Diagram on how to load envelopes

Similar Questions

• I have a hp printer and cannot figure out how to load envelopes size 10 for printing

  I have a hp printer and cannot figure out how to load envelopes size 10 for printing. Any help would be appreciated.

  Hello HeidiZarecky,

  You can follow the instructions in this document to load envelopes for your printer.

• How to print envelopes on the HP OfificeJet Pro 8600,

  Hi people there;

  Recently I came across many people ask how to print envelopes in the printer even the HP Officejet 8600

  Do about it that I decided to provide the two statements in this document as well as the links in the article where I want to talk about the information. That way people who want whether fast and accurate to achieve by reading and following this article and all folk wanting to maybe dig section will provide more in depth information

  This is how load envelopes;

  
  

  I'll give you the link of the Article where this information was collected

  
  

  http://support.HP.com/us-en/document/c02890475

  Here the steps to load envelopes on the Officejet pro 8600.

  
  

  1. Grasp the handle at the front of the tray and then pull the tray toward you to open it.

  2. Figure 12: Pull the feeder

  3. Slide the width guides to the paper as much as possible.

  4. NOTE: If you load a larger size paper, pull out the extension of the tray to extend the status bar.

  5. Figure 13: The input tray Extension

  6. Insert envelopes in the center of the tray with the flap of the envelope on the left and upwards. If the valve is on the short end of the envelope, insert the envelope in the center of the tray with the flap towards the product and upwards.

  7. Figure 14: Envelopes of load

  8. Slide the paper width guides are against the edges of the envelope. Make sure the envelope is centered in the status bar.

  9. Push the tray into the product until it snaps.

  10. Figure 15: Push in the tray

  11. Remove the extension on the output tray the tray.

  12. Figure 16: Take out the tray extension

  It's the explanation on how to load envelopes into the 8600. Hope is useful

  Now check that the use of envelopes are supported by the printer,

  This article will provide you also with the support of the envelopes by this printers;

  http://support.HP.com/us-en/document/c02858465

  Is an important to properly load envelopes for use only envelopes supported by the printer.

  you could spend countless hours trying to figure what the problem is without realizing that the issue is the envelope that you use actually is not supported.

  
  

  Here is a list of envelopes supported by the Officejet 8600

  
  

  I hope it's to your taste.

  RobertoR

  ▼

• How to print envelopes on hp4620? ERR message is 4620 only prints on paper 11 "

  "HP officejet 4620 rejects envelopes w/err message"only draws on 11"paper".  I use Windows Vistas os

  Hi loud.

  Welcome to the HP Support forums.  I understand that you encounter an error when you try to print envelopes using your printer Officejet 4620.

  The steps on how to load envelopes, then print to them be found in your user's Guide.  There are instructions for Windows and Mac.  "Printing on envelopes" starts at the bottom of page 32 and continue on page 33.   You get the error message makes me believe that the correct paper type was not properly chosen via the software program you use and the instructions in the User Guide should help you solve the problem.

• How to print envelopes from word 2010 on a HP Officejet 6700?

  A very simple and stupid question, I guess. What is the best way to load envelopes for printing on an Officejet HP6700? Thank you. When you load the envelopes?

  Hello

  Please see the link below for how to load envelopes.

  http://support.HP.com/us-en/document/c03069089

  To print from Word 2010

  Open Word > click Mail tab (top) > select envelopes > enter address > Print. (Default envelope size is 10 to change click options and change the size accordingly)

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• How to print envelopes on my Laserjet 200 M276

  How to print envelopes on my Laserjet 200 M276 installed on Windows Vista

  The information below is taken from the document "loading paper and envelopes."  The document can be accessed here.

• How to load my cd collection from my windows computer to my nano?

  I just bought an ipod nano. I am very new to this. How to load my cd collection from my windows computer to my nano? Thanx

  < re-titled by host >

  Import iTunes library, click hereand follow the instructions.

  (142174)

• HP ENVY 7640: How to print envelopes

  How to print envelopes with HP ENVY 7640 e-all-in-one series?

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/product/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268/document/c04339981

  Kind regards.

• HP 4520 Envy: How to print envelopes from a desire 4520

  How to print an envelope of HP Envy 4520?  I did not receive a manual with the printer and the online manual does not envelope printing.

  Hey @MayBailey,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand you are trying to print envelopes from your PC for Windows 8.1 to your craving 4520 e - all - in - one printer. I can help you with that.

  This document describes How to print envelopes from your printer.

  Please let me know if this allows you to print your envelopes. If not then please let me know what happens when you try to print and what programs you print envelopes to and I should be able to help more.

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330

  Hello

  How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330? Found no parameters. I can click on F2, then network and passwords, is this all I could configure?

  OK, I got it - you must click F1 several times when starting system upward!

• How to load Windows "On-screen keyboard" application using LabVIEW

  Hello

  If someone can tell me how to load windows "On-screen keyboard" application using LabVIEW.

  Kind regards

  Bharath

  
  

• How to print envelopes with HP Officejet 5741 #10

  I have a HP Officejet 5741 on my desk and I send all the time correspondence. I need to know how to print address on envelopes #10 on this printer.

  Hey @BlacknGold,

  Welcome to the Forums of HP's Support.

  I see you have some problems with printing envelopes of 10 Windows PC to your Officejet 5741 e-all-in-one printer. I can help you with that.

  This document describes How to print envelopes to your PC.

  Please let me know the results after following the above. If you can print your envelopes, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• How to load a "remote desktop"?

  I need to use something called "remote desktop" but cannot find or understand how to load?  Is this software?  I have to add my windows disk?  Help!

  Read the Microsoft KB article:

  Article number: 315328 - how to use the Windows XP Professional Remote Desktop feature
  http://support.Microsoft.com/kb/315328