make unmodifiable by the element

Similar Questions

• Apex 4.0: In the form of table: how to make reference to the elements?

  Hello
  I have a tabular layout with a certain query. A column in the query (say comm, is not displayed. This column is required in the table
  
  When a new row is added in the form of tables, I want to add a (complex) value for this column hidden by default.
  
  I want to add a process (before submitting) to the page.
  How can I make reference to this particular point?
  
  
  : P23_COMM: =...
  
  does not work. It is a column in the query, not a page element.
  
  Any help appreciated.
  Sincere friendships Erik

  Loop over the hidden PK table, identification of the new line (by finding with PK NULL table th eone) and assign the hidden item corresponding

  Assumung 01 is the primary key column table (use firebug to check this) and 05 is the hidden field

  BEGIN
    FOR i IN 1..APEX_APPLICATION.G_F01.COUNT
    LOOP
       --Identify new rows
        IF ( APEX_APPLICATION.G_F01(i) IS NULL ) THEN
            APEX_APPLICATION.G_F05(i)  := 
        END IF;
    END LOOP;
  END;
  

• Make request to the elements defined in the inventory iprocurement

  Dear Experts,
  
  Can do us requests for these items that are defined only in the inventory of iprocurement module. If Yes, then how can we add items in carts.
  
  Thanking in advance

  Hello

  Please find below the same information.

  What are the steps to activate the items presented in the catalogue of supply? [751324.1 ID]

  Kind regards
  AKS

• How to make transparent cluster keeping only the elements inside the visible cluster?

  Hello

  Can anyone suggest me how to make transparent cluster keeping only the elements inside the cluster visible in the front panel.

  Thanks in advance,

  Vinciane

  As I said, use the space bar for what is paint. This works. Trust me.

  PS You cannot link to pictures stored on your hard drive. We don't see them. You must add them as attachments and then submit the post they get uploaded to the servers of NOR.

• Every time I make an external edition with 12 LR6 elements it tells me I need Camera Raw 9, but the elements will not update to Camera Raw 8.5. How to stop this message pop up?

  Can I stop this pop up does not happen? Or is there a work-around that will get Camera Raw 9 install on 12 items?

  spinner498 wrote:

  Here, I'm a bit confused. The message, in LR long before the opening of the elements. I don't see this as a question of items other than the items will not be upgraded past 8.5. It's a LR definition probably

  It is actually both a Lightroom and Photoshop Elements problem. The version of Lightroom you are using search Camera Raw 9 to make sure that the image is properly translated when it transfers from Lightroom to Photoshop Elements. Lightroom can see that you have only the version of camera raw. Lightroom notifies you as well as the transition between Lightroom and elements might not transfer all adjustments using Lightroom. So, it should give a free choice either way you or edit a copy with Lightroom adjustments. The second option is the one you should choose. Then Lightroom will create a TIF or PSD file (depending on your external editing options) and send this file to the elements. The only way you can completely solve this problem is to have a version of Photoshop Elements, which is fairly new to use the same version of camera raw that Lightroom is looking for. If you don't want to upgrade your version of elements, then you should choose the option to edit a copy with Lightroom adjustments.

  Camera Raw is used when you transfer the file from Lightroom to elements to translate the raw settings and create an image that can be edited in the elements. By itself without camera raw, Photoshop Elements cannot change raw images. The image must be converted before its opening in Photoshop Elements.

• How can I make the elements folded and accessible than if you select Yes and no if no?

  Aware, as I am working on a form where you have a Yes and no other choice if you choose Yes, then you must select a level of risk low, med or high. I wish that the elements can only be selected if this option is enabled.

  Help, please!

  Mustbeluck

  I have attached a sample that changes state (property access) in the form of boxes 'ReadOnly' to 'Open' (selectable) if the "Yes" box is selected.  The script also clears the boxes if the box "no" is selected.

  The script is the event of 'Change' of the radio button group.

  Concerning

  Steve

• Page Forward and Reverse buttons do not work and are "grayed out" after upgrading to, as it is the elements of main Menu like file-Edit-view etc...

  After the upgrade to Firefox 3.6.12 features appear to be intact. Then, after a few days he lost the ability "page forward" or "back" and are "grayed out". In addition, the elements of main menu like File, Edit, View, history, Favorites, tools, and assistance are also grayed out and non-functional.

  In addition, the "search engine" does not search, search the Web should be made since then in the URL window instead, for some reason any crazy. If the URL window is empty when I enter a search in the search window, the following text appears in the URL window, "bookmarks and search history", which makes no sense.

  In the past, I've noticed similar complaints in this Forum, but I have not seen any resolution posted these questions. Is there a solution?

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See basic troubleshooting: a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins»

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Access to the elements of an array passed as object reference

  Hi all!

  I am quite new to TestStand and therefore, my question might be simple enough but I was not able to find the solution by looking at previous posts.

  I have a sequence that passes a custom array (of data type) to another to make basic on the table stuff (reverse the order of the elements, for example).

  I want to move to the sequence called an object table reference

  The problem is that I am not able to read the array element inside the sequence called using the object reference.

  I found the way get the number of items, but I'm not able to access the item

  In addition, the TestStand GUI is able to let me see the array pointed to by the object reference that is passed within the known sequence, so it is possible to access... but how?

  I want to do operations on the object reference passed within a 'No return' TestStand if possible.

  Thank you very much.

  Andrea

  In other words:

  How do I access the field 'temperatureTag' item number '0' from the object variable reference referenceToClone?

  Locals.referenceToClone [0] .temperatureTag does not work...

  

  I don't know what is the recommended method to solve your problem. When you try to few alternatives, I was able to get the value required by the following expression (tested with TestStand 2014):

  Locals.referenceToClone.GetPropertyObject("[0]",_0).temperatureTag

  Try and tell me if it works for you.

  Use this workaround with caution.

  -Shashidhar

• How to replace (assign) a part of the elements of an array in TestStand?

  Hello

  I would like to replace or assign values to the elements of an array.

  For example, I have a local variable with 6 elements, Locals.A = {1, 2, 3, 4, 5, 6},

  and I would do it is {1, 2, 13, 14, 5, 6}.

  Accordingly, I add an expression and write "Locals.A [2.3] = {13: 14}", but it failed.

  Is it possible to replace a part of a painting?

  My real question is I want to pass parameters to a sequence to a local variable of the MainSequence, like the picture as an attachment.

  I hope that I can assign the parameter (table 5 elements) for the range of 5th to 9th item of the local Variable.

  Could someone give me any suggestions? Thank you very much!

  

  (1) I meant move the entire table and in the subsequence programmatically update only a subset of the items.

  For 1 or 2, you'd have to write a loop as interates on and updates the items that you are interested in. There is no simple syntax that will do what you want. You can use a loop but, rather than make a statement of entitlement for each item.

  -Doug

• Periodic table of the elements

  I created a table periodic elements, using a bunch of Boolean switches, color-coded and labeled as indicated.  Does anyone have any suggestions as to the best way to create a list of all the selected items?

  The PC application uses a touch screen.  The general idea is below.

  1 analyst clicks all the elements in the sample.  (I want to make sure the table only lists an item once, regardless if they click a button several times - I can make sure the button is disabled once they tap it once)

  2. in a second tab, there will be a list of all the selected items on the 1st tab.  There will be a keyboard here, so that the analyst may enter the percentage weight for each element in the sample.

  I've attached screenshots of what I have so far (not much).  You are looking for just a few general ideas - don't mean someone do my job...

  
  

• Output below the element found

  I just started a few weeks ago labview. I'm doing a vi when I enter a number and he would send me a different number which I have previously saved in an excel worksheet.

  So, I used reading worksheet function to read my saved spreadsheet and make a table. And I have connected on a 1 d Array search and the first line of my table to research D 1 table function. So, I know that it would index the search item. But what I'm looking actually at the exit is the element in the next cell. (same row, right-hand column).  Do you know the guy of some sort that I could do?

  Thank you very much in advance!

  Yes, it's the 'Index Array' function.

• Add the element of matrix / 2d array

  Hello forum users.

  I'm working on an application that uses a mobile robot to draw area.

  To do this, I have 16 records sonar once per second. These sonar readings give a coordinate X and Y hence is an obstacle.

  Now what I want to do, is make a matrix / 2d table I qualify by 501 501 k size and have all the elements of this matrix be zero. For each of my readings of sonar, I want to add 1 to a specific cell in the matrix.

  (example lets say that this robot detects the first object at position 400 x 400, this cell instead of zero would have a value of 1).

  The final product should be a 3d mesh/surface chart that updates the robot moves around the room (updated at intervals of 1 second).

  I know that this could be done in Matlab, so I thought that I could use the MathScript node, but that I can export my front mesh function?

  Thanks for the help

  Here's a quick code showing a 2D histogram displayed in 2D or 3D.

  Modify if needed. Of course if you want to cap the z to 1, use simply 'replace the subset of table' with '1' as element instead of the current structure of "in place".

  

• Windows Vista CD problems - "Windows cannot read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes.

  Original title: problems of Windows Vista CD

  Windows Vista Home premium. You want to burn on a CD - RW disc image files. Inserted the disc in the drive and got the message "Windows is unable to read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes. If the drive is not formatted, you must format it before you use it. "I can't get a dialog to come so that I could format. Not had this problem with a disc previous out of the box Memorex even.

  My problem has been resolved by the www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-windows-vista/ procedure. The first element - material Detection service kernel - managed.

• Cannot retrieve the songs to a cd error "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

  Oriiginal title: can not extract the songs from a cd

  I have problems ripping the songs from a cd in my windows media player library. Whenever I click "Rip CD" this message "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. "How can I fix it?

  Hi littleprincess54,

  (1) have you checked with diffΘrents CDs?

  (2) since when are you facing this problem?

  Method 1: Run the troubleshooter in Windows Media Player settings and check if that makes a difference

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Change the location of Rip. see the steps mentioned in the link

  To change rip settings in the Options dialog box

  Method 3: You can follow the steps mentioned in the link below that relates to a similar question

  Windows Media Player error C00D1197

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drop-down menu is hidden behind the elements

  Hello

  I have a right to 2 containers after another. Drop-down menu is in the first. When I want something to choose in the drop-down menu, he hides behind the elements in the second container.  How can I make this drop in the front, when the seecting elements?

  In my application, I also noticed that when I didn't use a drop-down list ScrollView did disappear after the elements below the drop-down list. Then when I used a ScrollView around all elements, it has been resolved.

  A drop-down list in cascades infact do not come on the top items. It expanded just himself and all the elements under the menu drop-down get pushed down. When the bottom is reached, items below, that the drop cannot be pushed more, so the drop-down list will appear behind items.

  When you use a scrollview, the items in the drop-down list may get pushed too far below is necessary because the window is not limited to the screen.

  I hope that was a little bit useful.