MacPro Late 2013 buzz
My MacPro years end of 2013 started to buzz. It is not the internal fan, but something else inside the case. The machine still works well, and no apparent problem, don't except a constant buzz loud enough.
I installed iStat Pro to check the abnormal times, or loads on the dual AMD over-pants 300 GPUs.Temps are less than 100 all sensors except the Die PCI and PCIe Switch Diode. I've been running the fan at the top for a while to cool things off, but remains the buzz. Any ideas what is the cause? The machine is less than a year, but just barely.
If it only happens with monitor, KB and mouse connected then it is likely the power supply. There are a few messages about this over a year ago
-Make an appointment at an Apple store Genius Bar.
Tags: Mac
Similar Questions
-
Options of the SSD in late 2013 Mac Pro update?
Options of the SSD in late 2013 Mac Pro update?
Mac Pro has 256 GB which is almost full despite the displacement of all the large files (Photos, downloads, etc.) out of the disc. I'm at a point where the Player update seems to be a must.
OWC option seems a bit of a hack using a slower drive and a controller.
https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013
MCETECH claims to use a new disk allowed Apple with trim shoring and the ability of bootcamp to use Windows (important to me).
There are eBay sellers who claim to use the running game in recent versions of the end of 2013 Mac Pro.
and
two sellers have a very high rating, but I don't trust eBay.
The MCETECH seems to ensure ongoing compatibility as it is a part of Apple.
Any ideas or experiences with the above or other good known options?
OWC option seems a bit of a hack using a slower drive and a controller.
I think you're bad read the OWC page. They propose to replace the internal SSD stick with their largest capacity SSD stick. The external box is only for you to continue to use the original USB key (perfect condition) as an external drive, if you wish.
-
"MacBook pro late 2013 15" blocks all the "Tine"
Hello
My MacBook pro late 2013 running El Capitan crashes without displaying message. Often when coding using Webstorm (very likely to be blocked), but even when you use the Sublime text or only browsers. I usually have a browser running (accidents that happened with firefox all there are chrome and safari) and a database driver.
This was already the case with the previous operating system, I've updated to El Capitan, and it changed nothing.
PRAM, SCM returns several times. Ran Diagnostics, any problem found. Brought to the Apple store where they performed different tests: no problems found.
He comes off abruptly, sometimes the crazy fan, the screen is black. I can shut myself off or it turns off completely by itself.
In the newspapers, I see no log corresponding to the date and time of the accident.
Look at this link:
https://support.Apple.com/en-us/HT201753
If there is a kernel panic report, post it.
Ciao.
-
Part number of MacBook Pro late 2013 SSD
Hello
I have acquired a used MacBook Pro late 2013 (A1502 - EMC 2678) a few months ago, in which the DSS had been removed.
I knew that I had to replace the SSD when I bought this MacBook and found on the ifixit site that I had to buy an SSD with a part number in this list: 661-1838, 661-8136, 661-8138 (256 GB SSD).
"I've finally found one on Amazon Market place, and the SSD was announced as follows:" (661-8136, 661-8138) 256 GB Solid State Drive - Apple MacBook Pro 13 retina "A1502 / 15" A1398 (end of 2013, mid-2014).
But when I got the SSD, I noticed that the part number is printed on it is '655-1803D", which is the part number for MacBook Air Mid 2013 - 2015 SSD.
I contacted the seller to an Exchange, thinking that they had sent the wrong item, but he told me that the product was properly advertised on Amazon and showed me his description which indicates that following:
Identification numbers:
-Apple part No.: 661-8136, 661-8138
-The printed part #: 655-1803, 655-1817, 655-1838
-Manufacturer B21: MZ-JPU256T / 0 *, SD6PQ4M - 256G, THNSN2256GSPS
So my questions are:
"Print" (those that appear on the SSD) part numbers are supposed to be the same as the Apple part number, or they are independent of each other?
Are SSD with part number cell phones compatible with MacBook pro computers A1502 655-1803 ' printed'?
Thank you.
If it is, in fact, a number of part of Apple on the outside label of the SSD it should be certified by the manufacturer to run in an Apple/Mac products. SSD information displays the drive model number in disk label utility. These Apple Certified SSD will run through multiple products of Macbook. I hope this helps.
Bravo!
-
iMac late 2013 10.11 OS crashes when you wake up from sleep
10.11.4 OS iMac late 2013
Sometimes freezes upon awakening from sleep. Symptoms include:
- Black screen with a mobile mouse
- A blank desktop (no icon) when using expose function
- Deterioration of the function so that the machine does not respond with the exception of a mobile mouse cursor
- After a hard reboot forced, commissioning several times with a prohibition sign
- I reinstalled the operating system
- Run firstaid
- Run the diagnostic mac
Only console records until the machine sleeps and is empty while crashing. This is a recent journal in the moment before he slept, rose and crashed.
28/03/16 3:59:57.578 PM Google Chrome support [823]: CGAffineTransformInvert: singular matrix.
28/03/16 4:00:23.300 PM awacsd [182]: InnerStore GetWakeInfoForZone: no external port for 1301249226.members.btmm.icloud.com.
28/03/16 4:00:23.954 PM awacsd [182]: InnerStore GetWakeInfoForZone: no external port for 1301249226.members.btmm.icloud.com.
28/03/16 4:00:23.961 PM awacsd [182]: InnerStore GetWakeInfoForZone: no external port for 1301249226.members.btmm.icloud.com.
28/03/16 4:00:43.543 PM TogglDesktop [372]: receiveSleepNote: NSWorkspaceWillSleepNotification
28/03/16 4:00:43.543 PM AirPlayUIAgent [339]: 2016-03-28 04:00:43.543054 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification
28/03/16 4:00:43.543 PM CrashPlan menu bar [466]: * WE ARE __NOT__ CONNECTED *.
28/03/16 4:00:43.544 PM CommCenter [276]: CSI telling to go to low power.
28/03/16 4:00:43.549 PM sharingd [293]: 16:00:43.548: scan BTLE turned off
28/03/16 4:00:44.534 PM WindowServer [183]: device_generate_desktop_screenshot: authw 0x0 (0), shield 0x7fdfb4313c00 (2001)
28/03/16 4:00:44.605 PM WindowServer [183]: device_generate_lock_screen_screenshot: authw 0x0 (0) [inf, inf, 0, 0] shield 0x7fdfb4313c00 (2001), dev [2560,1440]
28/03/16 4:00:44.644 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff2dd12c390 {name = _NSDoNotDisturbEnabledNotification}
28/03/16 4:00:44.644 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7fe271419b20 {name = _NSDoNotDisturbEnabledNotification}
28/03/16 4:00:44.662 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: NC disabled: NO
28/03/16 4:00:44.662 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: NC disabled: NO
28/03/16 4:00:44.662 PM sharingd [293]: 16:00:44.662: purged hashes contact
28/03/16 4:00:44.663 PM sharingd [293]: 16:00:44.662: discoverable mode changed to Off
28/03/16 4:00:44.663 PM sharingd [293]: 16:00:44.662: Scan stopped BTLE
28/03/16 4:00:44.671 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: DND enabled: YES
28/03/16 4:00:44.671 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: DND enabled: YES
28/03/16 4:00:44.671 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: update enabled: No. (subjects: ())
))
28/03/16 4:00:44.671 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: update enabled: No. (subjects: ())
))
28/03/16 4:00:58.679 PM powerd [53]: BUG in libdispatch: 15E65 - 1718 - 0x0
28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045748: wl0: TCPKEEP: locate_keepalive_data_new_uc: No. IPV4 base10, keepalive has not begun.
28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045757: wl0: MDNS: IPV4 address: 10.0.1.9
28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045762: wl0: MDNS: IPV6 Addr: fe80:0:0:0:8 has 63: dfff:feb4:10 c 3
28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045767: wl0: MDNS: IPV6 Addr: fdb5:4267:2f7:1:8 has 63: dfff:feb4:10 c 3
28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045772: wl0: MDNS: IPV6 Addr: fdb5:4267:2f7:1:895's: bd12:2d8c:adf1
28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045777: wl0: MDNS: 0 SRV REB, 0 REB TXT
28/03/16 4:00:58.000 PM kernel [0]: IOCTL unrecognized: 234 on 236
28/03/16 4:01:01.000 PM kernel [0]: PM response has taken ms 3227 (53, powerd)
28/03/16 4:01:01.000 PM kernel [0]: kern_open_file_for_direct_io (0)
28/03/16 4:01:01.000 PM kernel [0]: kern_open_file_for_direct_io took 18 ms
28/03/16 4:01:01.000 PM kernel [0]: open /var/log/SleepWakeStacks.bin file, size 172032, extensions 2 ssd maxio 2000000 1
28/03/16 4:01:01.000 PM kernel [0]: surveyed major file 1, minor 0, 4096 blocksize, pollers 5
28/03/16 4:01:01.000 PM kernel [0]: ARPT: 4951.192049: AirPort_Brcm43xx::powerChange: sleep system
What 'event' immediately prior to the onset of this bad behavior? Update/update OS X or other software? Adding hardware (devices)? Nothing at all.
-
Memory can be increased on a late 2013 Macbook pro of the retina?
Memory can be increased on a late 2013 Macbook pro of the retina?
It is welded in place and not extensible
-
iMac late 2013 OSX El Capitan - Fans Blazing at startup
Hello Apple community,
I've just updated to OS X El Capitan 10.11.2 version and now my 21.5-inch iMac late 2013 (16 GB of RAM, 3.1 GHz Intel Core i7) is blasting his fans constantly as long as it is turned. This behavior began as soon as the machine has restarted in update mode, update of OS X El Capitan. Now, whenever the machine is operated - same start-up and before logon! -, fans of the machine are on stronger that I've ever heard, and they stay at this level constantly.
Activity Monitor indicates that only 7.89% CPU is used by the system to the Max and 3.0% user, but usually sat at > 95% of processor inactivity levels. 6.87 GB of the 16 GB of RAM is being used (Google Chrome) but close all applications does not change the behavior of fan. Impact of energy remains at a level of reference, unless I open an application - then it spikes briefly before returning to almost zero. Disk seems very active. 4.16 GB read and 1000 MB > writing whenever I load the tab Network tab. seems active, but by far the majority of the data being sent is chrome, which - again-, when stop is not the problem.
I tried resetting the SMC and the PRAM, but no effect.
The fans turn on and go up to full power as soon as I press the power button and stay on until the computer has completely shut down. In addition, while resetting the PRAM, the fans went when I turned on the power first, then remained on all by pressing the P, R, option and command keys while the computer has been restarted.
I never heard my computer even use before fans, save for two instances when I was exporting a lot of audio in Cubase. Now they are on to what I assume is their top speed and they never again down a moment until the computer turns off.
Basically, as long as the machine has the power, it uses the fans at top speed.
I guess that's not very good for my machine.
Can you help me with this problem?
Thank you
Shrooblord
I also ran an Apple Hardware Test, and he returned with the PFM001 code that denotes a problem with the MSC. He advised me to go to an Apple store for repair. My iMac is still valid for the AppleCare warranty, so I guess I could do it.
But before I have return my computer, I want to know if you happen to have advice about issues related to the software maybe?
The problem started when I installed OS X El Capitan 10.11.2 - was not fans notice before that time. Would the update * really * screwed up my material of the moment where he started the installation? This seems unlikely.
-
Dell P2715Q + U2715H w / 15 "MacBook Pro late 2013
I recently bought a Dell P2715Q via the Dell Web site to run with my MacBook Pro late 2013 w/NVIDIA GeForce GT 750 M, Yosemite 10.10.2,"limited which I am very happy with 15".
I'm running the P2715Q via the Port Thunderbolt at full resolution 60 Hz.
I'm considering buying a U2715H to run as a second screen. Is it possible to run a U2715H display via HDMI port at full resolution 60 Hz?
I tried to launch a Thunderbolt Apple display through the second port Thunderbolt and couldn't get two monitors to work when the P2715Q ran in secondary mode STD to 30 Hz. ideally I want to save the second port Thunderbolt for my drive external HARD in any way.
Thanks for any help you can provide.
I don't know if this helps, but what are the maximum rates. The MBP supports the latter, no idea.
P2715Q
maximum resolution of CDM/DP 3840 x 2160 30 Hz or 60 Hz
HDMI 1920 x 1200 60 Hz maximum resolutionU2715H
maximum resolution of CDM/DP 2560 x 1440-60 Hz
Maximum resolution 2048 x 1152 HDMI 60 Hz -
5 k monitor with MacPro 6.1 (late 2013)?
Hi, MacPro with 2xATI FP D500 GPU with 5 k compatible monitor? Thank you
Double-cable displays
Some if poster with greater than 4K resolutions requires two DisplayPort cables to connect the screen at full resolution. With OS X v10.10.3 or later version Yosemite, 5K 27-inch Dell UP2715K display is supported on the following Mac computers:
- Mac Pro (end 2013)
- iMac (retina 5K, 27-inch, late 2014 and later versions)
- MacBook Pro (retina, 15 inch, mid-2015) with AMD Radeon R9 M370X
From:
Use screens 4 K and Ultra HD TVs with your Mac - Apple Support
-
Upgrade of RAM MacPro (end 2013)
I have a MacPro renovated (end of 2013), and I'll update the RAM. If I 2x16GB of RAM, does it matter which of the four slots I put them in? And, is there an advantage to get 4x8Go instead of 2x16GB? My thought is that if I get two sticks of 16 GB, I can always add two more down the road if I think that I need.
Thank you
Ed
Yes, BUT:
To date, 16GB DIMMS for these Macs is registered DIMM (they have an extra buffer registry on their products so that they will not overload the memory Bus).
DIMM not Exchange and "friendly game with others. If you choose ANY DIMMs recorded, you will be forced to remove all DIMMS not saved to get everything working properly.
The United States, OWC/MacSales has a program where they will allow you to sell a limited number of your old DIMMS for a little money when you buy them new.
http://eShop.MacSales.com/tech_center/support/rebates/memory.cfm
--------
The traditional way of installing DIMMs has been to put the largest DIMMS in slots more small number. This Mac Pro (end of 2013 dark cylinder) requires no pairs, gets a slight edge of pairs in adjacent locations (i.e., 1 and 2 or 3 & 4), but the differential gap is very, very small and should not influence what you buy.
-
MacPro end 2013 crashes randomly (panic)
Hi people,
I had my macpro since mid-2014... at the beginning I had a few crashes, but they are little random.
I thought that updates might fix the problem... but they did not.
most of the time... It's my feeling... This happens only when I have Adobe Premiere running and im, listen to music at the same time. But sometimes, everything goes well for 1 or 2 weeks then it happens again.
The computer is in similar low/setting turned off the power immediately.
I am really annoyed. as I always lose the status of my projects whenever this happens.
It is soft-oder related material? What do you think guys?
anyone with the same problems?
Check out the latest report of the accident:
Anonymous UUID: 89137DBC-2E20-5B5B-CC43-3DDDFCF4E5E3
Tue may 24 15:23:06 2016
panic (appellant cpu 4 0xffffff801c8550e6): "an element of the liberated area has been changed: expected 0xffffff80a4b00d10 but found 0x7acadede07b11007, 0x8535215ea3011d17 locks changed, offset 8 of 16 in the area: kalloc.16"@/SourceCache/xnu/xnu-2422.115.14/osfmk/kern/zalloc.c:461.
Backtrace (4 CPU), Frame: Return address
0xffffff807fadb6a0: 0xffffff801c823139
0xffffff807fadb720: 0xffffff801c8550e6
0xffffff807fadb760: 0xffffff801c852bbd
0xffffff807fadb7c0: 0xffffff801c852249
0xffffff807fadb8c0: 0xffffff801c82abff
0xffffff807fadb8f0: 0xffffff801cc51a92
0xffffff807fadb920: 0xffffff801cc51b20
0xffffff807fadb950: 0xffffff801cc51cc9
0xffffff807fadb980: 0xffffff7f9d970cea
0xffffff807fadb9d0: 0xffffff7f9d97369b
0xffffff807fadbee0: 0xffffff7f9d973413
0xffffff807fadbef0: 0xffffff7f9d9714d5
0xffffff807fadbf30: 0xffffff7f9d9b1e27
0xffffff807fadbf50: 0xffffff7f9d9b1dd6
0xffffff807fadbf70: 0xffffff7f9d9b1e4c
0xffffff807fadbf90: 0xffffff7f9d9b1f40
0xffffff807fadbfb0: 0xffffff801c8d7c67
Extensions of core in backtrace:
com.apple.iokit.IOBluetoothFamily (4.2.7f5) [E031EC60-DCA0-3BC6-8CB3-C2963C3E20B0] @0xffffff7f9d96b000-> 0xffffff7f9da09fff
dependency: ffff7f9d1d7000 @0xff com.apple.iokit.IOUSBFamily (686.4.1) [815E4F64-F2D5-3847-931A-BE755698D993]
dependency: com.apple.iokit.IOReportFamily (23) [A87989E4-9092-3C4E-B2AF-6F1E55955EC1] @ ff7f9d79e000 0xffff
Corresponding to the current thread BSD process name: kernel_task
Mac OS version:
13F1603
Kernel version:
13.4.0 Darwin kernel version: Wed Mar 18 16:20:14 PDT 2015; root:XNU-2422.115.14~1/RELEASE_X86_64
Kernel UUID: 8B1A8FD1-2344-36C0-A7F5-D9D485A995FA
Slide kernel: 0x000000001c600000
Text of core base: 0xffffff801c800000
Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)
Availability of the system in nanoseconds: 20734589654519
last load kext to 18691424779290: com.apple.driver.AppleUSBAudio 2.9.5f8 (0xffffff7f9f3cf000, size 303104 addr)
Finally unloaded kext to 18752876028380: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f9f3cb000, size 16384)
kexts responsible:
com.contourdesign.Driver.Shuttle 2.2
com Aladdin.kext.aksfridge 1.0.2
com.displaylink.driver.DisplayLinkDriver 2.4
at.obdev.nke.LittleSnitch 4246
com.apple.iokit.IOUSBAttachedSCSI 1.0.5
com Apple.filesystems.afpfs 11.1
com Apple.NKE.asp - tcp 8.0.1
com.apple.driver.AppleRAID 4.0.6
com Apple.filesystems.exFAT 1.4
com Apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.2.7f5
com.apple.driver.AGPM 100.14.34
com.apple.driver.ApplePlatformEnabler 2.0.9d7
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleHDA 2.6.3f7
com.apple.driver.AppleGraphicsDevicePolicy 3.6.22
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f5
com.apple.kext.AMDFramebuffer 1.2.4
3.5.13 com.apple.driver.AppleUpstreamUserClient
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleMGPUPowerControl 3.6.22
com.apple.AMDRadeonX4000 1.2.4
com.apple.kext.AMD7000Controller 1.2.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelMCEReporter 107
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleUSBHub 683.4.0
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBXHCI 683.4.0
com.apple.driver.AirPort.Brcm4360 842.21.65
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com Apple.NKE.applicationfirewall 153
com Apple.Security.Quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com Apple.kext.Triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f7
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f5
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOAcceleratorFamily 98.26
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.3
com.apple.iokit.IOBluetoothFamily 4.2.7f5
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleHDAController 2.6.3f7
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f7
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
3.1.7 com.apple.driver.AppleThunderboltDPOutAdapter
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOFireWireSBP2 4.2.6
3.1.7 com.apple.driver.AppleThunderboltDPInAdapter
3.1.7 com.apple.driver.AppleThunderboltDPAdapterFamily
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleThunderboltNHI 2.0.1
3.3.1 com.apple.iokit.IOThunderboltFamily
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640,36
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.driver.AppleEFIRuntime 2.0
com Apple.Security.sandbox 278.11.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 373
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com Apple.KEC.corecrypto 1.0
com Apple.KEC.pthread 1
Processor 3.5 GHz 6-Core Intel Xeon E5
Memory 64 GB 1866 MHz DDR3 ECC
Graphics AMD over-pants D500 3072 MB
Software OS X 10.9.5 (13F1603)
First of all see if remove/uninstall aps associated the following eliminated the problem:
com.contourdesign.Driver.Shuttle 2.2
com Aladdin.kext.aksfridge 1.0.2
com.displaylink.driver.DisplayLinkDriver 2.4
at.obdev.nke.LittleSnitch 4246
-
No keyboard and mouse during installation of windows 7 on IMAC late 2013
Hello
I have to install windows7 64 bit on end of 2013 21.5 "Imac.
I do everything the procedure with bootcamp, but during the first install of windows7 page appear the keyboard and the mouse does not work.
You need to choose "continue."
I've read many threads, but no one worked for me.
I made a usb bootable with bootcamp, I downloaded the driver from support of bootcamp for the specific model of the IMAC.
No way to go ahead with the installation.
Any idea?
Thank you.
Your USB installer will use a USB2 flash drive?
-
iMac late 2013 - Windows 10 questions
Hi, this is my first post so please bear with me
I am trying windows 10 pro on my iMac end of 2013, (2.7 GHz, Intel Pro Iris, 8 GB ram). I've always used assistant boot camp to create a removable USB with windows 10 and download windows support software is always checked. I use OS X 10.11.3 and my Windows 10 ISO is the Microsoft Web site. I followed all the correct steps and Windows has finished installing, BC seems to install and I went through the program. The installer always fails on the Realtek driver, at the moment where I looked up and he went around stopping the process in the Manager of tasks and then by installing the driver autonomous file in my USB. This was BC installed on my windows 10 and everything seems to work. However, using the computer for a few minutes in a black screen results following and then by the carillon of apple and the computer restarts, I then restore the windows 10 make it work again. After restoring I can connect to windows, but BC has now disappeared as well as all the drivers from the restore process. I have tried to reinstall several times with the same results. Today, after a restore, I decided to try and install not BC, I installed the wifi manually driver and once connected to the internet went into Device Manager to try to install the drivers from windows update. Most of the drivers were very good, although he offered an update for my Intel Iris Pro 5200 driver. The driver started installation although then I got exactly the same problem of a black screen, then a restore to return to windows.
I have now exhausted all I can think about trying. I reinstalled windows with BC several times. I did a clean install of El Capitan. I tried also, from 8.1 to 10 Windows but gets it Setup at a cycle restarts 75% gets stuck and comes back finally to 8.1 Windows, yet once I tried several times with the same results.
Any help is much appreciated as this has been driving me crazy.
I would like to post here Boot Camp
-
HOW CAN I RESET MY IMAC TO FACTORY SETTINGS AS IT IS SOLD, IT IS AN IMAC IN LATE 2013
IMac for sale and I can't put it in the factory as its new on the box setting is an imac don't thin no disk space purchased in 2013
Click here and follow the instructions.
(139602)
-
I have a MBP Late 2013 will pair does not with 6s on Blutooth
Read all comments (lots of old stuff on these communities) and tried all the suggestions of trashing the plist etc etc. Still unable to get my iPhone 6s to pair with my MBP end 2013.
For a fleeting moment after that match it says connected not connected appears.
AirDrop works, but my phone does not appear on the screen of the devices. If sending photos of the iPhone works well my avatar is not displayed as sender just my intials & where ever he gets the ints info not the name I use in my Contacts.
Someone at - it any idea what is happening. This worked OK until recently.
An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722
If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678
Maybe you are looking for
-
How can I view multiple tab lines?
I have so many tabs I want to display several lines. I can't find an option to do so, but I know that I've done in the past. But I do not remember how I did it. I tried to find this option in TabMix Plus but no luck. Recently I've been using Tree Sty
-
WHEN FIREFOX OFFERS ME AN UPDATE/UPGRADE, IT SIMPLY "WON'T DO HIS THING.
-
My HP 1200 printer is extremely slow, I reinstalled, still slow
My HP 1200 printer is extremely slow, I have reinstaled, but still slow. Someone at - it a phone # I can call to help me, I'm not too good at this. Thank you, Rick.
-
Hi, I've updated win XP to Win 7 ultimate. After you install the scanner software and when I open the CanoScan toolbox and try to scan, it says "Unable to select Twain Source". What should I do?
-
I seem to have lost my cutting tool that was on my taskbar. How can I get it back? Jim
I seem to have lost my cutting tool that was on my taskbar. How can I get it back? Jim