Power TC-705

Similar Questions

• is 750ti GTX compatible and easily installable in an ATC-705 EB53?

  need confirmation. is 750ti GTX compatible and easily installable in an ATC-705 EB53?

  live chat was not very helpful. product ID is DTSXNAA028. and the card motherboard intel chipset h81. Thankss!

  sak03,

  You forgot to enter the exact model of your gtx750ti.  There are probably a hundred different gtx 750ti that are different sizes and have different power requirements.

  Here are some tips / the general criteria on the question of if a graphics card will work with your tc-705

  1. is that it adapted?  It is not always easy to determine this.  Often the marketing sheet (dimensions) on sites like Amazon is inaccurate.  We must look on the manufacturers Web site.

  2. your diet has enough power?  If you buy a gtx 750ti which requires a power cable 6 pin, then it won't work with your diet.

  3. will the UEFI card? (most of the 750ti are UEFI and is therefore your tc-705, then Yes, it should be compatible)

  4. do you have a sufficient cooling and ventilation?  I don't think that you will have any problem here because the gtx 750 ti is a map of maxwell.

  On my TC-605, which has the same motherboard Acer/Intel H81 as your tc-705, but probably another case, I installed a graphics card with the dimensions below and he did, barely, with 2 or 3 millimeters to spare.

  

  Most GTX 750ti requires only power 300 watt and power just pull slot PCIe x 16 motherboard.  However, some 750ti GTX also require a 6-pin power cable.  Your Acer OEM power isn't a 6-pin power cable.

  If ever, you improve your diet, it uses a non modular standard ATX power supply.  Most semi-modular power and modular supplys fails in your case because they are a little too big.

  You can try searching this forum also.

  If I was I'm going to buy a graphics card for your tc-705, I would buy the card (GTX950) in the link below and it must adapt... and it's $109 after rebate.  It should also work with your current diet.  The dimensions on the amazon website are inaccurate.

  https://www.Amazon.com/DP/B01FL6SYZU/ref=psdc_284822_t3_B014VHZ4IU

  If for some reason, I needed to upgrade power supply, I would buy the ps in the link below.  It is a very good diet.

  https://www.Amazon.com/SEASONIC-80plus-ATX12V-supply-SSR-360GP/DP/B008XEYT5M

  Important note: ASUS has two gtx 950 minis.  One, it takes a 6 pins and we didn't.  The map link below does not require a 6 pins and so should work with your current diet.

  https://www.Amazon.com/DP/B01FL6SYZU/ref=psdc_284822_t3_B014VHZ4IU

  Edit: It is important that you use the Geforce experience to optimize your game settings... IMO.

  http://www.GeForce.com/GeForce-experience

• Acer computer Aspire to office 705-ATC-UR58

  I bought this from Acer Aspire ATC-705-UR58 desktop computer the day before yesterday.  Twice when setting things up (e-mail, etc.) the computer tells me I have to reboot for updates to take effect.  When I let "Restart" and on restart, I have the Acer splash screen but then the screen turns white.  There is no light hard drive so I can't say whether or not something is whatever it is.  I waited for 5 or 10 minutes looking at a blank screen, but nothing happens.  I learned that if I turn off, unplug at the back, reconnect all cables, I can then power on and everything works fine.

  I found only this to happen during a "Restart" and so far, the not it only from a cold start.  I saw there is an update of the bios of some Aspire laptops had this problem but I apparently have the latest bios.

  Acer computer Aspire to office 705-ATC-UR58

  Windows 10

  Intel I5 processor

  Thanks for any help

  jshe

  JordanB and others who responded to my call for help.  I FOUND OUT WHAT WAS WRONG!

  In my previous post, I said I was taking this back for Exchange in the morning.  I uninstalled my e-mail, the OpenOffice, the chrome and the printer.  Deleted all my personal information, bookmarks and documents and was about to get ready to fight to the top when I but I would try one last thing.

  I took another monitor and plugged in and it works perfectly every time now. The monitor I was using was a VIZIO that served with 2 different workstations and expands the display for your laptop.  He worked to find on those, but it won't be on this Acer.  I hooked a Viewsonic and it makes all the difference.  The two monitors are the same size, same resolution.

  I reinstalled everything now to how I had it and it still works perfectly.  I rebooted a dozen times and never had a glitch.

  I am happy and thank you for your help.

• Using Tc - 705 Gpu Upgrade from Acer

  Hi, I'm planning on upgrading my Acer tc-705 with a MSI gtx 750ti. I had hours, or weeks of research to see if this card will work with my pre built PC or not. I came to the conclusion that it will work, but its better to upgrade my diet sooner rather than later. Can I have a second opinion here on the Acer of the community site. You think I can run this card for at least 6 months? I have a 60 (tha1) fsp 300w PSU 300 with 8A on the 12v1 rail and on the 12v2 14A. I'm more worried about the power but then all thoughts will help!

  A few people have reported that the 750ti and everything worked fine with this exact power on the same motherboard.  The power should be fine with FSP 300W.  I have this too (and same motherboard) power and torn on what to do.  I went before and just updated food... i. e I chickened out.  I found a Seasonic 80 450W more gold on a Black Friday for shipped $53,00 sale.

  The fan on my FSP 300W began to have a little (not really loud but boring high tone) so it was not so difficult to pronounce in the end.

  I don't know the size of the map whether MSI version if it will fit or not...

  Edit: but I did not buy the 750ti

• HP Elitedesk 705 LTS G1: pcie intel 6205

  After installing an Intel 6205 802.11 PCIe Wireless card in an HP Elitedesk 705 G1 SFF PC, the pc does not start upward.   It gets to the Windows startup screen and restart again.    This will be repeated this constantly until the power is off.   The pc works fine when the card is removed.   I tried several maps and several computers of the same model, and it does the same thing.   We just started to use the 705 Elitedesk.   6205 wireless cards worked well in other models of PC.   Anyone had similar problems?

  Hello

  You cannot use the card that is not in the list:

  http://h20195.www2.HP.com/v2/GetPDF.aspx/c04330394.PDF

  Integrated Broadcom NetXtreme GbE; Intel I210 - T1 PCIe GbE (optional); Intel Wireless - N PCIe 7260 802.11a/b/g/n (optionally); HP (2 x 2) 802.11a/b/g/n wireless dual band Mini card with Bluetooth® (optional)

  Kind regards.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• [Power Mac G5] Type of liquid cooling system?

  Y at - it anyway how to determine type of LCS just by looking at the case?

  We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

  But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

  So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

  Thank you...

  Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

  The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

• Exceptional activities related to power

  After that 5-6 years my MacBook battery needs service, classified as a replacement of the battery, but until I get my new battery... Please help me this is my only machine for everything I do. Recently, I see unusual activity on my MacBook, which associated powers and may be the charger cable, for example today when I connect the charger, the led light with a delay also after a few movements on cable!

  When LED on, after a few minutes, 35% collected on the status, LED changed to green and status of load emissions MacBook: 37% charged battery, then return to the normal load State!

  It is only linked to the battery mode or should I concerned about port and MagSafe charger cable? I have fixed my cable charger broken 7-8 months ago and it has worked very well.

  Thank you

  Kind regards

  Hey there alpha120,

  I understand that you are experiencing some problems with the power of your MacBook. While it looks like a spare battery is a good option for this behavior, you can also try a SMC reset:
  

  Reset the management system (SCM) controller on your Mac - Apple Support

  Thank you for coming to Apple Support communities, let us know if we can be of further assistance.

  See you soon.

• Activate App stuck on waiting and power Mode low does ' t

  Hi all

  I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

  I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

  The only way to update/install the app's iTunes download and synchronize.

  The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

  I already have backupped & restored several times, but nothing has changed.

  How can I solve this?

  Thank your

  Best regards

  Hello Axoduss,

  Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

  Great job to the backup of your phone and restore. It's a great way to help solve these issues.

  If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Let us know if that helps.

  Take care!

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Power point

  Is there an outlet, especially for iMac computers or do you have to buy a Microsoft Power Point program which is compatible?

  Yes, there is a PowerPoint for Mac available from Microsoft.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• Watch OS shows 3 past mode of power with almost total of battery reserve

  Hello world

  I have a problem since I updated my watch to watch OS 3. Watch (series 1) goes into unexpected battery power with an almost total reserve mode. It produces one or two times a day and the only thing that I recognize that the watch remains black when I look at my wrist. It shows only the time in green numbers when I press a button and I need to reboot by pressing the two buttons. After the reboot, the watch displays + 80 or even 90 + % battery life and it works as expected for the rest of the day (if is not the same problem from happening again). Especially my battery is 50 + % at the end of the day.

  Today I reset the watch and recovered from backup, but that changed nothing. The watch went to the mode of power with a range of 78% a few minutes ago

  I am really frustrated because it happens very often and I could not find a solution to this problem. Decommissioning watch OS 2 is not an option...

  Thanks in advance for your help, I am really stuck on this issue.

  Best regards from Germany,

  Matthias

  Hi, Matthias

  If your dial of the Watch includes the complication of the battery, it is possible that accidental screen interactions are causing your issue.

  Tapping on the complication battery indicates the level of battery with a large button to put the watch mode of power reserve.

  You can consider using your watch for a while without this complication on the face of the watch to see if the issue is recurring:

  Change the face of the watch on your Apple Watch - Apple Support

• iPad power Switcj

  On my iPad, the power as well as the blow of unlocking button do not work. How can I solve this problem?

  Take it to Apple for a free estimate, or call them and arrange for express service. It cannot resolve hardware problems yourself. You will need to get a replacement from Apple. Apple does not repair the individual components like that, they replace the whole device with a service unit. If you are in warranty and parts failures were due to a manufacturing defect, it would be free. If out of warranty or if the failures were due to accidental damage or misuse, the elimination of guarantee fees apply.

  iPad repair - official Apple Support

• Power cord for my iMac has crunched, how do I get a new one?

  What I do my power cord for my iMac has been chewed and I don't know if I can claim the title of the guarantee or if I should just buy a new...

  As I can use it only if I put in some way and cannot be pulled.

  If the plug of your end iMac has this form:

  

  Then the power cord to any standard computer work.  It may not be

  White enough with the beautiful fitting molded but it will work.