Make in as3 = high priority tasks Manager?

Similar Questions

• Utilization ratio of page showing very high in Task Manager and computer file crashes

  Original title: the utilization ratio file page showing very high in the Task Manager and the system is to be hanged, please help!

  Hello

  as I mentioned in the title line that we our office gives problem that it begin to become hunged and at this time, when I open the Task Manager to check the status of performance using Page file shows very high up to 1.5 GB.

  Please suggest!

  Thank you

  Brahmaprakash Mishra

  If the swap file itself grows in fact you may suspect a leak memory by an application, it is called a leak 'Paged', usually, notice increased use of pagefile with an increasing slowness of the machine.  As the demand for 'leaks' or consumes more memory Windows pages pages of the RAM in the swap file, where the name, 'Paged' leaking, leaks memory in the paging file.

  The Task Manager is not a very good job of giving you the 'real' swap file usage, to get use accurate, you can analyze the file with the corresponding Perfmon counter or you
  can use PageFileMon from Doug Knox utility: http://www.dougknox.com/xp/utils/xp_pagefilemon.htm

  Open your task manager and click on the view menu and click Select columns...  Put a check mark on the columns paged and Thread Count.  Keep an eye on these columns over a period of time, showing a constantly growing number likely suspicious process Thread.

  You can monitor these counters with Perfmon, that might be useful:
  Using performance monitor to identify a pool leak

  John

• is it possible to set the level of priority permanently running in the Task Manager?

  Hello!

  1. My question is anyway to change the level of priority at all times by a program running in the Task Manager?
  • For example; I am using a software called xpadder that is for players for the games which are rather old and do not support the for windows xbox controller so I want to change the priority level of this software in the Task Manager, as I don't have to change the priority level from the top on normal or high normal etc whenever I run...

  So a little help would be really grateful :)

  Windows does not support this setting, sorry.

• Cannot change the priority of game in the Task Manager

  Original title: definition of priority in the Task Manager

  I run on windows 8 and I play the game League of Legends, I recently had a few FPS problems and tried to find solutions online, one of them suggested me to run the application on the highest priority. However, when I tried to change the priority of normal to another, priority does not change. No pop no ups, no errors. I clicked on "change priority" when they gave me a warning, but after that I checked again and it has not changed.

  Jerrold salvation,

  1. are you able to change the priority of other programs?

  2 are logged as administrator?

  Please log on as an administrator and then try to change the priority.

  If you are facing problems FPS when you play the game make sure you you have updated Java and the graphics card on the computer.  FPS depends on the specification of the computer, not just the game.

  Make sure that other programs are closed during execution of Minecraft and check if the FPS drops.

  
  Update the latest version of Java.

  http://www.Java.com/en/download/help/update_runtime_settings.XML Updated the graphics to the Web site of the manufacturer driver. See the article.

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this helps. If you have any other questions, we would be happy to help you.

• Impossible to change the priority of the process in the Task Manager

  Ive recently installed x 86 windows 7 RC1 and found that when running of 2 copies of the world of warcraft (dual-boxing) + ventrilo (+ other programs scattered... Vuze / MSN etc.) that the two windows in world of warcraft suffer massively in terms of frequency of frames and responsiveness during the exchange between the windows. Ive also noticed that the system does not seem to allow any time processor, which inturn hurt speech to wind... becoming lag ventrilo and shredded when send all voice data. Ive tried to allocate more time processor for programs, but windows gives me the error "this operation could not be completed, access denied. This did not happen under Beta to my knowledge. I have not tested in safe mode...

  Now, I understand the security features of the system and believe that I have all the correct Administrator security privileges, but im still getting this error, even if I run the programs as an administrator, they still suffer small amounts of time processor.

  Ive got a system strong enough, so it's not as if there are limited resources - this has me boggled.

  Intel E8400 @ 3 .00GHz
  Card mother Gigabyte EP45 DS4P-
  4 GB DDR2
  2 x Crossfire 4670

  The drivers are all the
  Virus scanner is the only program running outside those mentioned.

  Hello, ApolloFury

  I'm happy to offer a few suggestions, but you will have to go on Support of Windows 7 forums on the following link for assistance troubleshooting: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  After you open the Task Manager, click on Show processes from all users to ensure that it is run as an administrator. To divide the load, set each instance in its own kernel by click right-click on the process, Set Affinity and make sure only one heart is selected. Select the other core for the second instance. If you have a second hard drive, connecting it the second instance the second hard drive should also increase performance.

  Lower your settings at least in the game.

  You can also try to choose a basic theme to disable the Aero interface.

  If your antivirus scanning on access to files, it can cause too much additional slowdown with largefiles.

  I hope this helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 10.1.7 Adobe will not close in the Task Manager when you exit the program. High CPU

  Hello

  10.1.7 updated and I noticed that when you close the program, an instance of acrobat remains open in the Task Manager with the use of high CPU 50% +. Close any, unless you complete the task. If you open adobe still a new instance opens again consume more cpu and paralyzes the machine with high CPU. It's on computer 64-bit win 8. The work of previous 10.1.6 liberation for a while on the same machine without any problems.

  Thanks in advance

  How to restore for me

  1.

  Uninstall Acrobat X

  2.

  Used my initial installationfile for AcrobatX 10.0.0

  3.

  Downloaded for ftp://ftp.adobe.com/pub/adobe/acrobat/win/10.x/ 10.1.5 update

  List of compatible updates can be found here. http://helpx.Adobe.com/Acrobat/release-note/release-notes-Acrobat-Reader.html

• xfupdvpz.exe * 32 sub task manager takes high CPU usage

  My task manager has several elements of the line following' xfupdvpz.exe * 32 and says her for Google crome I uninstalled thinking that would help.

  It takes all the CPU usage and I wondered why its there and, more important, how to get rid of.

  HS

  There is no information from Google on this so I suspect malware.  You can get rid of it by running a malwarebytes scan

  Please download the free version of Malwarebytes.

  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• CPU at 100% with the Task Manager does not display what makes

  I have a new computer, less than 2 months and it came with Windows 7. Last week, my computer went from the status fast trolling, does not without apparent cause. I'm not a computer expert, but I ran that several malware and virus scan does not. The Task Manager shows my CPU usage is at 100% but it only shows nothing running top 10 to 15%.

  I have an Acer Aspire 5517

  with and Athlolan processor TF-20

  3 GB of memory system 64-bit

  There are a variety of similar positions on the Internet that refer to this type of behavior, but not one that seems to be a guaranteed solution. A few success report by disabling the Windows Media Player Network Sharing Service, while others reduce the media files in folders that are monitored by WMP, etc..  You have a lot of media files?

• No start page, Google rises and there is no way out without using the Task Manager.

  I used to get the Google search engine at the start of Firefox, with bookmarks bar in side bars and tool at the top. Now, all I get is a Google search page, with a few buttons on the top like images, etc. There is no way to close the program without using the Task Manager. I downloaded the latest version of Firefox and installed, but the problem has not disappeared. Operating system is Windows XP Professional

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  It is possible that the screen is too wide or too high and bars scrolling down.

  • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
  • Open the system menu of the window of Firefox via Alt + space and see if you can move and resize the window (use the arrows on the keyboard).

  If it works, then first close all other open windows of Firefox and then close Firefox via "file > exit/Quit" to save the setting.

  If the above didn't help then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Why are there no end process in the Task Manager tab.

  Why are there no end tab process in the Task Manager because it usta be a on windows xp, that makes it eaiser to end a game if you do not want it to start. In addition, some games when you exit out of them sometimes play on words to say (on steam) is currently unavailable. That when I try to log out of steam to get the game to work again, he says "game works must end game before disconnection which is the process you need to put end to which you can't because there is no process tab.

  Hi dontknopass,
  
  a. what game you try to play?
  b. did you a software or hardware changes recently?
  c. normally, you should get a process in the Task Manager tab, end process tab is located at the bottom of the Task Manager window.
  
  Method 1.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42
   
  Method 2.
  Let us see if we can get into safe mode, we can perform a clean boot for troubleshooting.
  Please check if you are facing the same question when working in safe mode.
  Step 1 Mode safe
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2 clean boot
  If you have the tab process end in safe mode you will need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the Task Manager won't start don't no error "the application could not initialize properly (0xc0000006.

  I've heard fans speed medium speed and high when I don't do anything that would require heavy resources. I tried the two Ctrl-alt-delete and right-click in the taskbar, and it fails to start. "The application could not initialize properly (0xc0000006). Click OK to close the application. "I click OK and it pops up again and then I click OK again and it goes.

  I ran AVG and Spybot in safe mode with network but nothing detected... and you erased my memory of page file also.
  It is simply damaged or make me a bug/virus.
  HP D220 desktop model

  Ok. What I wanted to say, this is so that YOU can see the file, you must be able to view hidden and system files. Windows will however see the file any if YOU can see it or not.

  In autoruns, in my opinion, you have not clicked on 'options', then 'Filter Options '.
  Make sure that all check boxes are cleared in 'Filter Options '.

  Tomorrow, I would like for you to delete infected tasks Manager by HP. And copy the Dell2 for HP-infected Task Manager. Just in case the task manager has been infected and start actually malware.

  So, tomorrow,

  -Alex

• Task Manager Win7 showing wrong memory values in the process bar

  I've been running Windows 7 64 bit Home Premium for quite some time now (2 years or more) and I have not encountered any serious problems. But recently my task manager started showing some strange values for all processes in the list. She says that explorer.exe is using a maximum of 65 k, which is the highest value compared to others except for firefox, which rises to 130 kb. I searched all kinds of forums and couldn't find answers. It is not a serious problem, but it makes it very difficult to know when a game or a program uses to much memory.

  I don't know exactly what card to set up here. But here are some of the most important, that if all goes well, it is not my hardware.

  OS: Microsoft Windows 7 Home Premium (6.1.7601 SP1 Build 7601)
  Processor: Intel Core i7 - 2600 k CPU @ 3.40 GHz
  RAM: 8 GB of DDR3 memory (I don't remember the exact manufacturer)

  I hope someone can help me
  -Rasmus.

  According the information that you have provided, I don't see anything unusual.

  My explorer.exe and IE9 using the same amount of memory (private beach).

  Edit: 25/10/2013 - after reviewing your original question, I realize, my answer was incorrect.

  The values must be higher.  See the last post by Emil Prager.

  I apologize for my control.

• After the update 42, partial load in memory (Task Manager), but the software antivirus keeps thread bound to perform but only loads 2nd & subsequent.

  Manager tasks shows Firefox loaded as a service, but a of threads waiting to complete. There is no application shown in the Task Manager (which seems reasonable that Firefox has not loaded).
  There is no error message. The 'circle of rotation of microsoft"is going for a few seconds, then disappears as if the schedule.
  It happens after 2nd & subsequent charges after reboot. Firefox seems to work the first time after reboot. It happened only after upgrade to 42. Clean installation makes no difference. Chrome works OK
  Worked well up until the 42 update. Tried to do a clean install with the box to inform Mozilla erased.
  Maybe Firefox started using a port that is blocked by the antivirus? I don't get no logging for the virus scanner showing what it to be blocked. A comprehensive analysis reveals nothing.
  Operating system is Windows 10 (64-bit)

  Abandoned trying to actually find what is actually happening. Changed software virus scanner.
  I think (and this is just a guess) is that to integrate with windows update update 42 change the output method to the telemetry file the antivirus does not. It is perhaps that the antivirus cannot manage that file or property, but it does not record the fact, a failure of the antivirus.
  There is a hint of doubt in my mind when an upgrade causes a system that works to fail in a non traceable method.

• 29 Firefox fails to come out properly and continues to run in the Task Manager.

  It is a continuation of a thread found here:
  https://support.mozilla.org/en-US/questions/997448 by Compumind.

  I pointed out that I had the same experience, especially at the opening of the email links in Thunderbird. I reported also that forced me to go back to 28 FF.

  Moses responded by top wire and suggested:
  (1) download a fresh installer of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) the release of Firefox.

  (3) rename the folder

  C:\Program Files (x 86) \Mozilla Firefox

  TO

  C:\Program Files (x 86) \OldFirefox

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  I followed these instructions carefully but no joy. When installing 29 FF, not only refused to leave (using "exit") and continue to run in the Task Manager up until I killed him after the opening of links in Thunderbird, but I find that he refused to come out after a simple navigation and links.

  Moses had asked that I didn't answer in the original thread, so I re-post here.

  In my view, that there is a serious bug. With Firefox 28... no problem don't except a minor that I have indicated here:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1002089

  Yet once I am obliged to 28 FF, although I miss the nice interface and security patches, I need to have a browser that works properly. My wife never even saw the Manager of the tasks before so that's the problem.

  In addition, "guesses" made with this post, the only other thing usual outside that I do, is to have a security policy about cookies (accept by default... I make exceptions for cookies I want to keep and have several that are "allow only for the session.") I also FF the value delete history of navigation at the exit, but that takes a fraction of a second.

  I look forward to when this matter can be addressed successfully and I am able to use 29 FF (and out properly... I can't wait for my wife to follow all of these instructions and it often close manually in the Manager of tasks... or what I want to do this.)

  Good luck for all Mozilla projects. Having installed 29 FF twice and then back return 28 twice, I'll wait and see how this plays out. Please don't send me the standard "start in safe mode", 'restart with disabled modules', 'reset Firefox' stuff (the last time that completely destroyed my browser). I don't think that is what is happening.

  Moses added that there is a problem with the e-mail notifications passing by, so take your time, friends.

  I think now (temporarily) this bug or problem has its roots in "history leaving Compensation."

  I made the leap after a few game with 29 PortableFirefox and reading the blog post linked here:

  [https://support.mozilla.org/en-US/que.../997918#answer-566755]

  .. .and installed 29 FF on my previous FF28 on my box. I unchecked the "clear history on exit" which was only to delete my history, not cookies or anything else, cor - el. My setting should not accept cookies unless I make an exception. Until the FF developers find a way to do this is functional, I'll just have to manually delete the history.

  Furthermore, John99, you want to maybe privacy.sanitize.sanitizeOnShutdown set to 'False', not 'true' If you want to stop the automatic deletion of the history at the exit (attempt).

  I've been running for about 6 hours. without experiencing the bug 'suspended '. So, I can live with that for now until this bug is fixed. It should be fixed... browsers are supposed to be able to do things like that.

  On the other hand, I could find things go wrong... but so far I'm not having a problem.

  I for several hours and will let you know later if things change.

  Kind regards

  Axis

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.