Make an expression count by tens

Similar Questions

• How to make my expression in a "Preset"?

  Hello

  I have a question. Is it possible to make my expression to be a "Preset" so I can use it again and again. If possible, how to generate a control because the value of the variable within the expression in the pre-selection? Thank you

  You can save a property or set of properties (including their keys and expressions images) as an animation preset in the usual way:

  Using After Effects | Effects and presets animation presentation

• How to make SQL * more count the comment and blank line numbers?

  Hello

  Parameter	Value of the parameter
  Oracle version	Enterprise Edition Release 11.2.0.1.0 - 64 bit
  OPERATING SYSTEM	Linux Fedora Core 17 (X86_64)

  I would like to know, is it possible to force SQL * Plus to provide the number of the current in the source file line whenever there is an error? I often put in the first line of my script SQLBLANKLINES the VALUE ON that I may be able to put several consecutive blank lines in my code (I do that sometimes, when I find that it is appropriate to make my code more readable or a sequence of instructions which I believe make their logic more comprehensible for the reader of the Group)

  Now the problem is that SQL * Plus will ignore these empty lines and whenever there is an error, the line number in the error message does not match the actual line number in the source file, but it seems to be the last non-empty line in the file.  Consider the following example:

  SET SQLBLANKLINES ON;
  
  DECLARE
      var PLS_INTEGER := 10;
  BEGIN
  
  
      
      var := 20
  END;
  /

  In the code above on line 9 (also counting blank lines), there is an error (no semicolon at the end of the var: = 20) but when I run the script

  SQL * also, here is the error message I get

  
  

  SQL > @myscript.sql;

  END;

  *

  ERROR on line 8:

  ORA-06550: line 8, column 1:

  PLS-00103: encountered the symbol "END" when expected in the following way:

  * & = - + ; <>/ is mod remains not rem

  < an exponent (*) > <>or! = or ~ = > = < = <>and like2 or

  like4 likec between | submultiset of type multiset Member

  The symbol ';' was replaced by 'END' continue.

  
  

  SQL >

  
  

  As you can see the error message indicates that the error was found on line 8, while in the file, it's really on line 9

  As long as the number of lines in the script is limited, this may not be a problem and we can quickly find the actual line number in the code that causes the error, but for a code, including hundreds (or even thousands) of lines and with many comments and blank lines, find line number given by SQL * error message more becomes complicated.

  So my question: is it possible to make SQ * more properly draw the line numbers, as they appear in the source file?

  Thanks in advance,

  Kind regards

  Dariyoosh

  Hi, Dariyoosh,

  The line numbers in error messages are always from the beginning of the statement, but not the file.  The back-end which checks the errors and generates the error message, has no idea if this statement has appeared in your file, even if the statement was in a file at all, or if it comes from multiple files, each with its own line 1.

  You can divide your scripts into parts, so that the long statements, which may lead to error messages, are each in a separate file, so the statement starts on the line 1 of the file.

  For example, you can call a script called fubar.sql, which looks like this:

  SET SQLBLANKLINES ON;
  
  @@fubar_1
  

  Which calls another script, called fubar_1.sql, located on the same directory as fubar.sql, that looks like this

  DECLARE
      var PLS_INTEGER := 10;
  BEGIN
  
      var := 20
  END;
  /
  

  You never call him directly fubar_1.

• When you send a link to a web page, how to make Outlook Express open rather than Outlook?

  Web page, I click on file, then send the link.

  Outlook opens.

  I would like to than Outlook Express to open.

  How to do this?

  Jack, Mevorach, Esq.

  See this.
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• Make an express airport only connect to an another AE and not the main Time Capsule.

  Hi all

  I have a Time Capsule airport and 2 Airport Express. The Capsule is far and an of the expressed airport is in the middle (call this) 1 and the other far from it, I'm calling this 2. As it is now, the 2nd Airport Express terminal connects to Time Capsule. However, it gives me much lower speed (Interruptions during the game). But if the 2nd Airport Express connects to the AE first, which is the extension of the network of transport CANADA, significantly improves the speed.

  I've tried everything. All devices are relatively new (think of the last model). I called the Apple Support, but their solution was to any wire. I asked if the 2nd AE can be configured statically, but they have quoted me their policy, which is not supported and took my info and never called back. I read the posts of the forum, but could not find any relevant information.

  Can someone tell me how I can do the 2nd AE connect only to the AE 1 (in the middle) so I can get faster speed for the game device wired to the 2nd AE? Your feedback is much appreciated.

  Kind regards

  B.

  When you try to extend using the wireless, there will be a loss of speed associated with the process.

  When the two Airport Express connect to Time Capsule, it will be more loss of speed because the 2 devices are connecting and extending.

  If the 2nd Airport Express does not connect to... Time Capsule and it connect instead to the 1st AirPort Express... then 2nd Terminal AirPort Express doesn't have to extend the network.  The 2nd Airport Express could be used for AirPlay, or to connect to a remote printer on the USB port, but it cannot 'expand' or 'repeat' in this case the signal of the wireless network.

  So you're wrong bing into thinking that the network is the extension more quickly if the 2nd Express connects to the 1st. Your network will behave at the faster speed even if you just turn off the 2nd Express.  It is not at all in any case extending the network, and you don't need.

  Here's another way to look at the same thing... using an illustration of the Apple support document for the extension of a network:

  

  IF... you can connect the 1st Terminal AirPort Express at the time using an Ethernet cable Capsule... then... the 2nd Airport Express would extend the signal from the first... but speed would be because you are trying to extend using the wireless.

  SO... connect the AirPort Express devices using Ethernet... then you will have maximum coverage at the highest speed... Since there is no loss of signal via the Ethernet cable.

• How can I make Outlook Express my default e-mail server by chance I went it to Windows Live

  I received an email from a friend this morning and when I went to open his attachment he came on Windows Live.  When I opened it, I was asked if I wanted to do Windows Live my default server by accident, I hit Yes but I want to use Outlook Express as my default server.  How can I change to Outlook Express?

  Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express.
   
  Making OE the default e-mail client:
  http://www.oehelp.com/oedef.aspx
   

• How to make photoshop Express 13 to new computer

  I bought Adobe Photoshop Express 13 a few months ago download it. Now I have to buy a new computer. How can I move PE13 to the new computer, or should I still buy it? I will not use the old computer more.

  You must install it on the new machine in the same way that you did initially using the same serial number.  Your license allows for installations enabled on both machines, so you can keep the original as a backup if you wish.  If this isn't the case, be sure to turn it off so that you always have an available activation if you find a need for a second facility.

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

• Airport Express as an Extender has stopped working

  How to debug an express Airport which ceased to operate as an Extender?

  Turning the router off 'main' AirPort and AirPort Express

  Compter count to ten, then turn on the 'main' AirPort router and run a full minute

  Temporarily move the Express for the same part or very close to the 'main' airport and it lights

  Assuming you have the green light, then move the Express to halfway between 'primary' airport and the area that needs more wireless coverage

  Report on your results.  If the Express is still not extending the signal, we need more information.  Things like...

  What operating system are you using on your computer?

  What version of 'main' router AirPort do you use?

  Which version of AirPort Express do you use?

• Whenever I have close Outlook Express application to compact messages. How to stop all the time to ask?

  Windows XP. IE8, OE6

  The file in the usage message, it is clear that you did not follow my instructions. You must follow every step of the process of compacting exactly as stated in my previous post, if you want to make sure the counter is reset. You can then close Outlook Express 99 times before you'll see the prompt to compact again. It is less the point of Bruce Hagen applies.

• Replace the comma with a period in a text layer expression

  Hello!

  I need to make a simple counter to 0 billion, so I found this expression that works perfectly:

  Start code

  startTime = 0; seconds

  endTime = 5; seconds

  beginCount = 0;

  endCount = 9700698977;

  hasCommas = true;

  function addCommas (s) {}

  If (s.length < = 3)

  return s;

  on the other

  Return s.substring (0, 3) + ', ' + addCommas (s.substring (3, s.length));

  }

  function reverse (s) {}

  newStr = "";

  for (i = s.length - 1; i > = 0; i--)

  newStr += s.charAt (i)

  return newStr;

  }

  Val = Math.round (linear (time, startTime, endTime, beginCount, endCount));

  If (hasCommas)

  reverse (addCommas (reverse (val + "")))

  on the other

  Val

  end of the code

  The problem is that I need to change the commas with pins to look like 9.700.698.977, someone knows how to do?

  Just change this line:

  Return s.substring (0, 3) + ', ' + addCommas (s.substring (3, s.length));

  to do this:

  Return s.substring (0, 3) + '. ' + addCommas (s.substring (3, s.length));

  Dan

• Airport Express as a bridge for cable internet and wifi

  Hello

  My first post and I hope you can help, because I was not able to get a clear answer to my question, but it's perhaps easier to write

  I have an airport extreme for wifi, it's in a piece of my house. Airport extreme, I have an ethernet cable to my living room on the other side of my house. The cable is for my TV. The walls are solid, and I have only weak wifi in my living room. Therefore, I would like to connect an airport express (WAN port) to the cable in the living room, offering a better wifi, and I want to enjoy the internet connection cable between the LAN port in my TV

  the new airport express 802.11n, do the trick?

  Thank you

  Kris

  Yes. You would like to configure the Express to be in a roaming network configuration with your extreme. This would make the Express Ethernet active ports to support your TV.

• Using a value Boolean true to increment a counter

  Hello world

  I would like to make a simple counter that waits just until a value Boolean true is passed and account 1, then wait until it happened again and goes up to 2 and so on. Just a single increment each time a real rose. I'm sure it's pretty simple, but I had no luck so far.

  Who does not resemble a need for a secondary loop.  You can add code to this loop to analyze the data.  If you do the calculations to determine a true, you already do the job.  Instead of going out a real, just increment a value of a shift register it.  Saves the hassle of sending one real constant for another loop for updating a shift register.  Do not create excess code just to have more code.

• How to stop outlook express does not send emails more because of an email earlier had a wrong address

  Sorry if this is an old topic but I can't find any info about it:

  Sending 6 or 7 emails via outlook express, if you have a bad email address none of the sent emails after will go that they all sit in the Outbox queue behind the bad email. is there any how to make outlook express send other emails and just let the bad email? It is very annoying because I don't get to see the real prospects and know its happened when people say that they did not receive the email

  Is the message with the wrong address still in the Outbox?

  It is a question that is more how your ISP handles these messages. Some will accept the message and send you a Mailer Daemon note that the message has been delivered. In this case, it left your Outbox.

  Other service providers Internet will not accept the message to all who let her in your Outbox and blocks all future messages. There is no setting in OE to get around the policy from your ISP.

  Does that help?

• How can I install and use outlook express as email scanned by default on windows xp?

  I scanned an article on Brother MFC-J270W and tried to send the article by e-mail. Blurb came "I want to make Outlook Express my dfault". I clicked Yes. Then an error message came up with error 0x800CCC0D # and I couldn't e-mail my digitized item. Help, please.

  You can not make OE your email client by default if you are not using OE. You can do the following and start using OE, but why don't you just save the scan to a Windows folder and then start a new message from Hotmail and fix it? Using OE with Hotmail is a chore, if you're not used to it.

  How to add your Hotmail e-mail account to Microsoft Outlook Express
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• How to make Windows 7 Home Basic to Home Premium or professional?

  Dear friends,

  I recently bought a sony vaio with windows 7 Home Basic 64-bit oem. now, I want to toupgradeto a 64-bit home premium or professional. I'm from the India. My concern is that if this clears all my existing programs as well as the oem sony care software that came with the laptop. Please advise I have win 7 ultimate to the office and find that quite lacking in several respects. Thanks for your suggestions. also I can take a snapshot of my pc and back up all data and custom program install another version of windows 7 for example, then the data recover all saved. is it possible. I have programs such as adobe photoshop etc. and other running office software.

  Kind regards

  Ashutosh

  No, you will need to do a clean install when going from Windows 7 Home Basic Edition to Windows 7 Home Premium or professional. You'll be able to make an Express of Windows 7 Edition upgrade Home Premium to Windows 7 professional well. What you need to do is save the drivers that came with the Sony Vaio, if you don't have the option to do this, go to the manufacturers website, download and save them. Make sure you have all program disks near reinstall your favorite programs. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP