Moving Consumer and Producer to the test environment.

Similar Questions

• Copy of VM's to the test environment

  I'm working on a project to create a test environment with a copy of three servers that exist currently in production.  The production and the test environment both run ESX 4.0.  The production environment runs on blades with iSCSI storage, the test environment will be a stand-alone physical server with enough disk space and RAM to run the three VM.  The test environment will be moved to a laboratory test on a separate network cannot be routed.

  I have the new side of VMware and my questions do I need to copy all of the files belonging to the VM (vmdk, vmx, vmxf, vswp), that I need to copy the logs also?

  use VMware Converter to convert to virtual appliance, and then import the virtual appliance in the new environment by using the Client vSphere4.

• JMS adapter to consume and produce

  Hai guys,
  
  I don't know anything in soa. I had a usecase which must
  (1) read a .csv file
  2) send a bpel (in bpel do nothing to payload). Again, I have to send the payload to jms adapter (which i dnt know how)
  (3) of the same map of jms from the payload to the Ombudsman
  (4) send the entry to an another jms (jms2). jms2 to pass the payload in an another bpel
  5) bpel from the db adapter
  
  use
  
  Oracle jDevloper 11.1.13
  WebLogic server is a 10.3.6
  
  My problem is how to create the same jms in two ways such as consumption and production
  
  Thanks in advance
  
  Published by: Beckyard on September 26, 2012 21:49

  Hi Martin

  You can simplify your process, as has been said by neeraj.

  are actually using operation is available only in the side service and products are next to the reference. You can transfer messages from one queue to another using simple consume and produce the operation. I did a process of production/consumption, but it is only for information only from where to where we're heading data. And this created adapter appears only in the side of the reference.

  You can see an example of oracle site so that you can have a clear idea

  http://Java.NET/projects/oraclesoasuite11g/pages/JMSAdapters (syncrequestreply).

  Published by: $achin on July 17, 2012 01:53

• My boss asked me to creative cloud. I had to get all the Adobe programs. Before I installed the creative cloud, I installed the test version of Photoshop, Indesign and Illustrator. The test version ran outside and npw it says I have to buy

  My boss asked me to creative cloud. I had to get all the Adobe programs. Before I installed the creative cloud, I installed the test version of Photoshop, Indesign and Illustrator. The test version was missing and npw it says I have to buy the programs that we already have?

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Running discovery failed in the test environment.

  I have a layer of 5.7configured in two VCM plant newly installed in a test environment. Whenever I run the detection using AD, it fails when I try to specify the name of the computer that I want to add, it fails. I installed no agent of vcm on the test computer. I also tried race discovered by its IP address by specifying the IP address after the discovery, it lists all the servers in the subnet and it also says the State connection access is denied. Y at - it a doc detailed steps on how to correctly configure VCM first time in the environment.

  The VCM Admin Guide contains initial configuration step by step information, and all assistants, such as the Discovery Wizard, have fairly detailed context-sensitive help. The online help is the main documentation for the VCM.

  In case you, I think you two or three problems:

  1. you must add an administrative account network which will be eligible for the domain that you selected LDAP query and may directly contact the machines, if you selected this option. This is done under the authority of Administration\Settings\Network. Add the account to the accounts available, and attribute to him, by domain or group of computers all Machines.

  2 (and maybe 3): write file system access denied message that you receive when you try to manually add a computer because either you are using a user account that does not have NTFS permissions to write to the Program Files (x 86) of \VMware\VCM\WebConsole\L1033\Files\Discovery_Files directory, or you use an administrator account that has rights , but you are running Internet Explorer on the manifold itself and have not started it "as Administrator" way UAC is blocking your right to write the file.

  Not sure about the question of the UAC, but the rest of this figure in the Administrator's Guide.

  See you soon,.

  Paul

• Virtualize 2 DC to create the test environment

  Hi guys,.

  I wonder if someone could help me find a solution.

  I mainly want to improve our main DC - which holds Exchange 2000 (Yes, I know DC should not accommodate exchange roles, but this has been done before coming here)-between Windows 2000 and 2003, and then later this year, I'm going to buy a few new servers and migrate completely (and virtualize!) for 2008 and properly put in place the field.  So before you go ahead and perform the upgrade on our production servers, I thought that I would give to virtualize the domain controller using the VMWare converter. Everything seemed to happen, but when I pulled to the top of the virtual machine (in an environment test, completely isolated from true DC) and ran "adprep /forestprep" he said that he did not because he could not replicate to the schema master role is maintained on our other DC.  No problem, I thought, I'll just do a virtual schema master computer and connect them and everything will be fine.  Of course, then the replication failed between the two virtual machines, because the USN differed so I know now that it is not as simple as that.

  What I want to know is the following: is there anyway I can get my scenario of two DC in a virtual environment to test the updates on WITHOUT cold clone? I'm just saying that I want to do without cold cloning because our main DC took 13 hours to fully virtualize it.  I know I can get round to again the error USN downgrade our second DC and then perform the other steps to do, but I want it to be close as possible DC production simulation and production servers can replicate perfectly, so this step will apply when I do my real upgrade.

  Any thoughts on how / if I can achieve this?

  Thanks for any thoughts.

  Welcome to the forums!

  What a NTBackup of the State of the system and do a restore of authority on a virtual machine?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• maintain the test environment

  Hello
  
  I would liketo configuration from a test environment for DBA in my office.
  There will be no license cost for downloading of Oracle's OTN to install in my test environment.
  Let me put it like this... So I mean to test the installation of Oracle 11 g (imagine I do not have a license for g 11)... Do I have to purchase a license for this...
  When I want to test... I just want to test the Installation...
  If I want to try to tell another one... as a 2 node rac on vmware server... do I license for this... I know that it doesn't require the license if its for my personal system... However if its in my office we need a license?
  
  Please provide me with your valuable contributions...
  
  Concerning
  Renjith Malet

  Asif Kabir,
  Pay close attention to these statements. I wouldn't make such a statement on a forum.

  Renjith,
  You should check with the Oracle Sales person dealing with your organization.
  You can see some guidelines of
  1. the software investment Guide and price to http://www.oracle.com/us/corporate/pricing/index.html list
  2. the developer license in the download page on http://www.oracle.com/technetwork/indexes/downloads/index.html#database
  See http://www.oracle.com/technetwork/indexes/downloads/index.html and
  http://www.Oracle.com/technetwork/TestContent/standard-license-088383.html (it's the current version - it may change, always check the latest version online).

  However, you should also consult your Oracle Sales person. Licenses and quantities are negotiated.

  Hemant K Collette

  Published by: Hemant K Collette on January 24, 2011 14:46

• 1025nw Jam in Drum area - attention LED still flashes and cannot print the test page

  My Laserjet PRO CP1025nw is only 3 weeks. Everything was normal until I met a paper jam today. I removed the damaged document by opening the back cover and the piece of paper remaining from the feeder. But still, printer flashes driving caution.

  I turned the printer off and then back on and tried the instructions in the user manual to clear paper jams. When I turn on the printer, all lights are turning ON one (as the normal boot sequence) and then warning led flashes. I couldn't hear any engine wheelchair or his mechanics during this process. Web server page printer (with wifi) showed the status of the printer as "jam in the drum area.  I removed and re-inserted Imaging drum by following the instructions to replace the imaging drum.

  What I see after turning on th eprinter is just attention light flashing and I can't even print a test page. I don't hear any rotation of the engine sound of the printer. Pleas help me out of this problem.

  I solved the problem myself. Although I couldn't find any piece of paper left by normal inspection of the outside of the printer, I removed the Assembly / separation and roll pick-up from the input tray to find a small piece of paper remaining on the paper sensor flag. Very hard or literally impossible to find something in this place by the normal health check.

  To eliminate the epickup roll pre-assembled under th eprinter th, I removed the right side panel and the left side panel for th eprinter. I was happy to see the piece of paper that has ruined my day quiete. Deleted and everything set up as before and successfully took a test page print.

  Thank you for repair of HP, which led me to get inside the printer.

• Reports after 8 hours of testing in a room of the test environment

  I'm thinking on how best to account for my results.

  Test configuration:

  Oven with a profile running for 10 hours. temperature increses and decreases during that time. I have 4 DUT in the oven and I communicate them. I'm just the communications test so if theres always communication we are GOOD.

  I have a model of batch processing. Am I on each Board, that I have to talk to and validate communications during times of 4 minutes. then I move with other USE. This cycle continues and continues for 10 hours.

  I have a loop like this

  While - oven still running is true

  synch batch

  My test (VI... Success, failure)

  synch batch

  end

  So I don't want to have 10 hours of data.

  in a case of I failed I would like to save the event. and at the end I would like to have a result. OVERALL TEST PASS.

  I wonder what is the best way to do it.

  I thought it is put and statement after my test... that if an error occurs to record the failure. If this is not the case, do not save anything. I think I might be able to change the property fron the declaration of the section or something like that.

  y at - it another smart thing to do. ?

  Thank you.

  Hey buton.

  The first three suggestions in this white paper will be probably useful to you in your application. Basically, you could use on-the-fly writing your report directly on disk instead of keep it in memory and use the "single view last results ' and 'Eliminate the results not held by the model' to reduce the growth of the report in memory.

  See results failed to complete your own needs, you can configure the report to display only failures by changing the expression of filtering the results in the report options dialog. The option "exclude Passed/fact/ignored" will have the desired effect. The finished report will always show the State overall USE in the header of the report, you will be able to see if the test of success or failure.

  I hope it helps to and let us know if you have other questions about this!

• Help: Configure the simple test sequence, operator selects particular test connects to the part of the teststand sequence file and then performs the test

  Hello

  I am very new to TestStand, please see the question below and give advice.

  I want to set up a simple test sequence.

  I want a message to popup on the screen that asks the operator what unit of 6 units (maximum 10) to test (i.e. There is say box of 6 to 10 s to select from).

  Then the sequence goes to the specific part of the sequence and performs the test on a unit that either has been selected.

  What is the best way to do it?

  I use pop-up message windows to do this? and if so what should I connect to the correct part of the sequence file?

  Pop-up message windows allow only 6 options to select from?

  Thank you

  Hello

  You can do this by using the method of message popup. You can ask the user what unit want to run message by inserting in the expression of the message in the message popup step parameters. Something like below

  "Enter the number of execution unit.

  1 Unit1

  2 unit 2

  .......

  10 Unit 10 "

  then check the 'Enable response text box"tab is different from the stage. When the user enters the unit number you can get the value entered by the user by inserting the below statement post expression of message popup step parameters

  Locals.String = Step.Result.Response

  Note: The string is a local variable to be set.

  Convert string to number and send that output to pass the expression you can use a sequence of call step to call the sequence according to which must be performed. (I hope your each unit will file separate sequence)

  I hope that this solves your problem. If you do not understand please let me know so that I can put a small example and send it to.

  See you soon,.

  Krishna

• GemFire fails in the test environment

  Our company is now two separate networks internally for the company's operations; a network is for testing and one for production. The production network has access to the public internet is not the case of the network tests. We have grids to Gemfire identical set up on both of those networks for test and production, respectively. The grids to Gemfire are images of mirror on the other regarding the names of hosts, the configuration and locators until we could copy the deployed .war (that we welcome each node Gemfire in a Web inside Tomcat application) from the test network to the production with zero configuration change network.

  Recently, we observed a strange behavior on the test network: Gemfire intermittent will become partially insensitive and will require a reboot to start to work properly. In particular, one of our CacheListeners stop shooting.  We have not seen this at all in the production network in the months we had the Gemfire living application in production, however, which happens quite frequently in the test network.

  I know this is a very vague description of the problem, but I was not able to isolate any more than this yet. It is very difficult to reproduce. Y at - it a possibility that something like that might be related to public access to the internet is limited on the test network? Gemfire requires a public internet connection for its licenses? This is the only difference between the two installations is naturally what we thought to look at first. Any other ideas?

  Tom

  Thanks for your reply. I was able to determine that there is a thread deadlock in the CacheListener that was only apparent in certain uses of test of the grid. I was able to fix the bug, and we have not seen the problem since.

• Bought CC plan photographer, CC LR just downloaded and installed and it says the test expired?

  I bought CC Plan a few days ago, installed LR CC & CC PS today and when I started it it said that trial expired then gave me the possibility of entry series.

  There are no products appearing on the tab my Plans and my account either. Frustrating!

  Yes, I tried signing in & out (several times!)

  Clues?

  Entered in CAT

  They took on comp and found that the problem was with the host file

  Remove erroneous entries and now everything works fine

• Need space for the test environment for windows server 2003 and sharepoint 2010 online

  Hello

  We are currently running in the locked-down environment and looking for an online service that would allow us to put in place about 4 servers Hyper-V or VM (2003) and implementation of SharePoint 2010 and SQL Server 2008 on them... Where EV may seek to purchase/rent the space for it?

  Thank you very much for your time and your answers!

  Hi Volodymyr G.

  I suggest you to search rental / purchase of space on the server.

• iSupplier external installation on the Test environment.

  Currently, we use iSupplier and have a DMZ server that we use for our Production environment. We have a need to be able to log on as a supplier when we are on our test boxes without using a server "test DMZ." I changed the POS: external to point to the same URL address internal our address but when I connect as a provider, I get the following error:
  

  The webpage cannot be found
   
   HTTP 404 
  
  Most likely causes:
  •There might be a typing error in the address.
  •If you clicked on a link, it may be out of date.

  The URL on the page fault reads as follows: http://testap1.garlandisd.net:8000/OA_HTML/fndvald.jsp
  
  Is there a way to make the connection work on our internal website for our test environments?
  
  Thank you
  Rob

  What version of apps? and meanwhile, please go through the MOS score.
  What values should be specified for iSupplier profiles POS: POS and external Url: Url internal [266376.1 ID]
  Allow access by outside provider to the user iSupplier Oracle Portal and Oracle Sourcing [308271.1 ID]
  Kind regards

• moving documents and settings from the old hard drive to a hard drive nine folder

  I have a new computer. I installed a hard drive from my old computer to the new, which is not the one that starts more. But. There still my documents and settings directory. Because windows is so smart and "documents and settings is not a folder more", it won't let me access my old Vista documents and settings folder that is bloody well a real folder. I am so bored on this subject. Any ideas what to do?

  No need to get angry - just don't take possession of your records:

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/