maintain the test environment

Similar Questions

• Copy of VM's to the test environment

  I'm working on a project to create a test environment with a copy of three servers that exist currently in production.  The production and the test environment both run ESX 4.0.  The production environment runs on blades with iSCSI storage, the test environment will be a stand-alone physical server with enough disk space and RAM to run the three VM.  The test environment will be moved to a laboratory test on a separate network cannot be routed.

  I have the new side of VMware and my questions do I need to copy all of the files belonging to the VM (vmdk, vmx, vmxf, vswp), that I need to copy the logs also?

  use VMware Converter to convert to virtual appliance, and then import the virtual appliance in the new environment by using the Client vSphere4.

• Moving Consumer and Producer to the test environment.

  Hello
  
  Move when the consumer and the producer WLP 9.2.1 applications from DEV environment for the test environment what are the steps that we must do in order to get all the Federated pages/books/portlets of consumption of the test environment? We using the same hostname in dev and test environment, simply by changing the ip address of the host in the backend.
  
  Is that all we have to takecare specifically when we spread?
  
  Thanks in advance
  Rajesh

  Hello Renon,

  For option 2, I believe that the steps would be:

  1. Consuming portlets from the producer of staging environment
  
  
  2. Set preferences in the portlet Federated on the consumer and the test, keep track of what preferences have been on portlets for step 5.
     
  
  
  3. Propagate from the intermediate producer to the producer if necessary production - as long as the same ears and wars are deployed on the production and staging of producers, spread may not be necessary if it is used only as a producer.
  
  
  4. Spread all the portlets intermediate consumer to the producer of the production. The propagation tool will spread Federated portlets, but when it installs them to the producer of the production, the spread of WLP 9.2 tool is to assume that it points to same instance of producer than intermediate consumers. Since this is not the case for your installation, all of the custom federated portlets will be broken on the consumer of the production. If you have configured the consumer of production with the same producer handle that you used in the staging environment, Federated portlets that have never custom should work after propagation.
     
  
  
  5. By using the administration tools, remove these custom federated portlets broken consumer of production and re-create them, adding the preferences of step 2 and add them in the appropriate pages.
     
  
  

  Unfortunately, this is not a single task. Whenever you do not want to propagate staging to production, all custom federated portlet must be re-created on the production environment with appropriate preferences. This includes the portlets that you had changed a preference on and portlets that you had not changed the values preferably on since the last time that multiply you, because the propagation tool will overwrite these instances of portlet on the consumer of production with invalid portlet CCP handles.

  WLP 10.0 and later, the steps are much easier - you would just run the tool in spreading on the producers, while consumers and any customizations would be automatically transferred from the staging to the production.

  Kevin

• Running discovery failed in the test environment.

  I have a layer of 5.7configured in two VCM plant newly installed in a test environment. Whenever I run the detection using AD, it fails when I try to specify the name of the computer that I want to add, it fails. I installed no agent of vcm on the test computer. I also tried race discovered by its IP address by specifying the IP address after the discovery, it lists all the servers in the subnet and it also says the State connection access is denied. Y at - it a doc detailed steps on how to correctly configure VCM first time in the environment.

  The VCM Admin Guide contains initial configuration step by step information, and all assistants, such as the Discovery Wizard, have fairly detailed context-sensitive help. The online help is the main documentation for the VCM.

  In case you, I think you two or three problems:

  1. you must add an administrative account network which will be eligible for the domain that you selected LDAP query and may directly contact the machines, if you selected this option. This is done under the authority of Administration\Settings\Network. Add the account to the accounts available, and attribute to him, by domain or group of computers all Machines.

  2 (and maybe 3): write file system access denied message that you receive when you try to manually add a computer because either you are using a user account that does not have NTFS permissions to write to the Program Files (x 86) of \VMware\VCM\WebConsole\L1033\Files\Discovery_Files directory, or you use an administrator account that has rights , but you are running Internet Explorer on the manifold itself and have not started it "as Administrator" way UAC is blocking your right to write the file.

  Not sure about the question of the UAC, but the rest of this figure in the Administrator's Guide.

  See you soon,.

  Paul

• Reports after 8 hours of testing in a room of the test environment

  I'm thinking on how best to account for my results.

  Test configuration:

  Oven with a profile running for 10 hours. temperature increses and decreases during that time. I have 4 DUT in the oven and I communicate them. I'm just the communications test so if theres always communication we are GOOD.

  I have a model of batch processing. Am I on each Board, that I have to talk to and validate communications during times of 4 minutes. then I move with other USE. This cycle continues and continues for 10 hours.

  I have a loop like this

  While - oven still running is true

  synch batch

  My test (VI... Success, failure)

  synch batch

  end

  So I don't want to have 10 hours of data.

  in a case of I failed I would like to save the event. and at the end I would like to have a result. OVERALL TEST PASS.

  I wonder what is the best way to do it.

  I thought it is put and statement after my test... that if an error occurs to record the failure. If this is not the case, do not save anything. I think I might be able to change the property fron the declaration of the section or something like that.

  y at - it another smart thing to do. ?

  Thank you.

  Hey buton.

  The first three suggestions in this white paper will be probably useful to you in your application. Basically, you could use on-the-fly writing your report directly on disk instead of keep it in memory and use the "single view last results ' and 'Eliminate the results not held by the model' to reduce the growth of the report in memory.

  See results failed to complete your own needs, you can configure the report to display only failures by changing the expression of filtering the results in the report options dialog. The option "exclude Passed/fact/ignored" will have the desired effect. The finished report will always show the State overall USE in the header of the report, you will be able to see if the test of success or failure.

  I hope it helps to and let us know if you have other questions about this!

• GemFire fails in the test environment

  Our company is now two separate networks internally for the company's operations; a network is for testing and one for production. The production network has access to the public internet is not the case of the network tests. We have grids to Gemfire identical set up on both of those networks for test and production, respectively. The grids to Gemfire are images of mirror on the other regarding the names of hosts, the configuration and locators until we could copy the deployed .war (that we welcome each node Gemfire in a Web inside Tomcat application) from the test network to the production with zero configuration change network.

  Recently, we observed a strange behavior on the test network: Gemfire intermittent will become partially insensitive and will require a reboot to start to work properly. In particular, one of our CacheListeners stop shooting.  We have not seen this at all in the production network in the months we had the Gemfire living application in production, however, which happens quite frequently in the test network.

  I know this is a very vague description of the problem, but I was not able to isolate any more than this yet. It is very difficult to reproduce. Y at - it a possibility that something like that might be related to public access to the internet is limited on the test network? Gemfire requires a public internet connection for its licenses? This is the only difference between the two installations is naturally what we thought to look at first. Any other ideas?

  Tom

  Thanks for your reply. I was able to determine that there is a thread deadlock in the CacheListener that was only apparent in certain uses of test of the grid. I was able to fix the bug, and we have not seen the problem since.

• Virtualize 2 DC to create the test environment

  Hi guys,.

  I wonder if someone could help me find a solution.

  I mainly want to improve our main DC - which holds Exchange 2000 (Yes, I know DC should not accommodate exchange roles, but this has been done before coming here)-between Windows 2000 and 2003, and then later this year, I'm going to buy a few new servers and migrate completely (and virtualize!) for 2008 and properly put in place the field.  So before you go ahead and perform the upgrade on our production servers, I thought that I would give to virtualize the domain controller using the VMWare converter. Everything seemed to happen, but when I pulled to the top of the virtual machine (in an environment test, completely isolated from true DC) and ran "adprep /forestprep" he said that he did not because he could not replicate to the schema master role is maintained on our other DC.  No problem, I thought, I'll just do a virtual schema master computer and connect them and everything will be fine.  Of course, then the replication failed between the two virtual machines, because the USN differed so I know now that it is not as simple as that.

  What I want to know is the following: is there anyway I can get my scenario of two DC in a virtual environment to test the updates on WITHOUT cold clone? I'm just saying that I want to do without cold cloning because our main DC took 13 hours to fully virtualize it.  I know I can get round to again the error USN downgrade our second DC and then perform the other steps to do, but I want it to be close as possible DC production simulation and production servers can replicate perfectly, so this step will apply when I do my real upgrade.

  Any thoughts on how / if I can achieve this?

  Thanks for any thoughts.

  Welcome to the forums!

  What a NTBackup of the State of the system and do a restore of authority on a virtual machine?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• iSupplier external installation on the Test environment.

  Currently, we use iSupplier and have a DMZ server that we use for our Production environment. We have a need to be able to log on as a supplier when we are on our test boxes without using a server "test DMZ." I changed the POS: external to point to the same URL address internal our address but when I connect as a provider, I get the following error:
  

  The webpage cannot be found
   
   HTTP 404 
  
  Most likely causes:
  •There might be a typing error in the address.
  •If you clicked on a link, it may be out of date.

  The URL on the page fault reads as follows: http://testap1.garlandisd.net:8000/OA_HTML/fndvald.jsp
  
  Is there a way to make the connection work on our internal website for our test environments?
  
  Thank you
  Rob

  What version of apps? and meanwhile, please go through the MOS score.
  What values should be specified for iSupplier profiles POS: POS and external Url: Url internal [266376.1 ID]
  Allow access by outside provider to the user iSupplier Oracle Portal and Oracle Sourcing [308271.1 ID]
  Kind regards

• Need space for the test environment for windows server 2003 and sharepoint 2010 online

  Hello

  We are currently running in the locked-down environment and looking for an online service that would allow us to put in place about 4 servers Hyper-V or VM (2003) and implementation of SharePoint 2010 and SQL Server 2008 on them... Where EV may seek to purchase/rent the space for it?

  Thank you very much for your time and your answers!

  Hi Volodymyr G.

  I suggest you to search rental / purchase of space on the server.

• Query works well in an environment, but not in the other environment

  Hello
  
  I have a question that I am trying to run in two different environments.
  
  Test: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  Prod: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  
  Now the query runs fine in one environment and fails in the other environment.
  It gives following error.
  
  
  ORA-01861: literal does not match the format string
  01861 00000 - "literal does not format string.
  
  The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
  
  The same query works very well on the TEST environment and the PROD environment.
  
  Any help related to it would be appreciated.
  
  Thank you
  Mahesh

  MaheshGx wrote:
  Hello

  I have a question that I am trying to run in two different environments.

  Test: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  Prod: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production

  Now the query runs fine in one environment and fails in the other environment.
  It gives following error.

  ORA-01861: literal does not match the format string
  01861 00000 - "literal does not format string.

  The query is too long and contains CHAR-DATE and DATE-CHAR conversions.

  The same query works very well on the TEST environment and the PROD environment.

  Any help related to it would be appreciated.

  Thank you
  Mahesh

  This is called a bug. One caused by the person who developed the code. They relied on an implicit conversion between strings and dates when
  production quality code will always use the function to_char and to_date with a format mask.

• The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  Hi all,

  IM new with OFA and Im working with Jdeveloper, I create a form to store information using a VO and EO and add information to the current line using the attribute set of function, I noticed that when I lunch the update in the jdevelopher data is OK in the comic book, but when I install the development in the DEV environment the data stored using java code does not the table, only data that are related by the object as text fields and others.

  This is the code that I use for SAP data, it works in jd, but not in the dev environment

  {} public void saveData (String responsabilidadID)
  int respId = Integer.parseInt (responsabilidadID);
  OAViewObject vo = (OAViewObject) getQuiebresComercialesVO1 ();

  vo.getCurrentRow () .setAttribute ("ResponsabilidadId", respId);

  getTransaction () .commit ();
  }

  Any there who encounter this type of problem, something I can check?

  Thank you all.

  Just check if you bounced the server after you deploy the code. Objects Java would not reflect the changes, unless the instance is bounced.

• deployed for QA (test) of the development environment

  Hi all
  
  I have a (name of the project main dw) project with several files, each folder represents a project (as mini - data warehouse and another transform file with different features of the DW).
  
  I'm having the problem unfolds to QA (testing) environment, which must be all the codes as well as developing.
  Could you please let me know how to export and import on the file and the associated objects (variable and KM).
  
  I tried with the folder only, but missed all the variables(over 20) and all the KM (about 10), now I need to export these 30 files.
  
  Is it possible to this individual to migrate through solutions, file
  
  any help would be greatly appreciated.
  
  Thank you

  have you tried a smart export/import?
  Solution does not work at the level of the folders, but if you drag the complete project to the solution, then, it will take all of the associated component (variable/file/km, etc.).

• How do we reuse the vmmark test environment?

  Dear Sir.

  We have built a VMMARK test environment and completed the test on my dock.

  If we want to run the test on another platform, should rebuild us a VMMARK test for the new platform environment?

  We had tried to leave the new platform to connect to iscsi of the old platform, but we have not found any virtual machine on the new platform.

  If so, should reinstall us all the tiles on the new platform?

  Could you give me some suggestions on this?

  Thank you!

  Hello

  If you have attached storage even as what was used previously, and storage is visible to the new ESX host, then you will need to just 'register' the VMmark VM on the new ESX host.

  One way to do this is through the Virtual Infrastructure client.

  1. connect to the new ESX host.

  2. click on the ESX host name (if necessary).

  3. click on the configuration tab.

  4. click on the storage option.

  5 you should now see the storage that you used previously.  Right click on the name of the storage and choose "browse the data store.

  6. search for the virtual machines that you want, within their individual records must be an individual named "vmx" file  Right click on it an choose "add to the inventory.

  That's all.  Remember to recreate your vSwitches as you had on the previous ESX host.

  Finally, if you use ESX (not ESXi) you can do this via the command by navigating to the same folders and running line "vmware-cmd - s register Handy if you want the script operation.»

• A NETWORK OK card for the test at home environment?

  I wanted to install ESX 4.0 on my computer at home, just for learning purposes. It's an Asus P6T with i7 920 and 12 GB of RAM. Unfortunately, Marvell onboard network card is not supported by ESX. If I want to buy a CHEAP NETWORK card that is officially supported so I can play with ESX. ESX installs with a single NETWORK card? I know that this is not recommended, but it is a test without vmotion environment, etc. Or ESX, physically, requires more than one network interface card install even?

  Intel Gigabit CT Desktop Adapter is very cheap and on ESX 4.0 HCL, but has a single port.  Oh, and I can't run ESX inside the workstation because I need to test the client 64-bit VMs, which you can't do inside Workstation 6.5.2.

  Thoughts?

  Yes like you don't tell a 'best practice', but you should be fine for a test environment.

  I would get another NETWORK card if you were doing well for storage at home if... but even you CAN do with a card NETWORK ISCSI or NFS

  Jered Rassier

  * Professional technical EqualLogic certified

  * Dell Enterprise foundations certified professional v.2

  ##If you found my post answered your question or helpful please mark it as such.

• I support a very large school district running Firefox 3.6. What will happen at the end of life date? In the online environment, we test this week.

  I run the test center for a very large school district with over 120 students of k. We have a current deployed at base of 54 client machines of k using Firefox 3.6. We have not upgraded for many reasons, of which the most important is to remove the possibility of use in navigation private students and dealing with plugin-updates for the digital non-born (read dumber than a bag of hammers users) that make up the majority of the customer base.

  We test ESR now, but only discovered this end of life for 3.6 is tomorrow, 4/24. We are currently in the middle of the scale of the State of online tests. The question is, what will happen tomorrow, when the browser will end of life. ESR wiki mentions that "an update to the current version of Firefox Desktop will be available through the Update Service Application"

  So the main question is, are my students/teachers goes to get a popup telling them that they have updated the browser if we have already turned off updates? If so, can I I disable remote using SCCM, because there will be all sorts of havoc.

  Please advise as soon as possible and thank you in advance.

  An addon like https://addons.mozilla.org/en-US/firefox/addon/disable-private-browsing-pl/ can help, or http://kb.mozillazine.org/User:Dickvl / Private_Browsing_disable (don't forget, this is beyond what this forum can help you with if you need help making these changes).