Low cost storage with replication of table

Similar Questions

• low-cost router with DHCP 66 option

  I'll try to find the lowest cost of the Cisco router with option 66.  I use the router in conjunction with spa50x phones and must be able to ensure the configuration at startup.

  I used the srp521.  It was suggested to use the isa550, but who just got an end of LIFE.  All routers of RV supports, I don't the have not found on a rv110 and I know that's not on the rv042.  It seems to me that it is a feature that should be on a router to a small business.

  Sage

  Sage

  I was also looking for a replacement for the SRP521.  I found this in the Guide of the administrator for the RV180:

  

  

  You can also try emulators of RV here, https://supportforums.cisco.com/community/netpro/small-business/onlinedemos.

  Stephen

• Measurement of low-cost input analog (4-20mA) with data acquisition

  Hello

  I would like to have a very low cost measurement system loop which I can plug in my laptop current:

  I have a load, which is connected to a circuit of air conditioning/signal booster, which output a 4-20mA. I want to measure this current loop signal.

  An idea for the lowest cost system? I think that the most NOR DAQ are too expensive and too exaggerated.

  I have LabVIEW.

  Use of remote sensing current low-value resistance, then measure the fall of voltage through it with the help of an acquisition of data 6008/6009?  They have about $150.

  You will probably need to amplify current-sense with a MAX4372 or similar resistance to achieve a result that allows you to use a reasonable scale on data acquisition.  I measure the current through our products in almost all of our equipment to test in this way.  The size of the resistance of meaning as a result.  The 6008 is accurate enough, but it is not the fastest nor well presented.  But starting at $ 150, they are hard to beat.

• Low cost brushless three-phase amplifier

  I use cRIO to request control phase brushless motor three specialty.  NOR has a NI 9505 module for control of motors brushed.  I have not found one for brushless motors.  There are a lot of controllers of third brushless motors integrated in the market.  Will not work for me.  I need to directly control the cRIO output transistors.

  I guess I'm looking for a low-cost three-phase bridge amplifier.  The low cost is necessary because it will be part of an OEM product.  The engine is rated at 40 volts and 10 amps.

  Does anyone have any suggestions?

  Here files gerber and the source files of origin for the Council that I built.  It was designed by EagleCAD, and the final design is drive1.brd.  I don't think that there is an error with this review of the Council, it should be good to go if you built it this way.

  Others that some of bridge-on-chip solutions that I found, there was no option for the units silent, low-power (disks without built control logic in).  Because I wanted to do my own development of control algorithms, it meant that I had to either crack open a trade route or build my own.  Of course, I went the second route.

  Good luck.

• There is a problem of storage with the data path [path to hard] store

  I have two sites connected by using a VPN connection over a WAN link. In each site, I have an esxi with several VMS host and operation of replication device of vSphere (v 5.1.1.0 Build 1079383) in each site. In each site, these is also a vCenter server with the device of RVS registered and logged with the other site. All the virtual machines are configured to replicate to the other site.

  In my initial configuration of the RV (first install) site remote had 2 vNIC used for the management and I figured it was my problem with replication (see kb2040302). So I have changed since my host configuration from the remote site to have that single vnic management (does not solve the problem). I then registered, removed and reinstalled the VR device without change to the problem.

  What is going on:

  1. I am able to configure replication between sites without a problem.

  2. first replication occurs between sites and reports a success.

  3. the remote VM replication to the main site continue to work properly and all is well for the days and continue to work.

  4. the main site of VM replication to the remote site fails on the second and all attempts to reproduce the error. There is a problem of storage with datastore path '[datastorename] '.

  

  I followed the advice of kb2040302 better as I can. But I must confess that I could use some of the more detailed instructions on how and what site should I check the logs. and how to check my configuration management vnic.

  I'm looking for someone provide additional troubleshooting steps with good detail.

  Thank you

  
  

  Resolution:

  The problem was caused by a security setting on the NFS Server data store. VRA could not delete the (hard).

  Specifically, my problem was with authorizations on the Synology NAS under the application of the "file Station.

• Restore with replication of vSphere

  Hello

  We use SRM 5.1 with replication of vSphere.

  I'm trying to get a rough idea of how long a reprotect operation would take after a failover, especially synchronization of storage.

  The manual says that:

  
  "The full synchronization that appears especially in the stages of recovery performs control totals, and only a small amount of data is transferred over the network."

  However in my testing this step still seems to take a long time to complete.  For a person of 50 GB, it takes 40 minutes.  My question is: what is the bottleneck here and I can speed things up?

  In a live scenario, I have much larger comments VMs and I fear that a reprotect could take days to synchronize the storage.

  Thank you

  Steve

  The full synchronization bed basically just for the disk data and checksum data. It also makes requests to read the data and return a set of checksums remotely. He would only send the data if the checksums do not match. Thus, assuming that not many disk changed, there is very little except checksum travel over the network. So you will respect especially how fast you can read files vmdk on both sites and to a lesser extent by the latency of the network between the sites, and, of course, if the link between the sites remains upward.

  Check if the link to the sites is good. Get often ignored or not connections are limited somehow? The latency is extremely high, as hundreds of milliseconds? This can slow things down.

  On the source site, make sure that the storage is not overloaded with other work. In the case of NAS/ISCSI, check also that there is no other work of network hogging bandwidth. Sometimes, there are periodic offers on secondary sites, like backups, and that people often forget this can be a lot of resources.

  On the destination site, carry out similar checks and make sure that the server VR is to get a reasonable amount of network and CPU resources.

• ORA-39060: one or more tables has declined due to conflicts with the main table

  Dear all,

  Currently, I have problems, I try to import the entire schema

  bash - $3.2

  bash - $3.2 impdp dumpfile = PRODDUMP BALL/BALL_BALL@BALL. DMP DIRECTORY = DUMP_DIR FULL = Y LOGFILE = IMP Log REMAP_SCHEMA = BALL: BALL REMAP_TABLESPACE = BALLDATA:BALLDATA

  Import: Release 11.2.0.3.0 - Production the my Sep 30 15:28:08 2013

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, Automatic Storage Management, Oracle Label Security, OLAP,.

  Options of Data Mining and Real Application Testing

  ORA-39060: one or more tables has declined due to conflicts with the main table

  UDI-31626: operation there was error ORACLE 31626

  ORA-31626: there is no job

  ORA-39086: cannot retrieve information about jobs

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 3326

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 4551

  ORA-06512: at line 1

  Any solution please

  Hello

  You can use the view:DBA_DATAPUMP_JOBS

  then use the table as drop statements

  drop table . purge;

  HTH

• lower costs

  Hello

  I have a PalmOne, Zire 31. Looking to download games while I'm waiting at the Office of the drs (so to speak). If the package saids its its for Palm OS - is - it say that it will work for my pda--thank you very much for your help...

  Hello darlened and welcome to the forums of Palm.

  Most of the time, if an application or a game is written for Palm OS 5, it will work with your Zire 31.  That said, the Zire 31 is a Palm device low cost and has all the same features of the more expensive Palm PDA Tungsten E2 and TX.

  I suggest that you download and install the version of a demonstration/test before buying it and confirm on the website that the Zire 31 is supported.

  Alan G

• best component of data to deal with the mysql table

  Hello.

  I have an LMS (learning management system) with a lot of info in a mysql with a few tables dbb. I also use a lot of php.

  They said data flash components are not the best in the world so what do I do?

  Partyman said I should use Flex data components as they were built for this sort of thing and are much more powerful. So where can I get me one of those for the IE: do I have to download something that I only have Flash Cs5.5. So how this component in flash?

  Or would it be better to use a third-party plugin for display of the tables. Someone mentioned that excel and the PivotTable is amazing and simple.

  At the end of the day, I want to also customers can see a dashboard.

  Oh, and I missed the other parts of your post.

  There is no silver bullet in AS3 in terms of getting data unless your application is made in the AIR. If your applications are webgame - you must always write the data on the server layer to return with subsequent SQL queries feeding the data components.

  As far as databases Excel vs goes, DBs are much more powerful than the storage and data recovery facilities.

• The AEC to Flash 10.3 is available only for low-COST airlines?

  Hello

  I wanted to know if Flash 10.3 AEC function is only available with ACC?

  The AEC swc file I see everywhere is one ACC. Are there the playerglobal.swc specific non - ACC or can we use the swc even where we develop a custom application and not by low-COST airlines?

  Any help is very appreciated.

  Thank you.

  LiveCycle is a Java server that you can integrate Flex. The same playerglobal.swc is used in Flex and Flash. Download the latest (FP11) http://www.adobe.com/support/flashplayer/downloads.html

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• Registration of the companies low-cost (RTMFP vs protocols RTMP/S)

  Hey everybody,

  I read through all http://learn.Adobe.com/wiki/display/LCCs/LiveCycle+collaboration+service and read through the forums (even in the FMS side that may be relevant http://forums.adobe.com/message/3345179#3345179 and http://forums.adobe.com/thread/736733 ).  As recording LCC is in beta is missing the right docs for now.

  Could you guys validate/invalidate my hypothesis on the registration of low-COST airlines:
  Note: we require Flash 10.0 and connect LCCS SWC (flash 10.0) currently

  (1) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMFP" / > will do the following:
  (a) causes a P2P multicast (which in turn uses UDP and no communication at the service of SUPPLY) between customer sovereign Fund, which means no is / V record steam.

  (2) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMPS" / > will do the following:
  (a) cause a TCP via server companies low-cost that will record the A / V broadcasts very well.

  3) what I'd do if we wanted to take advantage of P2P multicasting during the recording of the session of the ACC?  To do something like: http://forums.adobe.com/message/3345179#3345179 ?

  4) according to this: http://learn.adobe.com/wiki/display/lccs/09+Peer-to-Peer+Data+Messaging+and+AV+Multicastin g that we could make the P2P with Flash 10.1 multicast
  (a) maybe I am completely wrong in #1 and #2, and by requiring Flash10.1 for our application, I get the recording work using the RTMFP Protocol?

  Thank you
  Alex G.

  Hi Alex,

  OK - now, when you make P2P RTMFP streaming,

  recording does not work. To work around this problem, we recommended

  either disable RTMFP either by setting StreamManager.maxP2PStreamPublish to 0. In

  the latter case, you would still use RTMFP and UDP and so get most of the

  benefits.

  Answer each of your questions:

  (1) partially correct - RTMFP is required for P2P streaming, but not all

  RTMFP streaming is P2P. For example, once there are more than 3 beneficiaries.

  We automatically hub-and-spoke, because P2P becomes difficult for

  the publication server. You can control this threshold using the

  StreamManager.maxP2PStreamPublish.

  (2) correct. This is a temporary workaround solution - I prefer the 2nd

  workaround solution, using StreamManager.maxP2PStreamPublish = 0, which still allows

  the benefits of RTMFP without using P2P. In the next version, even if you are

  you use RTMFP, once you turn on the recording, he will argue as well

  all broadcast on hub-and-spoke (without change of RTMFP).

  (3) for the moment, there is no way to do P2P streaming with record

  permit. In the future (probably much later), we might have time to allow

  This, but it is quite difficult (perhaps not even possible) and it is not high

  as a priority.

  (4) it is important to separate these issues - requires no P2P RTMFP

  streaming. In fact, most of the benefits of RTMFP (mainly the fact that)

  It is based on UDP) works on the star network. What we have seen is that Multicast

  P2P (activated in 10.1 and rather than direct P2P) is often not a great

  choice for conversations, because multicast introduces a latency more than

  simply using hub-and-spoke.

  hope this helps,

  Nigel

• How to ensure that no data is ever stored on the servers of the low COST airlines?

  In particular, I would like to use the SimpleChat and SharedWhiteboard in a secure application and will not have any data stored on the servers of LCCs (only used to manage the flow of data). At least, I don't want to have data stored between sessions, but the 'sessionDependent' of these two pods property doesn't seem to work (ie. when the value 'true' history of cats and forms of Whiteboard are preserved between sessions).

  I put in a few hooks to clear both at the end of the session and the start of a session, but what I really want, is to ensure that the data never be stored in the first place.

  Is this possible with these pods, or do I need Custom develop something on my own to support this behavior?

  Thank you

  The data are stored only in memory. When "persistent" we check the configuration node and transitional so we don't save this node on the disk.

  If you're really worried about a security breach, you should probably encrypt your messages before you send them through companies low-cost (it should be easy to subclass the current models and encrypt/decrypt points on the fly).

• What are the costs associated with the synchronization

  What are the costs associated with the synchronization

  Simple answer is: No. Cost zero.

• My phone 16 gig is constantly low on storage, well all I can see to manage storage is &lt; 2 GB of music, mail, photos and applications.

  My phone 16 gig is constantly low on storage, well all I can see to manage storage is < 2 GB of music, mail, photos and applications.

  Open iTunes on your computer, and then connect your device to your computer. In iTunes, select your device. You will see a bar that shows how much storage your iOS content uses, divided by type of content. Roll your mouse over a type of content, as well as other applications, to find more information. If storage is not yet put in correspondence to the top, then back up the phone via iTunes or iCloud, wipe the phone to the factory settings and restore your information. That should erase all ghosts who gets up on the device.

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support

• Move cluster configured with replication SRM and Vsphere

  All,

  We go 2 groups in the near future to achieve a geographical distance between the 2 sites.

  A cluster is equipped with VMware 5.0 replication SRM and vSphere and the other cluster running VMware 5.5 and SRM in combination with replication of vSphere.

  What is the best way to move these clusters, I must stop the replication or interrupt the replication process and are these action to perform on SRM or we need to perform any action on the virtual machine itself?

  I read that a stop is setting the State to not configured including destroy all files in the target directory.

  Does anyone have an experience by physically moving a cluster managed by SRM (and replication of vSphere)

  Any help is welcome

  Thank you

  Gerbert Coolen

  Just pause replication before stop you the VR device on the site target/DR. stop vs break with vSphere replication - VMware vSphere Blog - Articles from VMware