Managing Web only in VM Server 2?

Similar Questions

• Where to manage Web Oracle Conference?

  Hello
  
  I installed the Suite of Oracle collaboration for the first time and I have to configure Oracle Web Conferencing. I can't find Console I can manage Oracle Web Conferencing.
  
  After installing Oracle Collaboration Suite, I can only find Application Server Control Console. I went through this Console, but in this Console, I could not find Web conference options.
  
  Please tell me I can open this link to set up conferences to the Admin of the site Web and also tell me what I need to download client tools for web conferencing etc...
  
  How can I check if Oracle Web Conferencing is installed on my system or not?
  
  I need to download components seprate Web Conferencing etc.?
  
  Please help me and answer me soon. Would appreciate the instant answer...
  
  
  Kind regards
  Saami

  You should:
  -first to enroll a user as an administrator (Administrator of the company)

  http://download.Oracle.com/docs/CD/B25553_01/RTC.1012/b25460/postinstall.htm#CIHDBBFF

  -and then to connect to OCS Webconf with this user

  With all that you follow, you should drop a look on Administrator's guide OCS Web conf

  Kind regards

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• Error when you join only on this server

  

  Error when you join only on this server

  Hello

  Issues related to servers Windows are best addressed in the TechNet forums. Post your question on the forum.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• The Task Manager will not open in Server 2003

  I'm troubleshooting why the Task Manager does not open in Server 2003.  This is an option when I right click on the taskbar, but when I click on it it does not open.  I try to type taskmgr.exe in the command run and it says "windows cannot find taskmgr.exe.  Make sure you typed the name correctly and then try again. "I found the .exe in the system32 folder, but the same message appears when I double click that.  I'm currently updating the pc with all the updates of windows that I can.  I tried to go to gpedit.msc in user configuration\administrative templates\system\ctrl + alt + del options but "remove Task Manager" not was set up be it, enabled or disabled.

  You have posted in forum for Windows Vista operating system. You need to display in place in one of the Server on Technet forums. The usual cause of not opening Task Manager is infection then you need to start troubleshooting with it.

  TechNet forums - http://social.technet.microsoft.com/Forums/en/categories/ MS - MVP - Elephant Boy computers - don't panic!

• Is there a web only subscription for Adobe Acrobat?

  Is there a web only subscription for Adobe Acrobat or you need to download software on your computer?  I'm a Chromebook and want to subscribe web only for Adobe Acrobat.  Thank you!

  Hi KatherineEncoreCPA,

  Acrobat is a system application not a service based on the web.  However you can use Acrobat online via web PDF converter online, convert the web or Acrobat Reader | Adobe PDF Pack

  KB doc. to help https://helpx.adobe.com/document-cloud/help/using-pdfpack.html

  Kind regards

  Nicos

• Call to Web Service of Oracle PL/SQL not to call the Web service in SOA Server

  Hello

  Try to call the Web service to oralce pl/sql function

  created a function

  Unable to invoke the web service from the server of the SOA.

  CREATE or REPLACE FUNCTION HelloWorld_WebServices(S_STRING Varchar2) RETURN VARCHAR2 as

  Server sys.utl_dbws. SERVICE;

  APPEL_ sys.utl_dbws. CALL;

  service_qname sys.utl_dbws. QNAME;

  port_qname sys.utl_dbws. QNAME;

  response sys. XMLTYPE;

  application sys. XMLTYPE;

  BEGIN

  sys.utl_dbws.set_http_proxy ("hostname: Port'");

  service_qname: = sys.utl_dbws.to_qname ("ns1", "process");

  Server: = sys.utl_dbws.create_service (service_qname);

  APPEL_: = sys.utl_dbws.create_call (server);

  sys.utl_dbws.set_target_endpoint_address (APPEL_, ' http:/host name: port/soa-infra/services/OFS/HelloWorld/helloworld_client_ep ');

  sys.utl_dbws.set_property (APPEL_, 'OPERATION_STYLE', 'process');

  asks: = sys. XMLTYPE ("< ns1:process xmlns:ns1 ="http://xmlns.oracle.com/OFSOrderServices/HelloWorld/HelloWorld"> < ns1:input > < / ns1:input > < / ns1:process > '"); 

  answer: = sys.utl_dbws.invoke (APPEL_, request);

  return response.extract('//HelloWorld/child::text() ','http://xmlns.oracle.com/OFSOrderServices/HelloWorld/HelloWorld'). getstringval(); 

  DBMS_OUTPUT. Put_line ("values of the OutputsVariables8");

  -Of return ';

  END;

  Run - the code below:

  Select HelloWorld_WebServices ('Hi') to double;

  Error:

  ORA-29532: Java call terminated by eception Java exception: java.lang.NoClassDefFoundError

  ORA-06512: at "SYS." UTL_DBWS', line 403

  ORA-06512: at "SYS." UTL_DBWS', line 400

  ORA-06512: at the 'APPS '. HELLOWORLD_WEBSERVICES', line 74

  29532 00000 - "Java call terminated by eception Java exception: %s."

  * Cause: A mistake or a Java exception has been reported and could not be

  solved by Java code.

  * Action: Modify Java code, if this behavior is not expected.

  Hello

  Fixed the error

  After loading once again of DBA and network provided access files JAR/JVM firewall

  and the correction on the threshold

  Return response.extract (' / result/child::text () ','xmlns = "http://xmlns.oracle.com/OFSOrderServices/HelloWorld/HelloWorld" '). getstringval();

• Download Adobe License Server Tools? I want to manage licenses using the internal server

  This ticket https://forums.Adobe.com/message/1329254#1329254 , I'm able to download Adobe License Server Tools? I want to manage licenses using the internal server

  Thank you.

  Hi Carol,.

  Please consult the guide for internal tool of license;

  http://www.Adobe.com/UK/eLicensing/LicenseManagement/Alm/PDFs/server_tools_user_guide.PDF

  Let us know if you need more details about your query.

  Kind regards

  Sarika Behal

• How to include Web only in the custom web viewer

  Hi, I have published "renditions" folio iPad being incorporated in a web viewer customized on the website of the company. I created a Web rendering only in order that it appears in the web viewer custom, but rendering of the iPad, it's what always incorporates. It seems that the Web don't watch on the Adobe viewer welcomed Web, not the company site. Is there a different URL to the Web only folio I should use? Where can I find that? Thank you.

  Hi, have confirmed the account where you created a web only rendering has the URL hosting on the Administration page accounts? I wonder if he this interpretation was created using a separate account. In case you haven't seen the devnet article on the web viewer configuring integrated, it's here.

  I'll you private message for more information.

  Thank you

  Brian

• Is - this calculation Manager works only with EPMA?

  It seems calculation Manager works only with EPMA for the application of the classic plsnning, I cannot use the module of business rule and cannot use the Manager of computing to work on business rules, is good? correct me and advise, thank you!

  Sorry I disagree

  You can use the calc for classic version 11.1.1.3 planning
  When you create a planning application in 11.1.1.3 classic, you have the option to choose if you use business rules or calc for the app Manager.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I want to manage my web isa with isa server management.help me how do I make and the port that should be used?

  I have an isa Server 2006
  I want to use the vpn connection and and limit internet access bandwidth:
  1. suggest a pdf for learning about this
  2 - to use web isa management utility which port should I use?

  Ask in the forum ISA Server:

  http://social.technet.Microsoft.com/forums/en-us/Forefrontedgegeneral/threads

• The proSafe (JGS524E + GS116E) Switches: Configuration Management Web GUI in VLAN specific

  Hello

  I use a JGS524E and a GS116E. The two are connected via a 802. 1 q uplink with all defined VLANS in him.

  A 802. 1 q other interfaces goes to a pfsense firewall, which serves as a router and dhcp server for each VLAN that I use.

  How can I configure the switches plug are in one VLAN specific and get his IP address of the dhcp server in this VLAN?

  At present, it seems to be random access: it is not predictable that range from intellectual property, it takes its IP configuration via dhcp...

  How management function works internally?

  Thank you

  Markus

  Hello

  Thank you. I tried it out, but the behavior seems to be a little different:

  I configured a static IP address for the switch (10.1.0.13 / 24). I have access to the switch web gui via the ip address of the host of a host directly connected (connected via a trunk port, where I put 1 VLAN on the trunk), but it is all the same, what VLAN that I use:

  When it is connected to the VLAN 1 I have access, but also through 10 VLANS, VLAN 20 and so forth (assumed, I configure my computer appropriate staticly in the IP network, for example 10.1.0.20 / 24). So it seems not be limited only to the VLAN 1. You have access to each vlan, only the IP configuration must be in the same network.

  I'm not sure, how it behaves when cascading the two switches, I have not tried.

  If this information can be useful for other users with the same question about this switching product line.

  For me, this behavior is not very well implemented from my point of view. For security reasons, you must limit access to the administration, for example by allowing access from a specific hardware port or a vlan. With the effective implementation, centralized management for a cascade topology is not easy to set up, perhaps because the behavior is not very clear and not documented in the manuals.

  Mentioned on the edge: there is no available TLS/SSL encryption when accessing the web gui (not https). So the password is transmitted in clear text... not a very good idea, I think.

  Thanks a lot for your help.

  Best regards

  markusd112

• What is the recommended method to configure a web proxy to another server on the LAN?

  Hello

  I use Server to manage incoming web traffic, but also have another server running I want to use outside.

  I work in directly modifying the site configuration file and adding the ProxyPass and ProxyPassReverse directives but these overwritten when the site configuration is changed in the.app

  I want to implement this in a way that is not crushed and is more robust.

  Any advice would be very welcome.

  Thank you

  Gary

  I'm certainly not an expert in the field, but I think you can do what you're asking using the functionality of the Web application.

  You bring a plist to webapps folder and a conf file in the apache folder and then using.app, edit your Web site, and then click Change advanced settings and select the Web application that you created. It should not then be written more if you make any changes.

  The content of the conf file would proxy information in it:

  # of http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#proxypass

  RewriteEngine on

  RewriteCond% {HTTPS} = off

  RewriteRule. -[E = Protocol: http, E = port: 8000]

  RewriteCond% {HTTPS} = we

  RewriteRule. -[E = Protocol: https, E = port: 8010]

  ProxyPassReverse / http://secondserver.example.com:8000 /

  ProxyPass / http://secondserver.example.com:8000 /

  and the plist would be something like this:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  <!-see the manual pages for webapp.plist (5) and webappctl (8) for more information on this example webapp.plist->

  < plist version = "1.0" >

  < dict >

  includeFiles < key > < / key >

  < table > <! - include files are enabled in the virtual host then webapp - >

  < string > /Library/Server/Web/Config/apache2/httpd_yourwebapp.conf < / string > <! - name must match your conf file - >

  < / array >

  < key > name < / key >

  < string > com.example.secondserverwebapp < / string >

  displayName < key > < / key > <! - name displayed in app server - >

  < string > SecondServerWebApp < / string >

  installationIndicatorFilePath < key > < / key > <!-the presence of this file indicates web app is installed->

  < string > /Library/Server/Web/Config/apache2/httpd_yourwebapp.conf < / string >

  sslPolicy < key > < / key > <! - determines the behavior of the webapp SSL - >

  < number > 0 Integer < / integer > <!--0: by default, UseSSLWhenEnabled->

  <!--1: UseSSLAlways->

  <!--2: UseSSLOnlyWhenCertificateIsTrustable->

  <!--3: UseSSLNever->

  <!--4: UseSSLAndNonSSL->

  < / dict >

  < / plist >

  This is perhaps not completely right, but can direct you in the right direction, I hope that someone with more knowledge will be the chip in the meantime

• Manager profile and updates the server imacs

  We are new to this rehabilitation so much ignorance.  We are implementing in our public library 30 off a server imacs mini mac OS X Server (El Capitan).  We have MDM, VPP and the Profile Manager.  Using the Profile Manager, we can get the updates for the programs Apple or operating system to deploy about 30 imacs.  Imacs keep asking apple ID and should not do.  Since these imacs will be out for use by the public, we don't want people by connecting you with their own accounts on itunes/icould kind are locked down, so the updates that need to be pushed from the server.  We followed all the directions in which we can find, but so far without success.  Anyone know the answer?

  Thank you.

  Susan Dillinger

  Director of the library

  New Port Richey Public Library

  Hi Susan,.

  Welcome to the forums.  If you are one of those borderline cases where the VPP doesn't really help.  As you deploy systems of shared use, and as you said, you don't want visitors enter personal data on the machine that are public terminals, they does not really benefit you in the collapse of the licenses in the VPP program.  VPP works very well if you have unique Apple IDS on each of these devices and each device has a user invited to the VPP.  But, I guess, you have a local administrator account and possible you are exploiting the guest account or using something like Deep Freeze to protect the machines of significant change.  If this is the case, the last thing you want to do is to manage manually 30 Apple ID each machine which means you would end up with 30 catalogues of app store.  Messy.  And very manual.

  You can provide compliance with the VPP program (you have 30 licenses of each application), you will probably have to fudge the distribution of the software.  For example, the last update to iMovie.  You bought 30 Apple machines.  Each machine came with an individual license of iMovie.  You converted to the VPP seats.  Ah, but you do not have 30 users to invite to the program to claim each seat.  I suggest you fudge it a little as you can always stay in compliance.

  Download the update for a single machine.  Suppose that you have a "master".  It could even be your server.  Patch iMovie on this machine.  Then, use a tool like Apple Remote Desktop (retail $ 80 on the App Store) to push the App update for 29 other machines.  The application is nothing more than a bundle of the application.  You don't need to do something special for the app get her as a source in the functionality of the copy of the elements or the ARD.  Now you download the application once on the internet and put it on other devices.  Bind the iApps a identifier Apple is a thorn in all shared device deployments.  The key is to stay in compliance of the software.

  Don't forget.   The Profile Manager is any device monitoring and management parameters.  The Profile Manager can not deliver software to devices.

  I hope this helps.  Looks like a good library to have 30 ready to use Mac.

  If the children are, I would suggest installing zero from MIT, Lego Digital Designer Lego, Meshmixer from Autodesk and even the unity game engine.  All are free tools and can provide interesting opportunities for youth programming.  Scratch for the Foundation in computer programming, LDD for the architect budding in each of us (and it's Lego), Meshmixer is a modeling tool from Autodesk, which is free and the unit for those adolescents who are seeking to build their own games.

  Oh, and you should probably set a firmware password or activate the full encryption of the disk on machines to prevent visitors curious to play with your machines.  Encryption will require a member of library staff unlock the device at each reboot.  Who can get boring.  A firmware password would be only necessary if someone was trying to use modifiers to boot (which is what you're trying to prevent).

  These Macs can open up unimaginable avenues of learning for your community.  Be creative.  Push the limits.  Don't let them collect dust.

  Reid

  Apple Consultants Network

  'El Capitan Server - Foundation Services.

  «El Capitan Server - Collaboration & control»

  'El Capitan Server - Advanced Services '.

• Failed to configure remote web access in Storage Server 2008 R2 Essentials

  I am running windows storage server 2008 r2 essentials. It is my second server. The first I own and been installed without any problems. The other is having a problem setting, web access remotely via the dashboard. Everytime I try to put in place the name domain the wizard fails, and I noticed that the windows server domain name management service stops. What should I do?

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/