Manual Page break

Similar Questions

• Keep options avoid the page breaks between consecutive paragraphs

  Why ID CS5 will place a page break * between * separate paragraphs? My unbreakable options are set for 2/2 at the beginning and at the end of paragraphs. But obviously, I want the page breaks occur * between * consecutive paragraphs. In other words, I want two lines to be kept together on one page from the beginning or the end of a paragraph. But I don't want all the 4 lines, those two paragraphs to be kept together. Yes, it's that fact ID. He asks me to insert manual page breaks between consecutive paragraphs that fall naturally to a page break.

  Is there maybe some hangover of MS Word code that is originally for this? I can't understand.

  Do you have something to keep with Next? or are you the Dungeon with the Previous buttons checked?

• Find page breaks

  I use FrameMaker 9, but I think that it is a question that would be useful to other versions as well.

  I inserted a few manual page breaks using special > Page Break. Now I want to look up these page breaks, then remove them. The Find/Replace dialog box does not page breaks.

  Is there an effective way to find page breaks?

  Here's a way to remove overrides paragraph tags manual page break, while retaining all other substitutions.

  This savings find you every single instance, however, you should know for paragraph tags property must be set to zero.

  (1) select a tag paragraph in paragraph Designer.

  (2) set all of the properties of paging to "such what."

  (3) set the paging - start the property "Top of Page" and click on apply. When FM asks, click "keep substitutes.

  (4) again once, set all the properties of paging "such what."

  (5) the pagination - start property 'Everywhere' and click on apply. When FM asks, click "keep substitutes.

• How can I insert a page break in the Pages using shortcuts?

  I use a Macbook Pro 2015 and I am trying to understand what is the shortcut to insert a page break in the Pages. When one manually choose a page break, there is a symbol of order next to him and a carrot (^) more a dash on it (-). I tried command + enter, command + enter + fn, control + fn, but nothing seems to work. Anyone?

  This is the input control

  Enter is normally found on the numeric keypad of the extended keyboard.

  To get on a use laptop fn return, that becomes command fn back

  Peter

• When you export to epub, only about 1/3 of my chapters receive page breaks. Each chapter is in its own doc, and I tried to split apart by doc. and H1, without success. Help

  All my styles to paragraphs seem to jive, and no matter what I do, most of my chapters seem to miss their page breaks. I've heard of others having this issue with earlier versions of Indesign, but I'm on CC2014, and I thought that should be fixed now. I really won't need to learn HTML code and go break the doc epub to fix it manually, because it still doesn't work across all devices either.  I know others have this problem before racing. What I am doing wrong?

  Make sure that the paragraph style applied to the chapter title (if it is the first line of each chapter) is the tag. Open the paragraph style and go to the export of marking and Split Document (epub only). Then, when you export (assuming you are using recomposable) under general > check Split Document based on paragraph Style tags export. Try it and tell us if it helps.

• RH8 to Word - odd page breaks and headers non-amine

  RH8 and Word 2007 generation 2000 WinHelp.

  Normal page breaks are width full page.

  When I insert one in manually, it shows that only 2 inches wide.

  A tiopic with this short break does not appear as a header non-rouleau and don't get not includes in the sequence to browse

  The ideas people?

  Funny you should ask that I tried to understand this too!

  It is a matter of Word 2007 - I guess you use Office 2007? I use RH7, but I think that my solution will work for you, because it is the word, not HR.

  In any case, assuming that my assumption of Word 2007 is spot - on, you must change word options.

  1. Go to the Office button, select Word Options.
  2. Select Advanced.
  3. Scroll to the bottom of the window and find the compatibility options (at the bottom of the window).
  4. Expand layout options.
  5. Check "don't split a page break apart and brand of paragraph. (You can apply this to the doc open current you see or all docs - if all of the documents, you would probably change the global template, normal, what we can't do.)
  6. Click OK.

  Note that if you're going to recheck the setting, the format is now listed as "custom".

  Specifically, what is happening is that the page break was taking on a 'normal' style with 0pts before and after. This caused for me a big gap between the top of the Help window and my heading 1 style. (I have my style Heading 1 before 6 pt and 2pt after the value and the font is 12pt.) Modification of the above the page break to take on the Heading 1 style and then broadens also through the window of the project rather than a few inches. Exception that affect how Heading 1 can appear in the compiled help system, I see no problem with the help of the jump to page with the normal style applied, however, it is a little disconcerting. I noticed this particularly in the outline as I sort the pages in my doc in alphabetical order based on Heading 1 so I can find the information easily by customer name. When I used the 'normal' or should I say a "abnormal" style page break, these page breaks have been excluded in this way and I had no page break! (At least there still a cancellation option!)

  I don't know, but you may need to change the template robohelp.dot to keep this standing for your robohelp for word help systems.

  In addition, your heading style has probably not the paragraph format involved to "keep with next", so change the style, and who should add the parchment — not to the header.

  A last little Board, have the 'Developer' showing in the Ribbon tab. This allows you to access the model and see the styles in your doc. I would uncheck the option 'automatically update' so that when you reopen the doc, he loses any doc made you specific lifestyle changes.

  BB

• How the page break to each Department and calculate totals for Department

  I have a stored procedure that queries our sql database and returns the name of the employee, their Department, and a few other calculations. I use CFDocument to create a table and view the results. Here's the code that does this (see below) what I have to do is find a way to create a page break after that I have show a total for each column in each Department. My questions are so
  
  1. How can I insert a page break after the end of each service
  2. just above the page break, how to calculate the totals for the Department and display them?
  
  < cfdocument format = "pdf" >
  < table width = "650" border = "1" >
  < cfoutput query = "getResults" >
  < b >
  < td > #EmpName # < table >
  < td > #Dept # < table >
  < td > #JobType # < table >
  < td > #NonBill # < table >
  < td > #NonBillMeter # < table >
  < td > #NumberFormat ((NonBillPercent*100),.00) # < table >
  < td > #Bill # < table >
  < td > #BillMeter # < table >
  < td > #NumberFormat ((BillPercent*100),.00) # < table >
  < /tr >
  < / cfoutput >
  < /table >
  < / cfdocument >

  If I remember correctly, the tag you want is cfdocumentitem. Also, you want to check the attribute of cfoutput group.

  The details are in the cfml reference manual. If you do not have one, has the internet.

• Manual Page request

  Hi all

  I was looking for a manual Page entry for OS X El Capitan 10.11 to OQMGR (8)

  (Ref. https://developer.apple.com/legacy/library/documentation/Darwin/Reference/ManPag es/man8/oqmgr.8.html )

  Please guide me to know that I need to change the following settings:

  1 qmgr_message_active_limit (20000)

  2. maximal_queue_lifetime (5 d)

  I need to add/change above parameters in mail.cf or elsewhere?

  Any help will be appreciated.

  Thanks in advance

  Yes, must be added those of main.cf and they are documented here:

  http://www.Postfix.org/postconf.5.html

  However, reducing the size of the queue will not reduce your consumption of spam or fix a compromised server. Only, it will limit the amount of messages allowed in the queue at a given time. This includes spam, backscatter and junk.

• page break before: still not supported in firefox... ???

  Weather ' page-break-before: always "property not supported in firefox... ??? But it works perfectly in ie and chrome...

  See https://developer.mozilla.org/en/CSS/page-break-before

• Only 1 page print well. Page 2 is shifted to the right, and the information is lost in the page break. FireFox 8 and 9, Mac OS 10.6.8

  Mac OS 8 and 9 FireFox 10.6.8
  If I print a web page, all simply to print or save to PDF, only the first page prints fine. Page 2 is shifted to the right, such as the information is cut on the right edge. Information is lost in the page break, several lines of text will be lost. If I need to print a page, I open Safari, which does a very nice job of formatting of the page for printing. But I want to use FireFox. Can you help me?

  The problem persists if start you Firefox in Mode safe? http://support.Mozilla.com/en-us/KB/safe+mode

  What is with an empty profile? http://support.Mozilla.com/en-us/KB/basic%20Troubleshooting#w_8-make-a-new-profile

  If it happens in the two safe mode and with a new profile, please post the content of about: support

• Insert Page breaks in Documents

  I need to insert page breaks in some documents and cannot find information on how to do it.  On win 98 it was control (enter) but this does not work on Vista.  Can someone help me on this stupid problem, please?  I would be Greatful SO I can at least do SOMETHING with Vista!

  Without knowing the program, it is impossible to tell you how to make a page break (they are all different).  Notepad or Wordpad supports the pagebreak feature (CTRL-enter as you say for Microsot Word {version today as well} and a few others that I wasn't aware that it worked in Windows 98 supplied "processing" programs more than it does today).  Maybe you were using a different program, and then (as Word or WordPerfect or Works or something like that).

  If you have no Microsoft Office (so do not Microsoft Word), then I strongly suggest you download the OpenOffice free at www.openoffice.org , which reflects a large part of the core functionality of the Office (with the exception of Outlook) and has a program called writer which is a program of processing excellent - better by far than what comes with Vista.  It can even open and work with Microsoft Office documents (even those of 2007 and I believe that the beta of 2010).  It will certainly have a page break function (as well as MANY other features that come with the office suites only expensive (but again, this is free and despite this, it is excellent).)  If you do not have Microsoft Office or another suite purchased offfice, then I HIGHLY recommend you download and use this set of programs instead of what comes with Vista (although there are times when what you really need is an option such as Notepad - cheap and Notepad is also good for making batch script files if you are into that sort of thing).  But if you do a real word processor, you must definitely pass.  If you go, try CTRL + entry for a page break and if that is not working then check page break in helping get the correct keyboard command - but I bet it's the same thing.

  Don't be too upset that this means that you need a 3rd party program "do something with Vista.  OpenOffice is so much better that it is not yet a comparison value.  The truth is that products delivered with Vista are just not as good as some of those available on the open market (be it for a price or sometimes free).  I happen to love Vista Center backup and restore (but it's really good in more expensive versions of Vista (business and above)- and yet, there is a 3rd best product part out there for that as well (Acronis: http://www.acronis.com/homecomputing/products/trueimage/ but it is not free).)

  There are some Vista programs that may be useful.  Some people use Microsoft Mail and Microsoft Contacts as long as their email client (and customer contact) - Although many who start this way switch to Microsoft Live Mail (it's a little better than Microsoft Mail), and of course, if you have Microsoft Office, you should definitely switch to Outlook (which is MUCH better, but it costs money that the Office is not free).  As a free alternative, many use Mozilla Thunderbird http://www.mozillamessaging.com/en-US/thunderbird/ as, yet once, it is a better product with more features and options (and it's free Unlike Outlook).  The program Microsoft Search in Vista is very good if you take the time to learn how to use wisely and has need of no alternative.

  Remember that none of these other programs would work without Windows Vista (or some other OS) behind it - so it does not serve an important purpose.  You wouldn't be able to post on this site without Vista and a browser.  If you use Internet Explorer, it's kind of like using Vista because version 7 comes with Vista and cannot be added or removed (it's part of the base OS) - If you're probably using IE8 that was the upgrade (and a value of upgrade).

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Have laptop Intel and impossible to find a page break

  Try to see how the page break in a WordArt object

  As far as I know, "Word Art" is a feature of Microsoft Word.  The location where you will find the "insert a page break" differs according to the different versions of Word, but for recent versions, it is as described here:

  https://support.Office.com/en-us/article/Insert-a-page-break-7613ff46-96e5-4e46-9491-40d7d410a043

• Insert Page breaks

  I need to take a PDF of a page and insert several page breaks. I use Adobe Acrobat Standard DC and can don't seem to find anyway to divide a page into several pages. What I've done is to convert the PDF to Excel and the fact that way, but the text is compromised, and I find myself spending a lot of time to change the overall structure of the document. It would be simpler to use Adobe Acrobat to keep the document exactly as it appears in the original PDF form and just break the page up with an insert of pages such as break in Excel. Any help would be appreciated.

  You can't just insert a page break in a PDF file. It is not intended to be edited in a way.
  If you have the original file then modify it and then generate a new PDF. If you have not then your best chance is to export the PDF file to another format (such as an Excel spreadsheet or a Word document) and then edit it and create a new PDF.

• How to prevent the gap after a page break?

  Hello

  When you try to add a page break between the linked pages, I have an annoying problem where the space is added at the top of the new page (see attached screenshot).

  I do not have 'space before' or 'space after' set on the paragraph style where the page break is applied, if it's not that.

  Thank you!

  

  Looks like you used an empty paragraph as a spacer. With the help of the space before or after the space instead of empty paragraphs will prevent the empty space at the top of a column.

• Application of paragraph style problem and adding page breaks

  I work on the formatting of a novel in InDesign.   I met two problems.   The first of them is to apply a paragraph style to a specific paragraph.  Every time I try the paragraph in question shows a '+' after the style in question and will not apply the style.   I know that the sign '+' means that the style changes were made but I want to apply the style as it was before those changes were made and InDesign doesn't let me.

  The second problem concerns export ePub.   I inserted page breaks in some places inside the InDesign file, but when I export to ePub, the export process ignores the page breaks.  I know that I deal with text content may be but I don't want my scene headers (chapter) appears at the bottom of a page in the ePub.

  Thank you

  Command-click to erase the wrinkles too.

  Re page breaks, in the paragraph style for the scene (chapter) headings, try to tick in the paragraph Options of Style, tab Panel Options export, Split Document (ePub only).

  I can't remember, but you will need to check the document page can be Split in the EPUB - export of content Options. (see below).

  (Is there a forum for InDesign ePub).