Salellite 5205 S505 CDRW / DVD problem

Similar Questions

• HL-DT-ST CDRW / DVD GCC4244 / reads, but will not write

  Drive is not capable of burning (HL-DT-ST CDRW/DVD GCC4244)

  One or more CD/DVD drives are not capable of burning

  window media had tried problem fix no way updted to windows Media Player 11 it works very well now CDRW/DVD drive isn't reconizes for recording

  in properties I've implemented it see the recording used regedit workedthrough it backup to backup discs

  follow-up of the T

  stanleywright

  E-mail address is removed from the privacy *.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  It will be useful.

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• Reader combo CDRW/DVD GC4244 installed on my Dell Lattitude D820. XP Professional.

  I have a Combo CDRW/DVD GC4244 player installed on my Dell Lattitude D820. I ran the CARPET RUN program in order to help me solve a problem that I am facing for some time now. Previously, I could use this combo HD-DT-ST GC4244 to write CD - RW. Now, the program tells me that it is not able to do... Why? Help!

  Hi ChrisBraeckman,

  1. did you of recent changes on the computer?

  2. what happens when try to use the player?

  3. you receive an error message?

  The article below and run them the fixit tool available, if you have already run the fixit tool is then try the manual steps mentioned in the article below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Also check the condition of the disc on the computer using Device Manager and view details in return.

  How to solve the problems of hardware with Device Manager

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

• CD-RW/DVD problem

  Samsung CDRW/DVD SM - 348B is no longer read discs or recognize a disc in the tray. Microsoft Fix it has not fixed the problem.  All of the suggestions.

  Hi Bahsohpc,

  • You have any third-party CD / DVD burning software installed on the computer? (Like Roxio or Nero).

  Since the fix, it has not helped, you can follow the steps below and check if this can help struggling reading CD / DVD edition.

  You can access the link below and try other steps mentioned in the article outside the race fix tool and check if it helps.

  http://support.Microsoft.com/kb/321641

  If other operations is not enough, you can try to navigate to the following location in the registry editor, delete the upper and lower filter keys filters and check if that helps.

  a. Click Start, and then to run.

  b. in the run box, type regedit, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (c) in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d. in the pane right, look for UpperFilters and UpperFilter keys and select it.
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

  e. in the Edit menu, click delete.

  f. When you are prompted to confirm the deletion, click Yes.

  g. exit from the registry editor.

  h. restart the computer.

  Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article:http://support.microsoft.com/kb/322756/

  I hope this helps. Let us know the results.
   
  Thank you and best regards,
   
  Srinivas R
  Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite 5205-S505 - support wide screen LCD TV?

  I have a new wide screen LCD TV with a VGA port, I connected this with my old Satellite 5205-s505 via the VGA port as the second screen. But it displays 'unsupport signal' on the TV screen.

  Can someone have the answer.
  Thanks anyway.

  Hey,.

  I think that it s according to the external display what resolutions it supports.
  Normally, your computer user manual laptop, you will find a list of the supported screen resolutions and you should check this!

  I also recommend to install the last page of Toshiba display driver.

• Satellite 5205-S505 - how to remove the battery with the damaged battery latch?

  I try to set aside my laptop (satellite 5205-s505) today. But I found that the release latch was damaged somehow. What can I do?

  My seriously damaged lcd. I have method to close the LCD to save energy (just use external moniter)?

  This battery is a very good question. I think you're the first person who asked it.
  If you cannot remove the only way is, I think, to disassemble the entire laptop and somehow free battery.

  When you use the external monitor, you have to use the FN + F5 key combination and switch to an external monitor only. Portable computer's LCD will be OFF.
  You can also check the Advanced display settings. Usually, you can also find settings to define where should be the office.
  Check it out!

• Satellite 5205-S505 - how to install the new OS after replacing HARD drive

  Hello.

  Installed a new hard drive. How to install an operating system?

  I thank.

  Hello

  You have a Toshiba Recovery disk?
  If so, then start on this disc.
  The installation process should start automatically and you must follow the instructions on the screen.

  If you n t have such recovery disc, then you will need to use a Microsoft Windows disk in order to install the operating system.

  Satellite 5205-S505 is a series of laptop Toshiba us and old drivers can be found on the Toshiba U.S. driver page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Drive cdrw/dvd satellite 1950 801

  Where can I find a list of compatible cdrw/dvd player for
  My Satellite 1950 801?

  Thank you

  Hello

  Visit the following site and check what type of drive you have. You can then choose a fitting replace drive!
  http://www.Toshiba-Europe.com/storage/index.asp?nav=Hom&page=Hom&frame=home

• Sat Pro 490xcdt & compatible SD-2212 of CDRW/DVD combo?

  Hi, I hope someone can tell me if a Toshiba CDRW/DVD combo drive (model # SD - 2212) is compatible with a laptop Toshiba Satellite Pro 490XCDT?

  I searched the web and the toshiba FYI compatibility site but did not find any indicating one way or the other.

  Thanks for any help or suugestions.

  Hello

  Well, I put t know if this player is compatible with this unit, but I found other readers that are supported:
  Part numbers: P000242100, P00025200, XM - 1602-B, ZA2000P04

  Please visit this page where I found this info
  http://store.Yahoo.com/priorityelectronics/p0tosapro49s.html

  Good bye

• Samsung cdrw/dvd sm-316 will not read disks

  help with samsung cdrw/dvd sm-316 b, who can not read any type of disc

  Contact technical support Samsuns, read their knowledge base or ask in their forums. And when you do, be more precise that «help with...» »

  This means absolutely nothing.

• DVD problem - all disks blank display

  WIN XP SP3 plus all updates.

  It is a follow-up to discussion groups.

  In December 2009, I bought a new LiteOn IHAP322-22 x DVD.

  I recently used my drive OEM XP SP2 or it to start my computer I get intermittent BSOD so I have been using a disk iso boot if necessary.

  A few weeks later he land at the stop, it is up to the provider.

  Have been able to start the computer without the need of the boot disk, I took the opportunity to make a backup with the new dvd.
  After having done that, I checked to see that everything was safely on disk only to find it's blank - nothing show.  I put the disk in a laptop and all backup files were there.

  I tried different types of discs, DVD video, music video,
  other backup discs and discs of recorded and all text are empty.
  I also checked in the hardware Manager - device working properly - no warning - tried to update driver [Microsoft 5.1.2535.0] but the one I have is - this - no driver for restore.  Tried the troubleshooting and not help.  Uninstall/install any help.  Lite we confirmed, I got the correct driver.

  I returned the object under warranty to the supplier - I have been informed that the dvd was defective - new one sent.

  This has had the same problem as that returned.  NO2 has been collected and even once has been tested and found to be defective - new one sent - same problems - No3 collected and have the same problem as the others.  [Has been said that the next [4]] would be tested before shipping.  No. 4 did not operate either. The box has been opened so presumed it had been tested.

  Upon receipt of each new article I did the following -

  Ckecked in device - no display problem - tried the "convenience store" - negative management.  Uninstall/install driver - negative.

  I tried run/regedit entry-
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  But there is no superior or showing lower filters, so couldn't edit/change etc as per-
  http://support.Microsoft.com/kb/982116

  A ran MS FixIt [could not fix it]

  I deselected the digital audio playback - did not work.  I am informed that this drive does support DAP.

  Whenever I get the same error event-

  Event type: Information

  Event source: redbook

  Event category: no

  Event ID: 10

  Date: 20/07/2010

  Duration: 01:01:27

  User: n/a

  Computer: XXXXXX-166E603

  Description:

  This drive has not been shown to support digital audio playback.

  I tried other FixIt to a Google but nothing works.

  I hope the slave of this latest dvd to another computer soon.

  Damascus

  Hello

  You can Google DVD decoders and find several good ones. One is usually supplied with the system
  or the CD/DVD drive.

  You are right that sometimes it's easier to re - install Windows however most of these CD/DVD problems
  can be fixed in a step or two. Sometimes, nothing works except a re-installation.

  Only you as the person who initially started the thread or a moderater can mark this thread as
  responded. Even if I could score I don't know that if all answers must be marked.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• New burn to DVD problem in EP - 12 - get this error: '.\Vobulator\TitlePlanner\CVOBUPlanner.cpp, line 331. '

  Had problems recently with

  PE - 12 does not project load existing; now are asked to record the trial version

  created by A.T. Romano in Premiere Elements - see the discussion complete

  Saved this project by working from a project file "AutoSave", has managed to 'Turn on' the software and continue this project and launch new projects.

  Now came across this question in a new project when you save a DVD with menus simple, provided... models burn to DVD problem in EP - 12 - get this error: '.\Vobulator\TitlePlanner\CVOBUPlanner.cpp, line 331. '

  Before the "Activation" problem I had burned several DVD with and without menus/authoring...what has changed?

  Any help on this?  I have seen this error on the Adobe Encore forums as well...

  Thank you for your support.

  Mercenary of digital media

  The name never give up...

  a. I have not given up on stop markers yet... Please delete the timeline stop markers and determine if that Vobulator error is always present.

  Have you looked at the spacing between menu chronological markers, set up transitions and titles?

  Thanks for the follow-up. Keep a positive thought for the markers of the judgment in general or too close to the end if this is not the end.

  RTA

• Not work - HL-DT-ST CDRW/DVD GCC4244 ATA Device

  I have a Latitude D820 with a HL-DT-ST CDRW/DVD GCC4244 ATA Device.  The laptop has been updated to Vista XP since more than a year, but the unit has just stopped working a few days ago.  There is no icon for it under 'my computer '.  He turns the drive for a second when I put in a new drive and then does nothing.

  A message in the device properties window says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "when I click on the button"Check for Solutions", a window opens that says"Check for solutions"and then nothing happens.

  If I try to update the driver software I get a message saying "the best driver for your device is already installed."

  I also tried to uninstall the driver software.  Then I removed the unit and succeeded him, which prompted the computer to install the software driver.  I get a message saying "software device driver is not properly installed."

  Can anyone help me get this thing working again?

  
  

• C100 CDRW/DVD-RW driver problem

  Recently, my player is undetectable.  I don't see what this is likely to have changed its status and am also having trouble finding a solution.  The device control panel, the model is:

  HL-DT-ST DVDRAM BGMEA - 4082N.

  Can anyone help?

  I tried drivers.com, downloads.com and I'm wrong.

  Thank you very much.  It is now fixed.