MagSafe charger light on fade then off

Similar Questions

• HP dv6 Envy: battery, do not charge, the light goes blue/red then off

  Slowly, the battery started not charging, the day before he arrived he was in charge, but that once plugged waiting a bit with it, or I have to turn it off and keep the adapter to plug again. In its sequel, the light is not on to signify the load and it does not charge. When the laptop is turned off and I plug in the power adapter, it goes to a blue light, red light, then in the same model, do not at all support. I wonder if there is a problem with the battery, solder or simply the motherboard itself. I tried a new power supply and took out the battery, when its plugged in without the battery, pressing the button power turn on turn on for a second, but it used entirely and the charging light will also turn off when it turns off, but immediately return to solid when its completely off with battery blue.

  Hi @ActingDemicky,

  Do you have completely replaced the power adapter, power cord and I tried to plug different?

  Try the procedure described in this document to see if they solve the problem:

  Win 8 and 10: http://support.hp.com/us-en/document/c03513214

  Thank you

• Laptop computer CHARGER is turned on and OFF from time to time.

  Hi guys...

  I use an HP laptop and the Windows 7 operating system. Product name-Compaq 420, product number WT919PA #AB4.

  Today, I found that the light on the wall cell phone charger (orange led) is flashing (on and off) from time to time (once it is turned on and wait a few seconds, it is DISABLED. Then again, it is activated) when I pluged in charger. This continues. It is so to charge and then does not charge. I checked the status of the battery using HP Support Assistant, and it indicates the storage capacity of the battery is low.

  Can someone please help solve this issue? Why laptop computer charger light is on and off occasionally? Please help me guys!

  Thank you!

  Yes, it is OK to remove the battery.

  Remove the battery:

• How to create a Boolean value when it is activated, it is an iteration and then off the back

  Hi all

  I could not explain well in the title, but I try to order a device that only requires a single click to move. For manual operation, a switch locked like OK button would do, but I'm trying to automate it.

  For example, if we have a digital control and a ' equal to '? a Boolean that is connected to an indicator. for example (if the number is = TRUE then 10) the indicator would remain on until what this number changes.

  But when I try to get, the led lights for iteration, then off. In addition, when I change the number to something is, I want the indicator also turn on then.

  If it is resolved, it would be useful to make the device to receive a SWITCHING signal to turn on once #1 is selected, and when I change the option he will receive another SWITCH to disable the #1 option.

  Your help is very appreciated!

  Hi malmureeh,

  you want to detect the edges of a Boolean signal, like the rise of the edges.

  There is a function of ready - to-available employment: BooleanCrossing!

• My macbook bettery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happened.

  My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.

  You can try another charger?

  Also-

   - Press the Option button and click it - system info - Power - post what is shown on the battery please

• Charge light is always on!

  If the charging (aka Lightning) on the front of my DV2 light does not turn off.

  It should only be on, obviously, when the battery is charging.  But when I run strictly on the battery and the power supply is disconnected, the light is on.  Even stranger is when the computer is turned off, the light is still.  The only way I can get the light turns off is by removing the battery.

  The thin battery charges, BTW.

  Problem solved:

  Thus, it seems that among the housing screws was pinching or coming into contact with the cable that connects the main Board and the power switch/lights card device.  When the screw is closely tight, it some ways quarrelled with the cable and the power light stay on, through the battery.

  Break the wide of the screw or the opening to the top of the case and by adjusting the cable fixed the problem.

  I am sure that very few people will encounter this problem, but he would come to the top, this is a possible solution.

  It was on a 1043CA HP DV2, but will be the same layout for all DV2 notebook computers.

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.

• SVF152C29M lights when the charger. The charging light also lights.

  I checked the charger, it gives about 21.5 V and I opened the laptop and it seems to have the tension on most of the components. Windows warned me that the battery has been a failure. Is it possible that this laptop won't turn on because of a failed battery and that it also doesn't turn because of the battery charge light? I tried to measure the battery voltage and the best I get is 0.5 V. It has even boosted to 1V, but quickly dropped to 0... So my main question would be, is it the battery or motherboard. The battery model is VGP-BP35A

  An update of the situation:
  New battery arrived today and it solved the problem. This laptop does NOT work without a battery, or the light on the laptop when it is connected to the charger without the battery inside!

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• B1-850 Iconia, a 8 flashes acer logo screen then off continually. Will not power off / reset

  Iconia a b1-850 8 my son continues to blink from the acer logo screen then off continually. Attempted to maintain the power button / stop to + 30 secs and also tried hard reset, but nothing works. Do not cut keeps blinking in and out. Can someone advise? Thank you

  its ok no worries, you will have to wait until the battery is discharged, after having discharged, recharge it then it will normally be in good state...

• Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash

  I have a Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash. I need help...

  The brother of contact support.

• HP Pavilion DV6710ea - starts and powers then off and repeats (no display)

  Hello

  I hope that someone here has the answer to my question, so this is.

  The laptop starts (be it battery powered off or just AC) for about 3 seconds, at that time, I hear the rotation of the drive upward and the fans but no beeps.

  I did the hard reset and hold the power button for 15 seconds without the battery or AC.

  The next of CAPS and numlock not LEDs in all during one of the sessions u power.

  I tried to replace the RAM and HARD drive nothing works.

  I connected external monitor for computer laptop and updated, but still the powers of unit turned off and then on and then off etc...

  Before this problem, the screen is blurry and dark, and then on the road.  Nothing has been spilled on the laptop to my knowledge.

  Thank you for your help with any suggestions you may have.

  Thank you

  Andrew

  Marvin: Behold, brain the size of a planet, and they ask me to take you to the bridge. Call this job satisfaction, because I do not have.

  Hello

  After the reinstallation of the hard drive & memory if you have the same problem. Please contact HP support and get verification from the motherboard replaced details of warranty with technical support.

• My screensaver lights up as programmed then off what it self.

  My screensaver will as scheduled then stops off the coast by it, s self.

  Hi ralphpc,

  1. it's going to happen all screensavers or any particular screen saver?
  2. have you made changes on the computer recently?

  Method 1
  I suggest you to try with different screen savers and check if they are correctly.

  Referral link: http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-saver

  Method 2
  I suggest you perform the clean boot, the following link will help you perform the clean boot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  

  http://support.Microsoft.com/kb/929135

  Note: Configure the computer in normal mode.
  A. Click Start, right-click computer and then click on manage.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  B. in the console tree, click Services and Applications and then click Services.

  (C) in the part of details, right click of Windows Installer and then click Start.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Camera freezes on the friends screen, fine on mine, light will not turn off.

  When I video call on Skype my image of the camera freezes on my friends computer but still fine on mine. It happens anywhere between 30 seconds in the call to 4 minutes. For my webcam light stay on beside him, even when I cancel the video call. If I try to call again the audio works fine but I can't use my webcam because he thinks that it is already in use somehwere else.

  The only way that I was able to get the webcam light turns off and I can use that once again is to restart the laptop together, but even then if I try and video Recomposeur it freezes right up again. This happened for a while now, through several updates and it is really starting to annoy me.

  The computer I use is an Acer Aspire V5 - 572P and the webcam that I use is built in a.

  Try first update your driver Intel HD Graphics 4000 version matches Windows 8.1

  http://www.Acer.co.in/AC/en/in/content/drivers

  Version 8.1 of Windows is 10.18.10.3304. You have version 9.17.10.2884 installed (version of Windows 8).

  Also look for an updated for Atheros Wireless driver adapt.