Manage selection lists - how import/load a Select lists?

Hi Eloqua users,

I created some forms as im having to locate in other languages.

I have our forms we have couple of select lists that I'm going to locate too. One of them is a list of selected countries.

Is there a way to uplod or automatically import a selection lists?

Any country that SELECT lists is available in other languages that I could import?

I try to avoid editing a whole list :-)

Thanks a lot for your answers.

Rhea

Hi Rhea

Certainly, you can download a list of selection without having to manually enter each value.

E9 if you go to automate > forms > Forms tab you can then click the Menu n forms manage and then select manage lists. You can create a new list or select an existing one. In the menu select list in the upper right corner, you can select Upload select list and follow the wizard to the process. You will have a column for the value (the value that is stored on the contact record) and the name (this is what is displayed in the drop-down list of the select list.

E10 you can go to settings > select manage lists and follow the same procedure as described above. You can create a new list or select an existing one. In the menu select list in the upper right corner, you can select Upload select list and follow the wizard to the process. You will have a column for the value (the value that is stored on the contact record) and the name (this is what is displayed in the drop-down list of the select list.

I hope this helps!

Tags: Marketers

Similar Questions

How to load the second list meter if I have something in the first list of select/focus?

How to load the second list meter if I have something in the first list of select/focus?

public class spintest extends BaseScreen implements {FocusChangeListener}

final String [stateList] = {"New York", "Washington"};
final String [] NYcities = {'Manhattan', 'Queens', 'Brooklyn', 'Bronx'};
final String [] WashCities = {"Redmond", "Kent", "Seattle", "Bellevue"};

public SpinTest() {}
SpinBoxFieldManager spinBoxMgr = new SpinBoxFieldManager();

SpinBoxField spinBoxStates = new TextSpinBoxField (stateList);
spinBoxStates.setFocusListener (this);

SpinBoxField spinBoxCities = new TextSpinBoxField (NYcities);

spinBoxMgr.add (spinBoxStates);
spinBoxMgr.add (spinBoxCities);

Add (spinBoxMgr);
}

' Public Sub focusChanged (field field, int context) {}
If (spinBoxStates == field) {}
Salt string = (String) spinBoxStates.get (spinBoxStates.getSelectedIndex ());
If (sel.equals ("New York")) {}

I have to load all the cities of New York in the second wheel if I select 'New York' in the first wheel

}
else {if (sel.equals ("Washington"))

I have to load all the cities of Washington in the second wheel if I select 'Washington' in the first wheel

}

}

Simply call the TextSpinBoxField.setChoices method, transmitting your new list of choices.

How to load the contents of a layer as a selection in photoshop CS4

Hello
In photoshop cs4 when I ctrl-click on a layer thumbnail in the layers panel, photoshop select any layer not its content. How to load the contents of a layer as a selection in photoshop cs4?
Thank you

to load the contents of the layer as a selection, you go to the Panel layers and Ctrl + click on the RGB.

How to load dynamically an inspection of PC previously built in VBAI 3.6?

Hello world

A 1744 SmartCamera jointly with VBAI 3.6 and LabVIEW 7.1.1 is used to conduct inspections on a test bench. Inspections are created in VBAI 3.6, communication between LabVIEW and VBAI is done through ActiveX. For memory used on the SmartCamera (now there are only a few inspections, but their number will increase rapidly because the test bench where the SmartCamera is integrated will test hundreds of different EHR, each with an own inspection) I want to manually export inspections of the SmartCamera to the PC where LabVIEW is executed (this could be done through the control that comes with VBAI Manager) , but then I want to load the necessary inspection dynamically via LabVIEW. How do I do this?

Access with FTP for the SmartCamera client I see the directory structure, and I know that inspections are in/vbai/products/and everyone in a own subdirectory, where two files exist: Inspect.bin and Info.txt. The control manager creates only a VBAI file when you export an inspection to the PC.

Of course I can do both ways - export and import of an inspection - via an additional tool of LabVIEW that simply moves the appropriate directory and its contents via FTP, but y at - it another way to do as described above (export manually using the Manager of the Inspection, import programmatically using LabVIEW)?

Best regards from sunny Berlin

Carsten

Guten Morgen Carsten,

ICH habe heute Antwort aus den USA has. Yesterday our leider wird,

dass're nur durch den Manager of Inspection possible ist, die zwischen .vbai und .bin conversion

touch. Man konnte noch den select Inspection stage use, um dem Benutzer die

Auswahlmoglichkeit zwischen different content zu ermöglichen,

hyva ja dafur alle auf der Cam vorliegen content however, was bei something 500 content

schwierig breast uninteresting.

Possibility surely die, die ich sehe daher, der ist Weg, den of the La showers did.

namely alle content once by auf die inspection Manager Cam supported.

die Yes erzeugten bin-files in einem zentralen deposit auf der host-Fliegengitter speichern

und dann bei Bedarf auf die Smart Cam loaded FTP.

Sorry, aber das scheint bisher really der Weg zu breast ointment.

Beste Grüße,

David

(1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
(1) how to reset the task in view/default Access Manager?
(2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

Double-click inside the border/edge to bring it back to the default view for Task Manager.

Malware scan:

Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

If necessary, do all of the above work Safe Mode with network.

To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

http://www.Malwarebytes.org/MBAM.php

Malwarebytes is as its name suggests, a Malware Remover!

Download the free Version from the link above.

Download, install, upgrade and scan once a fortnight

How to use Malwarebytes once it is installed and updated:

1. open Malwarebytes > click the update tab at the top > get the latest updates.

2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

3 MBAM will now start to scan your computer for malware. This process can take some time.

4. when the scan is complete, a message box will appear

5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

7. a screen showing all of the malware displayed the program that is

8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

10. you can now exit the MBAM program.

See you soon. Mick Murphy - Microsoft partner

What is the link state Power Management under PCI Express power management Options list

What is link State Power Management under PCI Express power management Options list.

What is link State Power Management under PCI Express power management Options list.

Hello

The PCI Express Link State Power Management option is part of the PCI-E specification and is working with the State active power management (ASPM) in Windows 7.

It is a complex subject, but can be simply described as follows.

There are 2 levels of power management in PCI Express options.

The difference between these 2 options are the energy savings compared to the latency (time to recover from sleep state).

If you select the first option, moderate energy savings, energy savings are lower, but the time to recover from sleep state (latency) is much shorter.

If you select Maximum energy savings, energy savings are more important, but the time to recover from sleep state (latency) is much longer.

I hope this helps.

Thank you for using Windows 7

Ronnie Vernon MVP

How to load data from ms sql to the by the file rules and maxl essbase
Hi, everybody!
Pretty Shure the kind of topic exists already on the forum, but unfortunately can't find it.

I want to understand, how to load data from the database to ms sql for the PB of essbase application.

(I) so I have:
1. a request for 'society '.
2 and its database 'Plan '.
3. with simple outline, which contains only two dimensions:

-The time period < 1 > (Label only)
-Total year (~)
-Qtr1 (+)
Jan (+)
Feb (+)
Mar (+)
-Qtr2 (+)
APR (+)
May (+)
Jun (+)

-Accounts < 1 > (Label only)
-Lost / based (~) (Label only)
-Revenues (+)
L1.1 (+)
L1.2 (+)
-Costs (-)
L2.1 (+)
L2.2 (+)

(II) also, I created a rules file called "CO_DWH" and associated with this schema
It (Rules file) a 3 columns:
Data of the 'period', 'account '.

There is also the option checked "load data".

(III) in MS SQL Server, I have a database of "hypdb" and "essadmin" with "password" login

(IV) I executed my bat file:
C:\Hyperion\EssLoad.bat
There is only one line:

EssLoad.bat-
startMaxl.cmd EssLoad.txt
----------------------------------------------

EssLoad.txt-
login password admin on erpserver;
Import database data Company.Plan connect in essadmin password using the server rules_file 'CO_DWH' error abort;
disconnection;
"exit";
--------------------------------------------

All plans that I copied well worked ERP system, but I don't understand, this is exactly table in the MS SQL database, data loading to essbase db?
TOU have to do a few things
1. on the server of Essbase, put in place a system odbc for your MySQL database connection
2. in the State of charge, go to the file menu and select open source SQL database and in the source of data in your SQL statement. A few tips. Where it says select, don't put in the select Word and when he says to not put in of. The system adds for you. TI enter a simple SQL statement is to do this in the box so select if your SQL would be normanlly as select * from myTable just enter the code as * from myTable in the upscale neighborhood

The ol/recover the click and fill your connection information. Should bring back the data in the State of charge. Save the State of charge and use

How to load data from matrix report in the base using ODI table data
Hello

How to load matrix report data in the base table data using oracle Data Integrator?

Description of the requirement:

This is the data from matrix report:
```
JOB                       DEPT10                DEPT20  
___________________________ _____________
ANALYST                                           6000
CLERK                   1300                     1900 
```
Need to convert it to the format below:
```
JOB                             Dept                        Salary
_____________________________________________
ANALYST                  DEPT10      
ANALYST                  DEPT20                     6000
CLERK                       DEPT10                    1300
CLERK                       DEPT20                    1900
    
```
Thank you for your help in advance. Let me know if any other explanation is needed.
Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

SELECT workstation,
deptsal as deptsal,
saldesc as saledesc
OF pivoted_data
UNPIVOT)
deptsal-<-->
FOR saldesc-<-->
IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
)

Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

INSERT INTO job_sales
(employment,
deptsal,
saledesc
)
VALUES
(
: job,.
: deptsal,.
: saledesc
)

That's why you use bind variables from source to load data into the target.

Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

INSERT INTO job_sales
(employment,
deptsal,
saledesc
)
SELECT workstation,
deptsal as deptsal,
saldesc as saledesc
OF pivoted_data
UNPIVOT)
deptsal-<-->
FOR saldesc-<-->
IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
)

also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

I hope this helps.

BUT remember that this feature is out in Oracle 11 g.

HP12C: my screen displays D.MY in the display. What does that mean? Is how important it?

I see that I can't erase it w / the blue g button and 4 or 5, according to D.MY or M.DY. Is how important it? >

Hello

It depends on how you prefer to enter the date when using date works for example days between dates.

When M.DY is selected, enter September 23, 2014 as 9.232014

When D.MY is selected, it is entered as 23.092014

Kind regards.

Diagram on how to load envelopes

Hey @claregirl7,

I understand that you are experiencing problems printing envelopes to your HP Officejet 4500 all-in-One Printer G510g. I want to help you solve this issue. As you said, you know how to load envelopes and you just need advice on where to change the pattern of how the envelope is responsible. In order for me to give you the troubleshooting steps specific I have a few questions for you.

1. what operating system is on your computer?

What is my OS?

2. what type of program are you printing envelopes of?

3. you print the envelope size #10 standard?

That being said, most people print envelopes in Word so I'll give you the steps on how to correctly print an envelope through this program. Again, these steps should be incorrect do not forget to reply to this message with your operating system and the program you are printing from so I can give you exact measurements.

How to print envelopes from Word:
1. Open Word and click Mail Merge to top
2. Select "Envelopes" in the upper left side
3. A page of envelopes and labels should now open. Enter your delivery and return address.
4. Select 'Options' on the lower right.
5. Under the tab"Options of the envelope 'to ensure that your envelope size is correctly selected.
6. Select the tab"print"at the top Options Now you must select the method of diet appropriate for your product.
7. Make sure that you choose the option 'face '.
8. Also to ensure that "Needles" is enabled.
9. Press 'OK' and 'print '.
Also, I'll include loading envelopes paper for your printer for additional advice.

Loading envelopes

Please reply to this message and let me know if the steps to solve your problem. Good luck!

How to load .cap on a smart card

Hello world!

I am very confused with java cards. I have written an applet for java card. Tried in Eclipse + JCWDE. Send a few APDU units with apdutool.bat. Works great!

However, I would like to go further and try on a real card chip. The only problem is that I don't know how to load on my card .cap file. I tried to find forums, references or something like that, but all I found was "trying to load, but get the error" or something like that.

I use the JCOP for Eclipse tool (if only for any help)

Can someone find works me of loading in princip? Is their any classes that can be used to simplify the task?

Any help is appreciated
/ L

Yes of course. Normal .zip file.
I can print the contents of the file load.jcsh here:

# /set-var path d:/Wi-Fi/javacard/download/eappsk32k
#Switch trace mode on and connect to a PC/SC smart card reader
#
/mode trace=on
/terminal
#
#Reset the card (request ATR) and select the CardManager
/card
#Set the keys in key set 255 of the JCShell for authentication later on
#
set-key 255/1/DES-ECB/404142434445464748494A4B4C4D4E4F
set-key 255/2/DES-ECB/404142434445464748494A4B4C4D4E4F
set-key 255/3/DES-ECB/404142434445464748494A4B4C4D4E4F
#
#Begin authentication using the appropriate key set
init-update 255
#
#Complete authentication
ext-auth
#
#Display the card registry to check if the applet is loaded and installed
card-info
#
#delete 11223344556601
#delete 112233445566
card-info
#
#Upload the package holding the applet
upload ${path}openeapsmartcard.cap
#
#
#Install the applet in the package
install 112233445566 11223344556601
#
#Display the card registry to check if the applet is loaded and installed
card-info

You should do a few substitutes for your project.

How to load 2 xml galleries loop only function.

How to load 2 xml galleries loop only function.
my function is-
var myGalleryXML = new XML();
myGalleryXML.ignoreWhite = true;
myGalleryXML.load ("gallery.xml");
function callThumbs()
{
_root.createEmptyMovieClip ("Wall", _root.getNextHighestDepth ());
Wall._x = _root.gallery_x;
Wall._y = _root.gallery_y;
wall.addEventListener (MouseEvent.CLICK);
var clipLoader = new MovieClipLoader();
preloader var = new Object();
clipLoader.addListener (preloader);
for (i = 0; i < 6; i ++)
{
thumbURL = myImages [i].attributes.thumb_url;
myThumb_mc = wall.createEmptyMovieClip (i, wall.getNextHighestDepth ());
myThumb_mc._x = _root.thumb_height * i;
myThumb_mc._x = _root.thumb_position = - 3100 + (i - j) * 765;
clipLoader.loadClip ("store /" + thumbURL, myThumb_mc); I want to load this XML Gallery "gallery1.xml".
preloader.onLoadStart = function (target)
{
target.createTextField ("my_txt", target.getNextHighestDepth (), 0,0,10, 10);
Target.my_txt. Selectable = false;
};
preloader.onLoadProgress = function (target, loadedBytes, totalBytes)
{
Target.my_txt. Text = Math.floor ((loadedBytes / totalBytes) * 100);
};
preloader.onLoadComplete = function (target)
{
The new Tween (target, "_alpha", Strong.easeOut, 0, 100,.5, true);
Target.my_txt.removeTextField ();
target.onRelease = function()
{
callFullImage (this._name);
};
target.onRollOver = function()
{
This ._alpha = 100;
};
target.onRollOut = function()
{
This ._alpha = 100;
};
};
}
for (i = 0; i < 6; i ++)
{
thumbURL = myImages [i].attributes.thumb_url;
myThumb_mc = wall.createEmptyMovieClip (i, wall.getNextHighestDepth ());
myThumb_mc._x = _root.thumb_height * i;
myThumb_mc._x = _root.thumb_position =-7210 + (i - j) * 765;
myThumb_mc._y = _root.thumb_position = 180;
clipLoader.loadClip ("banner /"+ thumbURL, myThumb_mc "); / / I want to load this XML Gallery 'gallery2.xml'
preloader.onLoadStart = function (target)
{
target.createTextField ("my_txt", target.getNextHighestDepth (), 0,0,10, 10);
Target.my_txt. Selectable = false;
};
preloader.onLoadProgress = function (target, loadedBytes, totalBytes)
{
Target.my_txt. Text = Math.floor ((loadedBytes / totalBytes) * 100);
};
preloader.onLoadComplete = function (target)
{
The new Tween (target, "_alpha", Strong.easeOut, 0, 100,.5, true);
Target.my_txt.removeTextField ();
target.onRelease = function()
{
callFullImage (this._name);
};
target.onRollOver = function()
{
This ._alpha = 100;
};
target.onRollOut = function()
{
This ._alpha = 100;
};
};
}
}

combine the two into a single xml files if you want to create a gallery.

If you want two different galleries that display at different times, tear down the wall of movieclip after that finished with gallery1 and run myGalleryXML.load("gallery2.xml");

How to load a multiple column table in the coherence of caches?

How to load a multiple column table in the coherence of caches?
I want to load a multi-column (about 20 columns) table in cache coherence. How to change the following code (spatially how to change the SQL SELECT statement)?
Is the following select statement enough: Select the key, the value of EMPLOYEES ?

public static void bulkLoad(NamedCache cache, Connection conn)
    {
    Statement s;
    ResultSet rs;
    
    try
        {
        s = conn.createStatement();
        rs = s.executeQuery("select key, value from table");
        while (rs.next())
            {
            Integer key   = new Integer(rs.getInt(1));
            String  value = rs.getString(2);
            cache.put(key, value);
            }
        ...
        }
    catch (SQLException e)
        {...}
    }

First of all, you need a class to hold your 20 fields:

public class Data {

    private String field1;
    private String field2;
    private String field3;
    private String field4;
    private String field5;
    private String field6;
    private String field7;
    private String field8;
    private String field9;
    private String field10;
    private String field11;
    private String field12;
    private String field13;
    private String field14;
    private String field15;
    private String field16;
    private String field17;
    private String field18;
    private String field19;
    private String field20;

    public Data() {
    }

    public String getField1() {
        return field1;
    }

    public void setField1(String field1) {
        this.field1 = field1;
    }

    public String getField2() {
        return field2;
    }

    public void setField2(String field2) {
        this.field2 = field2;
    }

    public String getField3() {
        return field3;
    }

    public void setField3(String field3) {
        this.field3 = field3;
    }

    public String getField4() {
        return field4;
    }

    public void setField4(String field4) {
        this.field4 = field4;
    }

    public String getField5() {
        return field5;
    }

    public void setField5(String field5) {
        this.field5 = field5;
    }

    public String getField6() {
        return field6;
    }

    public void setField6(String field6) {
        this.field6 = field6;
    }

    public String getField7() {
        return field7;
    }

    public void setField7(String field7) {
        this.field7 = field7;
    }

    public String getField8() {
        return field8;
    }

    public void setField8(String field8) {
        this.field8 = field8;
    }

    public String getField9() {
        return field9;
    }

    public void setField9(String field9) {
        this.field9 = field9;
    }

    public String getField10() {
        return field10;
    }

    public void setField10(String field10) {
        this.field10 = field10;
    }

    public String getField11() {
        return field11;
    }

    public void setField11(String field11) {
        this.field11 = field11;
    }

    public String getField12() {
        return field12;
    }

    public void setField12(String field12) {
        this.field12 = field12;
    }

    public String getField13() {
        return field13;
    }

    public void setField13(String field13) {
        this.field13 = field13;
    }

    public String getField14() {
        return field14;
    }

    public void setField14(String field14) {
        this.field14 = field14;
    }

    public String getField15() {
        return field15;
    }

    public void setField15(String field15) {
        this.field15 = field15;
    }

    public String getField16() {
        return field16;
    }

    public void setField16(String field16) {
        this.field16 = field16;
    }

    public String getField17() {
        return field17;
    }

    public void setField17(String field17) {
        this.field17 = field17;
    }

    public String getField18() {
        return field18;
    }

    public void setField18(String field18) {
        this.field18 = field18;
    }

    public String getField19() {
        return field19;
    }

    public void setField19(String field19) {
        this.field19 = field19;
    }

    public String getField20() {
        return field20;
    }

    public void setField20(String field20) {
        this.field20 = field20;
    }
}

Then you can use it to store data in you original code

public static void bulkLoad(NamedCache cache, Connection conn)
    {
    Statement s;
    ResultSet rs;

    try
        {
        s = conn.createStatement();
        String sql = "select key, value, value2, " +
                "value3, value4, value5, value6, " +
                "value7, value8, value9, value10 " +
                "value11, value12, value13, value14, " +
                "value15, value16, value17, value18, " +
                "value19, value120 from table";

        rs = s.executeQuery(sql);
        while (rs.next())
            {
            Integer key   = new Integer(rs.getInt(1));
            Data data = new Data();
            data.setField1(rs.getString(2));
            data.setField2(rs.getString(3));
            data.setField3(rs.getString(4));
            data.setField4(rs.getString(5));
            data.setField5(rs.getString(6));
            data.setField6(rs.getString(7));
            data.setField7(rs.getString(8));
            data.setField8(rs.getString(9));
            data.setField9(rs.getString(10));
            data.setField10(rs.getString(11));
            data.setField11(rs.getString(12));
            data.setField12(rs.getString(13));
            data.setField13(rs.getString(14));
            data.setField14(rs.getString(15));
            data.setField15(rs.getString(16));
            data.setField16(rs.getString(17));
            data.setField17(rs.getString(18));
            data.setField18(rs.getString(19));
            data.setField19(rs.getString(20));
            data.setField20(rs.getString(21));
            cache.put(key, data);
            }
        ...
        }
    catch (SQLException e)
        {...}
    }

Of course your data object would need the appropriate field names and you will have no channels for all types. It must also implement equals and hashCode and ideally PortableObject.

How to load my cd collection from my windows computer to my nano?

I just bought an ipod nano. I am very new to this. How to load my cd collection from my windows computer to my nano? Thanx

< re-titled by host >

Import iTunes library, click hereand follow the instructions.

(142174)

HP connection manager exe. Could not load the Assembly system.data, Version = 1.0.61.0, culture = SQ Lite...

have new laptop dv7 and continue to receive the window... HP connection manager exe.

"Cannot load the Assembly system.data, SQ Lite, Version is 1.0.61.0, culture = neutrral, db937bc2d44ff139 = public key token.

The application will now exit.

Please identify your laptop / pc

Look at the basic/back/side of the pc/laptop to the sticker with barcode.

Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

#Do not post not the serial number of your product because it is private and considered to be personal information. ###

Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

Not showing information as requested could delay our responses and troubleshooting slow the question that led you to create a thread. We want to help you, so please help us help you.

Have you gone to your laptop's web support portal and tried the HP software box software?

This would certainly be a good starting point.

Removing and reinstalling the software HP Connection manager is also a good plan. It is also located on the web portal of support for your laptop.

Best regards

ERICO

Manage selection lists - how import/load a Select lists?

Similar Questions

Maybe you are looking for