HP Pavilion DV6710ea - starts and powers then off and repeats (no display)

Similar Questions

• HP pavilion 1410n starts and questions of fan pls help

  Hi everyone im new and here I need help with my HP Pavilion 1410n. Ive had my office stored for like a year since I have a laptop I don't use any, yesterday, I decided to take it to find some of the files I needed, but when I turned it on it does not start at all, and all this I can hear is the fan connected to the motherboard running non-stop and does not show me anything in the monitor.ive never had this kind of problem before Ive had for about 6-7 years ago until now since I bought it thanks in advance

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button

  Please post here your positives or negatives in your thread.

• At the start of my imac I type my password it starts to load then goes off when half way... advice?

  When you try to start my imac, it begins to read the files, then off to half way.

  One of the reasons could be an extension conflict. This happens when you see icons in the lower part of the loading screen? No difference if you press and hold down the SHIFT key during startup? Knowing the exact iMac model and the version of the operating system would be useful. Since this has been posted under Mac OS Classic (OS9, OS8 & System 7), I assume that the computer is running Mac OS 8.x or 9.x.

• Videos like AOL, start to play, then the video blanks out and the audio continues. If I run Firefox in 'Safe' Mode, it works. Disabling plug-ins does not work

  TED talks, videos, AOL and others will start with a flash of the video, then off. The audio continues. I deleted the plugins flash and quicktime - no luck. I restarted Firefox in safe mode and it works fine. I then rebooted and disabled all the plugins - no luck. Internet Explorer works fine.
  Any ideas?

  One of the characteristics of Safe Mode is that it disables use of Firefox hardware acceleration of graphics. This method works around incompatibilities with some graphics driver software.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after you quit and then restart Firefox.

• Since the update to firefox 10.0 (and then 10.0.1), the bottom of the Page, the Page Up keys, start and end work correctly. Is that what someone else has this problem, and are there any suggestions for a fix?

  for example, I read a Web page, when I push the bottom of the keyboard Page, sometimes nothing happens. Sometimes the page scroll a few lines but then does not continue to scroll down when I push the key several times. Sometimes the page immediately jumps to the bottom of the page; etc. Similar issues occur, in the direction towards the top, when I press the Page up key. The keys start and end are completely "dead", because the page does not move when I press them.
  It is important to note that all these keys work as usual when I open the browser Chrome or Internet Explorer, and other applications in which keys should be functional, so this problem is specific to Firefox.

  Hello

  Please check if still use the keys cursor to navigate through the pages is selected in Tools (Alt + T) > Options > Advanced > general and uncheck. This setting can also be turned on/off by pressing F7.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• Every time I connect to my windows user takes awhile so it starts and then hangs / freezes

  My laptop does not load. It starts normal and when I connect it takes 3 min just to show the wallpaper and just when everything seems to freeze. I get messages like "0xc0000006 failed, something igftray blah blah blah." There is also another for itunes/quicktime "(cela n'arrive parfois, selon si j'ai même arriver à obtenir pour le papier peint. Parfois il se fige/accidents avant) I can boot into safe mode [I am currently in safe mode] also, I tried to go into Device Manager and there is a warning sign next to ISATAP map." Looked this up and stays, it can be ignored. I tried to restore to a previous point, but for some strange reason, it does not show me when I go back. As soon as I click 'Restore' the computer starts and that I need to log in to the screen. \
  Things I've done recently to the laptop: I tried to put in a new stick of RAM, but the computer won't start so I took and how it was left. This may be the problem.
  The computer does not beep or anything. It is not just to load windows. The furtherest I got me I open Google Chrome but then it froze and the screen has decided to go black. Not empty, the screen was always on but he showed all black. Showed no mouse or whatever it is.
  Please help me because I have to take the plane in less than 8 hours and I NEED to take this laptop with me
  It's a Toshiba Satellite a205-s5880, Vista, 2 GB of RAM atm. Aries is for this type of computer I brought it critical judgment.
  * Whenever the laptop freezes / crashes, the sound of the RAM or what call makes a model/beat.
  I know this sounds childish but I have no idea on how to fix computers, so I gave it my best shot to explain what the problem is.
  IF I PUT THIS IN THE WRONG SECTION PLEASE MOVE IT TO THE RIGHT ONE *.
  Thank you very much.

  Hello

  After checking the above and according to the needs:

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer turns Off at the start and can not reinstall windows

  Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.

  Please HELP, it's so sad. I will not buy another Windows computer.

  ~ Paul Côté

  For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.

  This isn't their recovery process, Microsoft

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To reinstall from a Microsoft Vista DVD:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To install Ubuntu:

  http://UbuntuForums.org/

  See you soon.

  Mick Murphy - Microsoft partner

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• HP ENVY 20 d113w: power black screen turn off the HD does not connect drive CD can start to stop then + USB?

  I'm having the same problems... Screen, black power on... hard drive turn but I don't think there is a connection or not recognoised... CD starts and stops... PC will start and stop several times... activated in a dock hard drive & it works... tried to boot the pc with the external hard drive dock but no go... I don't think that the usb ports do not work... I checked the Cmos battery & it's ok... It is difficult to use the keyboard, because it is wireless and I don't know if it is a wireless sensor so that I can start with f11...  With broad back, I see a bit of light on the right (I think it's on the motherboard) that will flash on for a second and then on the road... Don't know how to check the graphics card or when he is on the back... I took it to office max and they said that it is probably a hardware problem & is not a software problem... Called HP and it is out of warranty so some help... I don't know here from here... I am concerned by the static method & son said, put a piece of aluminum foil... I am a 73 year old gram and could use some suggestions. Thank you

  Hi, thanks for taking your time to help me solve my problem of HP... I'll take all you have suggested and works with all this... You're an asset to the help of HP forum... aloha, becky

• Then bits started and stopped

  Hi, I was trying to update and receive this error code.  When I follow the steps and you try to start BITS it will not start.  I get a message that says: "the Background Intelligent Transfer Service service on Local computer started and then stopped.  Some services stop automatically if they are not in use by other services or programs. »
  I tried the troubleshooter for this and had no luck either. I am running windows vist and have tried

  http://support.Microsoft.com/kb/940520#appliesTo

  and paste the text following in Notepad and executed orders

  ipconfig/flushdns
  CD %windir%\System32
  del /s *.chk; *.tmp
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = auto obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  output

  I still have the same problem and have spent days looking for a solution for any help or suggestion would be greatly appreciated

  Hi YoPaulie,

  Thank you for the Microsoft Answers uisng forum.  I suggest that you check your system for corrupted files.  You use the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, clickStart, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I click on the botton of start and type msconfig and the area off I click Service and discovered that 80 Microsoft has been stop mark what's causing this and how can I solve the problem

  I click on start and type in msconfig research and a box has opened and then I click on the Service and 80 this was mark stop. They all register of microsoft corporation. I believe this, why I had some problem with my computer.

  Hello

  There may be no problem that many Services start and stop on request so everything can be normal.

  Start - type in the search box-> control of the superior and right click on - RUN AS ADMIN.

  Or Control Panel - Administrative Tools - Control Services.

  To check the default settings for Windows Services:

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to create a Boolean value when it is activated, it is an iteration and then off the back

  Hi all

  I could not explain well in the title, but I try to order a device that only requires a single click to move. For manual operation, a switch locked like OK button would do, but I'm trying to automate it.

  For example, if we have a digital control and a ' equal to '? a Boolean that is connected to an indicator. for example (if the number is = TRUE then 10) the indicator would remain on until what this number changes.

  But when I try to get, the led lights for iteration, then off. In addition, when I change the number to something is, I want the indicator also turn on then.

  If it is resolved, it would be useful to make the device to receive a SWITCHING signal to turn on once #1 is selected, and when I change the option he will receive another SWITCH to disable the #1 option.

  Your help is very appreciated!

  Hi malmureeh,

  you want to detect the edges of a Boolean signal, like the rise of the edges.

  There is a function of ready - to-available employment: BooleanCrossing!

• Trying to download a game that won't play, I asked for help on the game site and they start saying "click on start and then"Run". Try as I might I can't find "run". Any suggestions

  I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?

  I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?

  It is an older version of windows.  In 7 or Vista, click Start, and then use the search box - enter the article they say "run" and press ENTER.