Photon: Notification light works not properly.

Similar Questions

• Example of blackBerry Notifications hub works not properly

  I tried to create a simple notifications webworks app that invokes a callback when an element is selected in the notification Center. In other words, I create a notification without a target so that when open my application will receive a notice as long as I have a listener attached to the event "called". All this is described here. Even if the notification appears in the hub opening he didn't call my reminder.

  I was sure that I was doing something wrong, so I checked the example of notification BB10 webworks here and deployed. It did not work either... The only change I had to do was to replace the inclusion of webworks library ( ) to the most recent a (1.0.4) as the application would not be executed otherwise.

  Is this a bug? Or I'm doing something completely wrong?

  If someone comes across this, the solution was to add the invoke parameter in the config.xml file

  
      APPLICATION
          
              bb.action.OPEN
              text/plain
          
      
  

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lighting effects not working not properly

  Hello

  I am new to the forum and would like some advice as to why my light do not work on CC. The effect does not appear to occur when I clicked OK. So I can't see what is happening and can not change the size or terms of the circles, they also appear only when I left click and then disappear again. He does not do what it is in the tutorials I watch.

  I followed some advice and updated my drivers, went into preferences and performance and found that the CL has not been highlighted so cannot select. Check also that I am 8-bit.

  I am quite new to this, so don't know if I'm missing something. I use this on a Samsung notebook Pc, 1 year and a half old.

  Any help would be greatly appreciated,

  Thank you

  JO

  Try resetting your Photoshop preferences. For 2015 of CC:

  It helped me when I was not able to adjust the handles on the circle.

  

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• HP envy 15-j104sl: display not working not properly

  Hello

  I have a Hp Envy 15-j104sl, unfortunately after a fall, the screen does not work properly: sometimes, the left part or the entire display turns white and it is impossible to use it unless I move the screen / hinges in another post.
  The glass is not broken, I think the problem may be in the base/hinges lower/some other type of contact works not very well.

  I am really disappointed with the online Hp support: I can't find location to send my laptop for repair, and I can't even call help if I have my warranty has expired.

  It's a bad display cable or possibly the display panel. It's going to not need a repair by a technician. Where do you live (country)? I'm not clear if you say your warranty is or has not expired?

• Since the update with OS 10.11.6, flash not working not properly

  Just got a new Mac Book Pro, new on mac in general. Had a video to play on a Web site but didn't work not, downloaded Chrome, worked well. Then made the update to OS 10.11.6 (not), and the video does not work (it says: cannot load the Flash plug-in). Made sure plugin has been enabled in my Chrome. Tried to download Flash himself, tried to remove Chrome and Flash and download Chrome still once, nothing works. Now for some reason, it works... What is (and was) happening... Someone has an idea? THX!

  -Chrome has built in Flash.

  -Safari does not come with Flash and use Flash with Safari, you need to download and install Flash

  So this is why worked chrome and Safari worked after downloading and installing Flash. Make sure you just threw always get Flash from the Adobe website.  Once you install Flash from Adobe it has also installed a Flash preferences panel in system preferences and yo can update Flash from here

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Lenovo x120e keyboard works not properly

  I have a Lenovo x120e, I bought a couple of years. Last Friday, I started to have problems with the keyboard. The first question was that the computer was save my CTRL key was pressed continuously. A single reboot did not fix this. However, by using the onscreen keyboard, I could get the computer to recognize possibly CTRL key was indeed not and my keyboard seems to work correctly again.

  However, from Sunday, I started having new problems and have not been able to solve. Specifically, the keys g and h do not work (although sometimes, if the onscreen keyboard is up as well, they will register as 5 and 6, respectively). Other keys around the Board work not (apostrophe, 5 and 6, some function keys). The on-screen keyboard works perfectly fine, as does a USB keyboard (I currently use).
  I tried the following, and none of them have helped:
  (1) virus and malware scan - nothing came (analysis complete, not just "fast")
  (2) check the performance of the equipment (an OEM utility) - no problem
  3) updated keyboard driver
  (4) uninstalled and reinstalled the keyboard driver
  5) restore to a restore point Windows before initial issue last Friday
  (6) restart in Mode safe without the attached external keyboard - same keys always had the same problems.
  So now I wonder if it's a hardware problem or a software (driver or OS) one. As I see it, my two possible options are:
  (1) If a problem with the hardware, at least try to clean and if necessary replace the keyboard
  (2) the software, wipe the computer and reinstall Windows. All my data is stored externally, while it would be annoying, is not a major issue to do this.
  I want to just make sure you choose the right course. Someone saw in which of them is most likely necessary remedy. Or if I missed a possible way to fix this without one of these last ditch effort, I would be grateful for more information.
  Thanks to you all.

  Hello Andrew,.

  I would agree that it's a hardware problem. At the same time, if you want "good" do an OS reinstall, you have nothing to lose but some time and effort.

  Kind regards

  BearPup

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• Command buttons and lights not working not properly - Satellite U400

  I am currently facing a problem with my Satellite U400, which runs under Windows Vista / Bios v3.00.
  First, the control buttons no longer work, as when I press on them, nothing more. It was that when you press on, the LED lights for a while and then come back to life.

  Now, LEDS are constantly lit. Even when the laptop is turned off and the cable is removed.

  So far, I tried to turn on and turn off the LED option in the Bios (that is turned on and off the LED on the touchpad and the logo of Satellite, but not on the control buttons). I uninstalled and reinstalled the Value Pack from recovery CD - no change. I deleted and reinstalled the Windows called devices: ACPI fixed feature button (thought this might help).

  Is there anything else I could do?

  Once the problem is resolved, I wonder if the command buttons can be customized. For some reason I do not seem to find the appropriate program to set those.

  Thanks for any input.

  Hello

  Someone suggested this work around:
  You must install the utility to control on the one hand, and where to install the value Pack, choose Advanced Options and uncheck the Support Button TOSHIBA.

  Welcome them

• HP Pavilion dv6 keyboard works not properly

  Hello

  I use a HP Pavilion dv6 laptop running Windows 7 for about a year and a half.  Recently (I can't say exactly when) I noticed that my keyboard does not work properly.  There is nothing huge, but sometimes I have to push a button twice before she will comply, or it will be delayed in its response.  Another thing is that I originally used to have to hold the function key and press the space bar at the same time turn off the light that surrounds the touchpad. Now, I just simply press the function key (not now) and, no matter how many other keys I press on in the meantime, the next time that I press the space bar, the light turns off.  It's both distracting and frustrating because I need to press the space bar to operate normally.

  My drivers are all up to date.  I tried to remove them and reinstall them. I changed a few settings in the Bios, and then reset the default settings, all to nothing does not.  I would appreciate any idea or you guys can offer me solutions.

  Thank you!

  Hi El Nacho,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion dv6 and keyboard problems. Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to take a little air to the keyboard to see if maybe it's dust or debris which initially are intermittent use?

  Thank you.