Make ESXi appear as a server with a mac and several base10 IP

Similar Questions

• Photosmart 7280 - work with a mac and PC

  We have Photosmart 7280 home for use with a PC (mine) and a Mac (my partner).

  My partner was never able to operate wireless with his mac and did not have time to sit on the phone or online to make it work.  However, I installed it yesterday and got, it works on my PC (Dell Latitude C7280) with Vista Business wireless.  Everything was fine, until my partner needed to analyze something yesterday.  He plugged the USB as usual and scanned away successfully.  However, when I got then use again, the solution Center shows the printer as being disconnected.    I removed the usb cable, the printer stopped on and once again but nothing works.

  I rang the helpline yesterday and was in a queue for 1 hour 4 minutes before I finally gave up.

  How can I get the printer reconnected and how do I stop this happening again?

  Lucy

  PS - Note to HP - keep customers in a queue of 1 h 04 min with a message saying "we will soon connect you" is atrocious customer service.

  Is the printer lost connectivity with your wireless-network address of the printer's IP has changed since you installed the SW on your Dell.

  You use a wireless router - and what is it?

  Can you access the printer's internal web page by accessing its IP address? You can find the IP address of the printer by printing the Network Configuration Page.

  If you can access the web page of the printer, then unfortunately I think it's time to reinstall the SW. Once get you it working again, I would recommend setting the printer's IP address. On the C7280, you can do it from the front panel of the printer in the network menu.

  BTW - what type of problem do you have to get the SW installed on the Mac?

• Accounts iCloud duplicate not appearing in the Contacts on my Mac and I only have an iCloud account.

  Accounts iCloud duplicate not appearing in the Contacts on my Mac and I only have an iCloud account. That's why I duplicate contacts. I went though the routine was suggested to merge duplicates, but it never finds any merger of duplicates. This problem was supposedly degenerated to the genius of Apple about two weeks ago, but I have received no updates since. Any suggestions?

  What have you tried so far. Have you tried to turn the contacts of in your iCloud settings, have you tried signing and to iCloud.

• I just had a software problem with my Mac. and had to reload everything with Apple. Only one problem. Lightroom is gone. Apple said that the address has changed. How can I get my pictures back? Can anyone help?

  Hi all

  I just had a software problem with my mac and had to reinstall everything using Apple. One problem, lost lightroom 5. Apple said that the code of the address has changed. How to recover my photos or have I lost?

  At soon Pete J

  Hi Pete,.

  You can install Lightroom via this link:

  Download Photoshop Lightroom

  However, to get the rear changes you have previously done in Lightroom, you need to get the backup of your previous Lightroom Catalog.

  Store you the backup of your Lightroom catalog before recharging your Mac OS?

  Kind regards

  Claes

• I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and he said to me: not val

  I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.

  where will be the second serial number?

  Help me please.

  Thanks, Abe

  Hi,

  Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error

  Kind regards

  Sheena

• Server with a database and an installed network agent... Add a new database

  First of all, sorry for my English.
  I have a server with Oracle 10.2.0.4, where there was already an agent of the grid control and a database. Now, we have created a new database on the same server. What I do to make this new database is displayed in the grid control?
  
  Best regards
  Vitor Jr

  Did you do the following?

  agentca -d -c "hostname1,hostname2,hostname3"
  

  Change - read your bad output... exceed the correct host names. You may need to use the full host name IE hostname1.tpn.cliente.com as in your output... Try and see.

  Published by: Freddie Essex on April 24, 2013 16:56

• Using SQL Server with ADF BC and getting Houston - 29114 ADFContext aren't Setup error

  Hello... I work with ADF BC and my connection is with a MS SQL Server database.  I added the sqljdbc4.jar in my template project, and can't seem to connect with the DB and build an Entity/View/AppMod infrastructure.  However, once I deploy the application on the integrated WebLogic Server I get errors when ADF BC tries to connect.  I added a POJO supported data control and tried to debug but PPR reports an error when my key to call the code stripped of JDBC:

  Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-29000. Error messages settings are {0 = java.lang.NoClassDefFoundError, 1 = com/microsoft/sqlserver/jdbc/SQLServerException}

  ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #1 60096:Server

  Seems to me that the POT is not in the classpath on the WLS.  What is the problem? If Yes... How would have added that JAR, sqljdbc4.jar, the path of the WLS class.  I've done through the deployment of models, and he saw in the META-INF/lib directory that has been deployed.

  Thanks for any help!

  Do not apply the JDBC JAR (s) in the archives of application deployment. You must add the JAR to the classpath WLS JDBC (s). Change the commEnv.cmd/sh for this script:

  Using JDBC with WebLogic Server - 11g Release 1 (10.3.6) drivers

  Note that WLS is pre-configured with a number of brand WebLogic DataDirect JDBC drivers (including a SQLServer driver), so you can use it instead of adding a new driver if the DataDirect driver meets your needs:

  Using WebLogic brand DataDirect drivers - 11g Release 1 (10.3.6)

  WLS 10.3.5 documentation provides more detailed information:

  The MS SQL Server driver

  Dimitar

• Problem with the store and several questions.

  I tried all the methods listed below:

  Method 1: Make sure that User Account Control (UAC) is enabled.

  Press the Windows key and from the splash screen, type "UAC" and on the right, select settings.
  Select change user account control settings and check here.

  Method 2: Check the date & time zone is correct:

  Follow these steps to change the time.

  a. double-click the current time on the lower right of your screen.

  b. then click Change hour date, then click on the button to change time zone

  c. Select your time zone and the tick to automatically adjust clock for the time being, then press OK

  d. press on apply, then OK.

  Method 3: Run the network troubleshooting and check if you can connect to store.

  Follow the steps to run the network troubleshooter utility:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, tap network troubleshooting in the optionSearch .

  d. clickutility troubleshooting networkto run the troubleshooter.

  Method 4: If you use a proxy connection, then try to disable the proxy and then check if the problem persists.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on the Tools buttonand then click onInternet Options

  c. click on the Connections taband then clickLAN settings

  d. uncheck it Server Proxy use.

  e. click on apply then Ok to save the changes.

  Now, check if you can access store.

  Method 5: Cache reset Store.
  Follow the steps and check out them.
  (a) right click on the start screen
  (b) click on run
  Type c) in WSReset.exe
  (d) press enter
  (e) restart the computer and check.

  Method 6: analysis Run SFC
  (a) right click on the lower left corner of the screen and select 'Admin command prompt.
  (b) type following command, and then press ENTER: "sfc/scannow".

  Method 7: I suggest that you disable the antivirus installed on the computer.

  Method 8: CDevil Windows Firewall settings

   

  (a) Type in the Panel on the Start Page.

  (b) on the left side, click on Control Panel.

  (c) click on Windows Firewall.

  (d) in the left pane, click "allow an app or feature through Windows Firewall."

  (e) under the features and applications allowed, look for store.

  (f) make sure that you have a click in private or Public.

  (g) then see if you can open the Windows store.

  Not a SINGLE one of these methods have worked. When I go to my home screen and click on store, he told me 'we could not connect to the Bank. This could have happened due to a server problem or a network connection has expired. Please wait a few minutes and try again. "I did it on my network troubleshooting, all right, I am able to connect to everything, but I've NEVER been able to connect to the store. Not only can I not connect to the store to upgrade to 8.1 Windows, but I can't create restore points. Not only that, but the backlight on my keyboard, no matter which option to choose, is always on when I type, even if I say it stays off. In addition, with Windows 8, I was promised the "quick start" where he takes no time to start, it takes more to start my computer windows 8 as it did my 4 years updated to the windows computer 7. Also, I can't start in Safe Mode or the clean boot. Whenever I try to perform the clean boot by using the options in the window manager and the configuration tasks system, when the computer reboots, everyone who opens are reset to zero and it doesn't work. I can also perform an update of the system. I want to just upgrade to 8.1 windows, but I'm not without the WS and NONE of the methods I have found work. I'm about to say the hell with windows 8 and make a downgrade from the system to an OS that actually works. I had nothing else problems since I bought this computer with windows 8. I don't have time to deal with these questions. It is clear that appropriate testing procedures were followed before the release of Windows 8. Please help, I am very frustrated with all of this.

  I also tried before asking this question. I don't know what happened, or how he did it, but the store has started working when I was on other networks, he didn't always works at home well. I finally download and install windows 8.1 and it fixed the issue together.

• Make VMOTION on a different server with different, example HP and DELL

  A colleague asked me a strange question of VMOTION, you can go,

  You have HP DL380 G5 and a DELL Power edge 1620 (or anything) in a cluster as ESX host. Now if I want to use VMOTION between these two servers, should what precautions I take?

  Please let me know because I have never tried as we all HP inside the VC as ESX Server.

  Thank you

  Anky

  There is no vMotioning fast problem between different manufacturers of servers - Andre's notes it is critical CPU compatibility - so if Dell and HP servers have the same processor (or family) that vmotion will work

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I use Foxfire that my server with my Mac 'Mini' but you can not download the Foxfire current upgrade.

  Several months ago, I bought the Mac Mini desktop computer and use Foxfire as my server. I wonder constantly update my Foxfire, but am not allowed to connect to the Foxfire server even if I'm already connected. What is my solution?

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Windows/Windows Live Movie Maker no video black screen. but with the audio and subtitles...

  I made a movie in windows live Director and windows movie maker in windows live movie maker, he's playing very well and I've registered as a project and a movie (on my computer), but as soon as I opened in windows movie maker, windows MediaPlayer, youtube or anywhere else, half of the video goes to a black screen. I had all the audio and subtitles, ect for the first minutes of my film no photo or video. I tried to convert the file type, I tried to burn to a disc, then I just gave up and he made once again. still the same problem... Please help? :(* Le fichier EST àle format WMV et je l'ai ai copié et converti en autres formats et juste le même problème à nouveau... quelqu'un peut_il s'il vous PLAÎT m'aider?) its for a project, my friends and I are trying to do and we spent 5 weeks of filming and editing just to be confronted with a problem end:(, je serai vraiment reconnaissante à toute personne si ils peuvent m'aider à résoudre ce problème)

  Hello

  The question you have posted is related to Windows live and will be well suited in the Windows live forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Windows Update never appears to stop running with windows 7 and sp1

  Recently, I did a clean install of windows 7.  As I have updated definitions for Defender, Windows update ran and introduced 3 update. But as I have a copy of the SP1 and IE11 when I installed them all first I used these. After that, I got an update from the update of Windows 7.6.7600.320 agen. Since then, windows update runs indefinitely even up to 3 hours. I even tried this will my laptop (1570 led) connected to my router.

  Research in the windowsupdate log I saw different types of message and even if log files ends after about 10 minutes, the screen update always seems to be running, even up to 2 hours and beyond.

  I don't see any obvious error in windowsupdate.log. Y at - it someone who can suggest what's going wrong with my update. Also, I tried to run the windows update troubleshooting, but that's always hard after 30 minutes.

  THX

  You could look into this,

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Several instance to the same server with same ORACLE_HOME and same SID

  Hello gurus, reduce costs my company looks to reduce the backup servers and the databases consolidade waiting on big 2 or 3 servers to reduce oracle licenses.
  It is that I have about 30 cases with SID same how to configure it to run as 10 instances with the same SID, ORACLE_HOME in the same machine? is this possible?
  
  will run oracle on unix HP - UX 11r2
  
  BR
  
  TI

  Right. Each database will have own SID. With multiply tnsnames.ora and listener.ora all have entries for each standby.

  If the folder structure is different from primary then the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameters are used to convert to the new locations.
  These two taking input in two, the front of the location and the location after.

  Example:

  DB_FILE_NAME_CONVERT=('/u01/app/oracle/oradata/RECOVER2', '/u01/app/oracle/oradata/RECLONE','/u01/oradata/RECOVER2','/u01/oradata/RECLONE')
  LOG_FILE_NAME_CONVERT=('/u01/app/oracle/flash_recovery_area/RECOVER2', '/u01/app/oracle/flash_recovery_area/RECLONE')
  

  Standby for each primary SID can be all that you need. The DB_NAME parameter would be the same on both, but DB_UNIQUE_NAME would be different.

  Who is?

  So, if I have two PRIMARY and standby database, Eve will have its own password, its own file INIT file to its own directory structure (but it could be the same).

  Best regards

  mseberg

• VCB server with both FC and iSCSI connections

  Hello.

  Anyone know if a VCB implementation that has the FC and iSCSI LUN presented to the proxy server is possible/supported?  I see no technical reason that it wouldn't work, but I'm trying to understand whether or not this is a supported configuration.

  Thank you!

  I don't see why that would be a question of a standpoing of features, but if you didn't mind the performance hit you just the business day following mode of transport and not worry present LUNS.   I guess that maybe in the same way hotadd would work as well.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Problem with RESTful services and several optional parameters

  Hello

  Apex 4.2.5 I created following RESTful services:

  / test/multiplepar / {p1}

  / test/multiplepar / {p1} / {p2}

  / test/multiplepar / {p1} / {p2} / {p3}

  Practitioners will make has that {p2} and {p3} are supposed to be optional parameters, in a way 'cascading '.

  The underlying queries are respectively:

  Select: p1 double p1

  Select: p1 p1: p2 p2 double

  Select: p1 p1: p2 p2,: p3 p3 of the double

  However when I run:

  http://Server/Apex/WS/rest/test/multiplepar/1/2/3

  I get the result below...

  {

  "items":]

  {

  P1: "1/2/3"

  }

  ]

  }

  He takes everything as {p1} instead of divide among the 3 parameters.

  I'm sure that it is valid and I saw him work before... (in this same environment)

  Any ideas?

  Thank you

  Luis

  Nevermind, I found out that the 'priority' field must be set accordingly in the resource model.