Many many order of VALIDATION

Similar Questions

• GoldenGate transactional order of validation

  We have a GoldenGate replicat installer that uses batch inserts to load data. We would like to change this replicat to use the same order of validation as the source applications instead of having an independent validation number. Anyone know if it is possible to configure goldenGate to use the same frequency of posting as transactions of sources?

  Try this:

  GROUPTRANSOPS 1

  By default it is set to 1000, which helps out a lot in performance for single operation operations (or a small number in the game where there are a lot of games). If you have 999 operations and then nothing for a while don't worry; It does not crash. It will make based on the time-out of CHECKPOINTSECS (10 seconds by default).

  Good luck
  -joe

• How many orders 9600 baud can handle?

  I use a motor controller that communicates via a serial port at 9600 baud.  I use the Labview to generate the specific command that we want that the runtime engine, (speed, direction, time, etc.) which is a short string like "/ 1J97E0M\r"each character in the command specifies something to the engine to do.»

  Is it possible to calculate how many times per second an order like this can be sent with data at 9600 baud rate?  For example, it is possible to know the number of bits the string "/ 1J97E0M\r" is?  This value consists of 9600 to calculate the maximum rate command strings that can be sent to the controller?  Is it that simple?

  Thank you

  The number of bits is obvious, but it is not as simple as that. The engine is to interpret the data, Act on it, etc. This response time/max data rate is specified by the seller.

  And please post questions similar to the instrument control Commission. This has nothing to do with the digital I/O products of NEITHER.

• Error of TCP connection when sending MODBUS for WAGO controller 750-881 orders after 113655 bytes of data have been sent

  Hi all

  I'm new in the world of labview and trying to build a VI that sends commands to a controller of the WAGO 750-881 at regular intervals of 10 ms.

  To set each of the WAGO comics at the same time, I try so to send the Modbus fc15 command every 10ms using Labview standard TCP write module.

  When I run the VI it works for about a minute before receiving an error message 56 telling me the TCP connection has expired. This strange thought, I decided to record the number of bytes sent via the TCP connection while running the program. In doing so, I noticed that the link broken after exactly 113655 bytes of data have been sent each time.

  Thinking can I have sent too many messages, I increased the delay of the loop of 10ms to 20, 100 and 200 ms, but the error remained. I also tried to play with the TCP connection timeout and the writing TCP timeout, but none of these had no effect on the problem.

  I do not see why this error occurs, such as the program works perfectly up until what brand 113655 bytes.

  I've attached a screenshot of the base VI (simply showing a MODBUS command sent every second) and a more advanced VI (where I am able to control each of the WAGO manually by setting a frequency at which the DO is to switch between ON and OFF).

  If anyone has any ideas on where the problems lie, or that I could do to debug more program this would be greatly appreciated.

  AvdLinden wrote:

  Hi ThiCop,

  Yes, the error occurs after exactly 113655 bytes each time. Time-out control, I would like to use is 10ms, but even that will rise to 1 s or 10s does not error, which leads me to believe that's not the issue (as well, do not add any delay in the while loop, so let it run at the maximum speed showed that the TCP connection is able to send all the bytes 113655 in less than 3 seconds again directed towards control of time-out) is is not the issue here).

  I tried the suggestion of Marco but having difficulty to translate the string returned in a readable string (rightnow the answer given is "-# +" ' ").

  As for your second suggestion, I've implemented something similar, where I created a sub VI to establish a TCP connection, send a message and then close the connection. I have now to build each message and then send the string to the Subvi, which sends the command to my application successfully. While not the most elegant method to solve the problem, it solves the problem of time-out, which means that I am able to send as many orders as I want. So in this sense, the problem has been resolved.

  If you have advice on how to properly read the TCP read the output, I want however to see if I could not get my first program to work because it is slightly more robust in terms of timing.

  MODBUS RTU TCP is a binary protocol, as you show in your base VI, where you put in the form the data stream using byte values. So you have to interpret the returned answer accordingly with the Modbus RTU spec in the hand. Now what is probably happening is that the connection is suspended after a while because you do NOT read data from the device sends as response to your commands. The TCP/IP stack cushions these bytes and at certain point of overflow internal buffers and the connection is blocked by the battery. So to add playback of TCP in strategic locations (usually after each entry) is the right solution for this. Is there a reason any that you do not use the PROVIDED Modbus TCP library?

• How do I 'batch' closing of a large number of virtual machines on a single order?

  We have performance issues with some programs that a large number of machines virtual shutdown.  Steve Jin here mentions on his blog that there is a number of API and batch processing.  I can't find on the subject if and would just like to send a command to stop, a large number of virtual machines.  Multi-threading applications for judgment has not been effective or possible.

  If someone could point me to the right direction, I would be grateful.   Thank you!

  Sean Clark - vExpert 2009, VCPX3 - http://twitter.com/vseanclark - http://seanclark.us - http://vmunderground.com

  Hey Sean,

  I'm not familiar with batch API too many orders, but I'm guessing that you're referring to:

  Turning the power on

  • Single - PowerOnVM_Task

  • Multi - PowerOnMultiVM_Task

  Power off

  • Single - PowerOffVM_Task

  • Multi - as far as I know, no

  As you probably know, there are a lot of API command to power on a set of virtual machines, but there is not one to turn off. It maybe an internal/private API to power off the coast, but I have not heard/seen it.

  If your question is around Steve Jin VI Java API, maybe hit him up on top of this blog, you probably a more precise answer and if this isn't the case, I think he'll be able to help directly as well.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Trying to customers who place an order only by email.

  Im trying to create a report of my clients who have just placed an order in the past so I can create an email campaign. This will help me to build customer loyalty.

  If one knows how I can create a report that will filter the customers who have placed more than one order, please let me know.

  Thank you

  Sam Hashem

  www.Hashems.com

  Hi Sam,

  Unfortunately, we do not have a filter that will pull only customers who have a single command.

  The only solution is to produce a report "customer & arrested" and export.  Then in the Excel filter the report by visitors to see how many orders each customer can have.  If more than one you can simply remove them from the exported report.

  Then you take the update report and imports to realize that you need a new mailing list (must match the import marketing list model).

  Kind regards

  -Sidney

• Validation rule is not suitable for the calculated figure

  Hello
  
  I want to add a validation rule in my data form. My requirement is in the form of data, I want the value of line 2 should be greater than (value of line 1 * 0.2).
  Now when I am trying to solve this problem through validation rule I do not find these conditions that are consistent with this case. Is there a way to get out of this scenario in order of validation?
  
  Thanks in advance.

  Hello. So you have at least two segments in your dataform (line1, line2)
  As we cannot make math operators with cell values in the validation rules, it seems that you must create formulas row3 (with the hide option)
  It's very simple, as follows: [1] * 0.2
  And then, you can create your validataion rule:
  Value of the row IF 2<= row="" value="">
  Then the cells of process...

  You can also include additional conditions for missing values in lines 1, 2, as appropriate

• Failed to retrieve attribute values when executing the validation on update

  IAM trying to do validation on user create and update operations:
  
  currently able to perform validations on iam create user operation
  (Note: my validations require organization name which iam get using form user act_key only)
  
  but when I try to trigger the same code for update, it do not recover key, infact the same code does not even get attribute values.
  given that I don't get any key of the organization. together to update validation failed.
  
  My EventHandler.xml looks like this:
  < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" >
  
  <!--> custom validation event handlers
  <-validation Manager
  Class = "test. IOM. EventHandler.UserFormFieldValidation ".
  entity-type = 'User '.
  operation = "CRΘER."
  name = "UserFormFieldValidation".
  order = "1000" / >
  
  <-validation Manager
  Class = "test. IOM. EventHandler.UserFormFieldValidation ".
  entity-type = 'User '.
  operation = 'CHANGE '.
  name = "UserFormFieldValidation".
  order = "1000" / >
  < / eventhandlers >
  
  Please suggest what needs to be done in this case.
  Note: iam using the same code for postings of these two operations (operation to create and update the operation of user profile)
  
  Thanks in advance

  as mentioned above:
  get the key of the user and then get the name of the organization.

  You can get the params modifed by using:
  HashMap orchVal = orch.getParameters ();

  You can use this to get the fields that you can still use to your validation.

  Note: If you change an attribute and do not send any value he always added to the card with the value null.

  It may be useful

• To its relevant xml schema xml file validation error

  Hi all
  
  I have 3 files to schema files to xml where I generated an XML using PLSQL. I get this error when I try to validate the xml schema file:
  ' ' * WMWROOT ' UNDECLARED *. Can someone help me with this, I included the main schema file and also the generated XML.
  
  XML schema file:
  
  Itemdownload.xsd:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < xs: Schema id = "Elementtelecharger" targetNamespace = "http://www.manh.com/ILSNET/Interface" elementFormDefault = "qualified".
  xmlns = "http://www.manh.com/ILSNET/Interface" xmlns: XS = "http://www.w3.org/2001/XMLSchema" version = "2007" >
  < xs: include schemaLocation = "Item.xsd" / > "
  
  < xs: element name = "WMWROOT" nillable = "true" type = "WMWROOT" / >
  < name XS: complexType = "WMWROOT" >
  < xs: SEQUENCE >
  < xs: ELEMENT minOccurs = "0" maxOccurs = "1" name = "WMWDATA" type = "WMWDATA" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  
  < xs: element name = "WMWDATA" nillable = "true" type = "WMWDATA" / >
  < name XS: complexType = "WMWDATA" >
  < xs: SEQUENCE >
  < xs: ELEMENT minOccurs = "0" maxOccurs = "1" name = "Items" type = "ItemList" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  
  < xs: element name = "Items" nillable = "false" type = "ItemList" / >
  < name XS: complexType "ItemList" = >
  < xs: SEQUENCE >
  < xs: ELEMENT minOccurs = "1" maxOccurs = "unbounded" name = "Item" nillable = "true" type = "Item" / >
  < / xs: SEQUENCE >
  < / xs: complexType >
  < / xs: Schema >
  
  The generated xml file is:
  
  <? XML version = "1.0"? >
  < WMWROOT >
  < WMWDATA >
  elements <>
  < item > < Action > save < / Action > < UserDef8 > 10074 < / UserDef8 > < Y Active > < / assets > < AvailableOnWeb > N < / AvailableOnWeb > < company > OR: ResMed Corp < / company > < cost > 285.93 < / cost > < Desc > HP DESKJET PRINTER (EMBLA) < / Desc > < HarmCode > < UserDef8 > 10074 < / UserDef8 > < / HarmCode > < point > R145-794 < / Item > < InventoryTracking > Y < / InventoryTracking > < LongDesc > HP DESKJET PRINTER (EMBLA) < / LongDesc > < LotControlled > Y < / LotControlled > < SerialNumTrackOutbound > 7 < / SerialNumTrackOutbound > < StorageTemplate > < model > each < / model > < / StorageTemplate > < xrefs > < Xref > < XRefItem > < / XRefItem > < / XRef > < / XRefs > < / Item >
  < item > < Action > Save < / Action > < UserDef8 > 80862 < / UserDef8 > < Y Active > < / assets > < AvailableOnWeb > N < / AvailableOnWeb > < company > UO: ResMed Corp < / company > < cost > 54.27 < / cost > < Desc > Mirage Micro mask MED & amp; LG-Internet Pkg < / Desc > < HarmCode > < UserDef8 > 80862 < / UserDef8 > < / HarmCode > < point > 16359 < / Item > < InventoryTracking > Y < / InventoryTracking > < LongDesc > Mirage Micro mask MED & amp; LG-Internet Pkg < / LongDesc > < LotControlled > Y < / LotControlled > < SerialNumTrackOutbound > N < / SerialNumTrackOutbound > < StorageTemplate > < model > each < / model > < / StorageTemplate > < xrefs > < Xref > < XRefItem > 619498163597 < / XRefItem > < / XRef > < / XRefs > < / Item >
  < / object >
  < / WMWDATA >
  < / WMWROOT >
  
  I can provide you with 2 other if necessary dependent schemas. Please answer me!

  I don't know how this issue applies to the XML DB, but I'll answer anyway.

  Your schema resides in the
  targetNamespace = "http://www.manh.com/ILSNET/Interface."
  namespace, so by default, all definitions can be found in this namespace
  The generated XML is in no namespace. That's why you see the error
  'WMWROOT' UNDECLARED
  Since the schema has no definitions in the same XML namespace uses. You must put your XML file in the same namespace as the schema in order for validation to work, through the
  xmlns = "http://www.manh.com/ILSNET/Interface."

• On OE_ORDER_PUB. The PROCESS of ORDER API settings

  The OE_ORDER_PUB. PROCESS_ORDER API has several parameters IN. There subscription contains a few settings of val , known as a value parameter, I don't know what are these parameters of value in the API and how to use them. What and how do they affect the order that is created.
  Some of these parameters are
  p_header_val_rec
  p_header_adj_val_tbl
  p_header_scredit_val_tbl
  p_line_val_tbl
  ...
  ...
  ...
  
  Any input on this is much appreciated.
  
  Thanks in advance,
  Suresh

  Suresh,

  My only concern was that mean these... val_... variable _. What is the purpose of these parameters in the API, because most of the time give us as a null value, or do not use it as default value is null.

  It is documented in [Oracle order management of the open API, Interfaces Guide e-mail & | http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115omapi.zip], Page 2-70 - settings through values.

  Also, I think that the API does not create a partial order, if fails a single line all sales order is not created, is there a way partially create sales order with valid lines.

  For this part, sorry I can't be of help.

  Kind regards
  Hussein

• I'm a quadriplegic tries to use Siri... A lot of problems

  as a quadriplegic, I try to use Siri, but there are too many orders which must go hand in hand with physical contact of the phone. I can't do it. There is no way I know to hang up the phone, the use of the tree of voices when you call a company, change the messages you are trying to send off alarms... And that's just the beginning. Is there anyone else in this situation?

  Also, can you point me to a better guide for the use of Siri only hands-free?

  Thanks - Doug

  To be honest, I'm not aware of a guide especially for the use of Siri without hands. You happen to use a stylus for something else that you can hold in your mouth? If this is the case, you can find a pen that you can use with the iPhone, but it will still be difficult. Unfortunately, I'm not aware of how to use the iPhone completely through voice commands. It still seems to be necessary to a certain kind of touch at a certain time.

  Have you tried to contact Apple and see what they have to say that their accommodation of accessibility is concerned?

• The card using PCI-GPIB hangs the system (Windows 7)

  Hello

  I am running Labview 11.0 (32-bit) on Windows 7 (64-bit) computer and card PCI-GPIB to communicate with instruments.

  Can I use GPIB to send commands to the device, but when I used "Measure and Automation" and analysis of the instruments he runs right first time, but if I scan again the system crashes completely (no reaction to any seizure).

  Same thing happens if I use I/O Assistant VI, I can get a response from the instrument and on the second call, the system hangs. Yet, I can send as many orders without any problem, so the source is in the reading stage.

  The PCI-GPIB card worked perfectly well for years on another computer running Windows XP.

  Someone already had this problem and what can be the source of it?

  I had a similar problem, but I just found out that the motherboard was not good...

  Try in another computer... Optionally, you can uninstall and install back the NI 488 drivers. 2...

  -Germain

• run the vba without compiling vi gets error 13 type mismatch

  Hello

  I am trying to use VBA to access Agilent 33250 vi driver code.  I followed the examples in the forums, but I'm not sure why I get "Run Time error 13' type mismatch.

  Void LabVIEW()
  Protected String filepath
  Dim lvapp As Application
  Dim vi VirtualInstrument
  Dim ParamNames (0-1) As String
  Dim ParamVal (0-1) have varying

  Set lvapp = CreateObject ("LabVIEW.Application") ' create the connection to labview
  FilePath = "C:\Program NIUninstaller Instruments\LabVIEW 2013\instr.lib\Agilent Output.vi Series\Public\Action-Status\Enable 33XXX.
  VI the value is lvapp. GetVIReference (filepath) ' load vi

  ParamNames (0) = "VISA resource name.
  ParamNames (1) = "activate the output (T: Enable).

  ParamVal (0) = "GPIB0::10:INSTR".
  ParamVal (1) = True

  VI. FPWinOpen = True
  VI. call ParamNames, ParamVal

  lvapp. Quit smoking

  End Sub

  Any suggestions?

  Thank you

  I never called LabVIEW in VBA.   But I do not know LabVIEW and I do not know VBA.

  I see one of the two possibilities

  1. the string for the name of the resource does not work for the VISA resource setting or the Enable parameter do not like the real.

  2. are there that many order entry?  Do you need to assign a parameter and a value for each control on the Agilent VI?  I do not know.  Perhaps the VI guess just the default just as if you put a wire into a Subvi.

  # 1.  Break the smaller code.  First of all, just to make the VISA resource and comment the Enable parameter and value.  Then try again with the resource VISA and guided value and assign the parameter enable (0) and value (0).

  See if that one or if these two still triggers the error.

• Column data reading according to the number of lines

  Hi guys,.

  I am currently stuck on the problem of recovering the data from my database (MS Access) according to the number of lines, he has at any time (without having to know how many lines there will be during the programming of this part).

  First, I show how my program works. I'm working on an automated food, order and after the customer has chosen his power, system information such as the name of the food, quantity and price of the food will be written to the MS Access database table. (for example table name "Orderingtable" in MS Access) For my case, 1 order of food will occupy 1 line of the database table. In other words, as part of the same, if he orders 3 different foods, 3 rows will be filled in my database table.

  I would then get the part number of 'Quantity' for each order of the database and summarize the amount finally to count the total number of orders in the table of database at any time. This addition of result will be then shown on the Panel before informing the customer how many orders waiting's just prior to his order. In this case, it can get out if he wants to, if the number of orders is too big for its waiting time.

  However, I do not know how many lines my 'Orderingtable' will be 'Orderingtable' because both accumulate lines and data lines until being command to remove. Therefore, I cannot predict how many lines I program the party totals the number of quantity for each line.

  Is it possible that I can get the part of the 'quantity' without having to know the number of rows in the database so that I can count the total number of pending orders just by adding up the value of the quantity for each line?

  I do not wish to "code" my program by limiting the tables of database for us are going to say, only 50 lines at any time.

  Attached below, this is how my database table "Orderingtable" looks at, which will be used to extract the 'Quantity' column so that it can count the total number of orders and be shown/shown on the front panel of my Labview program.

  I hope that you are able to help me!

  Thank you so much in advance.

  See you soon,.

  MUI

  You can also use the SUM function:

  SELECT SUM (Quantity) OF the order WHERE Queue_No = %d

  And no need of an "Order By" clause, if you add just the quantities.

• Outlook express 6 error 0x8xxccc6f - Email is not sent

  I get the following error message when I try to send email from Outlook Express 6. the email is not sent. How can I fix it?

  An unknown error has occurred. "Account: 'POP3', server: 'SMTP.cox.net', Protocol: SMTP, server response: ' 554 eastrmimpo306.cox.net bizsmtp bad too many orders of 72.213.56.10 ', Port: 25, secure (SSL): no, Server error: 554, error number: 0x800CCC6F

  Check via webmail and ensure that webmail access works.

  Then remove interference antivirus and make sure that your antivirus software is not defined on analyze them (see www.oehelp.com/OETips.aspx#3).

  So try to go to file | Identities and setup a new identity.  Then try to add your account and see if it works.

  Steve