Port number for a manually created database

Similar Questions

• creation of listener for the manually created database

  Hi all

  Oracle 11 g 2

  RHEL 5

  I have a server with a single database that is installed with the default listener listen to 1521.

  Now, I'll create another data base to help create database statement. I want to have a separate listener called listener2 on port 1522. How the database manually created to listen to listerner2...

  Kind regards

  1 / created the database manually

  Using SQLPLUS > CREATE DATABASE...

  For additional info check documentation for version you use.

  2 / create a new listener

  USE NETCA or UPDATE YOUR LISTENER. ORA or use srvctl

  For additional info check documentation for version you use.

  3 / update the database using the parameter local_listener with the new name of listening port?

  Using sqlplus > alter system set local_listener = scope = <> = sid<>

  For additional info check documentation for version you use.

• Question about Enterprise Manager for a manually created database

  DB versions: 10 gr 2, 11g
  
  I will create 10 gr 2, database 11G manually (without using DBCA). Enterprise manager be installed automatically if I use the CREATE DATABASE command like
  

  create database "mnprod"
  user sys identified by mnsys
  user system identified by mnsys
      logfile
      group 1 (
          '/u02/oradata/redologs/ora238_redo1a.log',
          .
          .
          .
          .

  Enterprise manager be installed automatically if I use the CREATE DATABASE command like
  No, you need to expilicity create "oem" repository 'DBCA' or 'EMCA '.

  Kind regards
  Taj

• Port number for Oracle RAC

  Hi all

  I have a Setup to RAC two nodes using SCAN, and I have two databases on this subject. Can have the same port number?

  Thank you!

  No, two databases/instances with a listener is not a performance issue.  Aman stressed that the listener is not 'busy' it is only necessary to initialize the connection to the database instance.

  If you plan a very large number of connection requests to come (i.e. a high rate of queries per minute), you can go to the shared server (if the sql operations are running) or use the QUEUESIZE parameter for the listener.

  Hemant K Collette

• Port number for mail electronic vCenter

  Hi guys,.

  I was curious to know if it is possible to specify a different port number to vcenter 4.0 U2 to send email alerts?

  Thank you

  Dougie

  Yes, you can change this by going to your vSphere Client connecting to vCenter Server under Administration-> vCenter Server Settings-> advanced settings

  You will find an entry called mail.smtp.port by default, it uses 25

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• change port number for the mobile server after installation

  Jin
  I use windows 2003 server release 2, Server Oracle 11 g R2 and oracle database lite 10g R3. I installed successfully the mobile server with port 80, but when I start the mobile server I get an error message indicating that port 80 is already in use. Now, I need to change the port number of the mobile server. can someone tell me the solution.

  If the Oracle Lite installation type is INDEPENDENT, then to change the port number of Olite in any other available free port number, you must edit the file by default-web - site.xml or site.xml - web-http file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.

  You can at any time change the port in the file http web - site.xml and bounce services, the new port will take effect.

• How do you change the port number for Apex listener V2?

  I run listener Apex V2 in stand-alone mode on Linux.  I want to change the port number of the listener apex V2 (e.g. 80 to 8080).  How I do that without having to re - install the new listener?

  Thanks in advance

  PaulP

  Hi PPlatt,

  You can change your_listener_home_directory/apex/apex.properties

  http.port = 8080

  Stop & restart receiver.

  HTH

  Zack

• Port number for the switch Cisco 4503

  Dear Sir.

  When there is a power outage our router to pass link would not come, we must reset switch port all the time, so we are facing a problem as it is a remote site, all the time, that he must go to reset the port. So I hope your kind response to this problem.

  Switch - 4503

  Router - 3725

  The link is layer three.

  Best regards

  Before the port is reset, which is the full output of the command 'sh interface status error "?

• Manually change the VIEW port number

  
  Our 11.5.9 system simultaneous report ADF, we have started a background service X at the Admin level for running report server. As the UNIX admin request, we must change the port number for X windows. Since it's the production, we have a lot of customization, I want to avoid undate the context file and run the automatic configuration service. Therefore, I tried to change the DISPLAY setting in the files of the environment on levels directly. However, it does not work. Does anyone know what I missed?
  
  Here is the list of the files that I hit.
  
  adcmctl.sh, adrepctl.sh, $IAS_ORACLE_HOME/Apache/Jserv/*.properties on two levels, re - has bounced back after the application.
  
  Thank you
  
  Sean
  
  

  This is Note: quick search 364838,1 - REP-3000: internal error from the Oracle package

  Good to know that the problem has been resolved.

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• Workspace URL without port number?

  Hello

  Y at - there a way to config the URL for the workspace do not use the port number for LCES Webpshere 6.1 environment (e.g."" http://localhost: / workspace/ "instead of"http://localhost:9080 / workspace /"'") due to the configuration of the firewall?

  Thank you

  DAO Han

  (1) change the port WC_defaulthost of the appserver 9080 to 80 instance

  (2) make sure that '80' is listed as a 'host alias' for the virtual host 'default_host' or another virtual server that you created exclusively for LiveCycle

  (3) restart the appserver instance

  (4) check the SystemOut.log and verify that all web modules LiveCycle now bind to port 80, among others (such as 5060, 5061 etc.).

  (5) try http://localhost/workspace and it should work.

• CS6, wanted to try CC, decided that I didn't need for CC, now unable to use CS6 keeps telling me I have to pay renewal fees to use CC. Have the serial number for CS6

  CS6, wanted to try CC, decided that I didn't need for CC, now unable to use CS6 keeps telling me I have to pay renewal fees to use CC. Have the serial number for CS6

  Create a new Adobe ID non-CC plan that you tried. Connect you to the Adobe site with this when you install CS6.

• (Management and port number) firewall rules

  Someone at - it information on how to get management and port number for a given ESX host firewall rules using the 'VI Perl Toolkit?'

  For some reason, I can't work this one on. I can get to:

  $host - & gt; config - & gt; Firewall - & gt; set of rules

  and from there I can get the label and the State enabled, etc., but I want to delve into the section rule to get the port number and the management as well as for each service.

  For example, from the CROWD:

  HostFirewallRule	Name	Type	Value
  Direction	HostFirewallRuleDirection	"entrants".
  dynamicProperty	[DynamicProperty]	Unset
  dynamicType	string	Unset
  endPort	int	Unset
  port	int	5989
  Protocol	string	"tcp".

  |

  How can I get this information for each service?

  Thanks in advance

  If you found this helpful, please consider awarding points

  Hi Paul,.

  You will need to first loop through the array rule set of firewall and from there you will get some properties this State if it is active, service, etc. and you will also have access to an array called rule that contains the rules within each of the ruleset. Once you go through the rules, you will find information about the direction, endPort, port and Protocol

  Something like this should work (there will be values that will not fill as endPort, so make sure you check before printing/etc.)

  my $fw_ruleset = $host->config->firewall->ruleset;
  
  foreach(@$fw_ruleset) {
       my $rules = $_->rule;
       if($_->enabled) {
           print "Firewall Rule: ", $_->label, "\n";
           foreach(@$rules) {
                print "Direction: ", $_->direction->val, "\n";
               print "End Port: ", $_->endPort, "\n";
               print "Port: ", $_->port, "\n";
               print "Protocol: ", $_->protocol, "\n";
            }
            print "-------------\n"
       }
  }
  

  Here's a quick snippet out:

  Firewall rule: SNMP Server

  Direction: inbound

  Use of uninitialized value, catalogue in ligne./vmwareHealthCheck.pl 1748.

  Ending port:

  Port: 161

  Protocol: udp

  Direction: outgoing

  Use of uninitialized value, catalogue in ligne./vmwareHealthCheck.pl 1748.

  Ending port:

  Port: 162

  Protocol: udp

  -

• Create Database manual

  Hello
  I have a computer virtual centos 5 on my pc. I'm testing on the creation of a database by simply using the "create database" command plain based on the book by Tom. But when I try to execute it I get an ORA-01092. This is what contains the log of alerts:

  Errors in file /u01/app/oracle/product/10.2.0/db10g/rdbms/log/ora10g_ora_6389.trc:
  ORA-01501: CREATE DATABASE failed
  ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 1740
  ORA-00604: error occurred at recursive SQL level 1
  ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","insert into ts$ (ts#,n

  The trace file contains:

  ===============================
  End 4031 Diagnostic Information
  ===============================
  Warning: out of shared memory loading library cache object [handle=253c8238] 
  insert into ts$ (ts#,name,online$,contents$,undofile#,undoblock#,blocksize, dflmaxext,dflinit,df
  lincr,dflextpct,dflminext,dflminlen,inc#,owner#,scnwrp,scnbas,pitrscnwrp,pitrscnbas,dflogging, a
  ffstrength,bitmapped,plugged,directallowed,flags,spare1,spare2) values (:1,:2,:3,:4,:5,:6,:7,:8,
  :9,:10,:11,:12,:13,1,:14,:15,:16,:17,:18,:19,0,:20,:21,1,:22,:23,:24)
  ORA-00604: error occurred at recursive SQL level 1
  ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","insert into ts$ (ts#,n
  ame,on...","Typecheck","seg:kggfaAllocSeg")
  Offending statement at line 1740
  create table bootstrap$
  ( line#         number not null,                       /* statement order id */
    obj#          number not null,                            /* object number */
    sql_text      varchar2(4000) not null)                    /* statement */
    storage (initial 50K)            /* to avoid space management during IOR I */
  ORA-01501: CREATE DATABASE failed
  ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 1740
  ORA-00604: error occurred at recursive SQL level 1
  ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","insert into ts$ (ts#,n
  ame,on...","Typecheck","seg:kggfaAllocSeg")

  I have the suspicion that there is a memory problem. I'm still not well informed in this part, but looking at some notes that I check these settings:

  SQL> startup nomount;
  ORACLE instance started.
  
  Total System Global Area  113246208 bytes
  Fixed Size                  1218004 bytes
  Variable Size              58722860 bytes
  Database Buffers           50331648 bytes
  Redo Buffers                2973696 bytes
  SQL> show parameter sga
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  lock_sga                             boolean     FALSE
  pre_page_sga                         boolean     FALSE
  sga_max_size                         big integer 108M
  sga_target                           big integer 0
  SQL> show parameter pool
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  buffer_pool_keep                     string
  buffer_pool_recycle                  string
  global_context_pool_size             string
  java_pool_size                       big integer 24M
  large_pool_size                      big integer 0
  olap_page_pool_size                  big integer 0
  shared_pool_reserved_size            big integer 1677721
  shared_pool_size                     big integer 32M
  streams_pool_size                    big integer 0
  SQL> 

  I tried to do some resizing:
  

  SQL> alter system set shared_pool_size=128M
    2  /
  alter system set shared_pool_size=128M
  *
  ERROR at line 1:
  ORA-02097: parameter cannot be modified because specified value is invalid
  ORA-04033: Insufficient memory to grow pool

  This virtual machine has a 700 + allocated memory. Could someone give me some advice on how to fix this? I get this erros when I run the 'create database' of sqlplus after startup nomount command. Thank you very much.
  
  Kind regards
  Rhani

  you will not be able to do much in 700 MB.

  For the DATABASE to CREATE your SHARED_POOL_SIZE should be at least 250 MB, 400 MB preference. Therefore, you must first increase your SGA_MAX_SIZE at 500 MB!

• I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away.

  I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away. I need to download the product and I may not know where to start.

  Ask someone to your school... You have a Cloud redemption code, or a number of series CS6?

  If cloud, http://helpx.adobe.com/x-productkb/global/redemption-code-help.html Redemption Code and

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  If CS6, download to other downloads and enter your serial number when prompted

  Once again, your 1 resource is your school