Running discovery failed in the test environment.

Similar Questions

• GemFire fails in the test environment

  Our company is now two separate networks internally for the company's operations; a network is for testing and one for production. The production network has access to the public internet is not the case of the network tests. We have grids to Gemfire identical set up on both of those networks for test and production, respectively. The grids to Gemfire are images of mirror on the other regarding the names of hosts, the configuration and locators until we could copy the deployed .war (that we welcome each node Gemfire in a Web inside Tomcat application) from the test network to the production with zero configuration change network.

  Recently, we observed a strange behavior on the test network: Gemfire intermittent will become partially insensitive and will require a reboot to start to work properly. In particular, one of our CacheListeners stop shooting.  We have not seen this at all in the production network in the months we had the Gemfire living application in production, however, which happens quite frequently in the test network.

  I know this is a very vague description of the problem, but I was not able to isolate any more than this yet. It is very difficult to reproduce. Y at - it a possibility that something like that might be related to public access to the internet is limited on the test network? Gemfire requires a public internet connection for its licenses? This is the only difference between the two installations is naturally what we thought to look at first. Any other ideas?

  Tom

  Thanks for your reply. I was able to determine that there is a thread deadlock in the CacheListener that was only apparent in certain uses of test of the grid. I was able to fix the bug, and we have not seen the problem since.

• Copy of VM's to the test environment

  I'm working on a project to create a test environment with a copy of three servers that exist currently in production.  The production and the test environment both run ESX 4.0.  The production environment runs on blades with iSCSI storage, the test environment will be a stand-alone physical server with enough disk space and RAM to run the three VM.  The test environment will be moved to a laboratory test on a separate network cannot be routed.

  I have the new side of VMware and my questions do I need to copy all of the files belonging to the VM (vmdk, vmx, vmxf, vswp), that I need to copy the logs also?

  use VMware Converter to convert to virtual appliance, and then import the virtual appliance in the new environment by using the Client vSphere4.

• Moving Consumer and Producer to the test environment.

  Hello
  
  Move when the consumer and the producer WLP 9.2.1 applications from DEV environment for the test environment what are the steps that we must do in order to get all the Federated pages/books/portlets of consumption of the test environment? We using the same hostname in dev and test environment, simply by changing the ip address of the host in the backend.
  
  Is that all we have to takecare specifically when we spread?
  
  Thanks in advance
  Rajesh

  Hello Renon,

  For option 2, I believe that the steps would be:

  1. Consuming portlets from the producer of staging environment
  
  
  2. Set preferences in the portlet Federated on the consumer and the test, keep track of what preferences have been on portlets for step 5.
     
  
  
  3. Propagate from the intermediate producer to the producer if necessary production - as long as the same ears and wars are deployed on the production and staging of producers, spread may not be necessary if it is used only as a producer.
  
  
  4. Spread all the portlets intermediate consumer to the producer of the production. The propagation tool will spread Federated portlets, but when it installs them to the producer of the production, the spread of WLP 9.2 tool is to assume that it points to same instance of producer than intermediate consumers. Since this is not the case for your installation, all of the custom federated portlets will be broken on the consumer of the production. If you have configured the consumer of production with the same producer handle that you used in the staging environment, Federated portlets that have never custom should work after propagation.
     
  
  
  5. By using the administration tools, remove these custom federated portlets broken consumer of production and re-create them, adding the preferences of step 2 and add them in the appropriate pages.
     
  
  

  Unfortunately, this is not a single task. Whenever you do not want to propagate staging to production, all custom federated portlet must be re-created on the production environment with appropriate preferences. This includes the portlets that you had changed a preference on and portlets that you had not changed the values preferably on since the last time that multiply you, because the propagation tool will overwrite these instances of portlet on the consumer of production with invalid portlet CCP handles.

  WLP 10.0 and later, the steps are much easier - you would just run the tool in spreading on the producers, while consumers and any customizations would be automatically transferred from the staging to the production.

  Kevin

• Reports after 8 hours of testing in a room of the test environment

  I'm thinking on how best to account for my results.

  Test configuration:

  Oven with a profile running for 10 hours. temperature increses and decreases during that time. I have 4 DUT in the oven and I communicate them. I'm just the communications test so if theres always communication we are GOOD.

  I have a model of batch processing. Am I on each Board, that I have to talk to and validate communications during times of 4 minutes. then I move with other USE. This cycle continues and continues for 10 hours.

  I have a loop like this

  While - oven still running is true

  synch batch

  My test (VI... Success, failure)

  synch batch

  end

  So I don't want to have 10 hours of data.

  in a case of I failed I would like to save the event. and at the end I would like to have a result. OVERALL TEST PASS.

  I wonder what is the best way to do it.

  I thought it is put and statement after my test... that if an error occurs to record the failure. If this is not the case, do not save anything. I think I might be able to change the property fron the declaration of the section or something like that.

  y at - it another smart thing to do. ?

  Thank you.

  Hey buton.

  The first three suggestions in this white paper will be probably useful to you in your application. Basically, you could use on-the-fly writing your report directly on disk instead of keep it in memory and use the "single view last results ' and 'Eliminate the results not held by the model' to reduce the growth of the report in memory.

  See results failed to complete your own needs, you can configure the report to display only failures by changing the expression of filtering the results in the report options dialog. The option "exclude Passed/fact/ignored" will have the desired effect. The finished report will always show the State overall USE in the header of the report, you will be able to see if the test of success or failure.

  I hope it helps to and let us know if you have other questions about this!

• WebService call failed during the test adapter for oracle applications

  In SOA 11 g, when I test my application that uses Oracle Applications card it gives an error "Webservice invocation failed. The error stack is
  
  oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occurred when the link was invoked.
  Exception occurred during invocation of the JCA binding: "binding JCA execute of operation 'getDailyRatesAdpSelect' failed due to the reference: connection problem component binding JCA.".
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  + OutboundR12:getDailyRatesAdp [getDailyRatesAdp_ptt::getDailyRatesAdpSelect (getDailyRatesAdpSelect_inputParameters, GlDailyRatesInterfaceCollection)]: the JCA Binding component was unable to establish an outgoing connection of JCA CCI due to the following problem: BINDING. JCA-12510 +.
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file
  
  The Binding of JCA component is unable to the adapter resources specified in the startup item: location = "jdbc/EI/R12.
  The reason is most likely to be
  
  + 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or +.
  
  + 2) the "element in weblogic - ra.xml has not been defined in eis/jdbc/R12. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). +
  
  Please fix this and then restart the application server
  
  The same as xADataSourceName the value of the Data Source JNDI name, but still get this error.
  Specify the location of the ra.xml file - weblogic and steps to guide to solve this problem.
  
  Thank you
  Sadia

  Looks like the Oracle Application adapter is not running.
  Connect to the weblogic administration console on your left window, click on * "Deployments" *, and then click your right window, under summary of deployments, check the status of * "OracleAppsAdapter."
  It should be in Pavilion OK, so that it can reproduce and accepting applications.

  Thank you
  Vijay

• Virtualize 2 DC to create the test environment

  Hi guys,.

  I wonder if someone could help me find a solution.

  I mainly want to improve our main DC - which holds Exchange 2000 (Yes, I know DC should not accommodate exchange roles, but this has been done before coming here)-between Windows 2000 and 2003, and then later this year, I'm going to buy a few new servers and migrate completely (and virtualize!) for 2008 and properly put in place the field.  So before you go ahead and perform the upgrade on our production servers, I thought that I would give to virtualize the domain controller using the VMWare converter. Everything seemed to happen, but when I pulled to the top of the virtual machine (in an environment test, completely isolated from true DC) and ran "adprep /forestprep" he said that he did not because he could not replicate to the schema master role is maintained on our other DC.  No problem, I thought, I'll just do a virtual schema master computer and connect them and everything will be fine.  Of course, then the replication failed between the two virtual machines, because the USN differed so I know now that it is not as simple as that.

  What I want to know is the following: is there anyway I can get my scenario of two DC in a virtual environment to test the updates on WITHOUT cold clone? I'm just saying that I want to do without cold cloning because our main DC took 13 hours to fully virtualize it.  I know I can get round to again the error USN downgrade our second DC and then perform the other steps to do, but I want it to be close as possible DC production simulation and production servers can replicate perfectly, so this step will apply when I do my real upgrade.

  Any thoughts on how / if I can achieve this?

  Thanks for any thoughts.

  Welcome to the forums!

  What a NTBackup of the State of the system and do a restore of authority on a virtual machine?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• maintain the test environment

  Hello
  
  I would liketo configuration from a test environment for DBA in my office.
  There will be no license cost for downloading of Oracle's OTN to install in my test environment.
  Let me put it like this... So I mean to test the installation of Oracle 11 g (imagine I do not have a license for g 11)... Do I have to purchase a license for this...
  When I want to test... I just want to test the Installation...
  If I want to try to tell another one... as a 2 node rac on vmware server... do I license for this... I know that it doesn't require the license if its for my personal system... However if its in my office we need a license?
  
  Please provide me with your valuable contributions...
  
  Concerning
  Renjith Malet

  Asif Kabir,
  Pay close attention to these statements. I wouldn't make such a statement on a forum.

  Renjith,
  You should check with the Oracle Sales person dealing with your organization.
  You can see some guidelines of
  1. the software investment Guide and price to http://www.oracle.com/us/corporate/pricing/index.html list
  2. the developer license in the download page on http://www.oracle.com/technetwork/indexes/downloads/index.html#database
  See http://www.oracle.com/technetwork/indexes/downloads/index.html and
  http://www.Oracle.com/technetwork/TestContent/standard-license-088383.html (it's the current version - it may change, always check the latest version online).

  However, you should also consult your Oracle Sales person. Licenses and quantities are negotiated.

  Hemant K Collette

  Published by: Hemant K Collette on January 24, 2011 14:46

• Run SQL failed with the authentication failure

  Hi all, I have access to a large grid control to manage my small group of data, I'm not super user, I am only a dba user access to databases in mi cluster. Then, when I try to run SQL using "execute SQL" link I get a message that says "LOG: Local Authentication failed...". PAM attempt authentication... "WFP has failed with the error: authentication failure.
  
  But, when I use the 'SQL Worksheet' link to run the same SQL that works very well, is not possible to run SQL using the other link? What's wrong? Thanks in advance.

  You have not set up the setting with agent PAM, please follow the notes 422073.1 and check.

• Warning to start the hard disk crash is imminent. Failing all the tests start.

  I tried all the start tests and they fail. Have had this message for two weeks now and not real same problems if the startup is very slow.

  The hard drive is faulty and should be replaced soon. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  BTW-save all important files, photos etc to external source soon! USB DVD drive.

  If you need help with selection and replace of the disk station hard back with model number & full product as indicated on the Service tag on the bottom of the laptop.

  How can I find my model number or product number

• Need space for the test environment for windows server 2003 and sharepoint 2010 online

  Hello

  We are currently running in the locked-down environment and looking for an online service that would allow us to put in place about 4 servers Hyper-V or VM (2003) and implementation of SharePoint 2010 and SQL Server 2008 on them... Where EV may seek to purchase/rent the space for it?

  Thank you very much for your time and your answers!

  Hi Volodymyr G.

  I suggest you to search rental / purchase of space on the server.

• iSupplier external installation on the Test environment.

  Currently, we use iSupplier and have a DMZ server that we use for our Production environment. We have a need to be able to log on as a supplier when we are on our test boxes without using a server "test DMZ." I changed the POS: external to point to the same URL address internal our address but when I connect as a provider, I get the following error:
  

  The webpage cannot be found
   
   HTTP 404 
  
  Most likely causes:
  •There might be a typing error in the address.
  •If you clicked on a link, it may be out of date.

  The URL on the page fault reads as follows: http://testap1.garlandisd.net:8000/OA_HTML/fndvald.jsp
  
  Is there a way to make the connection work on our internal website for our test environments?
  
  Thank you
  Rob

  What version of apps? and meanwhile, please go through the MOS score.
  What values should be specified for iSupplier profiles POS: POS and external Url: Url internal [266376.1 ID]
  Allow access by outside provider to the user iSupplier Oracle Portal and Oracle Sourcing [308271.1 ID]
  Kind regards

• run immediately fails with the error

  The following code generates the error and I can not understand what the problem is:

  SET SERVEROUTPUT ON;

  declare

  Val number (21);

  s_sql varchar2 (2000);

  Start

  s_sql: = q '{select last_number in the Vale of all_sequences where sequence_owner = 'SST' and sequence_name = "ADDRESS_SEQ"}';

  Dbms_output.put_line ('sql 1 ' | s_sql);

  run immediately s_sql;

  end;

  
  

  Error report:

  ORA-00905: lack of keyword

  ORA-06512: at line 7

  00905 00000 - 'lack the key word'

  * Cause:

  * Action:

  select last_number SQL 1 in val all_sequences where sequence_owner = 'SST' and sequence_name = "ADDRESS_SEQ."

  The error is strange since

  Select last_number in the all_sequences where sequence_owner = 'SST' and sequence_name = "ADDRESS_SEQ."

  is a valid instruction

  Although I see no need for SQL dynamic in this case, in general, you must provide the vatiable to receive the value of the select statement outside the immediate execution.  More like:

  s_sql: = q '{select last_number in the all_sequences where sequence_owner = 'SST' and sequence_name = "ADDRESS_SEQ"}';

  execute immediate s_sql in val

  John

• OSB: Cannot run message in the test console

  Hi all
  
  I have a problem with a test console.
  I can't run document application in the test console.
  The error is ' an unexpected error to access transport for service information: null ".
  
  Any suggestion would be appreciated.
  
  Thank you
  
  Published by: tamjeekong on June 25, 2012 21:44

  Hello

  Be sure to mark the answers accordingly... Useful or appropriate, following the rules of the forum
  https://forums.Oracle.com/forums/Ann.jspa?annID=893

  Cannot run document application in the test console

  Please give us more information about your problem. What is a Proxy Service? A Business Service? What kind of transport do you use?

  See you soon,.
  Vlad

• Query works well in an environment, but not in the other environment

  Hello
  
  I have a question that I am trying to run in two different environments.
  
  Test: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  Prod: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  
  Now the query runs fine in one environment and fails in the other environment.
  It gives following error.
  
  
  ORA-01861: literal does not match the format string
  01861 00000 - "literal does not format string.
  
  The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
  
  The same query works very well on the TEST environment and the PROD environment.
  
  Any help related to it would be appreciated.
  
  Thank you
  Mahesh

  MaheshGx wrote:
  Hello

  I have a question that I am trying to run in two different environments.

  Test: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  Prod: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production

  Now the query runs fine in one environment and fails in the other environment.
  It gives following error.

  ORA-01861: literal does not match the format string
  01861 00000 - "literal does not format string.

  The query is too long and contains CHAR-DATE and DATE-CHAR conversions.

  The same query works very well on the TEST environment and the PROD environment.

  Any help related to it would be appreciated.

  Thank you
  Mahesh

  This is called a bug. One caused by the person who developed the code. They relied on an implicit conversion between strings and dates when
  production quality code will always use the function to_char and to_date with a format mask.