Management of the computer instead of Server Manager

Similar Questions

• Windows could not update the Configuration to start the computer. Windows Server 2012

  I am trying to install Windows Server 2012. When installing, I get the message could not Windows Update to the Configuration to start the computer. Installation cannot continue. He cancel the installation. Can someone help me with my problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• using a desktop (enter into the computer) instead of the camera microphone microphone

  using a desk mic /mixer (going into computer) instead of the camera microphone... Why it will work on windows movie maker, but not the player that is downloaded with the lifecam... I missed something? It should be possible for audio professionals who what to mix while here thanks, Bruce, The Big 8 Radio video

  Hello Brucerider ,

  1. Open Sound by clicking on the button start , and then clicking Control Panel. In the search box, type sound, and then click sound.

  2. Click the recording tab.

  3. In the recording tab, change the record imput accordingly to your need and how you want to receive all the sounds on your computer. and then click OK.

  Note! You could have: Microphone, Line In, (these are the two standards you will get) + other tax like other microphone or mixing table, in your camera microphone case (or something similar).

  As you wrote in your post that you are using a microphone, mixer on your computer, and you insert your froum output jack console (console mixer or what you use) microphone input slot of your computer, your recording settings must be set to Microphone.

  Hope this will help you through your problem.

• Hibernate doesn't work, lock the computer instead.

  When I go to 'Market'-> 'Hibernate' on Windows 7, the screen goes black but when I move the mouse, I'm actually on the login with the account screen locked instead of hibernation.

  I have hybrid sleep off, wake up the disabled timers and sleep to work properly...

  The "shutdown/h" command line with administrator privileges translates into 'the system cannot find the specified file. (2) "even if I can see clearly in the directory root of Windows 7 the hiberfil.sys file.

  'powercfg - a' reports that
  "The following sleep States are available on this system: standby < s3=""> Hibernate Hybrid Sleep.
  The following sleep States are not available on this system:
  Standby
  The system firmware does not support this standby state.
  Standby
  The system firmware does not support this standby state. »

  I am currently running Windows 7 with dual boot with Windows XP, hibernate works great under XP but. I've had problems before with hibernate stopped working the day and the computer stops instead, then I did a clean install of Windows 7 and now, this problem occurs.

  System Specs:
  Windows 7 Ultimate
  Intel Atom N270 processor
  1024 MB
  20 GB of free space on the partition Windows 7 OS
  Intel GMA950 graphics

  (PS: Please don't refer me to http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html, these operations do not help)

  Nevermind, I solved the problem.
  Some reason partitions Windows 7 has been marked as active partition instead of the Windows XP partition during the installation. The problem has been resolved with a clean install of Windows 7 with XP partition marked active.

  Thanks for your help, Afzal

• Adjust the brightness of the keyboard of the computer instead of the keyboard?

  Yesterday, I spilled some coffee on my keyboard and the computer works well, but my keyboard does not work.  I bought a wireless keyboard to use and it works perfectly, except that the keyboard of my laptop backlight is always on.  I can't figure out how to turn off without using the f5 and f6, keys that don't work on the laptop, so how can I disable this light without using the keyboard?  F5 and f6 don't work on the original keyboard at all, and on the outside, they do not work to adjust the brightness.

  Try this:

  Go to system-> keyboard Preferences, and in the keyboard tab, disable(uncheck) automatically "illuminate the keyboard in the dark.

• Restart the computer instead of close

  Original title: can't stop

  If I stop or go to sleep or Hibernate the computer restarts

  Hi Merlot00,

  SpiritX offers several solutions to this exact problem on the following thread:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6f622817-9283-4E5C-bffb-3acd774747f8

  Try the steps that are there and let me know if they help!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop was only gave me my uncle. How do I change to say my name on the user login screen, when I start the computer instead of 'Bob '.

  So I just got this laptop from my uncle, and his name is Bob.  When I turn on the computer and need to type in a password to sign in to get to my desk, he says "Bob."  How do I change to say my name... and when I do this it will automatically change my main folder with all my downloads and documents for say my name or if he insists Bob?

  I have not thinl there is no procedure for this, the only solution I know is to create a new account with your desired name, copy all the files and the settings for the new user account if you want, and then delete the original account when you are sure that you don't need more.
   
  Use the procedure on the article if you want to copy files and settings for the new user account.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/is-is/Windows-Vista/fix-a-corrupted-user-profile

• Restart the computer instead of sleep or stopping

  Recently I encountered a problem.  More often than otherwise, when I try to quit or hibernation or put my computer to sleep it will be restart or not go to sleep, but return to the login screen.  I opened the event viewer, and here's what he says:
  "The last sleep transition was unsuccessful. "This error can be caused if the system unresponsive, failed, or power during the transition from sleep loss."
  I wonder if this has something to do with it, and if so, what can be done to remedy this situation.  If it is useful, also said the event viewer:
  Log name: System
  Source: Kernel-Power
  Event ID: 41
  Level: critical
  etc.
  Can someone help me, please?

  Hello iloveJesus.

  Thank you for visiting the website of Microsoft Windows Vista Community.

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ESSO-LM - Installation Package MSI when starting the computer, instead of login

  Hello

  I'm on the migration project ESSO of the V10 V11.1.2.2 customer asked the deployment of the package to the large community of users without user intervention.  Logoff scripts have been changed to remove the old version.  And they already have scripts to run when the computer reboots, as well as during the user logon.

  My question is can I install new MSI packages during the reboot, without user having to connect and wait for the package must be installed after it connect?

  Thanks in advance

  I guess I answered my own question by testing in the laboratory.  I tested the MSI installation when you start the computer up without any problem.  The conclusion, there is NO dependence of the user with the installation of ESSO-LM for the computer to start.  The advantage is to push the installation without the need to have the user performing the installation...

• Is there a way to connect my DV camcorder to my usb port on the computer instead of a 1394 port, that my computer doesn't have?

  My Canon Elura 100 DV camcorder has a usb connection, but Windows will not recognize it when it is plugged into the usb port on my computer.  (The manual Elura says to connect it to a 1394 port)

  Hello

  According to my research, you must use the supplied canon DV cable and use it. Many users is connected it correctly with the usb port. I recommend you contact Canon support on that.

  http://www.Canon.com/support/

  I hope this helps.

• I use a bluetooth headset with my computer. When I use first, the fate of the computer instead of the BT headset speakers.

  How to go to the headphones?

  You check the audio settings in the preferences.

• hear the headphones instead of speakers

  On an Z210 workstation, I plug in a headset to work known with headphones and microphone in the sockets on the front or back and hear the sounds through the speakers from the computer instead of the helmet headset.  Microphone seems to work because the other person can hear me on a gotomeeting.  How to get the windows media player sounds or other programs to send the sounds in the headphones?

  Hello

  Please try the following, first you must remove the audio inputs, you have in Device Manager, which are not NVIDIA. Those who must be related to the NVIDIA video card yo uhave.

  Then, install the following drivers:

  Driver Chipset

  Audio driver

  Let me know if this helps solve the problem.

  Thank you

• View the name of the computer on the Windows 7 Desktop

  The computer name can be displayed on the desktop by changing the C:\Window\System32\en-us\user32.dll.mui to display the name of the computer instead of the build # using PaintDesktopVersion. It's for Windows 7 x 64. I found the instructions of this sub Vista. I tried this edition but the build version still shows.

  Hello

  The computer name cannot be displayed on the desktop by using C:\Windows\System32\en-us\user32.dll.mui.

  There are to many third-party applications available on the market that can give a try.
  
  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Why does sound come out of the helmet, but not from the computer?

  Yesterday I moved something in the audio, and now I can't hear the computer without having a wired headset. And now, when I listen to the videos on youtube, I control the volume of the video from the buttons on the computer instead.

  Hi Andriita,

  -What is the brand and model of the computer?

  -What changes do you have on the computer before the show?

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the Audio troubleshooter and check if it works.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  Make the computer speakers as default audio output device.

  (a) click Start and then click on Panel.

  (b) click on material and audio.

  (c) click on its icon.

  d) under playback devices tab, right-click on the empty space, and then select the show disabled devices and show disconnected devices.

  (e) right click on the computer speaker device and select set as default device .

  (f) after saving the configuration, close the window and check if the speakers work.

  For reference:

  Tips for solving common audio problems

  http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• Can the License Manager load the computer license first, instead of the license based on users?

  We have several machines in the lab with licenses computerized on them and a number of technicians who have licenses based on users. When he signed from time to time as themselves, instead of the generic service account, a technician of the License Manager fits on the machine their user account. Not a problem until they're trying to connect to their own PC again LabVIEW and they get the trial of 14 days notice period.

  Is there a way the License Manager looking for the license to the computer first instead of the user license?

  Thanks for any help.

  Joe

  Hey Joe,

  In the license file on the license server, you may be able to manually change the tag "sort" in the file to change the order in which VLM withdraws licenses. Licenses are checked in descending (2, then 3, then 4, etc.). As a general rule, your license file is set up in a default order, but in special cases like this, it may be advantageous to change the order. To do this, follow these steps:

  1. open the license file with a text editor (such as Notepad)

  2. search for the tag "flows out". For example, the entry "VLM_Core" will sort tag value will appear as "sort = first". Do not change this value. VLM_Core must always be the first.

  3. change the value of sorting tag for the license to the computer named to a value less than the value of sorting tag for the named user license. (for example 'sort = 2"for named computer and 'sort = 3" to the named user).

  4 save the file and reinstall the license.

  Let me know if you have any questions!