Major issues

Similar Questions

• Major issues with El Captain upgrade on MacBook Pro

  Hello

  Since I have improved my Macbook pro 15 "mid-2010 for the El Captain I have major problems.

  -Until ' to and more than 5 minutes to start

  -Slow to open all apps

  -The machine restart without reason

  -Continuous gel (I feel like I'm on a PC running Windows 95!)

  How can I solve the problem? Downgrade pOssible?

  Thanks in advance for your support!

  To go back:

  OS X El Capitan: revert to a previous version of OS X

  Yu can also

  Run this and see the results here, so we know more info about your Setup and we help to El Capitan working

  EtreCheck

• Major issues with Satellite S70 - t wireless has

  Hello

  I received a Satellite - S70t 31/10 and then had some problems wireless. From the start up my computer and began its activities on the internet, I suddenly noticed the sudden slow but also many problems such as the loss of packets and ping (which I had never experienced before) high.

  After some tests, I came to the conclusion that it is either something wrong with the wireless adapter, or on the other hand is not compatible with my router. I had questions everytime I open the laptop and connect to the internet, where my reasoning.

  I've updated the drivers for the wireless adapter, but it did not help.
  I am running a router Netcomm NB9wmaxxn.

  I hope that it will be able to be resolved quickly.
  Thank you.

  In my opinion you issue needs further investigation.
  It isn't quite clear, if the Wlan problem is related to the network card wireless Wlan driver, Wlan router or maybe the combination of the Wlan router and module Wlan.

  In my opinion, you should check if the same thing happens to connect the phone to another access point.
  You should check the laptop with or without the power adapter connected.
  Energy savings can affect the performance of Wlan.

  You should check if the problem could be related to the intensity of the signal.
  You should test the connection network wifi secure Wla also open Wifi (unsecured).

  Check also different standards of WLan 802.11 A B G N
  Of course, this test depends on the Wlan module. In the case of the wifi card does not support the 802. 11A, you will not be able to verify this.

• Two major issues... A reasonable conclusion?

  Hello

  My name is Jake.

  I bought a brand new factory sealed HP laptop from Argos on September 7 (today a week ago). I used to work in electronics, so I checked the box to make sure that it is well sealed, and it is certainly appeared like that and be in perfect condition.

  Open the laptop and going through the initial start-up, the very first thing I did was open a browser window, only to discover that it was already hijacked by Browse - Search.com.

  The second thing I did was install maware-bytes, which is several hundred pieces of malware...

  Today the guaranteed HP tool pops up and informed me that my warranty was valud until 24/06/2014... nearly three months less than the year of a standard guarantee should be.

  So what is the story here? Have I been sold a refurb? A slyly re-packaged hand model? Or am I missing something? I feel particularly irritatedand would appreciate any input here.

  Thank you very much

  Jake

  Jake, I will agree with Dragon and Danny, your first step is to take the camera back to where you bought it from.

  There is no excuse for the end of the period and if they are also deemed as you say, then they will have no problem sharing the computer or refund.

  If you feel still so inclined to inquire about warranty issues HP and time of purchase, you can directly contact the HP Support for your region.

  Contact HP worldwide | HP® official site

• major issues after photoshop cc 2015.5

  Hello everyone, I'm having some major problems with the new update. After you download the update, I've lost all installed fonts and actions. Someone else has encountered this problem, and is there a way I can get these? I recently had some problems with 10 windows and had to do a reinstall, this could be the problem? Thanks in advance for any help.

  Hi randya,.

  Refer to these similar topics:

  Charge of 2015.5... Now the workspaces, Menu links, Actions etc. - ALL GONE - HELP!

  Photoshop todays update [Plugin filters are missing.] How to restore?]

  Concerning

  Claes

• Major issue - rating percentages

  Hi all

  I talked about this before--how to seduce concerning all issues in a project under the quiz and quiz result results. Well it becomes a question of nightmare for me - I knew not that previously how bad - as I was only focusing on not being able to manipulate the number of questions considered captivate as part of the quiz... the biggest problem is of course with how it calculates the pass / no percentage. The percentage is calculated according to the score / number of questions. Therefore my assessment might have 10 questions which are the result (for example 10 possible points) so that it might be 15 questions in the project.

  The variable number of question is not put at my disposal in captivate - this is a system variable and I can't handle it, that's why I can't control how the percentage is calculated. It is very frustrating that something so simple has become such a puzzle.

  In short there is no way to remedy this problem when it comes to percentages. What I do is I get captivate to the report from the LMS as a note and not a percentage. I also have captivate to calculate the pass / fail based on a score of only. But I prefer to use percentages.

  Why they have done that? I need to be able to calculate the percentage based on what I consider the part of my appreciation.

  Anyone have any ideas here?

  
  

  Hello again,

  It is perfectly possible that I misunderstand your question. But the percentage that is used to have a pass/fail status is based on the minimum score setting you specify, not on the 'precision' which appears in the score slipped. I know that sounds confused. Did you really check the 5 non - scored questions are taken into account for the pass/fail status?  An example of a test that I created recently, I got:

  1. items identified for a total score of 25 points
  2. question slides for a total score of 15 points
  3. lots of objects non-incise
  4. 1 question unmarked

  The total score is 40 points, with a minimum pass mark of 80% the Pass status is granted to users with at least 32 points. But the accuracy of the score slide refers only to slide 4 question. The LMS reports is, however, correct.

  I really want to know if I understood everything right? You have a different experience?

  Lilybiri

• Major issues with plugincontainer.exe gel firefox 34 CPU high usage

  Plugincontainer.exe is ruining my experience with firefox by endlessly to freeze due to the high utilization of the processor. Please provide a work around or another solution. Thank you.

  Thanks for posting back. Looks like it's pages using the plugin container are the important source of the processor.

  It is possible to disable hardware acceleration of Flash to see if there are improvements:

  • Flash Plugin - maintain and troubleshoot

  Please tell us if it helped!

• Download the latest Firefox - major issues nubby

  I'm on a mac, running FF 3.6

  I want to download the latest version. I'm on the FF website, click Download the latest mac version, and it downloads the file. The instructions say 'drag FF to the Applications folder and then use' basically.

  However, once the download is complete, there is an empty block where the icon of Firefox should be next to my Applications folder for me to slide transversely.

  What Ruddy monkey pudding is all that?
  I just want to navigate safely, but I can't use the latest version downloaded from my favorite browser.

  Download the latest version of Firefox using one of these links:

  • http://www.Mozilla.com/en-us/Firefox/new/
  • http://www.Mozilla.com/en-us/Firefox/Central/
  • http://www.Mozilla.com/en-us/Firefox/FX/
  • http://www.Mozilla.com/en-us/Firefox/all.html

  Uninstall your current Firefox

  • http://KB.mozillazine.org/Uninstalling_Firefox
  • DO NOT SELECT DELETE THE SETTINGS AND DATA OF THE USER
  • Restart your system

  Installing Firefox on Mac

  • https://support.Mozilla.com/en-us/KB/installing%20firefox%20on%20Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

  Check and tell if its working.

• Satellite L850 - 1-5 - major issue

  Hi all

  I have a L850 - 1 5 Satellite that looks dead, but when it is plugged into the electric network, press Num Lock and Power LED will Flash and the cd rom drive clicks as if begins to start (without even touching the power button)
  Any ideas?
  Thanks a lot :)

  And what happens when you press the button walk / stop?

  Unplug the AC adapter / CC, remove the battery and press the power button for a few seconds. After doing this leave it a few minutes, connect the power adapter only and see if the same thing happens again. When you try to start it happen exactly?

• Major issues Satellite L300

  What was initially a freeze randomly to up while wi - fi has turned deadly. Its made my month old l300 (PSLB0C-07N08C) completely usless. Initially it would stop doing whatever it is, you can move the mouse all day long, but you couldn't click on anything and nothing would load.
  This would happen randomly while wifi and maybe after 3 or 4 hours of navigation. Now its doing at every start. I can start the Task Manager and that's it. In the minute of logging in vista, it freezes again. You can not load any other programs.

  So far, Ive tested the memory and its fine, I was able to load the resource moniter and hdd is 100% all the time. Its really a crippled system. Background processes are still running, but nothing does. I can't even start safe mode, he is obstructing crcdisk... Does anyone else have this problem?

  Sounds like Windows is damaged, or a bad driver/software is hanging the system.

  I would try a new installation of Windows. Back up your data and perform the recovery.

• Major issue after installed Windows 10 own attempt Y500

  Idea pad Y500. 1 TB hd with 25 GB SSD. I upgraded from Windows 8.1 for Windows 10 yesterday. It went well, but I wanted a clean install. I found my new Windows key in case I needed it. He got 16 percent and has grown steadily for 12 hours. So I did a hard reboot, it asked if I wanted to continue 10 Windows, I said yes, then he attempted to restart. It is now now stuck in a reboot loop, where it it is only on the Lenovo screen at the first reboot, nothing indicates that Windows is still there. It restarts every 20 seconds or if... I have no idea what to do now.

  I saw a video of a person with a desktop computer that has disconnected their solid state drive to solve their problem of Windows. Has anyone tried this before? I'd take maybe in there, but I am in Ecuador and do not speak Spanish. I won't be in the States for months...

  I was able to remedy. Windows loaded ten from another computer on a flash drive. Tried all the options load Windows ten Setup/BIOS and none of them would work. Said that my discs were badly formatted. Finally, I disconnected the flash player and magically it started with a new copy of Windows 8. I have redownloaded Windows 10 and loaded, now it works perfectly.

• Major issues with Media Player for XP SP3

  Since my hard drive crashed and I got one installed, my Media Player keeps giving error messages, will not play one thing and destroyed the tracks I can't fix it even with the Fix It guy. Same problem is showing errors in the installation. What can I do? I got mp11 when this happened. I uninstalled and restored to mp9 (which I prefer). Still no go. What is the problem? How this damage? How can I solve this problem? I'll have to go back and erase my entire hard drive with re - install Windows or what? Old, old computer install CD. big step backwards. A lot of time for the updates to reinstall. Someone tell me please another way. I tried to implement everything. Or I? HELP PLEASE!

  Hello

  1. what error messages are you getting?
  2 did you have to re install the operating system after the new hard drive?
  3 have. what FixIt you tried?

  Please try the following methods and tell us if it helps.

  Method 1: Please try the following troubleshooting utility.
  How to troubleshoot playback in Windows Media Player 9:
  http://support.Microsoft.com/kb/811982

  Method 2: Please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 3: Run the System File Checker and check if the problem still persists. To do this, please click on the link below:
  http://support.Microsoft.com/kb/310747
  If you are prompted to insert the disc to scan sfc, please visit the link below:
  http://support.Microsoft.com/kb/900910

• MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems

  Community salvation and Lenovo,

  He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)

  THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.

  Hi Ran,

  Thank you!

  I have not yet tried.

  In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(

  Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283

  again and again, I decided to return to the old driver wireless Intel on this page.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256

  Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12

  I tested it again... THIS MARKET!

  Please try this combination:

  BIOS version: 1.15

  Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000

  ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62

  Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52

  ThinkVantage Productivity Center Pack Version: 3.02

  Power Manager for Windows Vista Version: 2.41 has

  ThinkVantage Access Connections for Windows Vista Version 5.12.

  Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0

  Kind regards

  Ritchy

• Add the precomp major issue mask

  I guess it's yet another bug in AE 13.6.1.6?

  I took has several layers with overlays, precomp... nothing new here.  Click on the "for layer Comp: Transformation of the collapse" button to keep my overlays... again, no problem. Ahh, now add another layer as a 'matte' and all recoveries precomp disappear and do not work.  Really making me nervous, tried 6 ways to Sunday to work around that and I cannot.

  

  If there is only one fusion mode then just grab the blending modes in the layer (pre-comp) nested and edit it to add. Which is available even if it is not visible. Everything that you CT will work. If you're just hide or animate the lower third with a cache by approach then CT should not be necessary. Don't get me wrong. I use ways of merging all the time. I just know that if I want to embed a layer that has a bunch of mixed modes and I need to hide this layer nested with a matte or mask that I have to design so that I have not to condense the transformations or I'll have to animate the mask or add the mask in the nested model. I have this all the time. Unless I'm completely wrong, understand the use of the matte, I see no reason that it could not be included in the demo.

  Give the blending mode to ADD a test on your computer at the title bar of switching. I could offer you a better suggestion if I knew what was the structure of the model.

  If it was me and the place with 13 inside and the bar with the necessary addition mode comes alive with a matte that I'd keep probably the two layers in the main comp, parent from one to the other and use Set Matte to wipe it off with a demo as a source. Another approach would be to implement the expressions to animate the size of the shape layer, you use the bar based on the in and out point of the layer, perhaps put the 13 in a box on the same shape layer, use blending modes internal and trains facilitators to make the box blade in as needed without keyframes at all. Just setting the in and out point would do it. The shape layer would then be saved as a preset. This is another thing that I do all the time.

• Major issues trying to uninstall and reinstall. If anyone can help?

  CS6 purchased Win7 2 years plenty of license. It appears at the top of the menu apps, then again in the Adobe folder where it is installed twice. Shown in the images. Those outside the folder do not work, and those inside only some work. How can I clean it?  No display applications Adobe CS6 in the uninstall from the control panel. So I can't delete them it. When I try to install again, I get the error messages.

  

  

  Error

  

  Please visit:https://helpx.adobe.com/creative-suite/kb/uninstall-creative-suite-cs5-cs51.html

  I hope this helps.

  Concerning

  Megha Rawat