Similar Questions

• Maintenance mode

  I get this error message when you try to put an ESXi 4.1 in maintenance mode

  Host ESXServer can't be entered in maintenance mode:
  SOAP fault:
  -----------
  Error string: error. RestrictedVersion.summary
  Lack of details: RestrictedVersionFault

  Thanks for your review.

  You use the vCLI or PowerCLI?  In general, you see this message with free ESXi license edition.  This edition is limited to read-only with vCLI/PowerCLI operations, so you should put the host in maintenance with the vSphere client mode.

• Switch the SFDC ID campaign to dynamically query string?

  Hello

  I have a few campaigns created and I want to spend the SFDC ID campaign in a landing page query string URL in an attached email.

  I want to pass campaign SFDC ID dynamically, as if I chose send email step and added an email campaign. I sfdc campaign id and for each campaign, I don't want to hard-code the value. Just like field merges I want to fill the value in the URL.

  Is it possible anyway.

  Thank you

  Dardare

  Dardare, try adding this string as a query string parameter in your emails.

  This box works if the Eloqua campaign has the ID of CRM campaign settled in campaign settings. See also: complete list of Default merge fields?

  Kind regards

  James

• DELL Dimension XPS T800r CMOS Maintenance Mode worries...

  Greetings, good people of the world of DELL!

  I'm working on a desktop DELL Dimension XPS T800r for a neighbor.

  The original complaint: no video

  Some things have changed since yesterday when I worked on it, then read on...

  Here's what I've done so far in order:

  (855) 935-7526 *. Exchanged video from a well-known donor cards.  No change.

  2. the DIAGNOSTIC LEDS on the back panel has found.

  3 DIAGNOSTIC LIGHTS remain DARK during the start attempt.

  4. consultation documentation DELL for LIGHT codes DIAGNOSTIC.

  5. the code is: All the DARK - turns on by default.

  6. again consulted the DELL documentation to identify what to do:

  (a) reinstall microprocessor

  (b) remove all the expansion cards

  7. After you do both.  No change.

  8 using the prior computer knowledge, I pulled ALL of the motherboard except the feeding fittings and connections on the front panel.  I unplugged all connectors power hard drive as well.  I left only the CPU fan connected to the motherboard.  I checked the power supply against DELL standards and all is good.

  9. now, knowing the CMOS batteries, I checked the voltage on board.  He was 3.1VDC.  Seems good.  I didn't want to remove it, so in order to make sure it's properly plugged in, I turned the battery making to create a better connection.  That's where things have changed since yesterday...

  10 leave the BARE Board, I plugged it in to the power supply.  Silence.  Only the yellow led on the motherboard lit up.

  11. I installed the CPU and VIOLA!, LIGHTS flash YELLOW for a second DIAGNOSIS, and both fans turn quickly upward, then will stop altogether.  The yellow led on the motherboard remains on.

  12 DELL documentation contains this code to represent: card system is powered,
  but the BIOS is not executed.

  13. I think turn battery CMOS created a better connection (the computer IS almost 16 years old) giving me a response to market now.

  14. I tried to reinstall everything and document what happens after turning the power on.  Nothing changes beyond this point.  LIGHTS DIAGNOSTIC flash YELLOW briefly, and the power supply and fan rotation CPU for a second, then stop.

  15 DELL documentation suggests putting the system in MAINTENANCE MODE by the CMOS jumper

  This computer is almost 16 years old, and very probably, the owner has not saved the BIOS settings.

  This is what is installed, before the Panel:

  A CD-ROM drive

  An IOMEGA Zip drive

  A floppy drive

  Now to the question:

  Since I have no way to backup or recover the CMOS settings, I hesitate to put the jumper to MAINTENANCE MODE to see if the computer will boot all the way to the top.  I'm not potentially make the computer unusable in maintenance or replacing the battery mode, even though I would replace the battery because of the line due to age.

  The DELL documentation:

  NOTICE: Pass by the maintenance mode returns all settings in the
  Installer system to their default values. Dell highly recommends
  that you save or print the current settings before entering in this
  mode, so you can fix them when the system is reset to normal
  mode.

  What do you think will happen if I reset the default BIOS by moving the jumper and replacing the battery?

  I will cause a catastrophic failure?

  Now, the other side of the coin is that the system is relatively basic, so I have to enter the starting sequences and other isn't a big deal.  I hope...

  At worst, I'll have to use a drive caddy to retrieve its data from the hard drive.

  Thanks in advance for all your help and support!

  Austin Cajiao

  In case it helps someone, re-seats maps microprocessor and expansion got the computer fully functional again.  I guess that for a computer in 16 years, the tabs or oxidize some and created resistance which forbade the computer recognition and power.  It works fine now.

  -Austin Cajiao

• Eloqua reporting: what is the difference between 'Link clicks' and 'interactive generated query string value "?

  

  Sometimes, I need to look at the link clicks in order to determine what link they clicked and sometimes the value of query string. What is the difference?

  Redirect link is the actual URL that redirects to a specific Web site location.

  Value of query string of clicks is what follows after the "?" in the link. These query strings do not change the location where the user is directed to but is for information purposes.

  If you were to combine interactive generated link and the value of clicks query string, you will get the full link following the user.

  Example: In your screenshot, for the first row in the report, the user would have followed this link:

  https://play.Google.com/store/apps/details?ID=no.osloby.app

  The report broke it into 2 parts: clicks link (https://play.google.com/store/apps/details) and the value of query string of clicks (? id = no.osloby.app).

  You can create custom query strings under configuration > site: query strings. This can be useful if you want to create your own way to mark up and view metrics on clicks for links. When you define a query string parameter, you can add this setting with different values at the end of the links to follow only those (ex: "?") QueryStringParam = value1'). I used this is to differentiate between separate instances of identical links in the same email (ex: a link is a banner image and text) to see who is the most useful and results in the most traffic. You can then view a breakdown of clicks by each query string under Insight > reports and dashboards > site > overview of Query String parameters.

  

  Hope this helps... Let me know if you have any other questions.

• How do follow you steps contained and commitment to move prospects into your funnel? Query strings?

  We are working on making our culture, funnel and lead scoring capabilities to the next level with the launch of a new Web site and I'm looking for comments on how the other Eloquans are tracking content in their or websites, emails, etc..  In particular, those of you who use an external (non-Eloqua) DAM, Adobe CQ5, SFDC, YouTube files, Limelight or other active storage media.  I am confident in the brilliance and creativity of the community of Topliners to get at least 2-3 different options that work as there are a lot ways to skin the proverbial cat.

  Here are some things that we will deliberate or who already use to some extent:

  1 string parameters of query on each link for an asset

  2 sets of query string parameters?

  3. query string clusters?

  4 page marking (manual, automatic-rules?)

  5. any other ideas?

  What is your strategy of big picture to add assets, maintenance and training to keep this accurate and functional?

  Thanks in advance!

  -jeff

  jrummertime

  1. we use Eloqua to store assets. WE find easier since we can then use just the traceable link, wherever we promote this content.

  2. Add the appropriate printing group. Sorry for the confusion

  I think that the stated scenario might work for you. At the end of the day, you do a lot of marking at the front (which is really not that hard - just a bunch of click).  As you add content, you simply label it and rating program is already set up to the partition and workflow on this tag. So the only thing you do is adding the new content to the appropriate marking group.

• Dissect of Eloqua own AdWords Landing Page and URL with query string parameters, please!

  I presume that for AdWords landing pages are one of the most common types in use. I'm at a new company and try to create an approach that uses the latest methods. HAFS is gradually, and a large part of the information contained in the Topliners is old (2011) as these popular posts

  What is the best way to track Google adwords through Sales Force?
  How to capture Sources referring to forms and Landing Pages using query strings

  and the references using javascript to analyze the parameters in the screens that is 2009 and is not exactly what Eloqua uses today.

  I started to look at what Eloqua uses in its own marketing efforts and saw the potentially useful parts and parts that are confusing. I thought it would be useful if someone could dissect the code of the landing page and explain how each part of the code is. I'm OK with short descriptions and references to other articles or messages to explain the different parts that have not changed.

  Here's a page url to use. I added 'x' before each additional parameter then click top ruin the campaign stats.

  http://demand.Eloqua.com/LP=3461?elqoffer=xGartnerMQ & GoogleCampaign = xEloqua & SLS = xPPC_Google_Eloqua_2012 & gclid = xCKGFzcHyh7YCFQThQgod7lMAyg

  Here are some specific questions that I hope can be answered:

  • What you rely on Google to deliver you in their reports vs. what you capture discrete parameters: elqoffer, GoogleCampaign and sls
  • You use the gclid itself? How?
  • Is there a new better method for parsing of URLS and using hidden fields settings?
  • How do you use Eloqua cookies at the same time to send the form of Adwords?
  • You dynamically change the landing page?

  Thank you!

  Hi Mike,.

  I'm on the Ops of Eloqua Marketing team and can shed light on some of your questions.  I hope this helps!

  • What you rely on Google to deliver you in their reports vs. what you capture discrete parameters: elqoffer, GoogleCampaign and sls
  • elqoffer - we use elqoffer to indicate that the offer is valid for adword.  The value we deliver is used for many things.  Of course, we use it for reporting purposes, but we also set up our steps to use this value in a hidden field to redirect to the appropriate page supply once the form and also send the appropriate autoresponder of form processing.  We set up a dropdown list (aka select list) cards offer URL values (for the page of the offer) and another list of choices cards offer values to email ID (for the answering machine).
  • elqchannel - we also usually include a query string for the elqchannel who tells us the General source of the Contact (e.g. Google, Bing, etc.).
  • SLS - is essentially the Source of lead (sls = source of specific lead).  We use it to fill a hidden fields that reach "lead Source - Original" and 'Lead Source - the most recent'.  For us, the source of the specific lead is a very granular (and non-General, such as 'research') but includes a lot of information based on a strict naming convention.
  • That's what we use Eloqua to adwords, but we also use an SEO company to help us optimize our search spend.  To do this, they provide their own tracking code we put on the landing page initial as well as the page of the offer (ie. confirmation page).  To get the code on our LP, we use the cloud "Static content" component that allows you to place any custom code you want in the body of the HTML code.  Unfortunately, I don't have details on what exactly is captured with this code, or how it is used.
• You use the gclid itself? How?
  • I don't know the answer to this one.  It's someone else on our team that works closely with an SEO company, so I think they know.
• Is there a new better method for parsing of URLS and using hidden fields settings?
  • YES!  You may have noticed, we have some Javascript on our landing page that does a few things.  First of all, he did a Web data search in Eloqua to see if you are a known visitor and if so, we can pre-fill the form with information we already know the visitor.  The other thing is the JS is populate our hidden fields with the values of query string.  We started to do this before I had a cloud component that eliminates the need for JS custom.  You can use Form Population App to do all that for you.
• How do you use Eloqua cookies at the same time to send the form of Adwords?
  • I'm not 100% sure I know what you're asking here, but my answer to the previous question can also respond to this one.  Data search Web first checks the Eloqua cookie to retrieve your email address, and then it uses this email address to search for your Contact field values and pre-fill the form.
• You dynamically change the landing page?
  • We're not changing dynamically the landing page.  Usually, a visitor to click through to an Eloqua email or visit a page PURL.  Dynamically present the offer page based on the value of the query string for "elqoffer."  Looking for an application Cloud released in the coming days that will allow you to place the dynamic content on this initial landing page based on your cookie.

The way we structure our campaigns is based on the balance between reporting requirements while maintaining their operational efficiency.  For example, we do want to create a new campaign for each offer that we have.  That would quickly overwhelm our team.  For 2013, we have created 3 campaigns:

1 research

2. 3rd party Emails

3 display ads

Each of these campaigns have only 1 formula on it (one for research, one for email and display ads).  Each offer has its own landing page (see screenshot below).  The campaign of the report combined with the data of the form layout give us the requirements we need to understand what is working and what is not.

TIP: If you have custom data objects, you can also consider creating one that seizes all shipments form for each of your forms in 1 place.  This way, you need only 1 set of data instead of individual export for each form of export.

Example of a search campaign:



• Normalize the input of query string to something intelligible

  I had a request for assistance since Friday on this, but since it is not answered yet, let's try your collective wisdom of the TopLiners to determine if I even do it properly!

  I have the URL with an assetid in the query string, which is a number. As well as this engage.companyname.com/landingpage?assetid=1

  Each number corresponds to a document in our download library. It is all together to dish up the correct asset and write an object (many - to a single contact) data indicating that the download happened. He writes assetid (number) on the data card.

  I wanted to be able to have something intelligible on the map data for a number of reasons. So I created an updated rule set where for each assetid, an asset name is written in the name field of the property (on the data object).

  I implemented a simple program in builder program to assess the totality of data objects and run this update rule set. But it does not work.

  So somewhere along the way I've done something wrong or missed a step (I have this puzzled through with TopLiners and EU documentation) or I am barking the wrong tree.

  I'll probably need to wait for support to come thanks to deconstruct what happened - but how I YOU think you?

  BTW, this program will do much more for data eventually cards but let's start first

  Here is the first part of the record, I have received support. I knew that the documentation followed before missing a bond - but only you know what you know, right?

  Thank you to contact Oracle Eloqua customer service, thank you for your business. I see you are trying to update the contacts with details of the documents that they have accessed (code of asset and asset name of the document) using of data maps and update rules. To start to help you, I want to confirm the problem you are experiencing. The specific part of the configuration that does not work, it is where you want your data cards to be updated with the name of the active partner when an asset what ID is added to data cards. Is this correct?

  I looked in the settings of your configuration and found that the way in which the affected step is configured does not update data cards. You currently have your updated program of the contacts, but he must update data cards and cannot access it with the current settings.

  To resolve this issue, please complete the following:

  
  

  Step 1: In your custom document library object, at the top right of the page click on custom object and select custom object Record Services. In the Custom Object Services window, click the arrow next to new data and select Edit the Actions of Service. In the edit the Actions of Service window, in the lower right corner, select Add processing steps.

  
  

  Step 2: In the window add a processing step, set the option Add a single processing step, by selecting Add to step in the program under the drop down list generator step. Click Add at the bottom right.

  
  

  Step 3: In the window new stages of treatment, under required parameters select the records of custom in the drop-down list object value. Then under Conditional settings, click on the search button program step next to the value field. In generator research program window, locate the 001. Standardize step name asset in your program via the search by name of the step or the name of the program. Select it and click Ok. In the window of new stages of treatment, under this treatment step is executed, select always. Click on save and close. You can now close the popup windows.

  The program should now be configured to update data with your active names cards using the conditions in your update rule. The next document in Topliners shows the screenshots to help you: http://topliners.eloqua.com/community/do_it/blog/2014/07/29/how-to-feed-custom-object-records-into-a-program

  
  

  After that I did these things, he still doesn't. Then they gave me this piece:

  
  

  I checked the settings that you have configured, and I saw that the stage of registration service custom object itself was not activated.

  To resolve this problem, open the custom of the document library object and open object custom registration Services. Then, click the down arrow next to new data and select activate the personal Service Record object. Shipments of new form must now update as you wish.

  To update existing records of custom object, please complete the following:

  Step 1: You must also configure the data service option changed with same parameters provided in the previous note and activate the service as explained above.

  Step 2: Then to process the records, in your custom object click Reporting at the top right of the page and select custom object records the data. In the data window of the custom object in the top left corner, click Actions and select check all records. Click export, and then select export to Excel to save an Excel document to use for re - download.

  Step 3: Return to the home page of your custom object, click on custom object in the top right of the page and select Download custom Object Records. Enter a descriptive name for the download and click Next. Click Browse and select the saved Excel file. Click on Upload and preview the data, and then click Next. Under field mappings, click automatic mapping fields to pre-populate the target fields and make changes if necessary, and then click Next. Click the checkbox for map data cards and under Add data at the stage of program entries, use the program generator search to search for and select 001. Standardize asset name then click OK and next.

  Step 4: If you want to reuse these settings later, under download select store these settings for re - use and enter a descriptive name for the saved settings file. Otherwise just click Finish. Your existing data maps should show active names within 30 minutes (which allows to program the durations of treatment).

  These steps will run maps of existing data through the update rule. If it still does not work, you will have to call for Support for further assistance via a screen sharing session. The phone for each region contact information can be found on our page please contact us at: http://www.eloqua.com/contact-us.html

  
  

  at that time, I saw him work. So excited! As I started to move my test scenario to production, it broke again. Sigh. Oh wouldn't it be nice if test/production in Eloqua was not quite as painful?
  

• Turn my vm on after my esxi return of maintenance mode

  Hello

  I create a script to restore config network ESXI. My problem is that I'm missing the order lines that will make my VM on the host to detect that the host is out of the 'maintenance mode' and they will start their car.

  Kind regards

  Michel v

  You have a vCenter?

  If so, these virtual machines are not started on another node of ESXi through HA?

  With the help of an alarm would be an option?

• Maintenance mode enough to stop SAN and networking?

  Community of VMWare,

  We will present some maintenance on your LAN and SAN network that connects our system of blade HP C-7000 with about 14 5.0 ESXi hosts and 3 HP Lefthand P4000 Series clusters (6 knots), 3 groups of VM. Thus, the chassis of C-7000 whole as well as the SAN will lose network connectivity. We do not have a second VM or SAN environment to migrate customers to.

  Our plan is to:

  1. stop all the VM to its customers.

  2. place all hosts in maintenance mode.

  3 temporarily disable HA and DRS to prevent vMotion when the host is brought back to the top of the maintenance mode.

  4 judgment of the SAN.

  5 stop/Perform maintenance on the network LAN/SAN switches.

  6. turn on the network switches.

  7 turn on the SAN.

  8 disable the maintenance for the VM guest mode.

  9. turn computer virtual guests.

  10. turn on HA and DRS.

  This sounds like a good plan? Do you see anything wrong with it? I'm curious to know if maintenance on hosts mode will be sufficient to avoid problems and whether the SAN data store and the road reconnects. I'm afraid that if I completely stop the hosts, it will create problems of network such as vmNIC etc renumbering.

  Your help and your thoughts would be greatly appreciated.

  Yes, when we realize tests of UPS, we take the whole environment down, let the UPS stops completely and all...

  In addition, I also stop the hosts interview on the chassis as well...

  Have not had any problems... Touch wood

  If you do not change anything fundamental about the chassis or guests, you should be ok... And when hosts are down (if) then it won't matter if the uplinks disappeared... If you leave them in maintenance you will obviously see some, if not many, alarms

• How to control the number of fields in the Advanced mode in < af:query >

  Hello
  
  How to control the number of fields in the Advanced mode in < af:query >?
  
  Say I have 20 fields in my table, and I created a view of criteria with 2 fields. This would work perfectly in basic mode. But in Advanced mode , the choice of fields is possible by clicking on the Add fields button. I didn't have the customer to search with all 20 fields. Only 10 fields must be listed in the Advanced Mode, even if there are 20 fields in my table.
  
  How can I control the list of fields in ADDFields button?
  
  Any ideas?
  
  
  
  KR

  You can uncheck the contestable ownership of attributes that you must not appear in the Advanced Mode (but they will not appear in the other modes too!) or by programming the value the same as those mentioned here.

  http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.html

  Also, you can hide the button AddFields as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

• Query strings?

  Hey,.

  I'm relatively new to html and web design, but I wonder: why Muse add query strings on each url of the static resource? There must be a reason I don't understand, but remove them all manually works, so my question.

  THX in advance for the answers.

  Alucryd

  The query string is added as a kind of version number for the resource. This is used so that when a resource is updated, your users will immediately get the latest versions of it instead of what is in the cache on their local machine. It's a way to ensure that your users see the latest version of what you have created rather than see older versions, they studied recently. If you want to learn more, I recommend browsing the web and reading about case-cache.

• Query string and CopyFile &amp; Delay()

  Hi to all engineers,

  I'm fresh in labwindows & you have some problem with it.

  When I'm programming a program that allows users to enter address CopyFile by themselves, I found congratulate him differs from C. Who commends should I use for the query string? I use GetCtrlVal (panelHandle, PANEL_fileA, & address), but when I run it, it says "too small argument.  And after request chain, how could I record it to the sourcefile targetfile address in CopyFile?

  Another problem is with the command Delay();  Once I use Delay(), such as Delay (3600), the system can work, but the other buttons will be jobless. I don't have other ways to fix it.

  Could U please give me some suggestions?

  Thank you very much

  Wenxin

  Well, here are some suggestions for you.

  With respect to the file name, you may be passing too short a string to retrieve user input in GetCtrlValCVI offers a macro so useful to express the size of a string containing a path, or can dimension chain as a char address [MAX_PATHNAME_LEN]; , then passing it with its simple name (which is in fact already address): GetCtrlVal (panelHandle, PANEL_fileA, address).

  In this case, another clue is to check if the user gave a fullpath, backslashes included: they should be doubled, because a single backslash is interpreted in C as an escape code.

  But perhaps the best suggestion is to let the user navigate to the right destination and give the filename FileSelectPopup wusing, which returns the full path that you can use without formatting, and other changes.

  Regarding the delay, it actually stops the execution of the program until the end of the given period of time, so you must develop your strategy of suspension in a different way. Indeed, a 1 hour stop is a "suspension of activity" more that a simple break, and you must treat her differently, especially if you want to maintain an intervention of the user during this period. For example, you can let the system run disable or hiding banned buttons or divide the interval in littler slices of time using ProcessSystemEvents eprmit handle other events: there are several discussions in the forum that the point of discussthis, so you could did research on it.

  But the first suggestion I can give you is to run the tutorials if you did not already, in order to study basic documentation that comes with CVI and carefully consider some of the examples installed with the environment, which can give you a better understanding of the instrument you use, and answer a few questions as you have.

• The ESX host is in maintenance mode

  SE Vfoglight triggers always rules if an ESX host is in Maintenance mode? If so is it good for the maintenance mode that I can use to stop firing rules.

  There is such a property, inMaintenanceMode

• How to create the string of JSON using QVariantMap array?

  Hi all

  How to create sub string of Json using QVariantMap array?

  {
      "Test1": [
          {
              "dataTest1": "0000",
              "dataTest2": 1412,
              "dataTest3": "",
              "dataTest4": "0000",
          }
      ],
      "Test2": {
          "data1": 1412008,
          "data2": "0000",
          "data3": "A",
          "data4": "0000",
      }
  }
  

  Waiting for your answer please reply me as soon as possible.

  JSON array is QVariantList

  JSON object is QVariantMap

  then create a QVariantLsit and insert your QVariantMaps