Management key id primary auto increment without using triggers

Similar Questions

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• No sequences present in the comparison of two models of auto-increment columns and triggers

  Hi, I'm using Oracle SQL Developer Data Modeler version 4.0.3 and I get the same behavior described in the discussion 9876135.

  Y at - it an update on this issue?

  Thank you

  Hello

  No DOF preview is currently generated differences in properties on the auto-increment columns properties page.

  However, if you create a sequence with the relevant name (and the user as appropriate) in your physical model Oracle, then its properties will be used instead of the ones on the page Auto Increment, and in this case the DOF preview will include the DDL for changes in its properties, e.g.

  FALL OF SEQUENCE "TABLE_1_SEQ".

  ;

  CREATE SEQUENCES "TABLE_1_SEQ."

  START WITH 5

  INCREMENT OF 10

  ;

  If only the increment "by" is changed, an ALTER SEQUENCE will be generated:

  CHANGE THE SEQUENCE "TABLE_1_SEQ".

  INCREMENT OF 10

  ;

  David

• Table of deployment without using triggers

  Hi all
  
  I am trying to run this script:
  CREATE OR REPLACE PROCEDURE att20_procedure AS
  
  CURSOR att20_update IS
  SELECT attribute20
  OF per_time_periods
  WHERE attribute20! = periods_to_go (payroll_id, time_period_id, period_num) FOR the UPDATE;
  
  att20 per_time_periods.attribute20%TYPE;
  
  
  BEGIN
  
  OPEN att20_update.
  LOOP
  SEEK att20_update INTO att20;
  UPDATE per_time_periods
  SET attribute20 = periods_to_go (payroll_id, time_period_id, period_num)
  WHERE CURRENT OF att20_update;
  dbms_output.put_line (' is the new value of the attribute 20 ' | att20);
  END LOOP;
  CLOSE Att20_update;
  
  END;
  /
  
  exec att20_procedure;
  
  To update the per_time_periods table.
  
  But I get this error now:
  
  Error at startup on line 28 of the command:
  exec att20_procedure
  Error report:
  ORA-04091: table HR. PER_TIME_PERIODS is changing, function of triggering/can not see
  ORA-06512: at the 'APPS '. PERIODS_TO_GO', line 7
  ORA-06512: at the 'APPS '. PERIODS_TO_GO', line 29
  ORA-06512: at the 'APPS '. ATT20_PROCEDURE', line 16
  ORA-06512: at line 1
  04091 00000 - "table %s.%s is changing, function of triggering/can not see.
  * Cause: A trigger (or plsql user-defined function that is referenced in)
  This statement) attempted to watch (or modify) a table that has been
  in the Middle being modified by the statement that shot.
  * Action: Rewrite the trigger (or function) so it does not read this table.
  
  I am also using a stored function that was created with the following script:
  
  CREATE OR REPLACE
  FUNCTION periods_to_go (p_payroll_id in NUMBER,
  p_time_period_id in NUMBERS
  p_period_num in NUMBER) RETURN NUMBER IS
  NUMBER of att20;
  
  CURSOR get_remaining_time_periods IS
  SELECT time_period_id, period_num
  OF per_time_periods
  WHERE time_period_id > = p_time_period_id
  AND payroll_id = p_payroll_id
  UNION
  SELECT 99999999 'time_period_id', 'period_num' 99999999
  OF the double
  ORDER BY 1, 2;
  c_grtp_row get_remaining_time_periods % ROWTYPE;
  
  f_last_period_num NUMBER: = 0;
  f_last_time_period_id per_time_periods.time_period_id%TYPE;
  f_end_year_time_period_id per_time_periods.time_period_id%TYPE;
  f_period_num per_time_periods.period_num%TYPE;
  
  
  BEGIN
  
  f_last_period_num: = p_period_num;
  f_last_time_period_id: = p_time_period_id;
  f_end_year_time_period_id: = 0;
  
  FOR c_grtp_row IN get_remaining_time_periods LOOP
  
  IF ((c_grtp_row.period_num < f_last_period_num OR))
  c_grtp_row.period_num = 99999999) AND
  f_end_year_time_period_id = 0) THEN
  
  f_end_year_time_period_id: = f_last_time_period_id;
  
  END IF;
  
  
  f_last_time_period_id: = c_grtp_row.time_period_id;
  f_last_period_num: = c_grtp_row.period_num;
  
  END LOOP;
  
  BEGIN
  SELECT COUNT (*)
  IN att20
  OF per_time_periods
  WHERE payroll_id = p_payroll_id
  AND time_period_id > p_time_period_id
  AND time_period_id < = f_end_year_time_period_id;
  RETURN att20;
  END;
  
  END;
  /
  
  Any help would be greatly appreciated!
  
  Published by: 841780 on March 4, 2011 04:41

  Change your cursor for select payroll_id, time_period_id, period_num and remove the "updates". If none of those are the primary key, select the primary key as well. Then set a variable to periods_to_go (payroll_id, time_period_id, period_num), then update the table set nom_de_variable = attribute20 where primary_key = cursor_name.primary_key.

• White membership auto-play after use triggers

  Hey,.

  In my new website, I use white composition to trigger a banner under the main menu. It autoplays when no triggers are hovered over. But once that hovered on, the banner disappears and automatic playback is cancelled.

  Y at - it an option I'm overseeing or is it just not possible?

  You can visit the Web site at http://www.mozesmedia.be

  Hello

  In the composition options, please try to choose "None" to hide the target and then to get a glimpse.

  Thank you

  Sanjit

• by selecting each of the nth order key without using a rank value

  Hello

  Suppose we have a table of Orders

  create table orders)

  order_no number primary key,

  customer_id number,

  item_id number);

  insert into orders)

  Select 101, 601, 90 of all the double union

  Select 103, 602, 100 of all the double union

  Select 603, 105, 110 Union double all the

  Select 107, 604, 120 Union double all the

  Select double union all 108, 605, 130

  Select double union all 109, 606, 140

  Select 110, 607, 150 Union double all the

  Select 111, 608, 160 Union double all the

  Select 112, 609, 170 Union double all the

  Select 114, 610, 180 doubles);

  How can we take every third order_no controlled key order_no without use of rank and connect function using sql.

  as

  105,

  109,

  112

  can someone please help?

  Thank you

  Max

  How can we choose each third order_no order_no keys without the use of grade -controlled

  Reason is?

  Anyway, using ROWNUM then:

  SQL > select order_no

  2 starting at)

  3. Select order_no, rownum rn

  4 of)

  5. Select order_no

  6 orders

  7 order of order_no

  8    )

  9)

  10 where mod (rn, 3) = 0;

  ORDER_NO

  ----------

  105

  109

  112

• Update field of auto-increment using ASP.

  I use Dreamweaver 3 and created dynamic arrays using the tools ASP. I met a wall:

  When you create a form to a form, how to configure the form to update an Auto-Increment field in Access?

  I have what I think is a good book on Dreamweaver, but this feature is not discussed. If I omit the field of

  the form, he leaves the null field and I get a database error, as I expect.

  Any help or documentation links will be appreciated.

  Joe

  As others have said, the database must manage this area and it shouldn't appear on the form on the page in code that performs the actual insertion or update.

  Do you a little differently depending on whether you use the wizard insert or create the form by hand and then apply the server behavior insert.

  If you use the wizard when you select the fields in the form, make sure that you click the auto increment field, and then click the icon 'less', this it will remove the form and it will not appear in the code generated automatically, leaving MS Access free to manipulate himself.

  If you create the form by hand, do not include a form for the field to auto-increment element, then when you apply the Insert behavior it will not appear in the code generated automatically, leaving MS Access free to deal with himself.

• No start page, Google rises and there is no way out without using the Task Manager.

  I used to get the Google search engine at the start of Firefox, with bookmarks bar in side bars and tool at the top. Now, all I get is a Google search page, with a few buttons on the top like images, etc. There is no way to close the program without using the Task Manager. I downloaded the latest version of Firefox and installed, but the problem has not disappeared. Operating system is Windows XP Professional

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  It is possible that the screen is too wide or too high and bars scrolling down.

  • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
  • Open the system menu of the window of Firefox via Alt + space and see if you can move and resize the window (use the arrows on the keyboard).

  If it works, then first close all other open windows of Firefox and then close Firefox via "file > exit/Quit" to save the setting.

  If the above didn't help then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• multiple selection in listbox without using the ctrl key

  Hello

  I wanted to know if it is possible to select multiple items in a listbox without using ctrl or SHIFT key. I write code for a touch screen application and you want to activate the user select more than one entry in a listbox control.

  I saw a similar post that had a solution for a tree control. Is it possible to do the same thing for a listbox control too?

  Pavitra-

  I saved to the audit zip file previous version

• Problems with Vista after disconnecting external USB key without using 'remove hardware safely '.

  A week ago, I unplugged my external Seagate USB drive without using a 'Remove hardware safely' first of my Vista pc.  Since reconnecting the drive, I had a series of problems.  The drive itself seems to be ok.   I am able to read and write to files on the disk.  I'm not able to do is the following:

  (1) open disk management.  It hangs on "Connecting to Virtual Disk Service".

  (2) stopping or starting without windows to snap or take an extra long time to stop or start.

  (3) failed to start Google Picasa3 or Adoble Photoshop Elements 7.  They both hang him.  I am able to use other programs such as Microsoft Office, Outlook, Miro, Norton Antivirus.

  Points 1 and 2 above work fine if the drive is not connected.  I plugged the drive into another computer (Windows 7) and ran Seagate disk checking utility.  He came clean back (no bad sectors) so that the drive is NOT corrupted.  (Check of the Seagate utility disk hung on my pc Vista.)   It seems that something related to the disk under Vista service is corrupted.

  I also see "driver has detected an error in the controller on \Device\Harddisk2\DR2." event message for different devices.  I also tried a restore to a point just before that the problem occurred.

  I don't want to reinstall Vista therefore looking for a solution.  Thank you.

  Janis

  Hello

  You can see the two links below, try the given suggestion and check if this helps you solve the problem.

  http://social.technet.Microsoft.com/forums/en/windowsserver2008r2management/thread/8b5d2c5b-C212-4E3F-96e3-91e668d3b178

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/b2b29ed8-f620-4FE1-93b5-8ced0d472aeb

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Run the VO in Bean managed without using any method (written in AM)

  Hello

  JDEV Version 11.1.1.7.0

  Is there ay way to run VO in managed Bean

  (1) the Execuet VO with parameters dynamically

  (2) as OAF in controller we can directly set the parameters and can run the VO.

  In the same way sort there here in ADF to run VO passing dynamic parameters without using the method (Written in AM)

  Thank you

  Venkatn

  Maybe not ideal for designing this, but you can use something like this:

          BindingContext bindingctx = BindingContext.getCurrent();
        BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
        DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
        DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("DepartmentsView1Iterator");
        ViewObject vo =dciter.getViewObject();
        vo.setNamedWhereClauseParam("myDepId",AnyValue);//enter your value
        vo.executeQuery();

• without using foreign key

  use jdev 11.1.1.4.0 using adfbc.
  
  today I work around with foreign key constrainst are in the db table. between parent-child relationship between two fields in a table.
  
  
  without using the dbconstraint.
  
  How can I use the parent child relationship.
  
  What mean average.
  
  without using the foregin db key constraint.
  
  When the deleted parent field means throw child error exists.
  
  How I can do without database constrainst.

  I guess that I have already spoken...
  http://download.Oracle.com/docs/CD/E15051_01/Web.1111/b31974/bcentities.htm#BABHFJFJ

• Extracting data from table without refreshment and without using the tab key.

  Hi friends,
  
  I have a problem I want to extract data from table without discount in the text field without using the Tab key. When I enter a field value any value then the text corressponding should enter into corressponding textfield without using the Tab key.
  
  for example. When I get back emp_id 101 in a text field then first_name and last_name, address would come in to the text fields corressponding without refresh and use the Tab key.
  
  How can I do that.
  
  Thank you
  Maury

  Hi Maury,

  I guess it's similar to: retrieving data without refreshing rather than Re: value of a textfield should enter into an another textfield without using the TAB ?

  If so, the only change you want to bring on the first is to use the parameter "Onkeyup" instead of "onchange" in the 'HTML Form attributes of the element' element.

  Note, however, that the user must move away from the issue at some point (for example, to click on a button), so the onchange will fire anyway.

  Andy

• mobile device of auto incremented field

  Hello
  my colleague needs to establish a mechanism in the mobile device (client lite oracle) where the primary field of a table is automatically incremented.
  
  According to the documentation in order to make that happen consistently, so that all customers can synchronize correctly without ambiguities, we have created a sequence
  through the MDW and attached to the publication. then with synchronization, this sequence has been downloaded to all customers and each has a specified window.
  We assume now that we must create the trigger that uses this sequence to provide the correct primary key field.
  
  lets say that the sequence is SYSTEM names. AUTOINCSEQUENCEA
  the table is named SYSTEM. TABLEA
  and the primary key we want auto incr is named ID.
  
  the trigger that we assume that should look like:
  
  CREATE A TRIGGER SYSTEM. TRIGGERTABLEA
  BEFORE INSERTING
  ON THE SYSTEM. TABLEA REFERENCING NEW AS OLD new AND old
  FOR EACH LINE
  BEGIN
  Select AUTOINCSEQUENCEA.nextval in: double new.ID;
  
  END;
  
  (1) but if I run this from the msql on the client machine (windows mobile device) returns an error "syntax". How can I create the trigger that I need that uses my sequence in order
  to appoint the new values in the primary key (auto incremented field?).
  (2) if I can't make it through a normal sql statement then how can I do?
  
  Thank you

  Finally got the work in the sample. See the example:

  http://www.rekounas.org/2009/10/24/how-to-create-an-auto-increment-field-in-Oracle-Lite/

• Device simulated in MAX, auto test without error and has work Test panels, but is not displayed in the DAQ assistant.

  I am trying to create a development machine, where we can test the new code without using our physical hardware. I followed this guide to set up a system of simulation. I get to step 3.2 b, but the device does not appear in the DAQ assistant. MAX, the device self test and gites calibrated successfully, and when I open the test panels, I see some sort of signal. I guess that's a default entry simulated since I didn't that device to look for anything? Note that two devices, I am creating the show upward into the devices section and Interfaces, but that, even after running auto calibrate, automatic Calibration date is not yet specified.

  

  When I try to test the device and create a voltage according to the guide, I can't see a device in the creator of data acquisition task.

  

  Steps 1 and 2 of this guide are of course met. Step 3 is not, but this is not surprising because a simulated device is in device in any case manager. Also, I'm not under RT, so step 4 is satisfied.

  Someone at - it ideas?

  That would be because the PXI-5124 is a digitizer not an analog input device.  You must use the NI SCOPE not NOR DAQmx driver