Managing storage with subparts

Similar Questions

• Manage storage to iCloud

  My iCloud storage is almost full.  When I go in managing storage in System Preferences/iCloud, I have 1 GB in iMovie.  When I go to iMovie on iCloud.com, it has no icon in iMovie.

  How can I find on what is stored in iMovie.  I can't determine the iMovie application and since there is no iMovie on iCloud.com icon, it doesn't seem to be a way to know what are the files/folders.  I don't want to delete the documents and data until I know if it's something I want to discard or save.

  Hello DaveH123!

  Thank you for using communities of Apple Support. It seems that you are short on storage iCloud and can not find the culprit to iCloud.com. You did a good job trying to find what is stored in iCloud to iMovie. After some research, here is what I found.

  iMovie for Mac: use iMovie Theater with iCloud

  You can find which movies you downloaded from iMovie to iCloud in iMovie himself, using the above article.

  Have a great day!

• There is a problem of storage with the data path [path to hard] store

  I have two sites connected by using a VPN connection over a WAN link. In each site, I have an esxi with several VMS host and operation of replication device of vSphere (v 5.1.1.0 Build 1079383) in each site. In each site, these is also a vCenter server with the device of RVS registered and logged with the other site. All the virtual machines are configured to replicate to the other site.

  In my initial configuration of the RV (first install) site remote had 2 vNIC used for the management and I figured it was my problem with replication (see kb2040302). So I have changed since my host configuration from the remote site to have that single vnic management (does not solve the problem). I then registered, removed and reinstalled the VR device without change to the problem.

  What is going on:

  1. I am able to configure replication between sites without a problem.

  2. first replication occurs between sites and reports a success.

  3. the remote VM replication to the main site continue to work properly and all is well for the days and continue to work.

  4. the main site of VM replication to the remote site fails on the second and all attempts to reproduce the error. There is a problem of storage with datastore path '[datastorename] '.

  

  I followed the advice of kb2040302 better as I can. But I must confess that I could use some of the more detailed instructions on how and what site should I check the logs. and how to check my configuration management vnic.

  I'm looking for someone provide additional troubleshooting steps with good detail.

  Thank you

  
  

  Resolution:

  The problem was caused by a security setting on the NFS Server data store. VRA could not delete the (hard).

  Specifically, my problem was with authorizations on the Synology NAS under the application of the "file Station.

• My phone 16 gig is constantly low on storage, well all I can see to manage storage is < 2 GB of music, mail, photos and applications.

  My phone 16 gig is constantly low on storage, well all I can see to manage storage is < 2 GB of music, mail, photos and applications.

  Open iTunes on your computer, and then connect your device to your computer. In iTunes, select your device. You will see a bar that shows how much storage your iOS content uses, divided by type of content. Roll your mouse over a type of content, as well as other applications, to find more information. If storage is not yet put in correspondence to the top, then back up the phone via iTunes or iCloud, wipe the phone to the factory settings and restore your information. That should erase all ghosts who gets up on the device.

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support

• Managing servers with virtual IPs / hostnames does not start

  Hi all
  
  I installed a cluster of OSB in load balancing and a load-balanced SOA (10.3.6) on two separate servers.
  
  -Server Admin SOA (runs on the server #1).
  -Server Admin OSB (runs on the server #2)
  
  I am using virtual hostnames for my managed servers of SOA and OSB, as follows:
  
  -Server of OSB managed #1: OSBHOST1VHN - ip: xxx.xxx.xxx.xxx (runs on the server #1)
  -Server of OSB managed #2: OSBHOST2VHN - ip: .yyy (runs on the server #2)
  
  -Server SOA managed #1: SOAHOST1VHN - ip: www.www.www.www (runs on the server #1)
  -Server SOA managed #2: SOAHOST2VHN - ip: zzz.zzz.zzz.zzz (runs on the server #2)
  
  -The BAM server managed #1: BAMHOST1VHN - ip: nnn.nnn.nnn.nnn (runs on the server #1)
  -The BAM server managed #2: ip: zzz.zzz.zzz.zzz - no name virtual IP here (runs on the server #2)
  
  I was able to start/stop the admin server managed nodes on each server so far Manager.
  Everything works great until we decided to stop the machines to add more memory.
  After the reboot, the servers admin started but not servers managed.
  Well, all the managed servers with vIPs failed, but the BAM #2 server started without any problems.
  
  For other servers managed, I get the following errors in the log files.
  
  # < 20 nov. 2012 15: 56 GMT > < error > < statistical ALSB Manager > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 9583013bf964d764:32a0a378:13b1e86ef73 :-8000-0000000000000010 > < 1353426960019 > < BEA-473003 > < server of ' Agra delegation not available. Cannot get the aggregator distance
  java.rmi.UnknownHostException: could not find URL for the server 'ms_prd_osb1 '.
  at weblogic.protocol.URLManager.findURL(URLManager.java:145)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:120)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:76)
  at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$ 000 (ALSBStatisticsManager.java:38)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager$ RemoteAggregatorProxy.send (ALSBStatisticsManager.java:55)
  at com.bea.wli.monitoring.statistics.collection.Collector.sendRawSnaphotToAggregator(Collector.java:284)
  at com.bea.wli.monitoring.statistics.collection.Collector.doCheckpoint(Collector.java:243)
  to com.bea.wli.monitoring.statistics.collection.Collector$ CheckpointThread.doWork (Collector.java:68)
  at com.bea.wli.monitoring.utils.Schedulable.timerExpired(Schedulable.java:68)
  to com.bea.wli.timer.ClusterTimerImpl$ InternalTimerListener.timerExpired (ClusterTimerImpl.java:254)
  at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:531)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  
  # < 20 nov. 2012 15: 56 GMT > < emergency > < security > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000015 > < 1353426963376 > < BEA-090087 > < bind to the configured Admin port the server failed. The port may already be in use by another process. >
  # < 20 nov. 2012 15: 56 GMT > < error > < Server > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < DynamicListenThread [Default] > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000016 > < 1353426963376 > < BEA-002606 > * < cannot create a server socket to listen on the channel "Default". The 172.17.241.93 address may be incorrect, or another process is using port 7000: exception java.net.BindException: cannot assign requested address. > # < 20 nov. 2012 15: 56 GMT > < critical > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963377 > < BEA-000362 > < server failed. Reason: The server doesn't have to bind to any port can be used. See the log for details message. > # < 20 nov. 2012 15: 56 GMT > < error > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963387 > < BEA-000383 > < is not an essential service. The server will shut down >
  
  I tried to ping my vHOSTS:

  ping OSBHOST2VHN

  I managed to fix my VIP, so I guess they work properly.
  I checked the etc/hosts, and everything is set up correctly.
  I also checked config.xml (which I have not modified) and everything seems correctly (host, servers, IP, ports,...).
  
  The only one that has changed since the rebooted server is the setDomainEnv.sh in which I modified Xms and Xms values to increase the heap size.
  I only changed it on a single server to check if the settings we correctly applied.
  
  Can someone help me with this?
  
  Edited by: user13619168 Nov. 21. 2012 08:09
  
  Edited by: user13619168 Nov. 21. 2012 08:10
  
  Edited by: user13619168 Nov. 21. 2012 08:16
  
  Edited by: user13619168 Nov. 21. 2012 08:17

  seems you use duplicate port numbers, would you please change the port and make sure that it is not in use by any other process. hope this will help.

  -Negi Mukesh
  http://weblogicserveradministration.blogspot.in

• Low cost storage with replication of table

  Alrighty, I hope this one gets a few good answers.  I have a friend of mine who is looking to start its virtualization of its current server room.  Now this isn't something fancy at all I think the more they can be to virtualize servers 15 + and they want to be able to have things like the DRS/HA and so on.  Now the big part of this is we are eager to have a kind of replication in the case of a DR.  Storage with what they will probably be software iSCSI due to further reduce costs.  Now, I have some experience with the help of Open Filer but from my research, I could not know how the functionality of replication table or much less put in place.  I have also worked with HP Lefthand, but I'm not sure of the cost through a license and so on. After virtualized local storage would be best for us to go with regard to budgeting and so on.  I expect comments and recommendations and your experience with storage solutions the.  Appreciate any feed back!

  Kind regards

  Chad King

  VCP

  "If you find this post useful in anyway please give the necessary points.

  Hello chadwickking,

  Falconstor solutions http://www.falconstor.com/ do you check or Open-e? http://www.open-e.com/

  Perhaps this product can help you.

  
  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  Best wishes / Saludos

  ________________________________________

  Ing. Diego Quintana ! http://www.images.wisestamp.com/twitter.png! [! [ http://www.images.wisestamp.com/linkedin.png!: http://ar.linkedin.com/in/diegoquintana]

  vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  UNETE al grupo Virtualizacion Español en LinkedIn

  My Linkedin profile

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• How are they managing storage Flash on my Macbook Pro?

  Hello, I have storage problems with my macbook pro, simply because I miss. I went through and eliminated a lot of my videos and photos because that's mainly what I use this for, but my storage is full. How to clear up the flash storage?

  For the other category in the display of information storage, see this support article. If the display appears to be inaccurate, try to rebuild the Spotlight index of the boot volume ("Macintosh HD", unless you have given it a different name.)

  Empty the trash if you don't have it already done. If you use iPhoto, emptying his trash internal everything first:

  ▹ iPhoto empty the trash

  In pictures:

  ▹ Show of the recently deleted ▹ file delete all

  Do the same thing in other applications like Aperture, with an internal feature of the trash. Then, restart the computer. Temporarily, which will free up space.

  According to the documentation from Apple, you need at least 9 GB of free space on the boot volume (as shown in the Infolog) for normal operation, not the mythical 10%, 15% or any percentage. You also need enough space to allow the growth of the data over. There is little or no advantage in terms of performance to get more free space than the minimum Apple recommends. Storage space you'll never use is wasted space.

  When Time Machine backs up a Mac laptop, some free space will be used to make a snapshots the, who are backups of deleted files recently. The space occupied by the local snapshots is declared as available by the Finder and should be considered as such. In the view of storage of the information system, snapshots appear them as backups. The snapshots are deleted automatically when they expire or when free space becomes less than a certain level. You don't need to usually and should not, remove snapshots them yourself. If you have followed the bad advice to disable snapshots the running a shell command, you may have ended up with a large amount of data in the other category. Ask for instructions in this case.

  See this support article for some easy ways to free up storage space. A common waste of space is old backups iTunes to mobile devices. As shown in this support article, select the devices tab in the iTunes preferences window, select the backup that you want to remove and click on delete the backups. Keep at least a backup of each device you use yet.

  You can, if you wish, use a tool such OmniDiskSweeper (ODS) to explore the volume and discover what is take up space. You can also delete files with it, but not unless you don't know you know what you remove and that all data is stored safely. This means that you have several backups, not one. Note that the ODS only works with OS X 10.8 ("Mountain Lion") and later versions.

  IMPORTANT: This comment is neither a recommendation nor an endorsement of any third party software. You should always do your own research to determine if the unknown software is safe and useful. Don't take the word of anyone, including mine.

  Deletion of files inside a photo library or iTunes will damage the library. Such a library should be changed within the application that created it. It is the same for e-mail files.

  Go further than if the problem is not resolved by the steps above.

  ODS cannot see the whole file system when you run simply by double-clicking; He sees only the files that you have permission to read. To see everything, you must run it as root.

  Back up all the data now.

  Install the application in the Applications folder as usual. Quit it runs.

  Triple-click any where in the text line below on this page to select, then copy the selected text in the Clipboard by pressing Control-C key combination.

  security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. You will be asked for your login password.

  The application window opens behind other open windows. When you scan a volume, the window will finally show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.

  I do not recommend that you make a habit of doing. Do not delete anything as root. If something should be deleted, make sure you know what it is and how it got there, and then remove by safer alternatives. If in doubt, leave it alone or ask for advice.

  When you are finished with the app, he quit and also to leave Terminal.

• BlackBerry Desktop Manager incompatible with BT stack?

  I was wondering if last battery installation of BT from Toshiba on a laptop Dell Latitude running stack version 4.00.22 (D) will solve a problem that I found with Blackberry Desktop Manager (6.0) - this Signals that my computer does not support the feature of BT.

  I've read elsewhere that the solution is to replace the battery from Toshiba with the Microsoft drivers, but in doing so, I will lose the other aspects of the BT feature that work well today (such as the audio as connections one headset Skype).
  Update stack of 4.x to 7.x will make a difference? Appreciate any feedback - thank you!

  If you are using the model of Toshiba laptop not for each manufacturer of portable touch software upgrade. Hey should provide updates.
  Toshiba BT stack can be used on laptops Toshiba-no, but you need a valid license.

  Have you contacted the manufacturer of your laptop?

  BTW: you can try to install the latest version and test.

• Low cost intelligent or managed switch with the console interface

  Could someone recommend more low switch cost smart or managed with the interface of the console?

  I only need 4 ports but need to control CLI, telnet, or SSH.

  no downtime

• Why can't I manually manage music with iCloud and Apple active?

  In a previous discussion, the following point kept deployed: "you must disable the iCloud library in settings on the iPhone, and then manage it manually the music and videos option will be available again."

  True, but... WHY? # * % $! ' s sake, I should be able to choose what songs go on my device, regardless of source of the source file. As it is, when I keep iCloud and Apple music enabled on my iPad, I find myself with random files on it which I can't delete until I stopped the two aforementioned services. More than once, my iPad has mysteriously filled to capacity with I not not choose or play music.

  It is a major problem, and it needs to be fixed. Apple, please allow users to control their own devices and files the way they prefer. If I want a song on my device, I'll put it here, my computer, from iCloud, Apple music or from iTunes. I just want to play, I'll listen without downloading it. Period. Any necessary additional complications.

  We are just users like you here in these forums. Apple employees are not allowed to post replies to the messages here.

  You better put your complaints about Apple's Feedback page.

  http://www.Apple.com/feedback/

• How the practice is to use iCloud for storage with a new MacBook Air documents

  I currently have almost 500gig in documents on my macbookpro 2012.  Thinking of getting a new MacBook Air. For storage, I need to iCloud or a external hard drive. Don't want to carry a second piece of equipment, so I think almost any movement to the cloud. It's convenient.  Safe?

  Simply store your 500 GB of documents in iCloud is a space-saving convenience and sharing between or on your Mac (s). It is not a backup strategy because Apple does not archive the user data stored in iCloud. External, 2 TB USB3 drive will fit in the Palm of your hand, weighs almost nothing and ensures that Time Machine is to backup your user data wherever you are. It is the solution that I use with my MacBook Air to 2014, even when sitting in a coffee shop (and using VPN for security). Time Machine also captures Users/yourname/Library/Mobile Documents, which is your application compatible iCloud files and documents.

  As well as a Time Machine backup of this 500 GB of documents, I would like to put them on another external drive that goes on the plateau to ensure the guard. Sometimes external drives completely fail without warning, including two Time Machine disks that happened to me over the past four years.

  If you choose to use another non-Apple Cloud service, read the fine print on this autonomy of providers to transfer data between international servers, and your rights under foreign laws and safety distance will always give you access to your data.

• Managing storage of iPhone for photos

  IPhone 5 s of the my wife says it's almost out of storage (I had to delete the photos and videos and erase the recent album deleted to take some shots). It uses iOS 8 with iCloud photo library and optimize storage is enabled. Can I remove images from the phone and not lose them in iCloud?

  Thank you

  Michel

  PS: storage iCloud still has nearly 16 GB available.

  iCloud Photo library FAQ - Apple Support

• store data in external storage with sbRIO 9602

  Hi all

  Does anyone have experience of sbRIO data storage in an external USB or any other type of storage?

  Since there is no USB port on 9602, I am planing to use for serial ports do.

  But how?

  Thank you.

  Zhuoyuan

  Hi Zhouyuan,

  This wikipedia article on the technical details of SD card is where I got the idea of using the FPGA to speak directly to an SD via SPI.

  http://en.Wikipedia.org/wiki/Secure_Digital#Technical_details

  Unfortunately, I don't know all the technical details that would be involved to make this work, but it seems possible.

  As I said, the SPI interface for SD cards is very low, and develop a functional driver can be difficult.

  In the spirit of brainstorming of ideas... You could create a small logging system compatible ethernet on Arduino.  I searched a bit on Google and found the shield which includes the Ethernet and SD card.  Coupled with the Arduino microcontroller, the device could receive the news of the IMU of sbRIO via ethernet on the robot and save the data on the SD card.

  Both the aforementioned efforts would work, but are less expensive than adding a dedicated SD card module that includes the necessary firmware in its design.

  See you soon,.

• Lolipop 8 7840 place access to storage with exFAT file system

  I plugged an external drive with USB OTG cable, the Tablet detects it but says it is empty or use the unknown file system.

  Is it possible to access the data on the formatted exFAT storage?

  Looks like that it is an unknown issue to the guys at Dell. And what's worse, there is no explicit statement of Dell so 7840 supports exFAT or does not work.

  In anyway, if someone else in need. The problem could be solved to some extent by using StickyMount app, but it requires root and fuse-exfat.