malicious program or a 10.9.5 OSX system library folder?

Similar Questions

• "'Monitor' program has been found running on your system -"

  A "monitor" program has been found running on your system - please unload from memory "Please can someone explain how to do this." I am running Windows Vista Home Premium + SP2. Thank you.  "Silverfox".

  The above message appears several times on my screen - what is it and how I unload it (sorry if assigned to the subject not listed)

  Silverfox salvation,

  Welcome to the Microsoft community.

  Leave your post, it seems that you have found an error, a "monitor" program has been found running on your system - please unload the memory on your computer screen.

  Quick questions:

  1. When exactly the error? Is - this random?
  2. Have you made changes on the computer before this problem?

  You can try the following hotfixes and check if that helps get rid of the pop up.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Get back with the result of the steps suggested also if you need help on Windows let us know and we will be happy to help you.

• You can see how many times a Mac fell in the OSX system?

  Anyone know if you can see how many times a Mac fell in the OSX system?

  I know that you can see, but I don't know.

  I already checked system information etc.

  Thank you!

  Kind regards

  Rajesh

  If you mean physically not fallen there is no information.

• Twunk_16.exe isnot program compatible with 64 bit Windows 7 system

  original title: twunk_16.exe

  Twunk_16.exe isnot program compatible with Windows 7 64 bit system and I need to run other programs, for example Photoshop.  How can I get a compatible version of WHO and where does go?

  You can not. There is no 16-bit subsystem in any 64-bit Windows.

  If your device needs TWAIN 16-bit dual boot with XP, you can, get XP in a virtual machine or get a new device with 64-bit drivers.

• Hello. I'm having trouble installing my Photoshop CS3 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS3 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Once the software is installed, it will not be removed under normal circumstances.

  I do not know if your computer is still infected and it is removed or the problem is that you can't 'see' photoshop' but it is always installed.

  to verify this, check the installation directory and check its size on your hard drive.

• Hello. I'm having trouble installing my Photoshop CS2 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS2 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Hi Keith,

  You won't be able to re - install using the discs and the number of series that you used initially, but we have a solution.

  The activation for more server CS2 is no longer in service. For this reason, we did a version of these titles of software available that doesn't require activation. This is for users who already buy the software.  For more details and specific links for the software, please see the following link:

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Instead of your old serial number, use the one shown next to the download link: download Acrobat 7 and CS2 products

  Guinot

• Got a recurring pop-up with the firefox logo, pop ups disabled window. some kind of malicious program

  Recently a kind of male-ware jumped to the top of windows when I do a secondary tab or click on a piece of information or something like. Also get a video ad in the lower right. These appear to occur separately. I followed the steps outlined in the help section. Downloaded Malwarebytes, it ran, still having the problem. Reset computer to a previous date. Still having the problem. Pop-up window comes up with the firefox logo in the corner. Takes too long to load, I usually close it until I can see what the devil is really. To appear a lot tho and really become a problem.
  Help, please.
  Thank you
  Tracy Lilly

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of. I realized that malwarebytes is on the list, but try others. If push comes to shove, you may be forced to be:
  At littera Do this first) UNINSTALL FIREFOX WARNING: THIS WILL REMOVE ALL OF YOUR FIREFOX INFORMATION! IT CAN BE HIDDEN IN YOUR FIREFOX DATA TROJAN HORSE AS SOME VIRUSES TARGET SPECIFIC BROWSERS!

  (B) remove your computer to a specialist. They will know what to do, because this seems to be a malware problem, not a problem of Firefox.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• XP cannot download or run malicious programs says "windows cannot regonize this file."

  I was uninstalling malicious software looking for my computer and I inadvertently all my icons turned into Notepad files during the process.  Also, I can't access the start menu programs (Spybot, symantec, etc.) because the start menu programs also open in Notepad.   I have looked on the net and couldn't get anything to work.  I can't even download anything because it comes up with the "windows cannot open this file...". ', it is ususally a .exe file problem.

  I tried to copy and paste the rundll32, but he did nothing.  I am troubled by this because it worked very well.

  Thanks for the help

  Mark

  Hello

  · What is the complete error message you receive when you try to download?

  Follow the steps in the links: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

• Where can I report Zero-day and other malicious programs to improve Web Security Appliance filters?

  When scanning actively vulnerabilities on our network we meet sometimes emerging or other malware exploits that connect to the command and control on the Internet servers. Where can I report a URL command and control servers to Cisco to improve the Web Security Appliance for the entire community of Cisco?

  Currently, we use only the black list feature in the WSA.

  It would be more useful that these C & C sites have been blocked by the signatures of Cisco.

  The Security Center, a self-service portal, offers a new option to check the reputation of URL, and/or submit URLs for review. All the presentations via the portal are usually reviewed within 24 hours.

  • Go to https://securityhub.cisco.com (authentication required)
  • Click on requests for URL reputation > Lookup or submit URLs
  • Enter the URL in the box provided (one per line)
  • Select Web Cloud security > Lookup > This will show you the current reputation for each URL (by example, if neutral is he not be blocked)
  • From there, you can submit the URL (s) for review by suggesting a different type (e.g. malicious if you think he should be blocked)

  I hope this helps.

  --

  Sara

• I have a 2012 10.8.5 OSX system. I think it's slowing down lately. Anyone recommend ElCapitan upgrade software or other?

  I find my system becomes slow. I've been reluctant to upgrade because of negative reports and my skill level. Someone can tell me that update works well and is free for this version?

  The only available update is now El Capitan, unless you have already downloaded the Mavericks or Yosemite. If you have downloaded before, go to the App Store purchases to download.

  Activity monitor - Performance Monitor problems

  Performance Guide

  Why my computer is slow

  Why your Mac runs slower than expected

  Slow Mac after Mavericks

  Things you can do to solve the slowdowns See post by khati

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read.

  Etrecheck - Information System

• Laser Jet Pro 200 Color MFP: cannot scan from 10.8.5 OSX system preferences

  Have recourse to the scanner via the preferences system for 2 years. This was recommended to me at Office Depot when I bought the machine.

  Now I have 'the scannner impossible to complete the scan.

  Copy works by function (from the machine), so scanning / copy glass is OK. Printing from the computer works as well

  (connected by USB).

  Earlier today, before installing the printer v3.1 for OSX driver, I got the message "error com.apple.imagecapturecore 9930.

  I have reset the system twice.

  Am currently with all updates.

  Still does not scan.

  Any thoughts?

  Hi @PhilJ1,

  Please try these steps, it should help, How to open the applications of a developer not identified in OS X Lion mountain.

  Thank you.

• After having recently updated windows, some programs no longer work. In addition, System Restore does not work.

  After having recently updated windows, some programs no longer work.  Also, when I went to do a system restore, that he would not allow me to restore to an earlier date.  Among the programs that no longer work are VLC Media player, ieploxer, f.lux.  Even though I have uninstalled and reinstalled they would not load correctly.  I would get the splash screen for the program, but noting else.  When I am gone in Windows Task Manager the program would not appear in Applications, but there are processes running.  And an interesting thing, the exe afficheraient use of the 72K memory.  Still, even for different programs.

  What can I do?

  Start the command prompt, and then type

  sfc/scannow

  Do check and see what the result is.

  Also run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• After an unexpected program has been installed on the XP system, now all files are hidden

  I had a problem with a program on my system without my knowing who said I had all sorts of problems of security etc, but would have to buy the program for hotfixes take place, I had to do a closed down tough because he I was not allowed to use anything on the computer. I then made a start in safe mode and then restored a system. Once it restarts again all files in my documents where ghosts and said attributes when hidden. I could see the graphics in the file if I put the file to film but to share by clicking on each of them they were ghosts. I couldn't open any JPEG files only visualize in Filmstrip mode. Could someone tell me how to solve this problem

  * original title - my documents folder problems *.

  It appears the problem with viruses. Check with your security software

• "Add or remove programs" shows a lot of empty spaces between bad program actually installed view.__What in my system, Windows XP Professional version 5.1 SP3.__Pleace, let me know how to fix it.

  • You have problems with programs
    Windows XP Professional version 5.1 SP3
    Installed program: view.
  • Error messages
    No error message.
  • Recent changes to your computer
    Dates of XP to the top, but this problem happened several years ago.
  • What you have already tried to solve the problem
    Ask the Helpdesk of Microsoft Finland, without solving the problem.

  Often caused by AutoCAD.

  Start > run > regedit [Enter] and navigate to:

  HKEY LOCAL MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

  See here in the register; one of the icons has a negative number. Replace it with a positive; most of the files have a 1 icon. Windows will try to guess the icon if you remove the entry altogether.

  If this does not apply to your situation, then download the MVP Ramesh script below and run it. This script lists all references to negative icon present in the registry and sends them to a log file.

  Script - http://windowsxp.mvps.org/utils/ARPNegCheck.vbs (lists all references to negative icon in Add/Remove) MS - MVP - Elephant Boy computers - Don ' t Panic!

• denied access to the c: drive and all the mistakenley of windows programs.i refused my access to the system to my c: drive

  Hello

  This afternoon, I tried to install the home group. When I did, I got a message that windows could set up homegroup for this pc. (I'm not sure if this is relevant, but it's the last thing I did with windows before my problems started).
  -At the moment when I try to go to c:\, I get an access denied message.
  -When I go on c:\Users\Patrick then it shows my files and the directory.
  -When I opened a word from this directory document, it works (so I have read access).
  -I can't make a new folder in my home directory.
  -When I start for the mmc instance get Windows cannot access... 0x800704b3 error code after diagnose I get an error that convenience store could not start error code 0 x 80070005. (it happens with all windows utilities.
  -When I start safe mode it restarts after a few seconds (after he show users)
  -When I try to activate the account administrator to the command prompt it says access denied.
  -When I try to access the settings with the UAC, it does not.
  -When I start a normal program (like VS2008) it starts up, when I do as an administrator I get the same error that when im from the mmc.

  I have my PC from Vista

  Homegroup only works for Win7, Win7. So I don't know what you were doing. Try a system restore to before that you did whatever it is that you did. You can start with your Vista DVD and access to restore the system from there. MS - MVP - Elephant Boy computers - don't panic!