Manual definition of the value axis scaling to a script for two or more axes file

Similar Questions

• Programmatically change the name of the value axis on a second value axis

  Hello, I mixed graph signal on which I'm traced two signals.  I created a second value axis, while I have one left and right of the graph.  I am interested in the designation of the value on both axis and were able to appoint only the HR one by using the YScale.NameLbl.Text property.  How can I control the left side?

  Thank you!

  Hello

  You are in the right place, there is a property for this node, I think you should first set the scale is active, then set the property. Sorry I don't have the code I did it at hand for the moment.  It seemed that by using the node property of the top to the bottom, I have would be input to the axis, then change the properties, then another line of entry, change the properties and so on (I did x, but also two Y axis).

• My eos 500 d take pictures to less than the value of the manual and HAVE the value servo... Help!

  Hi all. my camera will not take photos more in automatic mode or manual mode unless I have it HAVE servo value. It will be always filming and take pictures of in this mode. the problem is the same with all lenses. Anyone have any ideas?

  Assuming that you test in Nice bright lighting, it is probably a failure of the lens, but there's a little more tests needed to be sure.  When the appliance is in mode "One Shot" (not in "AI Servo" mode) the camera also uses what is called the "Update priority".  This means that when you press the shutter button to take the picture, the 'priority' is on the guarantee that the camera was focused BEFORE it will allow the camera taking the picture.  If you pass in "AI Servo" mode, the camera switches to what is called the "release priority" (most popular with sports and action).  Priority of release explains that when you press the shutter button... the most important thing is that the camera taking the picture "right now" (if the camera had time to focus or not).

  Once again, you must have enough light to test (outside on a day... that's fine).  Don't test it in dark situations - especially on the subjects of low contrast.

  Please turn on the camcorder in "live view" mode, with the target set to autofocus (AF/MF switch on the position of the AF).

  It to focus and take a picture?

  The reason I ask is because your camera has in fact two independent autofocus systems.  He uses a normal mode (looking in the viewfinder to frame the shot) and the other in "liveview" mode (when using the LCD screen on the back to the chassis so.).

  It is extremely unlikely that two development systems can fail (because they are independent of each other.  The camera uses one or the other, never both at the same time.)  If the camera cannot focus with ONE of these two methods point, then the problem is more likely to be objective.

  The camera sends signals to the intermediate target electronic contacts that you see at the back of the lens.  But the engines are actually inside the lens itself.  If the lens electronics or engine does not then the lens will not focus, and since you are in 'One Shot' with "Priority Focus" mode, the camera will refuse to take the picture because it cannot lock the focus.  BTW... If you pass the lens to position "MF", the camera will still be the shot because the camera is no longer trying to focus.

  If you have more than one objective... try using a different lens.

• Drawn 2 data 2 the value axis on the chart of waveform

  is it possible to put 2 y-axis on a waveform graph?

  1 left and the other more appropriate?

  as I have 2 data sets, A and B.

  I would like that my data is plotted using the left side of the y-axis which is 0.5 to 5

  B data on the right side of the axis y from-25 to 105

  the two using the same x-axis

  I have all the data I need, but now I can only understand 1 tracing of data but not the other I need to be together in 1 graphic data of the two.

  any idea?

  Hi number,.

  did you read what I wrote?

  Right-click on the scale of it, select "double ladder". Right-click the scale newly created, select "Swap" side Right-click the properties of the plot in the legend of the plot and select 'Scale Y'-> 1 scale!

• What is the value axis y axis in the time Panel

  Hello

  I'm a newbie to AE and I came across a sign different time than usual yesterday. I don't know what means the coordinate axis y and how to pass this bizarre situation to the normal layer... I'd appreciate any help and suggestions!

  

  This is the graph Editor. This is a very useful tool to control your animations.

  To return to the regular view, you are used to, click this little graphic icon which is located immediately to the left of the indicator of the timeline at the top of your screen capture.

• Definition of the values of height and width of a clip with XML file!

  How can I specify values of height and width of a clip using the external XML file? The user needs change the values of a specific clip [rectangular] using the xml file.

  How can I do?

  Thank you.

  You have difficulties with what part of the assistance from an xml file to store and retrieve data?  Do you know how to write the values of height and width, in the form of data in an xml file?  It could be something as simple as the following...

  200

  200

• Setting the value of XML in Java script tag

  Hello

  I'm trying to set a value of XML tag in the initialize to a text field event... The code works correctly in FormCalc but I needed it to work in java script.

  FormCalc:

  $record.prospectApplication.typeName = "namedInsured";

  Java Script:

  xfa.record.prospectApplication.typeName = "namedInsured";

  The JavaScript above does not work. Can help any one on this?

  Thank you

  Srini

  Hi Srini,

  In JavaScript you do get all properties by default if you need to say;

  xfa.record.prospectApplication.typeName.value = "namedInsured";

  Who is assign the value to the property "value" not the dataValue object.

• drop table left-right scale of the value axis are not the same scale

  http://img20.imageshack.us/img20/6264/questionk.PNG
  
  the scale of the axis left and right are not the same.
  
  How to configure?
  
  Thank you very much!

  Hello

  Try this
  Chart, Goto Advanced properties-> check the line sync and the axis of the bar
  This will make the two scale of identical values.

  Thank you
  Vino

• How to highlight the value of tracking in java script

  Dear friends
  

  
  

  I learn InDesign scripting.  I have very little experience. I want your help.

  I want to highlight for any value of letter spacing in above + 15 and -15 in Indesign (Cs6) files.

  
  

  Thank you

  Karthik S
  

  
  

  
  

  Hi Karthik,

  Here it is...

  theTextR = app.selection[0].parentStory.textStyleRanges;
  try
  {
  app.activeDocument.colors.item("Overtracked").name;
  }
  catch (myError){
  app.activeDocument.colors.add ({name:"Overtracked",space:ColorSpace.CMYK,colorValue:[15,100,100,0]});
  }
  
  var i=0;
  
  while (i= 15)
  
  {
  
  while (i= 15))
  
  {
  
  theTextR[i].fillColor = "Overtracked";
  
  i++;
  
  }
  
  } else
  
  i++;
  
  }
  alert("The tracking value more than -15  and +15 is highlighted in Red color.");
  

• The value of VM Notes or Description for Standalone ESXi

  Hello

  Is it possible to define the description/Notes field for a virtual machine on a stand-alone ESXi host through powershell cli power? I tried to use set - vm - machine virtual VMNAME-Notes "some_text" - confirm: $false and it can not... It works very well for virtual machines in our Vcenter infrastructure. Problem is that we have some places that are running standalone ESXi hosts.

  Also regarding the custom attributes...

  Are there warnings custody or differences I should be aware of the use of the custom attributes with Vcenter 4/ESXi 4.x and 5.x Vcenter5/ESXi with custom attributes?

  Are there warnings to update custom attributes or the Notes field while a virtual machine is running? I'll add a field by using the script on the site of Alan Renouf.

  Thanks in advance

  As far as I know that is only available when connected to vCenter.

  No warnings to assign a custom to a VM power attribute

• How can I get support for the raw format on Lr 4.4 for Canon 7 d mk2 files?

  IHAVE been download of images from a Canon 1000 d Lr 4.4 with no problems. But I now have a Canon 7Dmk2 and improting images became impossible. When I try, I get a message saying that the files are not supported by the suport of raw format in Lightroom. Can someone tell me how I can get the support of raw right?

  New camera is new file format = need for new software.

  For a built-in 7 2 files support, you need version 5.7 or more recent LR.

  If you want to stay with LR 4.4, you need to download the current DNG Converter and convert the 7 d files manually 2 DNG and import the DNG files into LR4.

• FF restarts after update one opens a new box that says update highly recommended when I click on next FF is unable to connect to the server, it's been going on for two weeks. What continues?

  FF says that an upgrade is available. After that has been done and restarted FF another window opens saying that a very important (urgent) update is nesscary, when I click on the button NEXT, a progress bar appears and says the connection to the server, but NEVER seems to connect, and no matter how long I leave it does NOT connect. It just sits there trying to connect while I use FF.

  Do a clean install (re)-:

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not remove the data of a personal nature if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• How can I make a full copy of the C drive to a smaller SSD for one SSD more?

  My C drive is currently a 149 GB SSD.  I want to replace it with a new, unformatted 256 GB SSD.

  I would like to know 1) if there are specific things to be aware before you format the new drive.

  (2) how to copy all of my current C: drive on the new SSD, and

  (3) how to assign my new, bigger than my C: drive so that I can then format my old smaller SSD as a clean player.

  Rob

  I put the new drive as SATA port 0 (or 1, depending on where your begins).

  You can use Clonezilla to clone:
  http://www.MakeUseOf.com/tag/free-advanced-hard-drive-cloning-solution-from-Clonezilla/ 
  Should work just fine. It will automatically affect the C: drive. Just make sure that it is configured to start first in the BIOS (won't matter on the drive letter, but you don't want a start - they look identical other than the disk space).

• How how to videos from youtube for better play and not load all few seconds? The video clip load and only play for two seconds and starts charging again.

  I have a toshiba laptop satellite 655.

  I have a toshiba laptop satellite 655.

  Hello

  If a YouTube video is slow to the buffering, which is a network related issue and not a system issue. See the article on reading problems: http://support.google.com/youtube/bin/answer.py?hl=en&answer=74662

  Kind regards

  Patrick

• How to add the script sequence to the column in the business component * I have this script for sequence * (CREATE SEQUENCE COL1 START WITH 1 INCREMENT OF 1 NOCACHE NOCYCLE ;)

  Hello

  Take a look at the link below, it gives different ways to use the sequence.

  Using the sequence of database in ADF - Souza Waslley Blog

  https://tompeez.WordPress.com/2011/09/02/using-Groovy-expression-to-set-a-primary-key-with-a-sequence-number/

  http://hasamali.blogspot.com.au/2011/04/ADF-BC-various-way-of-setting-sequence.html

  See you soon

  AJ