5 k monitor with MacPro 6.1 (late 2013)?

Similar Questions

• Dell P2715Q + U2715H w / 15 "MacBook Pro late 2013

  I recently bought a Dell P2715Q via the Dell Web site to run with my MacBook Pro late 2013 w/NVIDIA GeForce GT 750 M, Yosemite 10.10.2,"limited which I am very happy with 15".

  I'm running the P2715Q via the Port Thunderbolt at full resolution 60 Hz.

  I'm considering buying a U2715H to run as a second screen. Is it possible to run a U2715H display via HDMI port at full resolution 60 Hz?

  I tried to launch a Thunderbolt Apple display through the second port Thunderbolt and couldn't get two monitors to work when the P2715Q ran in secondary mode STD to 30 Hz. ideally I want to save the second port Thunderbolt for my drive external HARD in any way.

  Thanks for any help you can provide.

  I don't know if this helps, but what are the maximum rates. The MBP supports the latter, no idea.

  P2715Q
  maximum resolution of CDM/DP 3840 x 2160 30 Hz or 60 Hz
  HDMI 1920 x 1200 60 Hz maximum resolution

  U2715H
  maximum resolution of CDM/DP 2560 x 1440-60 Hz
  Maximum resolution 2048 x 1152 HDMI 60 Hz

• MacPro Late 2013 buzz

  My MacPro years end of 2013 started to buzz. It is not the internal fan, but something else inside the case. The machine still works well, and no apparent problem, don't except a constant buzz loud enough.

  I installed iStat Pro to check the abnormal times, or loads on the dual AMD over-pants 300 GPUs.Temps are less than 100 all sensors except the Die PCI and PCIe Switch Diode. I've been running the fan at the top for a while to cool things off, but remains the buzz. Any ideas what is the cause? The machine is less than a year, but just barely.

  

  If it only happens with monitor, KB and mouse connected then it is likely the power supply. There are a few messages about this over a year ago

  -Make an appointment at an Apple store Genius Bar.

  Shop Apple Store - Genius Bar

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode

• Desktop HP Pavilion 550-A17C: two monitors with desktop HP Pavilion 550-A17C? (Graphics, AMD Radeon R5)

  Hello. My computer is a HP Pavilion Desktop 550 - A17C with AMD Radeon R5 (integrated) graphics card. Can he take charge of two monitors? I did everything I can think of, including searching the Internet for a number of hours for solutions. For the life of me I can't get the computer to detect the second monitor, when I have two connected monitors.

  I connect the main monitor with a VGA cable and the second with a DVI cable. The computer only has a VGA connector and a DVI connector. There is no HDMI port (serioulsly and I bought this computer as three months previously, as a refurb...) (Lol).

  What I want to do, is extend the display. My hardware is unable to conduct two screens? A USB video adapter solve the problem?

  Thank you

  @AFL2016, welcome to the forum.

  First of all, make sure that you use a DVI - D connector:

  

  This is important.

  Here's a guide to help you with the installation.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Tecra S4: cannot switch automatically to an external monitor with APR 3 +.

  Hello

  I used a Tecra S4 (with Windows XP Prof.) with monitor 3 + and with an external 19 "Advanced Port Replicator. If I connect my laptop with the Port Replicator, it will automatically switch to the external display. I have to use the function "FN" to move."

  I signed up the external monitor with "use this device as the primary monitor.
  I don't have this problem with my other laptop Toshiba Tecra A3.

  Now, I think the problem is the geforce graphics card.

  Does anyone have the same problem?
  Thanks for the help and sorry for my bad English; (o)

  Hello

  It works with Tecra S4, too.

  Install new Modules of Commopn
  http://support.toshiba-tro.de/Tedd-files2/0/CMOD-en-20071119111948.zip

  Install the latest Toshiba laptop Extensions
  http://support.toshiba-tro.de/tools/Tecra/TS4/XP/TME/TME-TS4-XP-38400xp-en.zip

  Install the display device change Utility
  http://support.toshiba-tro.de/tools/Tecra/TS4/XP/DPL-change-drv/dspdevchge-TS4-XP-2500-en.zip

  Enter in Control Panel, start Extension mobile controls.
  Go to the tab 'Change of display device' and activate the Service.

  Now, it should work.

• Qosmio X 500 - 13R: picture on external monitor with resolution 2560 x 1440 is blurred

  Hi all

  I have a computer laptop X 500 - 13R Toshiba Qosmio, although 2 years, still a great piece of hardware.

  I just bought a new monitor 27 "U2713HM which supports a resolution of 2560 x 1440.

  Computer video card notebook (GTX 460 m) supports a resolution higher than through a digital connection, so I used a HDMI cable to connect.

  Via Control Panel Nvidia, I could create a custom resolution, but the image is not clear / is blurred.
  It is readable, but it's just not everything.

  Tried with HDMI 1.4, without success.
  I volunteered to connect through Dual Link DVI cable, but the phone doesn't have a DVI connector, and I doubt the adapter will help.

  Anyone has a suggestion how to fix this problem?

  Thank you.

  I would like to share my experience using an external monitor with a HDMI cable.
  My monitor supports both HDMI and DVI port.
  First of all, I plugged my laptop on the external monitor using a HDMI cable to HDMI.
  But the fonts and the picture was not clear. I used the resolution 1920 x 1080

  Then I went to the DVI port. I plugged the laptop s HDMI port to monitor s port DVI (HDMI/DVI cable) and that solved my problem.

  I'm not quite sure the relevance of m this could be for you, but it worth the try

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Double connection monitor with HP H8 - 1360T

  Just got a new HP H8 - 1360T with a Radeon HD7570 video card. I have two monitors with DVI and VGA inputs on them. They were both used with an older Dell dual mode. Unfortunately the double with the Dell adapter cable has a male end LFH59 (all pins) that will not connect the HP H8 - 1360T.  Is it as simple as getting the right cable? I see some references/DVI-I single and double as well as DVI - D single and double. I want to extend my desktop on two monitors. Can what adapter cable I get? Thanks for your help.

  Hello

  You said that the monitors DVI so use a native DVI cable to a monitor, and then a DVI cable to HDMI to the other monitor.

  To eliminate any problems check each monitor, one at a time on each port to make sure everything works before moving on to the next step.

  Go to the AMD Catalyst Control Center and set up a display EyeFinity group.  You should be put in place a group of 2 X 1.

  If necessary, go to the AMD web siteand download the latest driver for your video card video card.

• Two monitors with computer desktop Slimline?

  Hello

  I want to set up two monitors with my HP Slimline.  Is this possible?  I know I have to change the graphics card to accommodate two cords.

  Slimline s5310f

  64 bit

  NVIDIA GeForce 6150SE nForce 430

  LG E2360V LED monitor

  Hello

  You have options:

  1. install a video card that supports two monitors. -> the best performance option

  2. use a video USB adapter/converter.   -> What are your needs of video connection? VGA, DVI orHDMI

  3. use a USB attachable monitor such as this AOC 16 "monitor.

  Option #1.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• Tecra M5: Double monitors with docking station?

  Hello

  I have a Tecra M5 with docking station, in the past with other laptops, I was able to hook up a monitor by using the analog port and the other with digital and used both with the screen down.

  This seems not possible on this new, I have options to perform a monitor with the laptop or with a TV screen, but not two monitors to separate whole.

  Everyone was able to get this to work if so how? Graphix is the NVIDIA Quadro NVS btw.

  Thank you

  Hello

  It is very interesting, but all I know is not possible. I'm not sure at 100%, but for something like that you need a special graphics card that supports something like that.

  The same situation is with my Tecra. But the idea with two external displays is not bad. :)

• want to use 24 "iMac as a monitor with my mac book Pro but the iMac doesn't have a port thunderbolt

  Can I connect my iMac 24 "2.16Intel Core 2 Duo with single firewire ports and use it as a monitor with my MacBook Pro (thunderbolt port)? Thank you very much.

  EDIT: What year is your iMac? See if your iMac is supported by the target Display Mode using the link below. If your iMac, you can use a port Mini screen Mini display port cabe using your iMac on your MacBook Pro screen. I hope this helps!

  Use your iMac as a display with the target - Apple Support Display Mode

  P.S. The target Display Mode feature does work through Thunderbolt or Mini display port, you can do this via Firewire, as is any other protocol used to transfer files, not for input/output display.

• Monitors with speakers?

  One of the HP monitors have loudspeakers built-in and audio output ports that can connect to external speakers?

  Hello

  Check this box:

  http://www.NexTag.com/HP-monitors-with-built-in-speakers/products-HTML

  I think not only considered the monitor speakers is a good idea, you need many cables aound except pass by wireless. Just buy a monitor with speakers builtin (many brands autour).

  Kind regards.

• How to use two external monitors with my laptop?

  I have a new Pavilion dm4-301 d cl Entertainment PC.   My OS is Windows 7.   I'm used to using two external monitors with a docking station.   This new laptop lacks a docking station.  What should I do use two external monitors?

  Certainly not without a dock, but even with laptop HP well enough docks limit you to one of the ports on the external monitor, even if there are two on the dock. We used a device called an Atlona AT-HDPIX2 which is a USB to hdmi adapter. It provides a feature of third monitor for a laptop... use the native external port of the screen and the computer screen internal, then this device gives a third control that is fully configurable to display Windows 7 interface... clone, extend, etc.. It allows a full HD resolution and is pretty responsive for games even light.  HP does not have any true docking station for your laptop.

• PC HP 8560w: second monitor with Windows 10

  I have upgraded to Windows 10 and my second monitor will not work. On Windows 7, I was running my second monitor with a USB 3.0 port. Apparently, 10 Windows does not support this configuration. How can I feed my second monitor in Windows 10 using either a USB 3.0 or MIC port?

  Thanks in advance.

  Coltrane22

  I'm running an additional monitor in Win10 to a USB connection, but it uses a USB adapter / VGA, and to make it work, I had to install the drivers that came with the card.  Before that I did, Win10 has not even seen the monitor.

  Good luck