Manager on the source db configuration

Similar Questions

• Impossible to create Instance Source in Configuration manager (BI Apps 11.1.1.7.1)

  Hello

  During Setup, I created an instance of source for EBS R12.1.3 but I logged in customer ODI Studio and by mistake I deleted "Data Server" of topology that I created in the Source Instance creation/configuration on Configuration Manager (CM).

  He was not intentionally by mistake I deleted. For this reason, I am not able to change the source instance. Once I try to edit when I save it pop-up error "" error: ODI-10182: uncategorized exception during repository access. ". ORA-00001: unique force (DEV_BIA_ODIREPO. AK_CONNECT) violated. "

  His was bug, but they fix after ODI 11.1.1.6.0

  (Metalink note

  1- Note 1545938.1 : ODI-10182 and ORA-02292 errors reported after the unnecessary suppression of data store in ODI 11 g integration Interface

  2 BUG

  https://support.Oracle.com/epmos/faces/BugDisplay?_afrLoop=96427980024293 & ID = 13916069 & _afrWindowMode = 0 & _adf. CTRL-State = 1536syzwe9_437

  )

  However, I tried following cases:

  1 - tried to modify an Instance of Source of Configuration manager (CM) but gave me an error: ' error: ODI-10182: uncategorized exception for access to the repository. " ORA-00001: unique force (DEV_BIA_ODIREPO. AK_CONNECT) violated. "

  2 - tried to create a new database server by using the same Instance of Source of Source on Configuration manager (CM). Failed with the error message: "invalid system Source.

  3 - has tried to re-create the same name server given in ODI Studio with the same name. Failed due to the error: "Data Server Alread exists."

  Then without success so far. I'm currently editing source system Instance but so far without success.

  Versions:

  OBI Apps: 11.1.1.7.1

  OBIEE: 11.1.1.7.0

  ODI: 11.1.1.7.0

  Database: Oracle 11.2.0.3

  OS: Windows 2008 R2

  concerning

  Sher ullah baig

  I am SR with oracle and they offered under the solution, I hope it helps someone.

  How to remove a system from source?

  The user interface for Configuration Manager does not include a way to remove a source system. In the page set of Business Intelligence Applications, you can only add or change a source system.

  By manually removing the source of Oracle Data Integrator system and tables in the main database, you can effectively remove a source system.

  To manually remove the source system:

  1. connect to the base of the application through a utility such as SQL * more or SQL Developer, connected to the same user configured in the data source for WebLogic.

  2. find the source of the source system to remove system identification number by running the SQL code following and looking at the value of the DATASOURCE_NUM_ID column:

  SELECT DATASOURCE_NAME, C_DATA_SOURCE DATASOURCE_NUM_ID;

  3. go to ODI Studio and delete the physical schema associated with the source system.

  4. in Studio ODI go to the respective logical schema:

  2.1 go tab flexfield

  2.2 check for data source digital id flexfield to use by default.

  5. in SQL * Plus or SQL Developer run the following statements where the variable binding,: Bind_DatasourceNumId, is set to the value of the identifier of the source system. These SQL statements can also be placed in a script, if necessary for later use.

  DELETE FROM C_DATA_SERVER WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_DATA_SOURCE_DISABLEDOFFR_REL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_EXECUTION_PLAN_FACTGROUP_REL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_LOAD_PLAN_GENERATION_STEP WHERE EXECUTION_PLAN_ID IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN INCLUDING EXECUTION_PLAN_ID NOT IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN_FACTGROUP_REL));

  DELETE FROM C_EXECUTION_PLAN WHERE EXECUTION_PLAN_ID NOT IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN_FACTGROUP_REL);

  DELETE FROM C_SRC_DOMAIN_MEMBER_TL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_SRC_DOMAIN_MEMBER WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_DOMAIN_MEMBER_MAP WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_PARAM_DW_VAL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_PARAM_DW_VAL_AUDIT WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_DATA_SOURCE WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  COMMIT;

  =========================================

  Concerning

  Sher ullah baig

• Pavilion 500 - 206t: Boot Manager does not appear in the sources of boot UEFI

  I had a working system, until I installed Fedora on it...

  I have since removed Fedora, but cannot get the windows partition to start for the life of me.

  In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.

  I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.

  I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.

  formatted fat32 EFI, left the msr as-is.

  C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot

  Creates the via bcdedit boot manager entries.

  I tried:

  1. Bootrec /fixboot
  2. Bootrec /fixmbr
  3. Bootrec /rebuildbcd

  I also used boot bcd with uefi function to copy the files on

  I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.

  Am I missing something for the HP Pavilion?

  Thanks in advance

  Repair of windows did nothing.

  I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)

  Then I deleted all partitions with parted magc.

  Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.

  Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381

  don't worry about formatting new partitions.

  To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq

  After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.

  Then, install windows 10 to get a true EFI boot.

• How to set the parameters of "Configuration ThinPro" via the HP Device Manager

  Hello

  Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from

  ThinPro Control Center-->

  Control Panel-->

  Setup-->

  Configuration ThinPro

  through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.

  I hope that I have forget something or you have another clue.

  Concerning

  Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.

  Concerning

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)

• Configure managed from the administration Console - arguments Java Server

  Hi there;

  I'm setting up a server managed by the administration console and the only element that me up is when I add the following in the sections of Arguments:

  -Djava.protocol.handler.pkgs = oracle.mds .net .protocol ' |' Oracle.fabric.Common.classloaderurl.handler'| ' Oracle.fabric.Common.uddiurl.handler'| ' Oracle.BPM.IO.FS.Protocol.

  Note the command line script used double quotes ("") but the console gave an error - Arguments cannot contain ' "' this seemed reasonable, so I moved the quotes to apostrophes."

  Passage to apostrophes allowed me to work around the error.

  The managed server fails when I start from the console:

  Error message:

  Oracle.fabric.Common.classloaderurl.Handler ' is not recognized as an internal or external command, an executable program or batch file. -It's as if she ignores the values after the apostrophes and the fials.

  How can I configure this setting?

  Note: I am running weblogic 10.3.6 on widows 2008.  It is a SOA managed server, I try to run from the administration Console installation.

  J

  It did not work, I tried all kinds of combinations.  I'm done with the addition of oracle.mds.net.protocol, installation of the service.  Once it is I edditted the registry settings are added the service entrance ana manually the remaining entries.

• displacement of the configurations of lab manager between the ESX server host computers / data warehouses

  Hello

  Is it possible to move configurations of lab manager between the ESX server host computers / data warehouses? I don't see an option in the library & gt; Clone library. Thank you!

  Recently, I used SSMove to migrate our datastore LM set a new LUN.  It's really simple to use.  This KB gives complete instructions on SSMove http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1006694&sliceId=1&docTypeID=DT_KB_1_1&dialogID=8456583&stateId=0%200%209407965

  See you soon

  Paul

• When the Manager of the custom function in a configuration of link file gets error?

  The question she get error when the Manager of the custom function in a config file in the plan to include the link.
  When she went to join the custom function Manager in the debugger, everything is OK.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < configuration >
  < custom function platform = "DotNet".
  library-path="G:\RB1\Include\CustomFunctions.dll".
  Class="Viking.CustomFunctions.CustomFunctions"/ >
  < / configuration >
  
  THS, category and path is correct.
  So is there any problem for < custom function platform = "DotNet"?
  
  OPA version 10.2
  
  OPA error message translated from the Germany into English: Exception has been thrown by the target of a call

  In general, you should not give the full path of the custom function, it should be rather in relation to the project include file.

  for example:
  

  and then make sure that the CustomFunctions.dll file is copied into the project folder until the project is built.

  In addition, if you use 10.2 for a new project, the mechanism that you use is now replaced. An extension of the custom function is the new thing, and it will look much nicer when it is used in the rules. Refer to the section 'Write a Custom function Extension' in aid of developer for more information.

• A simple way to manage destruction in the Source (ORA R12)?

  Hi guys,.
  
  How can we better use OWB to identify the destruction? We use the Ora r12 (Oracle Applications), which has an updated column to identify the updates on the tables. But, how can you guys identify deletions automatically?
  
  We are using OWB 11.2 and 10.2 DB Oracle sourcing

  Few options-

  (1) configuration CDC (newspaper) on the tables you want to capture deleted lines

  (2) triggers is another option but not recommded

  (3) table operation from source to the staging table Warehouse if less your warehouse holds all the rows from the source, but would be very slow for large tables

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• Configuration of the Source of AP?

  Can someone guide me the steps required to configure the AP Source?...

  Hello

  For the Source configuration, use the following navigation:

  Responsibility of AP-> Setup-> research-> Payables. Request for the "SOURCE" type and add it to the line.

  Concerning
  Arun Kumar sahmane
  Apps Associates.
  http://arunrathod.blogspot.com/

  This question has been posted earlier... Please visit the following link...

  Re: AP HAVING/DEBITMEMO CONVERSION of INVOICES

  Published by: Arun Kumar Sahm on August 25, 2008 12:28

• RadioWMPCoreGecko19.dll arose in my download manager, the source file is Firefox.exe. What is this file?

  Norton 360 has popped up a message 'file insight' associated with a file that has been downloaded on my PC. The source file was Firefox.exe, and the name of the file is RadioWMPCoreGecko19.dll
  Some sites refer to this file as malicious, but it seems to me that it is a plugin for firefox extension? Can you explain me this file?

  See also [878063/questions/878063]

• How to get the source of the event of the value property changes of Manager?

  I'm relatively new to JavaFX, so maybe that is an easy question to answer. I have created in Java code number (for example, 5) ChoiceBox instances. I add a handler for when changing the value of the ChoiceBox. My code:
  

  ChoiceBox<String> rpmSelector = new ChoiceBox<>();
  ObservableList<String> rpmSelectorItems = FXCollections.observableArrayList();
  rpmSelectorItems.add(ALL_RPM);
  for (Double engSpeed : engSpeeds) {
      rpmSelectorItems.add(String.format("%.0f", engSpeed.doubleValue()));
  }
  rpmSelector.setItems(rpmSelectorItems);
  rpmSelector.getSelectionModel().selectFirst();
          
  rpmSelector.valueProperty().addListener(new ChangeListener<String>() {
      @Override
      public void changed(ObservableValue<? extends String> obsValue,
              String oldValue, String newValue) {
         // How can I get the ChoiceBox that was the source of this event?
      }
  });

  My question is: in the method "changed", how can I determine which of the ChoiceBox bodies had its value changed?
  
  Thank you!
  
  Chris
  
  Published by: 976245 on May 15, 2013 13:05
  
  Published by: 976245 on May 15, 2013 13:05

  Make final rpmSelector and you can refer to it in the ChangeListener.

  final ChoiceBox rpmSelector = new ChoiceBox();
  ...
  rpmSelector.valueProperty().addListener(new ChangeListener() {
    @Override public void changed(ObservableValue obsValue, String oldValue, String newValue) {
       System.out.println("Value changed to " + newValue + " for " + rpmSelector);
    }
  });
  

  You can also pass the choicebox that the listener is for the ChangeListener manufacturer and store:

  final ChoiceBox rpmSelector = new ChoiceBox();
  ...
  rpmSelector.valueProperty().addListener(RpmSelectorChangeListener(rpmSelector));
  ...
  class RpmSelectorChangeListener extends ChangeListener() {
    final ChoiceBox rpmSelector;
    RpmSelectorChangeListener(ChoiceBox rpmSelector) {
      this.rpmSelector = rpmSelector;
    }
    @Override public void changed(ObservableValue obsValue, String oldValue, String newValue) {
       System.out.println("Value changed to " + newValue + " for " + rpmSelector);
    }
  }
  

• I need to find the source file or registry that creates "Services" Exceptions in the firewall of Windows XP when the system is restarted.

  I have a boot sector virus (Troj/MBroot-H) that I can not remove from my computer without losing access to my HARD drive due to a custom boot partition.  I can't afford to repair or replace the computer I have at the moment, so I try to disable things as much as possible to neutralize this virus.  I have already downloaded Malwarebytes and analysis had revealed 18 registry viruses and files that have already been removed from the system.  The HelpAssistant account and its files have been deleted from the system.

  The only thing left to change is the firewall of Windows XP.  I currently have to restore Windows Firewall to its settings by default whenever I restart my computer because the virus has configured the system to add more 'services' and 'management' objects in the list of Exceptions whenever the system is restarted.  If I don't do that an outside source will invade the system via remote desktop and add the HelpAssistant account and the file.  I need to know how to replace system orders that creates these objects for additional exceptions during the restart.  I want to restore full contol on the firewall of Windows XP by allowing not exceptions except those I choose.  Is there a Window XP Firewall registry key or file that can be removed, replaced or changed to keep these elements to be added to the list of exceptions?

  Thank you

  Spacejunkie1

  The computer is still severely infected and you will not be able to "establish complete control over the firewall of Windows XP". Backup your data and do a clean install of Windows. I understand that you do not want to hear this, but it is, IMO, the answer. Please specify your first sentence if you need assistance.

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  MS - MVP - Elephant Boy computers - don't panic!

• WRT54G wireless did not cooperate with the automatic Wireless Configuration

  Hello! I wonder if anyone can help me spot the problems I have here: for a while it was not too much a problem, but whenever I try to view the list of wireless networks, it gives the "Windows cannot configure this wireless connection. If you have enabled another program to manage this wireless connection, use that software. "I went in to find records WZC served and I unchecked/checked the option again to make sure it wasn't a source of the problem. Yet whenever I open the "Wireless network connection status" window I only gave 2 options on the tab. The general tab and the Support tab. The third tab is missing, one that would allow me to check the option to let Windows configure my wireless but I can't seem to be able to bring this tab back anything. Any help is appreciated a lot everyone, please and thank you!

  That's the answer. It's something with XP that requires more troubleshooting. If other computers can connect, the router should be fine.

  In any case, can you check the manufacturer's website if they have an updated driver for your wireless network card?