Manager downloaded SRS sound now I can't seem to do anything with anything
I tried to download srs, the music thing, he asked what program I should use to open it with, I put the windows media player, because the srs was already on my wmp on my xp, I thought it was the only one to use. now, whenever I try to use other programs as the forge poster or wmp it says wmp encountered an error when downloading. Here is what it says: c:\windows\system32\sdch.eye unspecified error. What can I do about it?
Try to use the system restore to go back before the problem started.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
http://support.Microsoft.com/kb/936212/#appliesTo
Make that mistake in Mode safe mode or with a clean boot?
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135
Have you checked for malware? I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/products/malwarebytes_free
SuperAntispyware
http://SUPERAntiSpyware.com/
Tags: Windows
Similar Questions
-
I downloaded Yosemite and now I can't open CS Production Premium 5.5 at all, I get the message that I need to install the runtime Java SE6 legacy. I am running Java 8 update 25 (later). I uninstalled and reinstalled CS5.5 Prod Prem already again so please do not suggest this. What should I do?
Try to install java link below and try it once
-
need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?
Most OEM computers have a partition on the hard drive, that allows to give it bought as provided. Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup. Look quickly at the first screen that appears, and you could see the key that you press. Otherwise, go to your computer manufacturer's website and download the manual for your computer. Instructions must be there.
HTH,
JW -
I had to wipe my computer and thought that I had backed up my lightroom (lightroom 4). seems there is no back to the top and now I can't seem to re - install as the message catalog is not found. I can re - install?
Hi robbiemac1973,
You can reinstall the Lightroom app 4 from the following link:Download Photoshop Lightroom
However, you will need to start everything as a new catalog.
Kind regards
Tanuj
-
I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. I now want to import photos from my iPhone, but nothing works. Can someone, please?
MacBook Air, OS X El Capitan (10.11.1)
Honestly, this entire thread is a repost of this , I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?
Still no answer...
Have you tried the following:
- Launch Photos manually once you connect your iPhone to the Mac.
- Enter the ⌥⌘S tomato (command-option-S) key combination the sidebar visible.
- Click on the camera in the sidebar when it appears.
Your iPhone shows in iTunes or in the Image Capture?
If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.
- Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
- Try a different USB port.
- Try to force reboot the iPhone.
-
Administrators password has expired and I can't seem to change even with a backup drive
original title: password expiration
OK so my administrators password has expired and I can't seem to change even with a backup disk can anyone help me pleasssseeee!
Hello
· Your computer is on a domain?
If the computer is on a domain, you may need to contact the system administrator for the renewed password.
Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.
"Microsoft's strategy concerning lost or forgotten passwords"Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.
Here.
Re: Admins we can get an ad platform-specific sticky for banners of edge?
-
Installed firefox 31 and now I can't seem to our oracle enterprise manager URL 12 c
Hello
Monday, I've upgraded to Firefox 31 and now I can not connect to our site Web of Oracle Enterprise Manager Cloud Control. I get the following error message:
The secure connection failed
An error occurred during a connection to lmoemxs101q.atl2.dc.sita.aero:7799. The issuer certificate is not valid. (Error code: sec_error_ca_cert_invalid)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
I don't know what to do to get rid of this message. I need to use OEM to monitor our Oracle databases, and I am no longer able to do this.
Help, please.
Thank you
RoyaMaybe you can remove or distrust 'problematic' certificates are part of the authorities and add it again. Please refer to this post.
-
Manager of multichannel sound from / to windows XP Home Edition. Installed on Vista.
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.
If the above fix, try the Vista programs Forum:
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
See you soon.
Mick Murphy - Microsoft partner
-
downloaded the demo, now how can I run?
I downloaded the trial, now how to use it?
Joetex684 if the test indicates that it is expired so I recommend evaluating Acrobat on another computer. You can find more information on the software Adobe to trial has expired at the beginning.
If you are experiencing a different error when you launch or install Acrobat can you please post the error message? What operating system do you use?
-
Windows defender downloaded windows update now I can't use a program called vintrilo
need to get the vintrilo to allow windows Defender to allow this program
Hi Cubbies12,
Welcome to the Microsoft Answers site!1. What is the exact error message when you open Ventrilo?
2 have you installed updates through automatic updates?
3. do you have installed the update manually?
4 is the only update or is there other updates as well as windows Defender?
5. is sound does not completely work?
Add exceptions to windows defender and see if it helps
1. open windows Defender
2. click on options toexclude files and folders
3. click on Add and browse ventrilo (so that it does not analyze the ventrilo windows)
Follow the steps below to check if the Microphone is properly configured and enabled in Vista.
STEP 1
Test for an audio signal1. click on Start, then Control Panel.
2. click on hardware and soundand then click manage audio devices...
3. click on the recording tab.
4. to test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:
* If the gray bars next to the device name turns green, this device is active and an audio signal is passed through the microphone or line-in port. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.
* If the gray bars remain inactive and grey, the device does not have a signal. Leave the record open tab and go to the next step.STEP 2
Update the audio drivers
You can see a front-end port microphone does not work, a recording device is missing in the recording tab, a microphone is not recognized when it is plugged in, or any other problem. There may be updates audio drivers that can solve this kind of problem. Use the following steps to ensure that the audio drivers are up to date.
1. connect to the Internet.
2. click on start and enter the Device Manager in the start search field.
3. click on the plus sign next to sound, video and game controllers.
4. right click on the name of the sound material and select software update of the driver...
5. click on search automatically for a driver updated and wait for Windows to update the driver software.
6 Windows checks a remote Web site to see if the update of the driver software is available.
* If an update is available, let Windows install the update.
* If an update is not available, proceed to the next step.
7. once the update is successfully installed, test the microphone or line like that was made in step 1. If the problem persists, proceed to the next step.You can also browse the links for more information on ventrilo and try to contact them if the problem persists.
http://www.Ventrilo.com/FAQ.php
http://www.Ventrilo.com/about.php
http://www.Ventrilo.com/dlprod.php?id=1Thank you and best regards,
Bindu S Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
Downloaded IE 9, now I can't access printer without blocking out bad internet.whats
Downloaded internet explorer 9. now when I try to print any page he momentaraly close Explorer and will not send notifications to microsoft. What wrong with it?
Hello
This is the performance of vista forum
for expert help with issues related to internet explorer 9 please repost in the sub forums of internet explore
http://answers.Microsoft.com/en-us/IE
If you want to remove ie9 here is the information from microsoft on how to do it:
read below
To uninstall Internet ExplorerThe following instructions apply to Windows 7 and Windows Vista.
Click the button start , type programs and features in the search box and then click the display installed in the left pane updates.
Under uninstall an update, scroll down to the Microsoft Windows section.
Right-click Windows Internet Explorer 9 and click on uninstall and then, when you are prompted, click Yes.
Click one of the following:
Restart now (to complete the process of uninstalling Internet Explorer 9 and restore the previous version of Internet Explorer).
Restart more later (to wait until you stop or restart your computer).
NoteAfter you uninstall Internet Explorer 9 RC, the previously installed version of Internet Explorer will be available on your computer. There is no need to reinstall.
-
Since the new update today, I have tabs. I don't want the tabs. I'm getting a sign on top. i unchecked all boxes under the tabs and options. but stay tabs. claiming under aboutfirefox... Yahoo editon ver 1.7, never had that before... can I uninstall the last update or remove tabs? Win7
Thank you.are you talking about 'Always show the tab bar pref', which has been deleted, however, you can go back through an addon.
-
I just downloaded Firefox and now I can't on my gmail account
When I tried I got a message saying I need to enable cookies and get help from my new browser
Enable cookies by:
Firefox Menu > settings > privacyCookies > Select [x] activated
-
I downloaded a file, but I can't seem to play when I hit the play button.
What I have to do. I closed and reopened the case several times with the same problem, it won't play.
Other files play well or do things you know worked previously also not play when you press the button?
If this is the case, the problem will be that hearing has lost touch with the audio device you have set for reading. Go on Edition/Preferences/Audio hardware and set the device class for the type of pilot - probably your interface uses ASIO only a specialist one, or even if you use just the built in on your computer. Then, go to the drop down menu to playback devices and select your sound card desired among the options on the list. If the device does not appear on the list, you need to go to the menu of audio control for your operating system (Windows Audio control for Windows or the equivalent on Mac OS and re - select your interface as the default device.
If however the other files play, chances are the header on the downloaded file is corrupt and does not give the information appropriate for the file. It might be useful to re - download the file if the corruption happened on download, or else perhaps to analyze the file with something like «Identifier of Portable Audio» If this is a .wav file, you can try to use the file/import/Raw data and play with the settings... even if it can take forever, if you don't have a good idea of the type of file.
Maybe you are looking for
-
HP G009ax: Missing drivers
My bluetooth is not detected by my phone, and it detects my phone. The bluetooth used to work properly in Win8.1, but since I've demoted for Win 7 64 bit, I can't make it work. When I checked the Device Manager, I find a device listed as unknown devi
-
Salellite 5205 S505 CDRW / DVD problem
HelloI have a problem with a CD - RW,-he does ' t burn a cd :(but it reads DVDs and CDsI tried to burn a CD with Nero and got a massage with power calibration error.Do you know how to fix it?Thank you concerningKeczab
-
Satellite A100-847 - replacing a WLan card
Hello I have Toshiba Satellite A100-847. I would change as WIFI card for new with "n" standard.I found some tutorials how to proceed, but it was for Toshiba A105, very similar to my only. I opened the bottom cover where is memory and modem, but I cou
-
Battery on T500 - unusual problem - not in the forum
I have laptop T500 with a battery 6 cells. For some reason, the battery does not charge. The battery on the screen light blinks all the time. I changed the battery but the problem persists, and so I think that it is not the battery. I also checked wi
-
speaker play background music while watching netflix but no voice
I can't figure out why when I watch netflix my speakers produce only background music but no voice