Similar Questions

• I get this error message, the backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  Hey get this error message

  The backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  In the context of what?

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• The backup disk image ' / Volumes/Data/iMac.sparsebundle ' could not be found (error (null))

  Hello

  I have a 27-inch iMac late 2013, 3.2 Ghz intel Core i5, 8 GB 1600 Mhz DDR3. I get the tracking error when you try to save it on my time capsule.

  The backup disk image ' / Volumes/Data/iMac.sparsebundle ' could not be found (error (null))

  I have another iMac and Mac Pro that save in the capsule of time without any problem.

  Can anyone help?

  Thank you

  You try Time Capsule stop and unplug for 1 minute. Then reset the SMC on the iMac by Intel iMac LANDAU and SMC will reset and restart the iMac and restart the TC and retest Time Machine.

• Cannot access anything on google. This page could not be found error HTTP 404 "keeps coming back.

  I have a good internet connection and can get into my email account, but can not access google etc. "this page could not be found error HTTP 404" keeps on coming.  Can anyone help. Thank you

  I have a good internet connection and can get into my email account, but can not access google etc. "this page could not be found error HTTP 404" keeps on coming.  Can anyone help. Thank you

  If you get the 404 error, then your server is not able to communicate with the page you have requested. This could be caused by malicious software on your computer. It is also possible that there is a problem with your server or with Google in your area. Let's first eliminate the possibility of malware. Download, install, update and perform a quick analysis with Malwarebytes.org . In addition, is the computer that you are referencing the only computer on your network? If not, are you able to access Google using these computers? How long the problem has persisted?

• The host 'POP3' could not be found: error number: 0x800CCC0D

  Original title: the host 'POP3' could not be found. Please check that you have entered the server name correctly. _ account: '1', server: 'POP3', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  The host 'POP3' could not be found. Please check that you have entered the server name correctly.

  Account: '1', server: 'POP3', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D.Can't send or receive emails

  1. wrong venue for your question.
  Repost of networking, e-mail and online forum:
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  2. I would assume that you did not have the necessary information to configure an e-mail account.
  Call your ISP (internet service provider) or your mail server. Ask them to give you the following:
  E-mail address
  Your user name
  Password
  Name of the incoming server
  The name of the outgoing server

  Also ask if they can help you set up an e-mail by phone account, or if they have a Web site to show you how.
  They might be able to do.

  If this is not the case, here's a tutorial:
  http://Windows.Microsoft.com/en-CA/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• "iphbrbtf.dll the specified module could not be found" error starting

  When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• Message could not be found - error message

  New problem with Windows Mail - began just a day or two ago, but once again today. An email comes from my box, I opened the email and I find a blue Message and I cannot not lies - followed by "the content of this message is not found. Any help out there?
  Them

  The problem is not in itself, it's with the passage of scan e-mail for all Anti Virus NOD32 products.  They help, they add nothing, and they never really do is create problems where none exist.  Regardless of who / product v you use, do NOT install the scanner e-mail part, you can save you a ton of grief.

   Why you don't need your anti-virus program to scan your e-mail

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• message operation could not be completed (error 0x800f0214) of windows 7 with HP laserjet cm1312nfi

  Hi I'm transitionning to a new computer with windows 7 64 bit and I can download the driver from hp site but when I get to unpack it, I get the above message.

  Can someone help me with this?

  Thank you

  Hello Lucprovost,

  Please keep us updated on the status of the issue.

  I suggest you try to use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  You experience print spooler error messages after installing or upgrading a third-party print driver
  http://support.Microsoft.com/kb/2793718

  Also, refer to the suggestions marked as answer by moderator Dale Qiao Wednesday, may 5, 2010 01:22 in this link:
  http://social.technet.Microsoft.com/forums/Windows/en-us/4979f1a9-f54e-4c5f-8199-c98315dc53cc/error-adding-printers-on-Windows-7-client-after-deployment-0x00000709?Forum=w7itproinstall

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• I have Windows 7 boot receive the error - melesp.dll could not be found error message.

  I recently removed a Trojan horse (js/Medfos, js/seedabutor and win32/tracur) using a combination of Malwarebytes Anti Malware and Microsoft Forefront.   The two programs report successful removal of serious threats.   Now on startup, I get the error message:

  Users/shirley/AppData/Roaming/melesp.dll

  specified model is not found.

  I am running Windows 7 (64-bit) and Internet Explorer version 9 (9.0.8112.16421).

  Apart from this error at startup, everything seems to work OK.

  How can I fix or remove the error message?

  Thank you

  Shirley

  Hello Shirley,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, I understand that you receive an error during the startup of Windows 7.

  Now let us perform some troubleshooting. All the steps in the same order as listed.

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• All of a sudden, I can't open a PNG file in layers.  I get a message file could not be found. Help!

  I work with multilayer files in photophop CS6 creating composite photograph.  All of a sudden, I can't open the PNG files.  I get a message that the file cannot be found when I try to open it.  Can someone help me please?

  A quick search on Google turned up the news I knew vaguely.

  PNGs in layers are only produced by Macromedia (later Adobe Fireworks more) using a proprietary format that has never been publicly documented.  Thus, it seems that only Adobe Fireworks can open the png with the layers intact. Whether or not you can export these layers in another file format and to open in another application with everything intact seems to be up in the air.

  Fire of artifice is not updated anymore and it seems that Adobe doesn't have a plan for png supports layers and the proprietary format is removed.

  Some people seek to affinity as a possible replacement for Photoshop.

  However to quote some comments from their FAQ:

  FAQ - fireworks in layers of PNG and TIFF files in layers

  Since this question comes up often, I write a definitive statement.

  Files PNG Fireworks (layers)

  There is no such thing as "layered PNG.  The standard PNG does not define a way to store diapers and only deals with flattened images.

  Fireworks saves the data of the extra layer of PNG files in a proprietary format with a private label. A definition for this exclusive data has never been made public.  Saved by Fireworks PNG still usable as a flattened image of any application able to handle PNG files.  These applications will maintain the standard data and ignore the proprietary data of fireworks.

  Affinity maintains the standard PNG files.  But it cannot import or export data from the layer by using the method of fireworks.

  There is no hope that we will always be able to manage the data layer from Fireworks PNG files.

  We recognize that being able to handle Fireworks PNG files would be very useful for users of affinity.  If a public definition of the format of data become available, we will be able to address the issue.

  Layered TIFF files

  There is no such thing as "layered TIFF.  The TIFF standard handles only images flattened under the tags described to the public.

  TIFF allows businesses to record any additional tags for their own use. Adobe has recorded two private TIFF tags that allow them to incorporate the layer data in a TIFF file.  These tags are an extension and are not part of the standard TIFF Central.  These tags are used to integrate data layer PSD into a TIFF image, in addition to the standard rasterized image.

  Since affinity has a PSD importer, we are able to import data from the layer of a TIFF file if it has these tags.  However, given that this is handled by our PSD importer that is subject to the restrictions as standard PSD Import in affinity.  We clearly that while we aim to provide the best third party support PSD, we can never replicate 100% the way Photoshop deals and displays a PSD file.  Photoshop has its own approach to apply the transparency/alpha, vector and features of vector, layer effects and gradient masks.  This means that although we can offer the importation of what can be changed to a PSD file, the result will not be a reproduction of a one pixel that you see in Photoshop.

  We recorded our own TIFF tags for the incorporation of the data layer of affinity in a TIFF file, in a similar way to the data layer PSD. This is intended for the dams that use TIFF as their Exchange format.  When you save a TIFF file, you are given the option to include data of layer affinity.  This will help keep the editable document of several layer elements.  This obviously comes at a cost of increased size.  Our TIFF labels will use our format proprietary data and as such, cannot be used by the applications of affinity.

  -----------------------------------------------------------------------------

  Their admission that same PSD are not guaranteed to be a reproduction of a tone pixel that you see in Photoshop, combined with the use of the affinity of the TIFF layers and tags "our TIFF labels will use our format proprietary data and as such, cannot be used by affinity applications." is a bit worrying consequences for everyone who has the hope that affinity would be a complete replacement for Photoshop

• "The folder could not be found" error message

  I recently got Windows XP Server problems enough to make me reformat my hard drive and reinstall XP and all my programs. It resulted in different drive letter assignments from what I had before. I saved copies of my LR catalog in multiple secure places. When I open Lightroom and points to the catalog I get the above error when in the develop Module and an "offline or missing" error code when in the library Module. Of course, LR is looking for files where they were before. I had worked with image files stored on K:\ but now these files on H:\. I see three solutions: 1) do a re-assignment of drive letters in Windows. (2) move the files from the drive H:\ to drive K:\; (3) change the drive specification target in the LR (is this feasible?) catalog. Does anyone have comments on the merits of these solutions and the warnings to see along the way? TIA, njb

  Right-click on the missing top-level folder, and then choose Find MIssing folder from the context menu. This will open a dialog box where you can browse your way to the new location. Once selected, Lr should repeat the link to the missing files

  

• the operation could not be completed error 1035 com.apple.mobilephone

  I have phone 7 and a mistake on putting in place the reception of voice mail

  the operation could not be completed error 1035 com.apple.mobilephone

  Same error message, even tried operation. iPhone 6, iOS 10.0.1

• Backup problem: iMacG5.sparsebundle could not be accessed error null

  Hello

  I have an iMac G5, 27 "; Processor - 3.4 GHz Intel Core 17; Memory - 4 GB 1333 MHz DDR3; Software - OS X 10.9.5 (13F1808)

  Since yesterday, it was not able to Time Machine backup.

  The initial error was "iMac that G5.sparsebundle could not be found (error-1).

  I found a few tips here and there followed:-unplug TC; go to network/SystemPreferences, renew the DHCP lease

  Still did not work.

  Is passed to the next stage of advice:-open the TM preferences panel, remove the TC list of backup destinations, add in

  Still did not work.

  Error message has now changed to "iMac that G5.sparsebundle could not be found (error (null)).

  Is this a defective Time Capsule?  (This is the conclusion, in other similar post, I found that my error message ('null') is different from that of this post).

  Thanks for any advice,

  Lori

  I would ask here if I were you iMac (PPC)

• Operation could not be performed. (error com.apple.installer.pagecontroller - 1).

  When you try to install Lightroom 4 on my mac os 10.5.8 I get this error message: operation could not be completed. (error com.apple.installer.pagecontroller - 1).  Suggestions?

  You get this error message because your computer did not meet the minimum system requirements.

  Click the link for techniques:- http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

  You need 10.6 or later