Manual focus on the HX 50v

Similar Questions

• The manual focus ring on my zoom EF-S 18-135 lens does not seem to indulge in the optics to change orientation

  The manual focus ring on my Canon 18-135mm EF-S is free to turn if the switch is in the position AF or MF. It does not change the focus. Auto focus works well. Another objective of zoom seems to allow a manual focus without difficulty. What have I forgotten?

  What is the new version of the STM or the old version non - STM of the 18-135?  It will make a difference in the operation of the focus ring.

  If this is the version non - STM (original 18-135), then you should _not_ attempt to focus of the lens manually with the switch auto focus mode AF.

  If it's the version of the STM (new 18-135) then you can rotate the focus ring if the switch of autofocus is AF or MF (but it wont focus unless the unit is on and not asleep.)  For example press the shutter button halfway to reactivate and work the focus ring).

  Most of the USM goals (there is no version of the 18-135 USM) allow the ring to be returned if the device is in AF or MF mode.  The ring is basically a like a sweet clutch and there a few deliberately built sliding- and these rings of just development will keep turns and turns... There is no hard stop for the ring.

• Back button focus with the 6 d

  I can't get the focus of the "back" of my 6 d (AF-ON) button to work.  After you follow the instructions on the Canon Website on how to implement, the right button does nothing.  Auto focus works only with the shutter button.  I have the function set to "P" which I understood to be okay.  Reset the camera to factory would help?  I'd rather not have to send the camera to Canon for repair of a single button.  Case of the unit was bought new and is still under warranty.

  Thank you

  Glad to hear you got BBF put in place. It takes a bit of practice, but soon becomes second nature for emphasis in this way.

  I don't know what you mean by "choice of the AI Servo.

  Are you new on Canon cameras and systems development? Just in case you are...

  Like most Canon cameras, the 6 d has three modes of automatic update: One Shot, AI Focus and AI Servo.

  One Shot is intended for stationary subjects. The update is performed, then stops and locks, and Confirmation of development is given (the Green LED in the viewfinder, red flash of the AF point in the viewfinder, and if it is enabled, the "beep"). If it moves, you or the subject, or if you change the focal length of the zoom, to refocus you must lift the pressure completely on the button update (whether of BBF or a half press of the shutter button), then reapply.

  It is very important to remember is when you use a zoom, since most modern are "varifocale" designs that does not maintain focus when the focal length is changed by zooming. If you use only one zoom, you need either: set the focal length first, before focusing. Alternatively, do not forget to refocus after zooming. Or, use instead the AI Servo.

  Because development stops and locks after that he is suffering from a sudden, it's a good way if you use a technique of "focus and recompose.

  AI Servo is designed for use with moving subjects. In fact, this is the mode to use each time the distance of the photographer and the subject changes for any reason, or if using a zoom and by changing the focal length. HAVE Servo will never block. Constantly, it measures the distance and updates the development, as long as keep you the pressure on the back button or hold down the shutter button depressed half, depending on how you have the camera set up.  HAVE Servo crashes ever, so there is no Confirmation of focus given. You must learn to trust the camera and yourself. It's working properly.

  HAVE unusable Servo with the technique of "focus and recompose", except BBF is used. If the shutter button is always activated AF, it will cause the camera to focus elsewhere, when you try to take the picture after the restructuring. However if using BBF, all you have to do is raise the pressure of your thumb on the button to stop the development, allowing the use of AI Servo with "focus and recompose.

  HAVE Servo is also ideal for use with zooms varifocale... given that the focus is continually updated the focal length of the lens is changed.

  But he can be very good, AI Servo is not quite exact to the One Shot can be. So critical attention, when possible, use One Shot (Note: Live View and separate focusing system used is even more precise, although it is slower.) Much slower on most of the models... 70 D has a new system that improves a little focus Live View).

  AI Focus is not actually a mode of development at all. He is supposed to decide for you, the subject is in motion or not and then move to the use as appropriate: One Shot or AI Servo. Frankly, I almost never use this mode. It may be better with the modern, but older cameras I tried it had a delay while the camera was "decide" mode to use, and which led me to miss some shots. Also, I prefer to choose my own mode of development, and since I use BBF, I can just leave my cameras in AI Servo most of the time. The word 'pro' oriented Canon models (1 d series cameras) have even an AI Focus mode. They have just two: One Shot and AI Servo.

  There are a few "tweaks" to the AF systems, depending on the camera model, for example to set the priorities for follow-up or the ease with which "distracted" the AF system is if something momentarily intrudes between you and the subject.  Consult your instruction manual for that specific adjustment can be made with 6 d... I don't have so can't tell from experience.

  There is a very useful series of three videos on auto focus systems Canon on YouTube, posted by B & H Photo and Rudy Winston of featuring Canon USA... Each video is long about half an hour and the first one is: highly recommended http://www.youtube.com/watch?v=iAx86nblZ2g , watching all three for additional info, even if they are a few years now and don't specifically talk about the focus 6 d system (5 d Mark II and the original 5 d AF systems are quite similar to 6 d, except that they have less than two points and have 6 in option hidden 'help' points available in AI Servo mode).

  I hope this helps.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• My eos 500 d take pictures to less than the value of the manual and HAVE the value servo... Help!

  Hi all. my camera will not take photos more in automatic mode or manual mode unless I have it HAVE servo value. It will be always filming and take pictures of in this mode. the problem is the same with all lenses. Anyone have any ideas?

  Assuming that you test in Nice bright lighting, it is probably a failure of the lens, but there's a little more tests needed to be sure.  When the appliance is in mode "One Shot" (not in "AI Servo" mode) the camera also uses what is called the "Update priority".  This means that when you press the shutter button to take the picture, the 'priority' is on the guarantee that the camera was focused BEFORE it will allow the camera taking the picture.  If you pass in "AI Servo" mode, the camera switches to what is called the "release priority" (most popular with sports and action).  Priority of release explains that when you press the shutter button... the most important thing is that the camera taking the picture "right now" (if the camera had time to focus or not).

  Once again, you must have enough light to test (outside on a day... that's fine).  Don't test it in dark situations - especially on the subjects of low contrast.

  Please turn on the camcorder in "live view" mode, with the target set to autofocus (AF/MF switch on the position of the AF).

  It to focus and take a picture?

  The reason I ask is because your camera has in fact two independent autofocus systems.  He uses a normal mode (looking in the viewfinder to frame the shot) and the other in "liveview" mode (when using the LCD screen on the back to the chassis so.).

  It is extremely unlikely that two development systems can fail (because they are independent of each other.  The camera uses one or the other, never both at the same time.)  If the camera cannot focus with ONE of these two methods point, then the problem is more likely to be objective.

  The camera sends signals to the intermediate target electronic contacts that you see at the back of the lens.  But the engines are actually inside the lens itself.  If the lens electronics or engine does not then the lens will not focus, and since you are in 'One Shot' with "Priority Focus" mode, the camera will refuse to take the picture because it cannot lock the focus.  BTW... If you pass the lens to position "MF", the camera will still be the shot because the camera is no longer trying to focus.

  If you have more than one objective... try using a different lens.

• move the focus from the field to the Manager

  Help!

  I have a HorizontalFieldManager with some fields inside. When I touch on the hfm, I want that he win the tune-up. Everything is fine with the BlackBerry without a touchscreen. I can scroll all hfms.

  But when I touch on the subject of the focus in the hfm gain the focus and not the hfm. How can I change?

  When I want to get the Manager on the ground and give it focus that nothing changes. Call this.setFocus () in the manager didn't make when press the subject field of the focus. When I touch outside the scope of field, everything is fine!

  I have no idea!

  Can someone help me please?

  Concerning

  When the fields are non-Focus, you can still have a NullField focusable.

  a non-trivial alternative might be to manually indicate the development of the manager through the methods onFocus() and onUnFocus() of the field that is getting the focus

• The display area moves and focuses on the object when it is selected

  I recently downloaded 6 Captivate and when you edit a slide if I select a subject it focuses on the object and he spends a large part of the blade out of the display area.

  For example, I'm working on a blade with about 10 possible answers multiple choice quiz and as I change these answers he focuses on the first answer while he is sitting on it. For me change the background display options I manually move the slide because I can see them no longer.

  I'm sure that there is a simple answer, but I checked the preferences, opinions, online forums and I can't find anything on this and it's driving me crazy.

  Thank you!

  Hello

  You can also view > view and then zoom back, to decrease the size of the slide in the main pane.

  Or

  If there is no unexpected behavior when you use the workspace or by using features, you can reset the preferences:

  Here is the procedure:

  Captivate's preferences folder location is:

  [Windows 7: C:\Users\[user name] folder of Captivate 6 \Local\Adobe\Adobe \AppData (hidden folder)

  Windows XP: Settings\Application Data\Adobe\Adobe Captivate 6 record - [user name] C:\Documents and Settings\

  Mac: /Users/ [user name] / Library/Preferences/Adobe Captivate 6 folder

  You will first need to close Captivate 6 and then rename the folder 6 Captivate 6_OLD Captivate.

  Then restart the captivate and check if this solves this problem.

  Re-create the preferences resets all settings and customization of Captivate, but won't have any changes to your project.

  Thank you.

• Sony A77 manual focus

  Hello!

  Just bought me a wich A77 I m very satisfied BUT I have a problem with the manual focus - it won´t work... I put the camera in M mode and return the front dial MF but he doesn´t release the AF motor so I can´t turn the ring on the lens. Have you tried different objectives, out of battery and 10 minutes, resetteng of the factory and so on, but nothing helped. Someone has an idea of what I can do?

  Hello

  Thanks for the reply - sorry for my late reply. I tried with several different lenses, all the same. Finally, I went to the store, they where really confused - had never seen it before so I went with a new camera... this one works flawlessly so I m really happy now.

  Once again, thank you for the reply

• for debugger, shortcut moves keyboard focus to the component source from research

  I'm in the debugger and use the search function to find a definition of the function by pressing ctrl + d. I select the function definition.
  It works great so far, but the focus of the cursor is always in the search window. In general, I now want to set the focus on the source pane (so I can scroll, set breakpoints, etc.). However, I can't find a shortcut to the source window. Y at - it a shortcut or other quick way without using the mouse?

  Thank you
  Ben

  I couldn't find a shortcut or the other, then maybe suggest to add such a feature.

  Firefox Developer Tools ideas - ideas for the development of Firefox tools:

  • https://ffdevtools.uservoice.com/forums/246087-Firefox-developer-tools-ideas

• Is it possible to not only open several tabs at startup, but also focus on the last?

  At the start, I want to focus on the tab on the very good. By default, firefox focuses on the left tab when opening multiple tabs at startup.
  Subject: solution of config?
  tab-mixplus does not help

  Not that I know of.
  Note that you can use Ctrl + 9 to go to the last tab.

  • https://support.Mozilla.org/KB/keyboard+shortcuts

  If you reopen the tabs of the previous session automatically then the focus is on the tab selected when you close Firefox.

• I've just updated to the latest version and now I can not manually type in the URL. I can't get to a new page if I click on a link.

  I've just updated to the latest version of Firefox 32.0.3 today and now I can not manually type in the URL. I can't get to a new page if I click on a link. I had to use - gasp - Chrome just to get to this help page!

  I tried to restart Firefox.
  I can type (not a keyboard problem), but the browser never tries to go to URL, when I hit enter

  Any ideas?

  Thanks - kept looking around and found a rec to make a reset of Firefox. This seems to have worked.

• My iPhone is stuck in headset mode.  It's the THIRD phone that has had this problem.  Why Apple won't be a manual control of the headphone plug in the software?

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  doctortroyp wrote:

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  It is not common in the vast majority of users.

  If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.

  Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• Firefox frequently loses focus of the window

  It seems that Firefox frequently loses focus of the window when I opened a new page. It can be a bookmark, a link open in a new tab using CTRL-click left or whatever. The following scenario always translates into the window loses focus (for me).

  1. Open Firefox.
  2. Open this link and save it.
  3. Close, and then reopen Firefox.
  4. Open the page just a bookmark using the bookmarks list and do not touch the window.

  I read this page a day, so when I launch Firefox and open the page, I click on it in order to scroll, etc...

  Firefox 13, Windows 7 Home Premium 64-bit

  I wish this site had 'Preview' for its positions. Geez Louise.

  This can be caused by a recent update of Flash 11.3.

  See:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  • https://support.Mozilla.org/KB/Flash-crashes-or-does-not-load-Firefox-13
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  You can also try 11.2 Flash you can download it via this link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

• Shuffle all is no longer works, I have to manually advance to the next song or listen to the same song over and over again

  Since the update to iOS 9.3.1 my iphone is more my music mix.  I can type shuffle all, but he played just the same song over and over until I manually advance to the next song.  Any suggestions on how to fix it?

  It's strange because on my iPhone 6 if I hit Shuffle All (at the top - it doesn't matter if my view of my library is on songs, Albums, artists) it certainly mixes between songs and does not play the same song over and over again.

  Just to be sure that we are talking about the same thing-, you tap my music at the bottom of the screen and then click on library above, then press Shuffle All? Because that's what I did and had no problems. Maybe try forced him to leave the music application (double clicking the HOME button, and then drag upward on music app) or even try to do a hard reset of the iPhone (now the HOME and POWER buttons until the Apple logo appears).

• Looking for a peripheral hub funds focusing on the ThunderBolt

  Hello!

  I am currently using my MacBook Pro in clamshell mode in my home office and I wonder if there is a more elegant solution for interfacing with all my devices that I use almost all the ports at the moment!

  I use two ThunderBolt ports to drive two monitors (via a DVI adapter) and via DisplayPort, a USB port to connect to a USB hub, the headphone jack to connect to a set of speakers and, of course, the charger plug. Sometimes I need to use an external lightning drive, but with the current configuration, this would mean disconnecting one of the monitors to do!

  I don't know if such a thing exists, but what can we recommend a hub Office focused on the stroke of lightning that has the following connections?

  -At least 2 taken Thunderbolt

  -DVI output

  -Socket for headphones.

  -At least a USB

  -Ideally Ethernet and the WiFi reception is quite poor at the office and I plan to run an Ethernet cable to my office. Then, it would be ideal to leave the Ethernet cable plugged into the hub, otherwise I would need another ThunderBolt port to use ThunderBolt-Ethernet adapter Apple!

  Furthermore, anyway is the Garland of a ThunderBolt port monitors? The monitors are an Asus PA-238 Q and a BenQ SW-2700PT.

  Thanks a lot for your help!

  David

  http://eShop.MacSales.com/item/OWC/TB2DOCK12P/

  http://thewirecutter.com/reviews/best-Thunderbolt-dock/

• Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

  I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
  Try the following link
  [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

  This may or may not be a problem.
  It's just a suggestion...

  This is a limitation of the works in Firefox.
  
  If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.
  
  You have to click outside the plugin, if you need to use a keyboard shortcut.