Manual upgrade with operating system and change in the architecture

Similar Questions

• I upgraded my operating system and I need to reinstall Adobe Pro

  I upgraded my operating system and I need to reinstall Adobe Pro. Any help?

  Adobe is a company, do you mean Acrobat Pro?

  Insert the installation disc in the drive and follow the instructions on the screen

  Or download the Installer for other downloads

• Should I put folder Cache Disk/Media in primary SSD with operating system and applications?

  Hello, I have an SSD SATA3 with OS and applications on them and 2 HDD SATA2, one for the footages/projects and the other for renders / archive.

  I think putting the drive/media in the SSD cache should boost performance because of the speed, but I've heard that it can shorten the life of the drive, even though I'm not sure how much.

  I guess I could buy an another SSD dedicated for the disk cache, but I'd rather not if they are put on the same drive with OS and applications will be not too much problem.

  Go ahead and put your caches on the SSD even as your operating system and applications.

  Most of the concerns on the repeated Scriptures SSD causing failure are older versions of the technology. Reliability is improved greatly now. Also, has not lost much if your SSD fails, and it doesn't have your applications, OS and caches on this, since you can reinstall your operating system and applications fairly easily.

  You never want to have your irreplaceable possessions (as the only copy of your images) on a disc that you're afraid to fail.

• Can I use my secondary drive with operating system installed only on the primary drive?

  I want to install simulator FSX on my secondary drive, I heard that it will pick up the pace. I install Win 7 on my secondary drive in order to make it work?

  Primary-Seagate Barracuda 1 TB Win7

  Secondary-WD VelociRaptor 10000 RPM

  Thank you

  Noobie

  I run my sim card on a Sharp 70 "Led 1920 X 1080 p, its so rude, but I like it. I recently got the GTX 590 to find FSX hate double GPUs.Another lesson learned the bad sense, lol. (soon gtx 680)  Also I saw FSX does not play well with the RAID. The sim card is dependent on almost all CPU but with mem cpu and mobo upgrades I should;(better!) See a significant difference. I see a drop in FPS on such a large screen, are there tips to improve?

  Thanks a lot for your answer.

  (24 gb 1866 mhz mem, Asus p6t7 Mobo, intel i7 975 happen soon.)

  Oh yes, I am running an i7 - 2600 K on an Asus P8Z68-V mainboard with memory 32 GB GSkill, Yes, I use a lot of memory, but my performance is excellent, no bottle no necks here. I read that my favors 1600 MHz cpu, with a card mother dual channel is to have triple or quadruple channel about the latency of memory and cache. I think you should run an i7 - 2600 k or even an i7 - 3770 k and at least a card mother with a Z68 or better (Z77) chipset, I also think that FSX could benefit from the technology of fast storage Intels. In addition, I think you should consider at least a 32nm, otherwise a 22nm CPU. Sandy Bridge or Ivy Bridge CPU are pretty hard to beat. I use my system for games, photo editing and a few VMs running via VMware 8.0 and I'm quite satisfied with the overall performace, with 32 GB of memory, I'm not even under a swap file. In any case, you need to re - consider your choice of material. I have always a way to upgrade with my CPU, hard drives and the GPU.

• How to deal with operating system windows 8.1 and apps on usb device

  Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

  Hello Mohan,

  Thanks for posting your query in Microsoft Community Forum.

  I can of course understand the situation and will be happy to help with your query.

  Let me ask you;

  • You have the key product for Windows 8 or 8.1?

  You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

  You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

  As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

  You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

  You can follow the steps below to create installation media.

  1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

  4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

  You can also read the article below to create a USB stick recovery.

  Create a recovery USB disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Had to reload operating system and applications data, now can't get firefox to recognize the profile data

  My C drive (disk solid state drive), which held my operating system and data from the app crashed. I had it replaced, updated Win 7 to win 10 and have downloaded Firefox. I was able to restore my profile from a Mozy backup data and copied in the Firefox folder. But Firefox resolutely refuses to recognize. I tried using the recovery data from an old profile, but no advantage help page. Tried to use the Manager profile, but without success. When I go to Troubleshooting Information and click on file/Show profile, it comes up with a list of files (files starting with bookmarkbackups, which however is empty, down for webapps, which has the file inside webapps.json), then the files from addons.json down through xulstore.json and the file places.sqlite is 10 240 KB Although there is something in there, but Firefox resolutely refuses to acknowledge my profile, bookmarks, etc..

  I'm out of options and ripping my hair out trying to get all my favorites, in which I have a lot of information such as the authentication of data for many favorite sites. It is frustrating that all the information seems to be there, but Firefox ignore all.

  Can anyone help?

  Such a backup is perhaps a ZIP archive containing all the files into it if it is not a real file, but only one file.

  Note is that you replace the file places.sqlite with a copy of the backup that you have to make sure to remove existing places.sqlite - shm and temporary files to SQLite places.sqlite - wal.
  Ditto for the other SQLite files that you are restoring.

  Have you checked the application.ini file in the backup?

• I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me

  I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me to solve the problem.

  as I know he never was a 5.5 ps, but something more old ps cs2 (version 9) is not likely to work on any modern operating system.

  You can use your old computer with them or try and install using compatibility mode or consider an updated version of the ps ($ 10 / month for lr and ps is the plan more economic that includes ps), plans, pricing and membership creative cloud | Adobe Creative Cloud

• I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software

  I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software.  I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work.  I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive.  My CS6 software install?  I bought CS5 and CS6 improved.  I don't want to go on the CCif I don't have to.  Thank you!!!

  as long as you have your serial numbers and installation cs6 files, you should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• 32-bit operating system and 64-bit

  Hello

  Can someone explain the difference between the 32-bit operating system and 64-bit? I am running with 32-bit win7 but
  How about 64 - bit? Does it mean that 64-bit is more advanced? Thanks in advance.
  ;-)

  Klyde

  For starters, you cannot switch between bits or a slightly upgraded version to the other, it takes a clean install of the bit appropriate win7 version.

  On a win7 32-bit level basis can only use 4 GB of ram, 64-bit can use much more. Of course if your installed programs can use more ram is a separate issue.

  The majority of the programs is still 32-bit

  Nothing else google or Bing search

  http://en.Wikipedia.org/wiki/64-bit_computing

• I have Photoshop CS6, can I upgrade my operating system to Windows 10? currently I have Windows 7

  I have Photoshop CS6, can I upgrade my operating system window, 10? currently

  I use windows 7

  Do this and your CS6 CAN stop working

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• How to upgrade my operating system to Yosemite on a MacBook Air running Lion 10.7.5? I don't have 2 GB of free memory.

  How to upgrade my operating system to Yosemite on a MacBook Air running Lion 10.7.5? I don't have 2 GB of free memory.

  Assuming that you previously purchased on the app store and your Mac meets the minimum requirements, unload you enough data on an external drive to free the necessary disk space and update via the app store. If you buy before it and it is not in your shopping list, you do not have.

• I have a Mac osx Mountain Lion operating system and bought a 6510 e hpPhotosmart - all - in - one.

  I have a Mac OSX Lion mountain 10.8 operating system and purchase an e-all-in-one printer of hp Photosmart 6510.  I inserted the setting up the printer installation disc.  Received a pop up that States "unsupported operating system this Setup program is not compatible with the version of the operating system on your computer.  It is compatible only with 10.7 and below.  For more information, visit www.hp.com"Please help.

  Hello

  The software provided for Mountain Lion available on the HP site and you can download it below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107204-1&cc=us&DLC=en&LC=en&OS=219&product=5058336&sw_lang=

  After completing the installation, be sure to check for any HP Update availble by clicking on the icon Apple, then software update.

  Kind regards

  Shlomi

• Window xp sp2 professnal operating system and drivers for compaq 420

  Hi comrades.

  I buy a new computer compaq 420 laptop. I have installed window xp professional sp2. after complete installation, the drivers are needed for the healthy material. I go to my computer then select Properties Device Manager and see the following drivers required

  1. hp integrated module

  2. network controller

  3. PCI device

  4. video controller

  5. video controller (VGA compatible)

  Then I click on the hp site enter the product number select the operating system and download the drivers and install it.

  I explain all the above procedure, a situation of problem or interbreeding because of swear I've met who, in virtue.

  I have install the driver of HP integrated module, video network controller and also .netframework 3.0 Microsoft.

  Now there is no sound / audio so I install the audio drivers sound is the device driver PCI is ok after installing the audio driver but HIGH DEFINATION AUDIO BUS DRIVER SHOWN in the DEVICE MANAGER I ALSO DOWNLOAD IT of THE SITE HP

  BUT ALWAYS YELLOW ICON IN THE DEVICE MANAGER. SOME OF MY FRIENDS SUGGEST ME THAT DOWNLOAD THE UAA BUS DRIVER 1.0 OF MICROSOFT, I DID INSTALL THEM, BUT THE PROBLEM STILL THERE.

  How to SOLVE THE PROBLEM?

  The other problem is that HDA bus once is ok, but the PCI bus becomes yellow. I have search everywhere on the web but not found.

  I explain every thing here please help me.

  Thanks and greetings

  Hello

  First download and install:

  Intel Chipset driver ici

  and don't forget to restart your system when you do.

  To get to his card work download and install first:

  MS-UAA for XP with SP2 (required with a reboot before the graphics and Audio, Modem driver) here

  Only after this, download and install:

  IDT Audio high definition (HD) Driver here

  Now install the driver for graphics card:

  Driver video Intel and control panel here

  Peripheral PCI should be modem:

  LSI High-Definition Audio (HDA) Modem Driver here

  HP integrated module (which is for sure Bluetooth) and network controller have few opportunities on your list of model drivers, so we will need more information to give you an answer corerect to solve these two problems. Reach:

  Control Panel-> system-> hardware-> Device Manager

  Click with the right button of your mouse on each yellow sign with exclamation point ( ), and then choose Properties. Then, go to the ' Details ' tab and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it: