Make trouble

Similar Questions

• Re: Driver for Toshiba system do not run after instalation

  Toshiba system driver not running after instalation in 64-bit windows 8

  Please post more information. Model of laptop, OS, what you're doing and which driver exactly make trouble.

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• Satellite A60-217 memory upgrade

  Hi, I have a Satellite A60-217 (Intel Pentium IV HT 532, 3.06 GHz), and I want to upgrade the memory by adding a 512 MB of currently installed memory (256 MB with 64 MB shared memory for video card).

  I tried to install a S3 + PC2700 DDR SODIMM 512 MB module, but the system does not boot to the top: it emits a long whistle blow and then stops automatically. If I remove the module, the system starts properly.

  The manual indicates the speed of the memory supported is only PC2100. Is this true? The module is maybe defective?

  Thank you

  Hello Stefano

  Of course, the added module is not compatible and makes trouble. I found the info, this compatible module PC2700 512 MB (PA3312U - 1 M 51).

  Google a bit and you will find lots of information on the module with the PA3312U - 1 M 51 part number.

  Good bye

• Qosmio G30-137 - video card problem - the bug of vertical lines

  Hi members,

  Today my Qosmio G30-137 started to make trouble showing vertical lines that look like this:

  ''''' ''''''' '''''' '''''''
  '''' ''''''' '''''' '''''''

  After having used the product Windows disk recovery could not start early and came up with a blue screen with the error code:

  + failure of page in the nonpaged area STOP 0 x 00000050 (0xC09C3044, 0x00000000, 0X804DA90AA, 0 X 000000002) +.

  Basically, this indicates that the RAM - memory Cache L2 or preserved is dead. But I also learned that the graphics card can be smoked.

  After the blue screen, you will not get the system to normal operation, no matter what you try.

  I strongly advise to check if your Qosmio is under warranty and see your reseller for Exchange. Fortunately I bought mine 2006/06/06 so its still under warranty (even if only a left view days).

  Additional information: another Member of this forum has had a similar problem and noted that the entire motherboard must be changed causing costs of USD 700.00 and more!

  I will let you know what I found myself with.

  BRgds
  The Q

  Unfortunately, this sounds like a serious problem of material as other members suggested, the GPU (graphics card) may be defective and therefore replacement is necessary.

  The point is that the GPU is soldered on the motherboard and it of not possible to remove the graphics chip of the card. In most cases, the entire motherboard must be replaced to solve graphic problems.

  In my opinion, you should contact your ASP as soon as possible.
  Technicians should be able to help you to explain the situation and to issue and ask for later handling.

  Good luck buddy

• Satellite A300D - problem with installing Win7

  Hello
  A few days ago, my HARD drive was broken down. I bought a new one and tried to install Win7 Ultimate x 64 (7600) on it. But I had a hard time:
  -L'installation interrupts on the stage of "Complete installation" and the laptop turns off when the second restart proceed, before the stage when it is necessary to fill in some fields, for example the name of the computer, etc.
  So a question arises: what happened and what is required for a successful installation?

  Satellite A300D is the old model of laptop, and you can order is original Vista recovery DVD only.
  I installed Win7 32 bit on A300/A300D successfully and think that 64-bit installation should not make trouble.

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• Why an asynchronous call would lead to "the VI is not executable. The full development version... »

  I built a labview moderately complex program to connect with a new parser that I build.  To briefly describe the application, the main VI is a user interface which, in an initialization step, asynchronously calls a dozen other screws each called VI is a state machine that handles communication with a component specific for my parser, whether heat controllers, regulators debit, NI DAQmx channels, a SQL database, etc..  I use the VFG and/or EI to communicate information between the main VI and each component. The system works well when it passes through NI Labview 2012 SP1 (full development Version).  I build the project successfully, but when I run the construction (on the same development machine), I encounter the "the VI is not executable.  The full development of LabVIEW version is needed to correct errors"message.

  My first troubleshooting step that was supposed to isolate the problem.  I removed all the asynchronous calls, rebuilt and the program works without errors (granted, no State machines that handle I/O bundles are running). This gave me the impression that my UI screws are not the problem.

  The next step that I took was to create a test project with a simplified user interface to call asynchronously, and control a single component.  The first part, I tried to control a heating unit, and it works perfectly.  I have build it and run without errors or problems.

  Thinking that the component should not be a problem, I add the async call for this component in my main VI, to test it.  This works well in the built environment of Labview development, without errors, but alas, I get the same message as the "VI is not executable' when I try to run the build.

  I am at a loss on how to make trouble, or it could be the cause of the problem.  Why an asynchronous call to the VI even break the construction of an executable project, but don't cause problems in an executable of side projects?

  
  

• Why can I not play pogo games on my laptop

  My pogo games will not play on my laptop. can someone help me

  What kind of error do you get?  Pogo problems have to do with the firewall that you are behind.  Pogo communicates with servers through your network, and if your firewall rules are too restrictive will not work for you.  You can contact the customer service of Pogo for more help with this problem, like all firewall and security software is different, it would be difficult for me to make trouble for you.

• Orange AUX_PWR is turned on

  Recently, I completely lost wifi connection on my XPS 8700. The computer cannot detect any router. I noticed that the Realtek wireless card was missing in Device Manager. Fortunately, the Dell wireless adapter was still available. After you activate this card, reworked wifi connection. However, during this troubleshooting, I found that the aux_pwr light turned on even if I shut down the computer.

  My questions are:

  1. the Realtek wireless adaptor is dead?

  2. why the aux_pwr light lights - led amber solid? Is it related to the question of Realtek wireless network card or indicate other issues in my computer?

  3. can I turn off the aux_pwr light or how to make trouble? I do not think that the aux_pwr light on is normal.

  So far, the computer works fine. Admittedly, I have not tested all the features.

  Any help is appreciated!

  

• The ISR G2 GET VPN throughput

  I looked up a document detailing the flow of VPN to GET on the ISR G2 routers. I only found a general IPSec flow for them, and I couldn't find a document GET VPN for old ISR routers.

  Can someone help me find this information?

  Kind regards

  Xavier

  Xavier,

  It is always better to ping your Cisco system engineer for this information.

  I don't think we have an external update (module ISM came out considering in particular).

  As employees of Cisco, we cannot provide internal data and the majority of the results of the tests are labeled "confidential Cisco.

  Provide you those could make trouble for us :-)

  Marcin

• I created 'language bar' for 5 languages. All 4 works well, but "Korean" does not work when selected. My system is windows 7 ultimate.

  I use a few different languages in communication with others.

  So I implemented 'language bar' on my new windows 7, just like I used to do it on windows xp.
  I followed through all the suggestions to make trouble, but it still does not work.
  "Korean" does not work when selected.  He types English instead of Korean.
  Maybe "Korean" was not installed.
  Is it possible to make my language bar works correctly?

  Hi John Kim_775,.

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Hell How can I unsubscribe to this criminal enterprise, I've just been forced in an inner loop, there is not why it is possible to contact support customers to cancel. So it is inherently difficult to do is criminal and you're going to lose a hell of a lo

  How in the hell cloud adobe not unsubscribe to this criminal enterprise, I've just been forced in an inner loop, there is not why it is possible to contact support customers to cancel. To make trouble by nature to do is criminal!, and you'll lose a hell of a lot of customer loyalty by being total stooges on this subject. Please is their some sort of link? This experience has really ticked me, I WILL USE YEAR ADOBE PRODUCT MORE EVER!

  How to cancel a subscription cloud creative

  You will need to contact Adobe technical support directly, but you will have to wait for the long weekend to spend.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• I have trouble deleting a project to create Clip... keep it coming back (sync).  How can I make sure that it is void of all devices and permanently?

  I have trouble deleting a project to create Clip... keep it coming back (sync).  How can I make sure that it is void of all devices and permanently?  So much space being taken up on my iPad... there at - it a why to manage what are sync'd projects and ignore others?

  Hi Bill,

  Sorry, you have trouble. Here's a suggestion:

  1. launch Premiere Clip on a device and make sure it is not open on other devices.

  2. on the device, as it is opened, remove projects that are no longer needed.

  3. allow the synchronization of the application (leave opens and is not the bottom) so that projects are marked as being deleted on the service. A circle of rotation icon appears in the lower left corner of your device while synchronization is in progress.

  4. Uninstalling the app on other devices, then re - install and login to leave remaining projects sync.

  Please let us know if this solves your problem, or if you need more help.

  Thank you

  Bronwyn

• Make the computer unusable for msconfig. Beginner trying to trouble shoot start.

  computer would start the start to the top and woul would some programs stop responding? then I tried troubleshooting of systems no, I can't evenconnect to internet. When I proceed with help & support I get this. Windows cannot respond because server system does not work. How do I start systems server running again? help please.

  computer would start the start to the top and woul would some programs stop responding? then I tried troubleshooting of systems no, I can't evenconnect to internet. When I proceed with help & support I get this. Windows cannot respond because server system does not work. How do I start systems server running again? help please.

  Your post is a bit inconsistent.

  If, as the subject says, you did something with msconfig that makes your "unusable" computer, rerun msconfig, check the box 'Normal Startup' and restart.

  If you did something other than (or in addition to using msconfig), please explain what you were doing.  Also explain what was your original problem.

  Please indicate the message any errors that you see, not only something like "windows cannot respond because server system does not work."