating a VI that creates bursts of noise of specific terms in the sequences. My problem is that the sound generation VI only plays the sound the first time it is called. I tried to put VI in a for loop to see if I can get to play several times, but no matter what I do it plays only generated sound once.

  I found the problem. Thank you. The problem was with the timer not reset in the loop (it fixed with a shift register) on second or other calls. Thus, the loop was ignored that the timer has been greater than the value specified after the first time through the loop.

• A safety class is not found in this JAVA virtual machine for the following reason: sun.security.x509.CertAndKeyGen

  I'm trying to start OUD 11.1.2.2.0 after a new installation on Windows 2008 Server (oud - setup.bat) and I see the following error. Any ideas?

  [18/Apr / 2014:13:34:04-0600] category = gravity CORE = INFORMATION msgID = 132 msg = The Directory Server starts the configuration of the boot process

  [18/Apr / 2014:13:34:05-0600] category = gravity CORE VIEW msgID = 458886 msg = directory = unified Oracle 11.1.2.2.0 (build 20131115153045Z, R1311150604) commissioning

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381717 msg = installation directory: C:\Oracle\Middleware\Oracle_OUD

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381719 msg = Instance directory: C:\Oracle\Middleware\asinst_1\OUD

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381713 msg = Information FMV: 1.8.0_05 - b13 by Oracle Corporation, architecture 32 bits, the size of the heap 652476416 bytes

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381714 msg = JVM Host: slc00dbh.us.oracle.com, running Windows Server 2008 6.0 x 86, size of 8177541120 bytes of physical memory, the number of available processors 2

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381715 msg = JVM Arguments: ' - Dorg.opends.server.scriptName = start - ds. "

  Exception in thread "main" java.lang.ExceptionInInitializerError: a safety class is not found in this JAVA virtual machine for the following reason: sun.security.x509.CertAndKeyGen

  to org.opends.server.util.Platform$ PlatformIMPL. < clinit > (Platform.java:132)

  to org.opends.server.util.Platform. < clinit > (Platform.java:85)

  at org.opends.server.util.CertificateManager.generateSelfSignedCertificate(CertificateManager.java:283)

  at org.opends.server.admin.AdministrationConnector.createSelfSignedCertifIfNeeded(AdministrationConnector.java:703)

  at org.opends.server.admin.AdministrationConnector.initializeAdministrationConnector(AdministrationConnector.java:182)

  at org.opends.server.core.ConnectionHandlerConfigManager.initializeAdministrationConnectorConfig(ConnectionHandlerConfigManager.java:356)

  at org.opends.server.core.DirectoryServer.initializeAdministrationConnector(DirectoryServer.java:2872)

  at org.opends.server.core.DirectoryServer.startServer(DirectoryServer.java:1539)

  at org.opends.server.core.DirectoryServer.main(DirectoryServer.java:9930)

  C:\Oracle\Middleware\Oracle_OUD > java-version

  Java version "1.8.0_05".

  Java (TM) SE Runtime Environment (build 1.8.0_05 - b13)

  The Client Java VM (build 25, 5 - b02, mixed mode, sharing)

  I used the following jdk based on the matrix and it worked fine:

  C:\Oracle\Middleware\Oracle_OUD>Java-version

  Java version "1.6.0_24".

  Java (TM) SE Runtime Environment (build 1.6.0_24 - b07)

  The Client Java VM (build 19.1 - b02, mixed mode, sharing)

• A virtual machine at the same time...? Which means that for Vmware replication

  Hi guys

  I read the Vmware 5.5 replication, and it says what I do not understand.

  I was reading the recovery process and he said:

  You can recover a virtual machine at the same time on the site replicated on the incoming replication tab

  what it means?

  I restore a VM and I have to wait until he said recovered to start the recovery process or simply means that a single virtual computer at a time and no group of the virtual machine can be recovered I can begin the process of recovery in 3 VMs at the same time, but I have to go one

  Thanks a lot guys

  Hello

  The second. You can begin the process of recovery for each virtual computer and they can go in parallel. However, there is no option to select more than one replication and begin the process of recovery in a single step.

  Kind regards

  Martin

• When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

  When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

  Hello

  When you say that the last two months are compressed. I do not have what exactly you mean by that. Is there a chance you can attach a screenshot of the same thing? Also let me know if there are any made VC-database activity recently?

• PowerCLI to deploy virtual machines at the same time

  Can I deploy multiple VMs usng PowerCLI, but they spread out in the order and with an error.  It seems almost easier to deploy them manually so that they are created at the same time and not one after the other.  I also want the static IP but don't know how.

  For now, I use a card file customization that indicates static IP and guest for this.  But he never does, he deploys the vms system then throws an error stating VC ' a specified parameter was not correct.  nicsettings: adatpter:ip. "I want to increment IP addresses on virtual computers deploy.

  This is my Basic .ps1 file content

  New-vm - vmhost vm04a.domain.com - name w2k8sp2s64qa14-vm-model Template_w2k8sp2s64qa - Datastore vm04a_storage OSCustomizationspec - w2k8sp2s64

  Can someone help me?

  1 assign static IP addresses

  2 deploy all virtual machines at the same time

  ...

  The parameter - RunAsync right on the New - VM cmdlet.

  She will continue with the line after the New - VM without delay that the cmdlet New - VM to finish.

• Non supported configuration of virtual machines for the fault tolerance. The operation is not supported on the object. When activating FT

  Hello

  I try to activate FT on a virtual machine that AFAIK ticked all the boxes for FT but I get this message when activating it. No clue as to what might happen or where to connect for extended information? This error message is too generic...

  Thanks in advance mates.

  Did you follow KB1019165-fault tolerant to fails to 42% with the error: not supported configuration of virtual machines for the fault tolerance

  André

• How to configure the virtual machine for the changes to forget

  Hi, I want to ask if it is possible together in the virtual machine for the changes to forget. For example - user run VM... make some changes in the configuration. Then come a new user has it want to have clear (without changes in the configuration) virtual machine. Is possible together closed the machine after changes lost?

  Sorry for my English.

  Thanks for help.

  Hi Polo939

  First, you will need to take a snapshot of the virtual machine.

  • Select your virtual machine

  • Click on "take a snapshot" on the right-hand side of the web interface

  Then you must configure the virtual machine to go back to the snapshot when it is turned off.

  • Click on "configure the VM.

  • Click the "snapshot".

  • Select "back to overview" under when you feed off option

• Geocoding takes VERY long for the first call in each session

  Hello
  
  We are moving to a system of very short response time where the user sends a query via mobile phone to our based Oracle server and the response THAT SMS must return a list of points of interest at a certain distance from the mobile phone.
  
  Previously we were using Oracle 9i, now we went to 10g (EE 10.2.0.4.0). Given that 10g supports geocoding out of the box, we intend to use it. What we are experiencing, this is when we create a new session, and then the first geocoding/reverse_geocode call takes about 1 minute in our test environment (that means 100% CPU load on the side of Oracle Server), the following calls are in the [http://0.1.. 0.6] second intervals. We only use sdo_gcdr.reverse_geocode () and sdo_gcdr.geocode () procedures.
  
  In a space book, we found:
  + "Note: the first call to a function of geolocation in a session requires several time (is longer) than subsequent calls." +
  "+ Is because the function must load and analyze arrays of profile". +
  
  Profile of tables do not change, why is he not analyzed at the start of the RDBMS and only once, not for each session?
  
  Is there a solution?
  
  Kind regards
  Tamas Szecsy
  
  Published by: Tamas Szecsy on March 7, 2009 10:30
  
  Published by: Tamas Szecsy on March 7, 2009 10:30
  
  Published by: Tamas Szecsy on March 7, 2009 10:41

  The patch that I suggest is precisely to allow the geocoder to work effectively in many countries. Its effect is to only load the profile for the country being geocoded. If profiles are loaded progressively as needed, avoiding the High overload at the beginning. With this patch, the first geocode a meeting is second.

  The time you specify (a minute for the first geocoded in a session) clearly indicate a problem. If this problem is not with bad indexes on the table of the region, you can check the box caching (CACHED_ADMIN_AREA_LEVEL in GC_COUNTRY_PROFILE should be 0).

  I think yiou need to capture a complete SQL trace of this first geocoded, so we can diagnose accurately what is happening.

  Albert

• Cannot use the network after the first time backup volume machine

  Hello

  After the update to OS 10.11.4 my MACs are unable to use the network backup volume more.

  The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use this device as a backup time volume machine (all systems 10.11.4).

  What I've done so far has been clear the volume (twice) and rename with different names than in the past. Than I started the new backups for all of my MACs. The fist backup works fine for all machines. After it says, that the first backup is over, and he tries to perform the second backup an hour later, it is said that the volume does not support the necessary functions of AFP.

  I am still able to connect to the volume via afp: / /... If the finder (go to). As long as I use the volume for a single machine works. If I announce a backup from another machine, it evokes this error.

  Any suggestions?

  Thanks in advance.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the 'Start-up' (without the quotes). You should now see messages in the log with the words "departure * backup," where * represents one of the words "automatic", "manual" or "standard".

  Each message in the journal begins with the date and time when it was entered. Note the time stamp of the last 'Start' message that matches the start of a normal backup. Now

  DELETE THE WORD 'Start' TO THE TEXT BOX

  so that all messages are showing and highlight the newspaper at the same time, you noted. Select the time-stamped messages since then until the end of the backup or the end of the log if it is not clear. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  If all you see are messages that contain the word 'Start-up', you clear the text field.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. Don't post any more it is requested.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• happy 40th for the first cell phone call

  Today - 40 years - the first cell phone call was made by Martin Cooper of Motorola using what yould become the Motorola DynaTAC 8000 x.

  Weight - 2.5 lbs

  Cost - about $4000.

  http://www.FOXNews.com/tech/2013/04/03/first-mobile-phone-call-was-placed-40-years-ago-today/?intcmp...

  Heres another 40.

  Can you imagine saying one of those people holding the phone/anchor in 40 years, he would be carrying a device that weighed a couple of ounces and had more computing power than the first lunar module? I have now, imagine what will bring the next 40 years.

• Error-50103 during the VI call for the second time

  I have a main VI who, after the initial installation, called a VI that reads and writes several times to a data acquisition (USB 6356). This VI subroutine is called several times for each of the stages of the program. On the first pass through, there is no problem. During subsequent calls to the sub VI, however, it throws error-50103. I've identified the task that resolves this error. I made sure to do a self-cleaning on the task, create the task outside of loops and stop and clear the task after all the iterations are performed. To check if it is only the following calls may cause the error, I created a simple VI who just ran the sub VI twice now, and there are no errors.

  Any ideas on what is causing my problem or why it does occur during subsequent calls to my VI more complex?

  A picture of the frame and the task which gives me the number is attached.

  Thank you!

  I finally found the problem, although it was not the task that LabVIEW had identified. The problem task was a separate sub - VI who was called from the main VI and the Subvi that threw the error. I got this task stopped and cleared and it's not like he has over the matter.

  Thanks to all who have contributed.

• Asked to make calls and send pictures at the same time. Possible?

  Hello

  its my first post here. I have very little experience working with BlackBerry. I've been playing with 9800 Simulator and some samples provided with IDE 6.0, I serched for slution to my problem with no luck.

  My question is: is at - there a Posibility to make an app, that would have a built-in single-list contacts with multiple phone numbers, will allow to call (with a built-in list contact phone numbers by pressing a button) and take pictures and email them during this call?

  App like this is a request for a doctor - it needs to be as user-friendly as possible, the person who has never used a Blackberry phone should be able to make calls and send photos. The idea is that a doctor during a call with another doctor would be able to take a picture and send it to the person he calls (or other) in order to consult.

  If my explanations are confusing, I will try to write differently.

  Thanks in advance.

  I am not the best person to answer, but if I understand correctly, simultaneous data and voice is possible, but depends on carrier and the type of wireless connection you - I think you need 3 g to do. With this reservation, it seems possible to what you are suggesting.