Manually install the update on the Server 2008 R2 - FATAL: unable to connect to service (hr = 80004002)

Similar Questions

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
  I've got max 16 GB of RAM. I have very few applications other than Office 2013.

  Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

  your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

  Let me give you 3 Tips:

  1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

  (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

  (3) If you require loading time fast on programs, think about an SSD upgrade

• How to manually install the old Mac OSX flashplayer.app

  Hi, I need to downgrade FlashPlayer for a certain software from Leap Frog connect CFT can use it.

  LFC reported adobe flash players archives:

  http://kb2.Adobe.com/CPS/142/tn_14266.html

  When I extracted the version specified, it gives me ONLY a "Flash Player.app" (not an Installer).

  MY QUESTION IS where manually install the flashplayer.app while it is committed?

  (I tried to put in Applications, does not work)...

  Mac G4 10.4.11

  Hi, for following my last post on holding off. What are the browsers that you use?

  Leap Frog recommended version is the one you want, not the one you have open. HOWEVER, the vs 10.0.45.2 is a very old version and has no security patches which have the 10.1. It's one thing. The other is that if you use a browser and install this version 10.0, sites that have updated for the 10.1 and last may not work correctly.

  What I would say to you, is if you need to install the vs for the needs of Leap Frog, and then to do it in a browser and use to Leap Frog.

  Install in another browser, the latest version of Flash Player vs 10.1.102.64 so you can access the Web sites that have updated.

  Now another thing, the browser that you choose to install the 10.0, you will need to uninstall everything that is there first, restart and then install and reboot again.

  If already, you use a different browser and install the latest FP in it and already have an older version installed, then you must uninstall in the same way.

  Hope that it is not confusing, but let me know.

  Thank you

  eidnolb

  P.S. I'm on a fine late lunch and check your answer as soon as possible.

• to use Terminal Server services on the Server 2008 r2 is the server must be a domain controller

  to use Terminal Server services on the Server 2008 r2 is the server must be a domain controller

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• Fatal error when installing the Server Application Weblogic 11 g (10.3.4)

  Hello

  In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.

  So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".

  Can someone help me please to solve this error. Thanks in advance

  Kind regards

  Priya

  Hello

  The message that took place there is a permission problem. So could you please try the installation with administrator privileges.

  In case if the same mistakes persist could you try to install another directory C in a different way.

  Kind regards.

  Prakash.

• Complete restoration of the Server 2008 R2 vmware workstation for windows backup image 9

  9 workstation.

  I am trying to restore a backup of windows server r2 2008 (made with the built-in windows backup) on an existing installation of vmware server 2008 r2. Basically, I just want to replace the facility with the backup version.

  The problem is, the windows to the backup image is on a USB key.

  The restore process is:

  1. Connect the usb host drive
  2. Insert the windows server r2 DVD in drive
  3. initialize the Server 2008 r2 comments and press the button ESC at startup, then boot from the CD
  4. Select 'repair' installation
  5. but here's the problem, windows backup image is on my USB, but at this stage I do not see the USB key from the client in the repair installation process.

  Ideas of the best way to do it?

  Thank you

  Okay, downloaded the ISO Image of Windows Server 2008 R2, created a new Virtual Machine, added the Windows Server backup and made a full backup without the destination for the backup drive, a USB Flash drive.

  Started the virtual machine of the ISO Image and it does not see the backup from a USB Flash drive, although I can see it from the command prompt.

  Also created a record gross hard pointing to the USB Flash drive and started the virtual machine of the ISO Image and he does not see the backup of the hard disk gross of the Flash USB drive, because the Virtual Machine had problems during the boot process.  Forget the exact error message, but I tried as a whole disk and a partition.  So the why I tested it by copying it to a normal file depending on the disc hard virtual (and worked).

  Finally I created a regular file based hard and copied the backup folder of the USB Flash it and then started the virtual machine drive of the ISO Image and it had no problem see the backup from the normal file based hard.

  It seems that you have to take the long way around, but at least, you should be able to see!

  I know not when booting from the ISO Image or a disc of Windows Server 2008 R2, backup tools command line are available to restore the image however you could examine the issue.  I would like to but I just don't have the time at the moment.

  Post edited by: WoodyZ - modified comment re: Raw Disk

• I can't install windows install 4.5 on windows server 2008 r2

  I try to install windows install 4.5 on my Server 2008 r2 and I get error "update is not applicable to your computer.

  I need help guys. What can I do?
  I thank.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro audience on TechNet.

  Please ask your question in the following TechNet forum.

  http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Update error - SQL Server 2008 SP1

  Hello

  I am using Windows 7 Ultimate 64 bit

  I installed VS2010 Trail, then I installed SQL Server Express Studio

  My Windows shows update there is a update for SQl Server 2008 Service Pack 1

  But when I try to install this update

  I get an error like below

  Error Code 84 B 20001

  a few times with error below

  WindowsUpdate_20000001 WindowsUpdate_dt000

  What should I do to fix this

  Thank you

  Harsha

  RedandBlue,
  The link Shalini gave about the clean boot procedure provides detailed instructions on the use of MSConfig.  I think you have just misunderstood the steps listed above.  When you open msconfig, click on the button beside selective startup. Then uncheck (clear) the box "Load system services" and "Load Startup items" and then apply and restart.

  If you have not seen this thread , you can read through it, because it covers the same error you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Windows Server 2008 R2 x 64 Edition (KB3161608)

  It seems that update for Windows Server 2008 R2 x 64 Edition (KB3161608) caused an error of communication channel protected on OpenManage, anyone else see this today?

  Running Windows 2008 R2

  Servers PE 840 field and a general PE 2900 server

  Remove the two KB3161608 server resolves the problem, but then I have my updated servers to update.

  The next fatal alert: 40. The internal error state is 808 (on my domain name)
  The next fatal alert: 10. The internal error state is 1203. (On general server)

  Dell OpenManage (64-bit) Version 7.4.0 systems management software
  Copyright (C) Dell Inc. 1995-2014. All rights reserved.

  Details

  Version of the Broadcom SNMP Agent 17.6.4

  Common Storage Module Version 4.4.0

  Engine data Version 7.4.0

  Material programming interface Application Version 7.4.0

  Instrumentation Service Version 7.4.0

  Version of the Intel SNMP Agent 1.118.0

  Server Web Apache Tomcat 7.0.39 version

  Oracle Java Runtime Environment Version 1.7.0_21

  Administrator of Server Core files Version 7.4.0 (866)

  OMACS Version 7.4.0

  Instrumentation Service Integration Layer Version 7.4.0

  Instrumentation of the administrator of the server files Version 7.4.0

  The inventory Collector Version 7.4.0

  Storage Management Version 4.4.0

  The Common Framework Version 7.4.0 server administrator

  Logging system Version 7.4.0

  Remote Access Controller managed node Version 7.4.0

  Server SNMP instrumentation, Module Version 7.4.0

  Agent for remote access Version 2.0.0

  Server WMI Instrumentation Module Version 7.4.0

  OSMA 8.3 installation and will be re - install KB3161608

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=TK61C

  General PE 2900 Server

  It seems that this IS THE DIFFICULTY.

  Now test OSMA 8.3 on my domain controller.

  Area PE 840

  It seems that this IS THE DIFFICULTY.

  Make sure that you run Windows Update after restarting the installation KB3161608 Server

• I'm trying to install Movie Maker on Windows Server 2008.

  I try install Movie Maker on Windows Server 2008 but a message appears: MOVIEMK.exe - incorrect Image "C:\Program Movie Maker 2.6\WMVCore.DLL is not designed pour will run on Windows or it contains an error, etc..".

  Can you help me, is it you please?

  I try to install Movie Maker on Windows Server 2008, but there is a message: MOVIEMK.exe - incorrect image "C:\Program Movie Maker 2.6\WMVCore.DLL is not made to run on Windows or it contains an error, etc.

  Could you help me, please?

  Hello STELL'AIR.

  Unfortunately, this community is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list and then click the arrow button
  http://support.Microsoft.com/common/international.aspx

  Have a great day and thank you for your visit.

  http://support.Microsoft.com/common/international.aspx

  Have a great day and thank you for your visit to the Windows community.

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install Oracle 9i under Win Server 2008

  Hi all
  
  I just wanted to know that is it possible to install Oracle 9i on Windows Server 2008... It is supported on Server 2008...
  
  I surfed on the internet for more information about this and what I received was that Oracle 9i is not supported on 2008...
  What then... and cela means that I need to install a newer version of Oracle on Windows Server 2008... ??
  
  Thanks and greetings
  Pratik Lacoste
  DBA Oracle Jr

  Yes, you must install a newer version of the database oracle in windows server 2008.

  Install 10.2.0.4.0 for windows server 2008.

  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10204_winx64_vista_win2k8.html

  Concerning
  Asif Kabir

  Published by: asifkabirdba on January 11, 2010 13:00

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

• The server does not support an SSL connection to a Hotmail account

  Original title: the server does not support

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Your Hotmail account is configured in Windows mail or Windows Live Mail. Yes?
  If the school is "none"... ignore the rest of my answer.

  If so,.

  Open Windows mail > tools > accounts > click your hotmail account > properties > advanced. Under outgoing (SMTP) Mail, change the port # 25 to 587 > click OK

  see if it's ok now by sending a test message to yourself.

  t-4-2