Many e-mails sent when adding an attachment to my Windows Mail in Windows Vista

Similar Questions

• What does Err1 and Err3 when you restart your PC with Windows Vista?

  What does Err1 and Err3 when you restart your PC with Windows Vista?

  Hi MichaelNessel,

  1. What is the full error message that you receive?

  2. don't you make changes on the computer before this problem?

  3. What is the brand and model of the computer?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• my wireless does not work when I download the update for Windows Vista (KB2753842) security

  After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

  the fact. When I used a LAN cable I internet connection.
  When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
  The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
  Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
  Thank you.
  Roy

  Thank you very much for your answer.

  I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

  Kind regards

  Roy.

  Hi royhorrobin,

  Please report the problem to the Microsoft Community Forum.

  We will help you solve the problem.

   

  1. What is the brand and model of the computer?

  2. do you get an error message?

   

   

  We would like to tell you that this is a critical update...

  Find information here:

  http://support.Microsoft.com/kb/2753842

  Here are some steps that you can follow:

   

  Method 1:

  Step 1: Restore the system to the United Nations-isntall the software update.

  Refer

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  Step 2: Put the computer to boot, with warning...

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

   

  Step 3: Download and install the update manually to the clean boot.

  Method 2:

  Try to update the Wireless driver and check to see if the same problem happens.

  a. click on start
  b. right click on computer
  c. click Properties
  d. click on Device Manager on the left hand side

  e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
  f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   

  
  Method 3:
  Also, try the steps from the link below:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
   
  Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• I believe that when I had my computer reset Windows Vista has been removed from the system due to my computer with a virus. Now, I need to know how can I do to restore Windows Vista in my system?

  I need help restoring Windows Vista on my computer.  Please help this is finals week and I need my computer to take my final.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash when you're back running.

  They will tell you how to do this.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Plugin Silverlight continues to crash when adding an attachment to the e-mail despite uninstalling and reinstalling silverlight and firefox 4 and other recommended troubleshooting. Need for emergency assistance. Thank you

  About adding attachments to e-mail hotmail, the page does not. On closing program I am informed that the silverlight plugin broke down. Have reloaded and sent reports to both microsoft and firefox, tried all troubleshooting recommended, uninstalled and reinstalled the latest silverlight and firefox 4, but on the attachment after each step into train silverlight continues to crash. Tried the attachment on the yahoo email, same thing.

  It is a question really old, but anyone with this problem should try updating to the latest Firefox and the latest Silverlight. You don't usually see problems when both are up-to-date.

• The problem that may occur when adding a domain to a windows machine.

  "The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for domain 'domainname': the error was: 'the DNS name does not exist.'" (0x0000232B RCODE_NAME_ERROR error code)  The query was for the SRV record for _ldap._tcp.dc._msdcs.domainname common causes of this error are as follows:-records of The DNS SRV to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. "This computer is configured to use DNS servers with the following IP addresses:" in the IP addresses to the IP address of the domain is added, bt still I get the error above all in addind the domain to a windows machine.

  Hello

  Thanks for choosing Microsoft Community Forums.

  As the question is limited to Windows Server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope it helps. If you have problems in the future regarding Windows please let us know. We will be happy to help you.

• No internet connection when I instal KB2360131 explorer 8 Windows Vista...

  As soon as my computer is automatically an update of security for Microsoft KB2360131 I can not connect to the internet and have uninstall it first. I tried to disable the modules but it still not connect to internet... help

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":

  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer to Spybot, Ad-Aware Ad - Watch & guard, guards SpySweeper, etc.), disable any third party (e.g., McAfee) firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #XX below.

  2 Uninstall "Cumulative Security Update for Windows 7 (KB2360131)" or "Microsoft Windows security update (KB2360131)" via start | Control Panel | The Maintenance and the system (if you use Classic view, skip this step). Programs & features | Installed updates day & reboot.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e.KB2360131).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  See the section «How to get help...» "of http://support.microsoft.com/kb/2360131

  For individuals, free support is available by calling 1-866-PCSAFETY (1-866-234-6020 or to the United States and the Canada 1-800-936-5700) or by contacting your local Microsoft subsidiary. There is no charge for support calls that are associated with security updates. When you call, clearly state that your problem is related to a security update and cite the number of KB of the update (e.g.,KB2360131).

  Or you can...

  Start a Windows Update support incident email request for free

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Customers who encounter problems installing Microsoft security updates also can visit the home page CSS for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site

  http://support.Microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Code 80070490 error when you install the Svpac2, KB977165 Windows Vista security update

  Download ok, but then install fails when installing bar happens to sbout 75%. 7 other downloads have managed in the same download package. Tried to install this update only 3 or 4 times with the same result... IN CASE OF FAILURE.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Code 800F0816 when installing Service pack 1 in Windows Vista

  I had an 0146 error code, I replaced the hard drive and installed Vista from a DVD of resettlement. So far, all of the updates has loaded fine. When it comes time to download and install service pack 1, it ok until the end it says that is is unable to load the update and I get and error message stating the Code 800F0816. What should I try to get this pack to load?

  I went on the link. What happens is the Welcome to Windows screen. A little lower I can 'get it now' [Microsoft] Security Essentials...

  Microsoft Security Essentials is available only when the WGA scan does not detect the presence of a valid, fully functional antivirus application.  Yet another symptom of an existing infection (ongoing).

  Your 'copy' of the VAS is installed illegally & will NOT work correctly.

  Do a clean install. After completing the clean install this time (in order):

  1. uninstall the Trend Micro application (which will also be reinstalled, but now invalid) & restart.

  2 download/install Microsoft Security Essentials (free), instead of customer Service: http://www.microsoft.com/security_essentials/default.aspx

  3. launch repeated manual checks for Windows Updates & install updates they are offered (follow all prompts) until you finally got SP2 & all post-SP2 installed updates.

  Do NOTHING else online (e.g., navigation electronic control cat; download/installation of other stuff) until you have completed step 3 above.

  Also do NOT connect the computer to local networks (i.e. other computers) or restore all backed up data.

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Notes:

  => You will not be able go to Win7 unless & until Vista SP1 is installed.

  -Online a manufacturer OEM version of Windows is permanently tied to the computer on which it is preinstalled. You may not use the OEM Win7 disc to upgrade Vista to Win7 computer or do a clean install of Win7.

  Good luck! More & outta here...

• What programs do you need to run it when starting a desktop HP Pavilion Windows Vista-based computer?

  I have several programs running on my start up and am not sure that is necessary and which are not.  I got a slow computer and the performance isn't there as if it was once.  I have recently removed spyware from my computer and wonder if some of these programs may also be the same.  When you run the start up programs are:
  Persistence Module, igfx hkcmd Module, (default), hpwsSchd Application, Kbd Stub & hpsysdrv Module of the drawer.  If you have any suggestions or know of these programs that can affect the performance of my office please answer this and give me your feedback.  Thanks in advance

  You need very little running at startup for any computer and what * you * must will be different from what someone else * needs *.

  Go through the list of things that you have running at the start of the system/user log in using "AutoRuns" and then configure (or remove if you wish) applications you don't want start up accordingly using their own settings (preferable) or seeing their request to start location (registry (, startup folder, etc.) and remove it (last resort) or - if you don't need the app start / all - to remove it through programs and features.

  Since you mentioned the spyware...

  Download, install, update and perform complete system analysis with:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  These two things will help, somewhat, by ensuring that you don't have anything left behind actively running (or in some cases, sitting idle waiting to be triggered.)

• How to find the right combination to open a docx file sent to me? I am running Windows Vista.

  I also have problems with the xlsx files.  What associations do I need? Thank you

  You have Word and Excel on your computer?

  If this isn't an attachment, just skip step 1.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Microsoft Word
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  Repeat to Excel.

• When I play a DVD in Windows Vista, I get all the sounds, but talk of the actors!

  Then, when I play a DVD I can hear music, background noise, etc.  but I can't hear what the actors and actresses.   It's like I hear some audio tapes, but not the actual conversation between actors!  Help, please.  This is true for all DVDs

  Hello

   
  1. what type of program you're using to play the DVD?
  2. have you tried to play with another program?
  3. What is the file format of the video file?
   
  Please provide us with more information on the issue, so that we can help you further.
   
  Before playing a DVD, try to install a compatible DVD decoder, and then try to play the DVD. To do this, visit the following Web site, the DVD decoder download and install it: http://www.microsoft.com/windows/windowsmedia/player/plugins.aspx#DVDDecoder
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• There are so many programs HP listed in my programs. I have Windows Vista

  HP installed so programs on my computer.  Can I remove an any of them?  I have windows vista and a psc 1350 all in one printer?  I can't get even the center of Solution because it does not work with Vista, but every time that I get him, he said I have to keep on.

  Customer experience improvements

  Customer participation program. 8.0

  Easy Frontend implementation

  Function of device HP Imaging 8.0

  8.0 HP OCR software.

  HP Photo Creations

  HP photosmar esentials

  HP photosmart essentials 2.01

  Jet Office HP photosmart, PSC & deskjet

  Detection of the HP Production

  HP Solution Center

  HP update

  Hi Louie.

  HP Photo Creations is a program for creative photo printing. You can use it to do ranging from simple printing of calendars, greeting cards and scrapbook pages at home. You can also use it to design and order gifts such as mugs, posters and photos related to ship books. Here is an example to spread a photo book.

  If none of these is interesting, you can safely remove.

  

  Hope this helps,

  RocketLife

• I got code 80070426 when I try to update my windows vista professional. I tried to start the sistem but I couldn t. An error pops up: "error 0xc004e002, Woindows cannot start the service. What can I do about it?

  Please your help!

  Hello

  It's the usual correction:

  Windows Vista 0 × 80070426 Activation Service not started or Validation not genuine error
  http://www.tipandtrick.NET/2008/Windows-Vista-0x80070426-activation-service-not-started-or-validation-not-genuine-error/

  ---------------------------------------

  You can try to run these to see if they help.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Description of the update for Windows Vista and Windows Server 2008 system preparation tool
  http://support.Microsoft.com/kb/947821

  --------------------------------------

  If necessary to start a free incident report:

  Click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  and follow the instructions.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to perform a reset (or get rid of) the Magnifier that appears on the screen of my Dell laptop when I sign. I use windows Vista.

  I changed the screen resolution expanding the size of the text, but something was wrong with the Magnifier on this machine. Now all and the images are so great, I can't do everything I need on the screen. If I reset the size of the text, I'll live with the size of the text in small print.

  Read this info:

  Narrator:

  Click on start > go neglects Panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > untick the checkbox on Narrator byTurn > click Save.

  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html

  Read the tutorial above re turning power switch of the Narrator.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  On the keyboard of the screen:

  Click Start > Control Panel > accessibility > ease of access Center > use the computer without a mouse or keyboard > uncheck use on-screen keyboard > click Save.

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Read the info in the tutorial above re turn the on / off of the keyboard on the screen.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Magnifying glass:

  Click Start > go to control panel > accessibility > Ease of Access Center > make computer easier to see > now uncheck turn on Magnifier > Finally, click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  Read the tutorial above re turning Magnifier on / off.

  See you soon.

  Mick Murphy - Microsoft partner