Make a copy of the image of laptop

Similar Questions

• How to get or make a copy of the Windows 7 OS disk?

  How to make a copy of the Windows disk? Similarly, is there a way to copy

  from the computer to a CD/DVD?  What happens if the hard drive crashes ever?

  I have a refurbished Dell Latitude E6410 with Windows 7.

  I bought at Staples.  I think theres a way to make a recovery disk and should be a means of

  make a backup of o/s disc.

  My Dell 2003 desk top comes with the OS and disk drivers...

  but not my two latest laptops.

  You should make a Rescue Disk (external hard drive Bootable) or backup (Bootable USB Flash Drive) plant using the latest version of Dell backup and restore. See here for more details:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  I illustrate how to create the recovery media and use it to install the factory settings on a new SSD.

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• Collection of Nik and view the modified copy of the image. Virtual copy - where is it?

  Once I have reduce noise in an image using Nik Colllection set 2 and save, I'm back in Lightroom. However, I do not see a copy of the image, that I worked on-I see yet only one image and it's the original image before exporting to Nik set 2.

  In addition, I note that I do not see virtual copies I was doing once I had created one in the film strip. However, when I save a virtual copy, I get the message saying 'Virtual copy 2' created. If I repeat the process of creating another virtual copy, I get the message saying "Virtual copy 3" created.

  I have two questions.

  1. How can I see the edited picture in the film strip that I applied 2 set to?

  2. How can I see the virtual images in the film?

  I have changed a setting somewhere... Can someone please offer advice?

  Start at the beginning:

  When you call Nik programs within LR, you create a TIFF file with or without LR adjustments, then the Nik tool is created. When registering save you to this file. This file is part of your LR database.

  By creating a VC, you create a VC in the current folder, which is seen from the Interior of LR, but not outside. But it's the LR database bart.

  What I suspect is that you work from within a collection and especially the last imports collection. I would suggest pointing to an image with the right button of the mouse and using the "go to folder LR" (from memory!). There you should find all your files. (Nik) TIFF files should also be available to the OS (Finder or Explorer).

  The other possibility is that you have applied a filter to display only certain images, and files of VC and Nik files get hidden by the filter.

• Is it possible to make a reflection of the image that will change with the image? [was: reflection]

  Is it possible to make a reflection of the image that will change with the image?

  

  I believe that a dynamic object will solve your problem.

  Place your original image to a new file as a smart object and do the same for reflection (made by processing, reducing the opacity and introduce a slight blur horizontal) on its own layer, then:

  by double clicking on the smart object in the layers panel and return to the original image, any change in the original and save, automatically update the vertical image and its reflection.

• How can I make a copy of the FAQ module or the filter on language?

  Hello

  is it possible to make a copy of the FAQ module? I need to have FAQS in various languages.

  I can add event, photo, new ANDS media modules, but not a new module FAQ.

  I also found that you can add a category and view the frequently asked questions with the filter: cr or individual filter. But where do I add the category name to filter?

  Solved!

  Quick fix: the ID is used for the name of the category, so I need to make a tedious process to find the ID.

  Result:

  {module_faq, c., 19227, ajax,}

  Great!

• Copy of the image works only disk based backups?

  DB version: 11.2
  
  What is the command to SWITCH DATABASE to COPY for?
  
  In the thread above, I have in the whole of clause SWITCH used with COPY of IMAGE
  
  Example provided by Julien
  

  You can also switch a datafile
   
  for example;
    
  RMAN>sql ‘alter database datafile 2 offline’;
  RMAN>switch datafile 2 to copy;
  RMAN>recover datafile 2;
  RMAN>sql ‘alter database datafile 2 online’;

  I understand that if you COPY of IMAGE backups and if you lose your data files, you can switch to the image immediately RMAN backup then recovery will be quick.
  
  So, it means that the COPY of the IMAGE of RMAN cannot be made to the drives (no tapes). Right? That is to say. If it is in the band then

  RMAN>switch datafile 2 to copy;

  will take a while. Right?

  You don't want to go to a copy on tape because the band does not provide random access (and certainly will not support simultaneity)!

  AS a BACKUP COPY can be done on the disc.

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta007.htm#CHDEHBEJ

  "A copy of the image is an identical copy of the byte to byte in the original file. You can create backup image files of data, copies of data files and archived redo logs. Copy the image files may exist on the disk. »

  Hemant K Collette

• Upstream 13: make a copy of the USB of computer image 13 Stream

  It has come to my attention that the image USB copy that I compiled may not be usable as a way to reinstall windows 8.1?
  I learned that the Scandisc USB flash drives which I used are not designed as a way of copying and for the resettlement of same OS if the disk image I can say copied ok. This has now been confirmed by Scandisc. The question is now how do I make use of the unique copy of my computer image I have on my flash Scandisc disc and what USB memory keys are designed to provide a useful computer image copy?
  I hope someone can advise me on this.

  First of all, make sure that you start from the USB port. On the portable stream you constantly hit the ESC key when you turn it on to bring up the BIOS Menu in the upper left of the screen. Choose Boot Options then choose USB Flash Drive and it will boot to a screen that says select your keyboard type.

  On mine US is by default I chose that.

  Now, click on the button problems. Click Reset your PC.

  Select the target operating system. Windows 8.1 should be there. If it says Windows 10 and you want to come back to win 8.1 choose it anyway.

  Then, after clicking on the target operating system you will see a screen that says: 'This is what will happen', click Next, and then click YES, repartition the disks.

  Make sure you choose the option in the final stage, which said just delete my files. Do not select the option completely clean.

  Wait 45 minutes and your system is restored from the factory.

• Make a copy of the recovery media which can no longer be ordered from Toshiba

  I have Toshiba Portege M200 computer without recovery media. Because the computer is old media are not available to order from Toshiba.

  If I found a person who is the original owner of these media I could make a copy of it to use with my computer when I have a valid license for Windows and other software on the recovery disk?
  I don't volatile legal terms?

  In General, you can use a recovery of other media laptop, but there is the same model of laptop with the same hardware configuration.

• I created a DVD of a video cassette (without using the PC). I would now like to make a copy of this DVD (DVD - RW) on the PC. How can I make a copy of the DVD?

  How to make a copy of a DVD (-RW) by using Windows Media or any program using PC?

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy.

  If you have software installed Nero should have
  an option for copying DVDs.

  Also, the following method can be your answer...

  The following freeware can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.5.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Make another copy of the DVD from a DVD created from Windows Movie Maker

  My laptop was stolen recently and, with it, a slideshow (with audio) I had created on Windows Movie maker.  I have a disc I created after the completion of the project.  He plays very well on an external DVD drive.  However, when I download it on my new laptop or try to copy it to another disk, it does not copy as a movie.  It seems that it changes the formats and any copy I made will not play on an external DVD drive.  Is there a copyright protection or something embedded on discs created from Movie maker.  Any advice on how to make a playable copy would be appreciated.

  No copy protection is used.

  How are you trying to copy it?

  You will need something like roxio or nero and their software disc in copy, or import the movie in movie maker and then recreate the dvd disc again from scratch in your creation to dvd.

• Unable to make a copy of an image

  After installing windows 10 and then back to 7, I am more able to make copies of my photos.  The desktop icon I have for the shortcut of photos has a top lock. How can I fix it?

  So far, you said this:

  -L' desktop icon I have for the shortcut of photos has a top lock. How can I fix it?

  -When I click with the right button on the image file, then go to properties, the Security tab does not appear.

  Your first statement means only administrators can change the desktop icon.

  The second statement probably means that the forlder of photo is stored on a FAT32 partition.

  These are two completely different subjects.

  Your first statement reads as follows:

  After installing windows 10 and then back to 7, I am more able to make copies of my photos.

  To avoid other confusion that I recommend that you declare step by step what you do and what you see on the screen, for example as follows:

  1. Double-click the image of the desktop icon. My Pictures folder opens.
  2. Right-click on an image, then click on copy.
  3. etc etc.

• Make a look of the image that it could be an illustration on a beach towel

  Hello

  I was wondering what would be a good filter to use or another way to take a picture and make it something that may look more like an illustration for a beach towel. I'm going to do something like the home, where they took a watch, keys, iphone, sunglasses and money and makes them to illustrations. Thank you!

  

  If I was getting hung up on the beach towel, but you were only interested in the Duotone on the napkin images?  If so, it is indeed very easy.

  Open an image.  If you want a plain BG, then you have to select the object, and the copy in a new layer and fill with black or white BG.

  Then go to Image > adjustments > threshold

  This will have the effect to the image of the Center.  Note You can addjust point to what happens the transition with a slider in the threshold dialog.

  You might find the effect very hard and a few jaggies.  If this is the case, use a Gaussian blur to soften and if you wish, they must harden again with levels or curves.

  If you want a BG color other than black, add a new layer and fill it that color.  Then set its blending mode clarify.

  

• How to copy / paste the Image

  I received a PDF file with an image only - no text.  I would like to copy / paste this image twice so that I find myself with three of the same image on the page.  Adobe TV makes it look so easy, but I noticed that there is an area of text around the image. The image I have is not in a box.  I can put a box around it somehow, or is there another way to copy and paste? Help, please!

  By copying and pasting an existing image in the same PDF are not really simple in Acrobat X. First, select the image with the selection tool, then right click and select copy the Image. Next, you'll need navigate to the comment pane and click the stamp tool. and select Paste the image to the Clipboard as stamp tool.

• Server copy of the images between devices - break Shared Services?

  Upgrade to 11.1.2 and servers pass test to the production environment. We want to configure MSAD with Shared Services and fixed deposits on our shared production SQL Server.
  
  Our final goal is to copy the image of the 11.1.2 servers (not the shared sql server) and turn it on newer hardware.
  
  My concern is the properties/java files that can hard-code the static information that may exist on the original farm.
  
  No matter who with 11.1.2 makes a picture to another server hardware and has experienced problems of connectivity to Shared Services or repositories?
  
  JTS

  If everything has been recorded against the name of the computer, then in theory, you should be fine if everything else is to stay the same, it should allow IP address changes.
  I know that in the early days of the system 9 he had some problems with the IP being stored, but it should not happen now.
  Although I cannot give you a 100% guarantee because there is no guarantee with 11.1.2

  See you soon

  John
  http://John-Goodwin.blogspot.com/