Manage display settings in Vcops standard 5.8.2

Similar Questions

• How can I get advanced original to standard oem display settings

  MY VALUES CHANGED BY ANOTHER USER, AND I HAVE NO IDEA WHAT ARE THE ORIGINAL ADVANCED DISPLAY SETTINGS!

  WINDOWS XP

  Hi Sparomatic,

  What is the value? in any case, I guess that your desktop settings are changed. To restore it, click Start-> settings-> Control Panel-> display-> theme-> select Windows XP or classic Windows (as you wish). Click on apply. Now, click on the settings tab and you can change the size of your screen by using the slider to the resolution of the screen.

  I hope this helps.

• my display settings keep returning on 2 screens at startup to the top

  I have attached a second monitor to my Sony laptop.  The 2d display monitor used to iterate through a docking station Kensington DisplayLink.  For some reason, the docking station picks up is no longer display for the #2--si monitor I recently started to connect the monitor directly #2 on my laptop.  Now every time I disconnect the monitor #2 to try to use the laptop with the Moose #1 display attached - after startup, it comes in white.  I discovered the Dungeon of display settings back to the #2 monitor, as the main display with the office displays only on the monitor #2 - it's why my laptop screen is blank - unless I'm reconnect the 2d display whenever I start.  But it is not practical and the net effect is that until this has been resolved I can't use my laptop away from my office.  I keep resettingt the display settings in the control panel to a single monitor, but it keeps going back to 2.  What is the solution?

  Hi, Msnsurf101,

  Check your settings in the Bios

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. For more information, see the documentation provided with your computer or go to the website of the manufacturer of the computer.

  

  Warning

  Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  How to switch monitors primary & secondary

  http://www.ehow.com/how_5919616_switch-primary-secondary-monitors.html

  Uninstall of display adapters

  Start > right click on computer

  Select manage

  Click on continue for UAC window (Vista or 7)

  Select Device Manager

  Click on the + sign next to display adapters

  Right-click on the adapter and select uninstall

  Restart the computer

  Windows will reinstall the adapters

  See the updated chipset manufacturer site

• liquid z530 manage notification settings

  Hello. I would like to know how to manage notification settings. For example, when I play music often there is a brief interruption when I receive a message from Facebook, email etc. I want to stop completely. No interruption whatsoever. Is this possible? I tried all this without luck. Hope someone can help out me.

  MF

  mindfever,

  If you go into the settings, tap applications, there will be a list of installed applications. If you open the app there is a checkbox next to display Notifications. If you uncheck this box then you shouldn't receive notifications from him any longer.

• Issues with the display settings - all super tiny

  I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny.  I found a page via the display settings (avancΘs?) that allowed me to adjust the percentage of the elements on the screen.  I reduced to 40%, and then the setting stuck and now I can not see or read anything.  I'm trying to return to the display settings, but I can't find this 'page' which allowed me to make this change.

  I saw a similar post:

  "I messed up my display settings. my resolution is so great that I don't see anything but black vertical lines and sets of 3 white dotted lines in sequence across my screen. my mouse can not be seen either. is there anyway to restore my original settings? It's as if everything is bigger there should be 200 to 300%.

  Hello

  There are a few things you can try:

  1. reboot the PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "last good known Configuration". Allow Windows to start.

  2. restart PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "Enable VGA Mode". Windows XP loads with the color values that can handle your "lower" resolution and display driver Once in Windows, change the resolution, then restart the PC.

  3. try to go into "Safe Mode", which is accessible in the same way as "VGA Mode". "Review the same routine as no. 2.

  I tried to hit F8, but nothing happens, I tried to reboot several times.  How do the Advanced Options?  Someone knows it the screen that I talk with the possibility of adjusting the percentages, how can I find it again?  So I can not really read or see anything.

  Hi fixxazd,

  For instructions on starting in the advanced system recovery options, see the following articles:

  A description of the options to start in Windows XP Mode

  Advanced Troubleshooting for General startup problems in Windows XP

  See also:

  How do advanced clean boot troubleshooting in Windows XP

• Always insensitive display settings?

  Well, my computer resets to a lower screen resolution, but when I go to my display settings to change, the window does not respond, and the blue loading circle appears everywhere where I put my pointer. I had this same problem in December, but I tried one of the recommended steps in my thread of the previous question, and it worked. This time, however, it does not.

  I tried the SFC scan checkdisk and system restore, who did restore to an earlier point in time, but unfortunately, the new resolution has always remained the same. I even tried to change the resolution through the registry editor and enter a new DPI, but that has not changed anything either. I use Windows Vista with HP Compaq Presario CO60. If it is possible to set the display settings and make sensitive again would be great, but if not, is there another way to change the resolution of the screen? Thank you!

  Your user profile may be corrupted.  To fix this usehttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  You can't just transfer everything via - you must make sure that you get all the files and folders that you need and there are several files that cannot be copied (the article explains this).  But if the other account works, then this is the solution.  I would like to make another account administrator or two just in case something happens to this news.  Also, I would delete the obsolete account once that everything that needs to be moved was moved.  It is generally recommended to use a standard account for your daily work and the account administrator only when needed (for reasons of security - a hack of an account administrator is MUCH more dangerous that a hack of a standard user account).

  Bravo to come with this option!  Now all we need to do is implement as described above and you should be good to go.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• Why first changing the Windows 7 display settings?

  Hi all

  I am running Windows 7 on a brand new i7, two monitors and a nvidia Quadro 4000. I have most of the Windows display settings (Aero-stuff) turned off to speed up Windows performance.

  When I opened the first, first changes the windows settings - something - display. Both monitors flicker black and the Windows taskbar change color and opacity, as if someone had gone in the command menu customize and changed my look colors and display.

  The question is this - because the first is changing my display of the Windows desktop, other programs are still using the previous (correct) display settings. Causing other programs to crash whenever I try to alternate between them. It translates into me being able to run the first to him alone, which significantly slows the multitasking.

  WHY FIRST CHANGE MY SETTINGS IN WINDOWS?

  Better yet, how can I stop this? I can't find any project, General or sequence settings that give any hint.

  If I need to change the settings of Windows customization to match first is to choose himself, it's good, but I still need to know what are these parameters, so that all programs use.

  Thank you

  -Matt

  I use a full Win7 Aero desktop computer on my Quadro 4000.  I had a problem similar to yours; "Aero" turned off when Pr and then open 'Aero' turns after the release of Pr.  If you go to the NVIDIA Control Panel, under Management 3D settings, on the global settings tab, select a color deep for 3D applications and assign the disable.  Then check that Pr uses this setting by looking at the Pr entry on the program settings tab (if the Pr does not list programs you can Add this).

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Tecra M2 - display settings

  Hello!

  I have a Tecra M2 laptop and I want to change my display settings, in order to increase my screen resolution to 1024 x 768 for a higher resolution.

  I have not found all the drivers to change...

  Can you help me?

  Thank you.

  Hi Ricardo

  You can find the driver to display on the Toshiba site.
  Go to: http://eu.computers.toshiba-europe.com then support & download--> download drivers

  Best wishes

• Satellite A200: nVidia 7300 Go does not save the display settings

  I'm using the latest drivers available, but I can not even save display settings in nvidia
  Control Panel. For example if I turn down the brightness and increase digital vibrance and apply
  These settings, the next time that I reboot or run and release a game settings ALWAYS comes back to the
  their default values.

  I can't use a monitor external because the default brightness settings
  are very painful! They are literally blinding! Color settings do not record of either.

  Support for the New Zealands tech told me that it is a feature of Vista. What's supposed to be a joke?

  I also get bad interference on the screen lines when using an external monitor. It's very bad.

  Hello

  Have you noticed that emits from the first day with the factory settings?

• Does anyone can help with the display settings on Satellite 4070?

  My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
  The display settings are gone and continue to go haywire and display a message saying:
  There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.

  I tried to change the display settings but they go back - anyone got any ideas on that?
  I know there is a product recovery CD, but naturally enough I don't have that either.
  Thank you

  Hello

  I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
  That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.

  I think you are using the Win98. Am I wrong?
  Then visit Toshiba, download the Trident display driver and install it!

  Good luck and have a nice day ;)

• Satellite L40 - 14F - display settings problem

  Hello

  I have Toshiba Satellite L40 - 14F with Intel GMA X 3100 video card.
  I have problem of display settings, I can't change the screen resolution and color quality when installing the drivers for video card, screen resolution is 800 by 600 pixels and color quality is the lowest 4 bit, when I uninstall video card drivers can change it. I try to install other drivers, there is the same problem :( Please help me :)
  Concerning

  I've updated the BIOS then install video card drivers and it works :)

• HP Pavilion Notebook PC g6: display settings & customize

  Hello

  Need help-

  I've recently upgraded to 10 64 bit windows and now when I righ click on desktop and click on personalize, display settings it comes up with - see attached photo >

  

  Any help would be appreciated.

  Thanks in advance.

  Hello @jm88,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the issue of the display and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number

  In the meantime, try to perform the Microsoft push Resetline and let me know how it goes.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Display settings S920 missing page, need help

  Hello

  I have a strange problem with my phone S920 and need help.

  First I describe that I made:

  I bought two phone weeks and first install update "by air" (from the settings menu, "System Update"). The current version number is S920_ROW_S117_130815. After that, I set the settings on the phone, insert the SIM and SD card and started to install applications. When I found that photos from my SD card are not visible in the gallery. He won't get the images in the external SD card. I can see all the files on this map in the file browser and open, but the Gallery shows only a few files from SD internal tried to force to re-scan of the media files. Finally, Gallery shows all the photos, but I found some files on my SD card had size = 0 bytes. SD card was probably not properly disassembled during a new analysis. I've wiped the SD card in settings of the phone and coppied all data to the SD card in my PC. And re-scan again. Now all the files was correct and all images is vissible in the gallery. But a few days later, I found that I can't run page display settings. I tried to access to this-> all the settings, fron-> display settings but received a message "Unfortunately stopped Control Panel:

  OK, I noticed that my problem disappeared after I disabled my live wallpaper. Let me tinker some more...