"'Monitor' program has been found running on your system -"
A "monitor" program has been found running on your system - please unload from memory "Please can someone explain how to do this." I am running Windows Vista Home Premium + SP2. Thank you. "Silverfox".
The above message appears several times on my screen - what is it and how I unload it (sorry if assigned to the subject not listed)
Silverfox salvation,
Welcome to the Microsoft community.
Leave your post, it seems that you have found an error, a "monitor" program has been found running on your system - please unload the memory on your computer screen.
Quick questions:
- When exactly the error? Is - this random?
- Have you made changes on the computer before this problem?
You can try the following hotfixes and check if that helps get rid of the pop up.
Method 1:
Step 1:
Start the computer in safe mode and check the number.
Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
Follow this link provided below to start your computer in safe mode.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2:
Put the computer to boot and check if the problem persists.
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
It will be useful.
Get back with the result of the steps suggested also if you need help on Windows let us know and we will be happy to help you.
Tags: Windows
Similar Questions
-
When I open the Web to date 6.0 the above error is coming. I can't update my Web site more.
Who can help?
Thank you
Notenkraker20
Hello
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the Forums of Internet Explorer development.
http://social.msdn.Microsoft.com/forums/en-us/category/iedevelopment
It will be useful.
-
Installed upgrading Windows 7 on Vista. I lost the use of Word and Excel 2007
Error code: a debugger was found running on your system, please remove it from memory and restart your program.You will find the support for Windows 7 in these forums-online http://answers.microsoft.com/en-us/windows/forum/windows_7
You will find support for Office 2007 applications in these forums-online http://answers.microsoft.com/en-us/office/forum/office_2007
-
Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it. 2. enable the browser error Network Wizard page. Downstairs, the options are either save or cancel.
My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
I must tell you that my browser is Mozilla Firefox.
Thank you.original title: Notification settings searchHello
I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.
-
debugger found running in your system, please, unload and remove it from the computer
I tried running of malicious software and microsoft security essential, but I always get this message when I try to open certain programs.
Hello
I suggest you check in SafeMode with network.
Method 1:
Step 1:
"A description of the Startup Mode options:
http://support.Microsoft.com/kb/315222
Step 2;
If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
How to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
After an unexpected program has been installed on the XP system, now all files are hidden
I had a problem with a program on my system without my knowing who said I had all sorts of problems of security etc, but would have to buy the program for hotfixes take place, I had to do a closed down tough because he I was not allowed to use anything on the computer. I then made a start in safe mode and then restored a system. Once it restarts again all files in my documents where ghosts and said attributes when hidden. I could see the graphics in the file if I put the file to film but to share by clicking on each of them they were ghosts. I couldn't open any JPEG files only visualize in Filmstrip mode. Could someone tell me how to solve this problem
* original title - my documents folder problems *.
It appears the problem with viruses. Check with your security software
-
OP: I can not install Cosmi perfect PDF Creator on my Vista desktop
How can I change my security settings on my Vista operating system? I try to use Cosmi perfect PDF Creator and I get this message: "the macro cannot be found or has been disabled because of your macro security settings.
Hello stewart02,
It seems to me that the Word process does not and is not able to create macros to create PDF documents with the Cosmi perfect PDF Creator. You should be able to disable macros in the tools of the program. However, I suggest that you post your question to the Support for a better Cosmi respose to your question. Here is a link you can follow to report your problem:
https://www.Cosmi.com/support/Cosmi_Support.aspx
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
I got limewire 5.2 installed and tried to install the 5.5 update, but keep the same message: this program has been blocked. Your administrator set the strategy of blocking this program. LimeWireWin.exe unapproved Publisher"I really want this program on my computer, I tried right click on the file to"run as administrator."I also tried to go to control panel, click Administrative Tools (had to change to Classic view to find), but could not find the local security settings.
'Local security settings' are a reference to group policy, group policy is not included in the 'Home' of the editions of Windows.
Is there a Parental control on your machine? 'Parental control' is a section of help and Support, accessed via the Start Menu / Help and Support.
Following on the publishing server warnings type "Publisher" in the same program help and Support.
Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box. This will open your Temp folder, there, you can remove all Windows will allow you to do.
It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.
"Policies" could be mentioned around this area of the registry.
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\PoliciesTo restore default security settings, follow the instructions of Vista in the present.
Any security software interfere with your installation?
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135How to restore the security settings the default settings?
http://support.Microsoft.com/kb/313222/#appliesToHave you tried to create another user to test with?
Sometimes when you right-click on a file to access the properties in a box to unlock to be seen at the bottom of the properties.
-
Skype has stopped working "the program has been closed because no solution has been found."
Skype has stopped working and Windows was looking for a solution. The program was closed because no solution has been found. How to solve this problem.
original title: Skype stops
What follows on the site of Support of Skype can help: http://support.skype.com/en-us/faq/FA10382/Why-does-Skype-crash-on-my-computer
There is additional support for Skype: http://support.skype.com/en-us/ and Support of Skype forum is: http://community.skype.com/t5/English/ct-p/English?profile.language=en -
First story... I installed MS Security Essentials, but I get something into my computer that caused his failure. It would not uninstall, and then finally after a long struggle I finally got deleted. I have no reference to it in the registry nor are there all of the folders on the computer I can find have all files to make it. I tried to install it again but I always get an error that it cannot find the mp_ambits.msi file. Even when I run at the prompt of msg in the folder newly created with this file in there.
I then tried to have at least the Defender installed to see running windows and then I get the "Protection of the MS Client has been found" which refers to the MS Security Essentials, which is not installed. But there is obviously some there remains something that makes my system "THINKS" that Essentials is installed.
Anyone has an idea on how the devil clear this issue so that I can either install Windows Defender or Security Essentials?
Hi BillSheets,Try to use the cleanup utility to remove the program completely from your computer:For more information, see:Before installing Security Essentials, refer to this article: -
If I get a data execution prevention message, how can I find which program has been interrupted?
Hi Robhofm,
Usually the Data Execution Prevention (DEP) automatically monitors Windows programs and services. You can increase your protection by having DEP monitor all programs.
For the program being stopped by DEP, you will receive an error message indicating the cause of the stop and the name of the program.
For more information you can consult.
Data Execution Prevention: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questionsSee also:
What is Data Execution Prevention?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-data-execution-preventionThis refer below link provided to change the DEP settings.
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settingsThank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
a buffer on which has corrupted the internal status of programs has been detected. Roxio
Start the computer to the top I get two error messaged witndows the first titled_Microsoft Visual C++ RUntime Library and reads American Saturation detected Programs...s\Roxio Shared\9.0\SharedCOM\ROxWatchTray9.exe
A buffer on which has corrupted the internal status of programs has been detected. The prgram cannot continue to run safely and must now end.
The second is the runtime error:
Program:... .OMMON SharedCOM Shared\9.0\SharedCOM\ROxWatchTray9.exe
R6025-pure virtual function call
I don't know what it is and what to do about this. The only change was the installation of Norton Antivirus 2010 two days before. Anything downloaded or modified. A system restore did not complete.
Any help is appreciated
Neil
Hi Neil S,
This is due to a request from Roxio is trying to launch at startup. Follow the suggestions in the article below to solve the problem.
http://KB.Roxio.com/Search.aspx?URL=/content/KB/MyDVD/000110CR¶ms=Bindu R - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: file compressed zip
____,
I have a problem with the compressed zip folder, a default application with windows vista. Its default program has been changed. It is defined in the pdf from adobe for the opening program. so adobe pdf software does not open the file. Then, give me an idea, what the problem?
Download and run this
http://www.Winhelponline.com/fileasso/zipfix_vista.reg
or right click on the file
Select open with
Choose Windows Explorer and also check always use the program
or
Install this
-
Get the message: this program has been deleted while trying to open Windows Media Center
Original title: I used to have Windows Media Center... But no more?
I'm trying to connect with my XBOX 360, and it said to open Windows Media Center. I clicked on start, then went to where Windows Media Center has been. I clicked on that and it says "this program has been removed." Huh! Is there anyway that I can download the program, or something? Or is it IN the Windows during the programming? Info/comments will be greatly appreciated. Thank you!
Brock
You could try to control Windows Media Center via Control Panel / programs and features / Turn Windows Features on or off / multimedia / Windows Media Center, make sure that it is checked.
System Restore will not uninstall or reinstall your entire operating system, take your machine over time until the selected restore point (you choose) and load Windows from this date and time. Programs and updates that have been installed since that date and time are no longer available and need to be reinstalled. System Restore will also leave you a "Undo" restore point which allows you to return to the present before the start of any restoration. It also gives you an option to check what effect the return to a previous era will have on your program installed, etc.. It does not affect your personal data, applies only the settings, system files, programs, drivers, and updates.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html -
I cancelled the "Creative Cloud student and teacher edition (one year)" on March 23. But the page shows the next pay day will be April 25. It is sure that my program has been canceled?
I paid 71508won for cancellation fees.
You have to contact support directly for an answer...
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )
Maybe you are looking for
-
Menu main movie Audio playback during the film
Hi all Good evening I'm watching the X - men First Class movie, I bought a long time ago. Unfortunately, once that I touched READING the menu main iTunes film starts but continuous loop during the movie main menu theme music makes it impossible to he
-
Messages are: ' Exc in ev handl: TypeError: brw is not defined "in a small window labeled" [JavaScript Application] and, after clicking on "OK" in this window, a browser window opens with none of my recorded options with the following: "bitsMarkingCo
-
Satellite M35x: while the AC adapter is plugged in the battery start to unload and beep
Hello I'm having the same problem as this person here...http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15116My Toshiba Satellite M35x, when it is plugged in, just start discharge and beep.He always did regularly, like every tw
-
Hello Do a small project where I take a folder full of files, VRML and loading in an image control. The problem is that it can take a little time to do it according to the number of files is. I was wondering if it is possible to build a loading scree
-
Image Factory issues pure Edition 5.0
Hi guys! Just a tip: The official factory image 5.0 (LXE22.46 - 11) posted by Motorola seems to have some problems. After the flash of the image, shows the status of software in the bootloader: changed. It should say: official. Also, this factory ima