Re: Satellite A105 - recovery DVDs cannot start

Similar Questions

• Satellite A60: keyboard does not work, the recovery DVDs cannot run

  Hello

  I have a serious problem with my A60: the keyboard no longer works. I tried many solutions and the last of them, recovery with the Recovery DVD - ROM product does not work, because I can't use the keyboard!

  When the screen with the 3 choices, I have no opportunity to respond.
  Someone has an idea?

  Thanks a lot for your answer.

  They keyboard might not be the problem, or it may not be connected properly to the motherboard the best thing to do is to take it to a service center, it should not cost you anything, if it is still under warranty... but if it's just the keyboard and your laptop is out of warranty then it should cost more than 100-200... can't say how much exactly, because I have no idea.

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Re: Satellite A105 - seeing of power started flashing orange/battery not charging

  I have a satellite A105-4054, which gave excellent service. Yesterday, the orange started power light flashing and ceased to charge the battery. I had a second freshly charged battery, that I used instead and the power led still flashes in orange.

  I checked the Original Toshiba charger that came with the device, with a voltmeter and it shows 15 volts, which is correct. The laptop starts normally with a freshly charged battery, but it does not load when it is plugged and the power light flashes orange constantly. If I remove the battery and leave the laptop plugged in, continually amber power light flashes and nothing happens (no voltage). I'd be happy to run just the laptop on AC, but it is not possible now

  The toshiba power utility system icon, when the laptop is started on the new battery, flushing back and forth between the load and the battery, and the battery does not seem to charge. Previously, the power utility would show current alternative continuously when the unit is connected and the power light stay blue.

  I love the laptop, because he rendered services superb and would like to keep. All reasonable solutions, please?

  Thanks guys (and girls)!

  On this virtual path, no one can say with certainty what the problem, but after reading your detailed ad, I think there is problem with electronic power supply on the motherboard. Technicians with tools only special diagnostic can say with certainty what the problem is here.

  In my opinion there is not a lot you can do about it, and in this case, entire motherboard must be exchanged. If you want to contact the nearest authorized maintainer, explain the situation and I hope that they can tell you more.

• How manually to create the Satellite A300 recovery DVDs

  Hi all!!

  My cousin interrupted at first startup of Vista, resulting in a constant error while switching on the laptop (say a word about the disconnection of a camera or a media player). I decided to perform a clean install of Vista Home pre and everything was ok.

  I have a return to the top of the HDD Recovery folder and tried to burn a DVD using as prototype of my recovery dvd (A200-1J0) who proved not bootable.
  So, I would like to know if it is possible to make a recovery dvd manually (which means that without the wizard mentioned in the user manuals) for laptop Toshiba A300-17N.

  Something like this is not possible. If the folder HDDRecovery still exists on the second partition, please start your laptop and press F8 for advanced startup option. Use first option on top for the repair of computers. Follow the menu und opt for Toshiba HDD recovery.

  Reinstall the OS and create recovery DVDs using Toshiba tool preinstalled.

• Satellite A105-S4164 - will not start only white screen

  Hi all
  I have a laptop Toshiba Satellite A105-S4164 that will not start.

  I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
  All I see is a white screen.

  My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.

  Thank you for your comments.

  Seyed

  You can see an image on an external monitor?

  Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Satellite A300 - 21 H - cannot start HARD drive recovery

  My daughter dropped the laptop. Now, I get a blue screen that says I need to press F8 to start the recovery process. But when I press F8 nothing happens... Any ideas? I would really appreciate any comments.

  > My daughter dropped the phone. Now, I get a blue screen that says I need to press F8 to start the recovery process. But when I > press F8 nothing happens.

  According to me, that there is still something wrong with the hard drive after release. You can enter the Bios (f2 at startup) to check if the hard drive recognized. You can see on the main page or startup option.

• Satellite C50D-A-13W - cannot start extern DVD

  Hello

  I can't boot from a DVD-driver extern (to install Win7, the trainee pilot is broken). I changed the boot order in the BIOS, I have disabled the start safe mode and I changed the UEFI mode to MSC mode, but it always boot from the HD.

  What do I need to spend more?

  No, you don t need to change anything else
  I'm afraid of the boot from USB external DVD/CD drive isn't taken supported by BIOS of m.

  As far as I know that the BIOS supports booting from the following devices:
  Internal drive HARD USB, ODD, primary drive HARD internal, USB memory, network

• Re: Recovery DVD tool starts with error message

  Hello.

  Can someone tell me why when I run "create a dvd recovery tool" message appear with "cannot find the partition recovery...". » ???
  It's a whole new Satellite A660 - 1 c 3 bought and opened today.

  This happen if the recovery image is removed or deleted.
  When you buy the new model of notebook and start for the first time preinstalled image must be installed first.

  So if you are capable of operating system pre-installed usage it means you had a notebook with the recovery image on it. I put t know what you did but fact is this structure partitions or the backed up data are changed.
  Have you changed anything in the tool of management of disk (develop partitions, change the ability of the partitions)?

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Satellite L350-14F - Vista cannot start the Realtek RTL8101e WLAN

  Dear readers

  I'm Dutch, if my English is not very good, so my apologies for that but I have a big problem.

  My Toshiba Satellite L350-14F with Realtek RTL8101E family PCI-E fast ethernet NIC (NDIC6.0 with Vista OS) cannot establish a connection with the outside world...
  I tried many drivers, but all do not work... I can't find any other driver. So I guess there must be something else on the computer...

  I reinstalled my computer while going to format all my hard drive and I have no CD of drivers for the laptop.
  When I got a _wired_ connection, Vista can try solve the problem itself. He found a driver and then I am redirected to a site of toshiba... Where to download a driver from East. I start the download and installation, but then the installation says that I don't have a correct serial number...

  All this me freaks out there... who can help me please?

  Greetings
  Roy

  PS: I checked my BIOS for strange things and one thing caught my attention on
  I have an option: Wake On LAN anti-piracy. And it is disabled
  BUT I can't change it to activate.

  Hello

  First of all, it would be interesting to know what you mean without link with the outside world
  The wireless network card is recognized correctly in the device (without yellow exclamation points) Manager?
  The router is visible on your computer?

  First of all, you must make sure that you use the latest WLAN driver on Toshiba website:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Additionally, make sure that you have installed the latest version of BIOS that you can find on the site of Toshiba, too.

  You should check the WLAN Setup on your laptop and the router. Make sure you that you have disabled Vista of WLAN power save function. You can find this option in Vista Power Management.
  Make sure that you use the same standard WLAN on your laptop as on the router, for example, 802. 11B or 802. 11 g.
  Last but not least you must update the firmware on your router. You can find it on the site of the factory. After the firmware update unplug the router for 5 minutes of the AC adapter.

  Good luck!

  PS: Wake on Wireless LAN has nothing to do with this issue. It of a feature that you can boot the laptop via a WLAN connection.

• Satellite A100 - 510 PSAA2E cannot start - nothing on the screen

  Hello

  I had Satellite A100-510 (PSAA2E) since May 2006.
  2 weeks before, when I tried to switch the fans started spinning and the LED lit and after about 2 seconds, it restarts without showing anything on the screen.

  There is also no beeps or anything.

  I tried almost everything: remove the hard drive, screen, wireless card, dvd player, change the RAM between the slots...
  It makes no difference if.

  So I think it's a problem of memory or the motherboard is dead, what do you think?

  > So I think it's a problem of memory or the motherboard is dead, what do you think?
  Yes, the mentioned parts could cause this problem

  But it would be the worst case and you must contact the Toshiba ASP for more details

  Before that you would get in contact with ASP, I recommend you try this:

  -Remove the battery, disconnect the adapter.
  -Wait 30-60 minutes
  -Bring the two parties together and try to turn on the laptop

  Maybe if this work around short help

• Satellite A105-S4344 - DVD playback is slow & audio is choppy

  I'm having a problem with DVD playback on my a105-s4344.

  DVD playback is delayed, slow and audio is choppy and delayed also.

  BUT the movies that I play through iTunes work well, those who are bought and on my hard drive.

  It only occurs with DVDs I try to play in any program I try to play the movie.

  I tried several movies, new, old, burned, bought, etc.

  All the same problem.

  Help. I don't know what to do.

  Hello

  If this delay seems to play only the movies and audio by using the CD/DVD drive, then you should check this short work around:

  1) access Device Manager
  (2) expand the IDE ATA/ATAPI option
  (3) go to the primary IDE channel-> properties-> Advanced settings
  (4) here, you should check if DMA if available has been chosen
  If it s not set to DMA if available, then remove the primary IDE channel of the list of devices and reboot the laptop.
  After that the laptop has started again, check again the single point and check if DMA if available appears again

  Welcome them

• Satellite Pro C660-2JN cannot start Windows - status: 0xc00000e9

  I read about this status code & the best advice from Microsoft saying that system restore can help. But it was stupid help because I can not load my system because I cannot complete startup repair because after clicking on windows for loading the files bar does not end up being completed!

  Instead, I find myself in the Windows Boot Manager to attempt the repair I've tried 3 times.

  Is there anything else I can do without having to pay money for parts.

  Thank you, mike

  Could you provide some essential information?
  What model of laptop you have exactly and what Windows OS are you using?
  Did you create recovery disks in the past?

• Satellite pro A120-151 - cannot start more HARD drive

  I removed the laptop HARD drive to copy files on the master pc because of the virus. The problem is when I put the HARD drive to the laptop, I can't start windows. It comes up with the usual start screen. The 1st BIOS password: I entered and I press on and get said its CERTIFIED.

  But just, it is there and don't do anything else. I then rebooted from CD so I can access the HARD drive, the HARD drive is ok and connected. I went into the BIOS and put the password password BIOS and the HARD drive. Returned to enter my password and got the message saying.
  CERTIFIED, HARD DRIVE HAS BEEN UNLOCKED

  Yet once it is just what I can do?

  Hi mypcclean,

  Maybe you have the virus on your laptop and so, you can start t more?
  This would also explain why you can access the HARD disk with a bootable disc.

  I doubt that's a problem with your laptop, I think that you need to reinstall Windows. You can take a Toshiba Recovery disk to reinstall Windows.
  Check it!