magnet mount accelerometers recommended by OR use with USB-4432

Similar Questions

• Multitask acquisition using NI USB 4432

  Hello

  Is it possible to perform tasks DAQ of tension HAVE (1) and (2) accelerometer at the same time using NI USB 4432?

  I am trying to program a LabVIEW GUI to read analog voltage and acceleration at the same time with the device. As the nature of the tasks is different, I put two 'DAQmx create Channel.vi' in the same pattern, with specifying one as 'I-voltage-Basic' and the other as "I-acceleration-accelerometer. When I run the VI, error - 50103 appears to help run the VI.

  Thank you.

  SH

  The USB-4432 has five input channels that share the same timing engine which means that they will share the same timing and synchronization. The five input channels are all part of the same atomic analog input on the 4432 subsystem. Even if the types of measure are different, you can add them to the same task. If you want to treat tension and acceleration differently (for each type of measure), index the strings in the array of channels acquired after your Read DAQmx.

• The SD cards are recommended to be used with the cDAQ 9133?

  Embedded controllers that are the recommended type and size recommended SD cards to be used with the cDAQ Win7 9132 and 9133?

  Hardware specifications for two controllers, you will find that the SD and SDHC cards up to 32 GB are supported.  There is no model or brand recommended, but there are 16 GB (783658 - 01) and 32 GB (783659-01) maps available for purchase through the OR.  You can find those listed in the accessories section available hardware user manual.  See the fees section of the controller product page for more details.

  EDIT: Linked to the UNIFIED and product Messaging page

• What is the recommended vNic to use with a 10GB network?

  We are to vCenter and ESXi version 5.1 and implementation of some new hosts on our new 10GB network.  I noticed that when you use the default e1000 vNic on a virtual machine, speed records only 1 GB.  When you use VMXNET3, it records correctly as 10 GB.  But I've read elsewhere that VMXNET3 is experimental.  Is there a best practice or recommendation of the type to use for the virtual machines on a network of 10GB?

  Paul Salotti wrote:

  But I've read elsewhere that VMXNET3 is experimental.

  The VMXNET3 is not experimental, it is has been around since version 4.0 from 2009, or something and is generally recommended for all machines where you wish to optimize network performance.

• Satellite M645 - Hang with USB modem

  Need help, my Satellite M645 (PSMPML - 00H 003) always hang using with USB specially if you use USB modem.

  Help

  Hey Buddy,

  Can you post more information about this behavior? The entire notebook to hang or freeze if you connect the USB modem? Is it so if you connect a USB mouse or a USB?

  What operating system is currently installed?

  If you have USB problems I recommend an update of the chipset driver. Have you ever done this?

• Equim A60 unable to use TV USB 2 card

  Hello
  I bought a new equim A60 with the following specifications:
  Processor speed: 2.8 GHZ
  RAM: 512 MB
  Hard drive: 40 GB
  I tried to use the MSI VOX TV USB2 card and Terratec TV card on the laptop, but all do not work with my laptop even though he has worked with other laptops and my desktop PC.
  I tried the same cards with my own friends who is also Equim A60 and don't worry too much. I upgraded my bios but always the same story. Can anyone help me or this type of computers is not intended to be used with USB 2 Tv cards?

  Hi, when you say not working does not that mean that Windows does not have
  detect the USB device as a new device?
  Try all 3 USB ports if nothing happens take a look at the device
  responsible for the yellow markers. Also if you have another USB
  connected devices remove them also.

  Richard S.

• What is the last recommendation on the use of Aperture with El Capitan system software?

  What is the last recommendation on the use of Aperture with El Capitan system software? I'm sure to BONE 10.11.x since I was a big user of Aperture?

  TIA,

  If you need a feature that has opening but Photos doesn't work, click here and follow the instructions.

  (141652)

• What is the best piano keyboard to use with a macbook air?

  Hi all:

  I would like to know what piano keyboards do you recommend to use with Garageband AND recording via my Macbook Air. I would have preferred a keyboard with many features - modulation of pitch, a good Bank of sounds, at least 6 titles, etc. I know I should have a MIDI output to work. I think maybe a CASIO, YAMAHA or maybe a BERRINGER. Can help you guys?

  Thanks a bunch!

  Rachael

  I have no preference, but try to get a compatible keyboard class requires no drivers to install, or there's plenty wrong with each update of the system on your Mac.

• Macbook Air using with mouse, keyboard, and external display?

  I want to put in place a more ergonomic work station. Can anyone recommend how I can configure my Macbook Air 13 "to use at home with an external monitor as well as an external keyboard and mouse? What is the easiest and most cost-effective way? Is a necessary dock if I buy a bluetooth mouse and keyboard, then simply plug the monitor each time? Could I use this set up with my macbook screen closed? I bring my Macbook to every day, so it must be easily plugged/unplugged. Thank you.

  A dock is not necessary. If you use a USB keyboard and mouse or a BT, it is up to you. I use a BT Magic Mouse and Apple keyboard in my office. That leaves just two things to plug: monitor and the power cord. When you use an external monitor as primary monitor you can close the lid of the computer and it will not go to sleep.

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• OK for use with a 3rd party charger?

  Wanted to buy the Motorola chargerof origin, but it is out of stock.

  I found this Blackberry folding blade charger for Playbook

  Can I use this charger for motorcycle G 2nd Gen? People say it's a quick charger, I don't know if this will eventually be a problem.

  Plug

  Input voltage: 110-240V AC

  Output voltage: 5V DC

  Maximum output current: 1.80 has

  @Link1320

  We tested the phone with our range of chargers. It can work, but I can't recommend using with another 3rd party charger.

  Mark

  Forums Manager

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7. How can I remove the Windows media Center programs recommended in the "Open with" section?

  I select which application (Word, Excel, etc.), they all open with Windows Media Center. This happened recently and I don't know how to cancel it. I see the Windows Media Center in the 'Open with' box where it asks you to "choose the program you want to use to open this file. How I remove it from the section "recommended programs"? I see that Internet Explorer is also in this section. What should be there as well? What actually belongs to this group?

  "I see the Windows Media Center in the 'Open with' box where it asks you to"choose the program you want to use to open this file"." How I remove it from the section "recommended programs"? »

  A pretty easy regedit should remove an application from the section "recommended programs". Here is a procedure step by step on how to do it. Unfortunately, I don't think that will solve your problem. What seems actually to have occurred is either your .lnk .exe (or maybe both) have inadvertently been associated with WMC. Out of the list of the programs recommended for the open with dialog box will not change. In fact, the next time that you open the program, it will open in WMC and add automatically return a program recommended in the open with dialog box.

  There really should not be whatever it is that you open a .lnk or .exe with because you really don't want to open them... you want to run. To determine if the .lnk or .exe associated with wrong, you can either watch the extension file associations in the control panel > programs, or you can see if it's a shortcut or the actual executable file that does. Need to know who, or if she is at the same time, in order to complete the fix.

  Once you know it, this link will show you how to restore the default file type link. Matter of fact, now that I think of it, it wouldn't hurt to just restore default settings for .lnk and .exe.

  "I see that Internet Explorer is also in this section. What should be there as well? What actually belongs to this group? " I may be wrong, but I do not believe, you should really see anything in the open with dialog for a .lnk or .exe. Again, you don't want to really not open them... you want to run. The shortcut .lnk file goes to the executable and runs the .exe program.

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• What is the best CMS for use with DW - CS6

  DW CS6 using, what would be the recommended CMS to use?

  Ok.  Well boom is a good starting point.  But there are moments where it may not be the right choice.  There is no one-size-fits-all CMS.  They are big, small, and all the rest. So base your choice on the following criteria.

  • needs of the customer,
  • ease of use,
  • budget,
  • coding skills necessary to deploy it.

  OPEN SOURCE:

  ================

  Get some Simple CMS-

  PHP, no database required.

  http://get-simple.info/

  WordPress

  PHP MySql & required

  http://WordPress.org

  COMMERCIAL

  ================

  Adobe Business Catalyst (subscription includes CMS & web hosting)

  http://www.BusinessCatalyst.com/

  You might also be interested in the products of the Web help to build your own CMS:

  CSS Web sites customized in Dreamweaver with extension Design | WebAssist

  Nancy O.