map of Cisco network topology first Infrastructure

Similar Questions

• List of Cisco serial number first Infrastructure 2.2 stock for maintenance contract

  How can I get an inventory report with the correct serial number for each device that is necessary for a maintenance contract?  In fact, I would have preferred a way to do with the REST API, but a report will work.

  Thanks for any help.

  Dave

  Many things should be at PI, but aren't. This is one of the reasons why there is no compelling market share, even in stores all-Cisco.

  He made a few near things very well everything is strangely unable to do other seemingly simple things that are looking for the many shops of their network management tool.

  That said, you can get the details of the inventory of the REST API, although I don't have scripting skills to analyze it automagically.

  Reach:

   https://your_server/webacs/api/v1/data/InventoryDetails

  And who will list on all individual devices in your inventory of PI. In every detail of the device page will be a whole host of information, including the serial numbers of the devices (even including all members in the stacks of the switch).

  rest_api_inventory.PNG

  

  You can also run a report through "reports > report boat launch > device > detailed Hardware > new detailed material" and get a list of all of your devices, including serial numbers.

  Or we will say automatically that you status of the contract of service however.

• Cisco first Infrastructure 3.1.3 - patching

  Hello

  a customer has installed a traditional life cycle license, ICC running the 3.1 version. We would like to upgrade to version 3.1.3.

  According to Cisco, ICC 3.1.3 supports the licensing model based on the chips for the cycle of life and insurance licenses. License consumption is based on symbolic weight by device type.

  ICC 3.1.3 takes to support the generation of a file single license with rights acquired to manage existing devices without having to purchase additional licenses. This special privilege is provided to existing customers as a one-off during the first Infrastructure 3.1.3 update installation.

  Does someone of you could advise me the way how to obtain such a license?

  Thank you very much.

  Jozef

  There is no need to change the license type if your existing licenses extend on your managed devices.

  I have updated three separate facilities from 3.x PI to 3.1.3 without changing the type of license.

  If you want or need to do, then open a TAC case, asking permission to support and licensing team will take care of him for you.

• Cisco first Infrastructure 2.2 API GET Interfaces

  Hello

  I am using Cisco first Infrastructure 2.2 and I am trying to get some info of the API in order to build a model.

  But I can't find how to get the name of all the interfaces of an IP address from the device. I tried many queries, but none of them is what to expect. Is there a way interfaces?

  Thank you.

  Guillaume.

  Hello, don't 'SE InventoryDetails' gives you what you need? I believe you can use the features of REST to filter down to only the devices you are interested.

• Help with M6348 connecting to a Cisco network

  Hello

  Can someone help me with best practices by putting R710 via a M6348 stacked with a cisco network.

  Our configuration is the following

  M1000e

  2 x 1 GB pass-through fabric a

  2 x M6348 wired in a pile in the B fabric

  6 x popular R710 with four NIC ports in the fabric B (3 are general purpose servers, 3 are Hyper-V servers in a cluster)

  Cisco network

  For most of the Cisco 3560 switches

  20 VLAN (1 per building) configured, mainly for the isolation of traffic (VLAN 300-320)

  What (I think) that we want to

  The M6348 connect to the core network in a SHIFT (4 x 1 GB ports. Can it be divided 2 ports each of the stacked M6348?)

  Have a mapping of right for 1-3 to VLAN 301 R710

  Configure R710 4-6 for access to all VLANS for the Hyper-V hosts can be placed on the VLAN correct

  Use the fabric for the connection to the San

  Network management is carried out by a third party (we are unable to change this) and they claim that they are unable to connect Cisco/Dell!

  We are server guys, guys network no, so something stupid (especially for Cisco to give to our management company) would be appreciated.

  We tried to configure the switches in Simple mode, using a Dell deployment guide, but all we seem to get is the default VLAN to all ports on the switch 1 battery, but no other VLAN and no active port 2 in the stack.

  I've probably missed lost info on and were not very clear, so if more info is needed, please get back to me.

  Thanks in advance for the help

  Rich

  Thanks for the information updated, actually, this confirms that the problem is with the connection to the Cisco switch. Is that what we tried a general link, instead of trunk?

  mode console # switchport general

  Console # switchport General allowed vlan add 300-320 tag

  Console # pvid General switchport 301

  Console # end

  Are we sure that the VLAN 301 IP address is 10.49.56.0? This doesn't seem fair.

  When we try to pings on the trunk/General connection to the Cisco switch, make sure you that the servers have the default gateway defined on the VLAN IP address they are in access mode. Thus, when in the access mode VLAN 301 the gateway server would need to be 10.49.56.0. I would like to verify that the IP address, however.

• Cannot connect Cisco Network Assistant to 2911 router

  I'm trying to connect my Cisco 2911 router to my community at the NAC.  I can see the routers in terms of topology, but when I try to add to the community I get an error message indicating that the router is inaccessible (cannot connect).  I can ping client device of soul. I can view the properties of the device to the card (device type: CISCO2911/K9). Telenet attempt connection, but we have only use SSH for connectivity (the same as all my switches that are connected to the community).  2911 is listed as a taken router supported on the Cisco site.

  Any quesses what I am doing wrong?

  Thanks in advance.

  J

  Hello
  You must enable http for can work.

  http://kirkpbm.WordPress.com/2008/07/13/Cisco-network-assistant-enabling...
  Pls link for other instructions above check.

  Rgds/DP
  Sent by Cisco Support technique iPad App

• Home network Windows 7 and XP: can map drives etc network but not to synchronize OneNote

  Hi all

  I have a Windows 7 laptop and a desktop XP SP3, all connected with happiness to a wireless router. On both machines, I have the very underrated and generally wonderful notes 2007, which I rely on for the study. I'm reasonably texh-savvy, but I don't know what I don't know, so it is very likely I missed something very obvious.

  I can update my OneNote notebooks on the Win 7 to XP machine fine machine, but the Win 7 machine does not update the notebooks on my XP machine without asking for a password.

  I checked the following:

  • They both share the same group, the WORKING group.
  • The OneNote Notebooks folder properties have 'action' and 'allow other users to update' boxes ticked on the tab share
  • The Windows 7 laptop can 'see' the Office XP on the network, but by double-clicking on the icon on desktop XP asks for a password
  • When you look at the map of the network, the XP machine is nestled on the corner and not shown to be 'joined' to the router
  • Portable Win 7 I can map a network drive by using the IP address to a shared folder on the XP machine and move files without any problem
  • "File and Printer Sharing" on the Panel of control-> connections-> 'Properties of the wireless network' network is checked
  • Both machines have static IP addresses
  • I don't put passwords for each machine
  • My computer-> tools-> Folder Options-> enable Simple file sharing is checked
  • Guest account is enabled on the XP machine
  • Password protected sharing is DISABLED on the Win 7 machine

  I suspect that there is something that I have not checked/unchecked somewhere on my XP machine.

  Why is the Win 7 computer phone harassment me a password when you try to synchronize a OneNote or click the icon under 'network '?

  Y at - it an exhaustive list of things that I should check or an article somewhere that covers this? I googled loads, but only have mounted artuicles cloud sharing with OneNote 2010 and sharing of files between Windows 7 and XP, nothing on a password is requested during the synchronization of the OneNote files!

  Thanks in advance for your help. I know the legacy tech support is a royal PITA, and I promise you that I will be upgrading to a more sensitive setting when I have the dosh, but in the meantime, I would appreciate some advice! :)

  Hi dogsolitude_uk,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

• I have a drive mapped to the network, but the icon is located in a folder. I get access denied when I click on the drive.

  I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp

  original title: mapped drive error.

  Hello

  Make sure that the mapped drive is configured to share and works on part.

  Auto-mappage will not work if there is a problem with sharing.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• How to disable the automatic mapping of the network on the windows xp computer drives

  I have a win xp computer, where it has been installed a drive mapped automatically connect after logon.

  How can I stop it automatic mapping of the network after restarting the computer drive?

  At a command prompt:

  NET use / persistent: no
  NET use * / delete/y

  Removes the persistence of the connection and delete all network resources.

  You can be selective with this:

  NET use / persistent: no
  NET use x:/delete

  where x: is the drive letter of map you want to remove.

  Persistent readers are recorded to the:

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Network\Persistent connections

  John

• Using CDP to create the network topology diagram

  Hi all

  I'm a beginning network specialist and just thought I would throw this question and see if I can get some answers.  Well, I want to know how I can use CDP to find out our network topology so I can create diagrams and Visio diagrams, or if you know any free network discovery programs out there that can help?  Hey well any comments will be appreciated so thanks in advance and I look forward to hear something!

  When you run 'sh cdp neighbors' it shows you all the devices connected directly. If you then "sh cdp neighbor detail" for each entry it will show the IP address of the connected device. You can then connect to this and do the same thing all the way throiugh your network.

  I think that the COP may be useful for this, but you're relying on the CDP running on all devices. Sometimes it has been disabled for security reasons one must always be aware that there may be devices that do not display.

  As mentioned SNMP is another alternative, but still once, this assumes that SNMP has been put in place the device esch.

  So just be aware that you can not always get the full picture, but a combination of--

  (1) CDP

  (2) SNMP

  (3) running the determination of route router hops show but not L2 switch.

  You should get most of the information. Also, be aware that the internal firewall tend to dirty such things as well.

  Jon

• Cisco Network Assistant

  Hello

  Anyone know how really peripheral can be added in the community and manage through CNS version 6? I read on the website of cisco that Cisco Network Assistant can support up to 40 aircraft in the community, I don't know if it was for the previous ANC 5.0 version as shown in the link http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-assistant/product_data_sheet0900aecd8068820a.html for switches 40 or less while watching in the version 6.1 of the ANC data sheet , he also mentions the community limiting to 40 devices while the following link http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-assistant/datasheet-c78-730210.html shows that for switches 40 or less. Will be looking forward to seeing the answers.

  Thank you

  Waydee

  Hi Waydee

  Please refer to the for Cisco Network Assistant Release Notes 6.0 and later versions , where you can find all of the changes. In summary the community limits are same (max 40) compared to the old version (5) of the CNA.

• Deletion of a project in insight source (trial version) that has been mapped to a network drive results in the Stop error code 0 x 00000027

  Deletion of a project in insight source (trial version) that has been mapped to a network drive in clearcase... .the deleted when I got this error...

  Kindly give me a solution...

  Original title: error code 0 x 00000027

  At the error repeated or leave all the undesirable consequences? Unless there is probably not merit to be investigated further.

  Verification of bug code 0x27:
  http://msdn.Microsoft.com/en-us/library/ff557446 (v = vs. 85) .aspx

• Cisco Network Assistant 5.5

  I downloaded Cisco Network Assistant 5.5, every time when I try to run I get the error message "can't creat Java virtual Machine"any idea how to solve this problem? ".

  I  downloaded Cisco Network Assistant 5.5, everytime when I try to run I get error message "Could not creat Java virtual Machine' any idea how to solve this?

  To work around this problem, open the file C:\Program Cisco Systems\CiscoSMB\Cisco network Assistant\startup\startup.properties (the default installation path) and modify this entry:

  JVM_MAXIMUM_HEAP = 1024 m

  Replace 1 024 m with a bass that does not exceed the available RAM. There is no way to predict what value will work. Try 512m and drops even if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to set your own dial peers.

  Go to the link for more information below

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html

  Hope to help!

  Ganesh.H

  Don't forget to note the useful message

• Cisco first Infrastructure 2.0 is compatible with the Hyper-V environment?

  On version 2.0 first Cisco Infrastructure. It is now possible?

  First requires ESXi:

  http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/QuickStart/Guide/cpi_qsg.html#wp46865

• CISCO FIRST INFRASTRUCTURE 2.2

  Dear Sir.

  We have purchased preferred infrastructure cisco 2.2 and have just download the software:

  2.2 preferred infrastructure the physics of ISO Image (from GEN 1 device only)

  PI - APL - 2.2.0.0.158 - 1 - K9.ISO

  This is the first time, we will install the first cisco.

  the user has a server with all material specifications recommend for GEN1 and the installed operating system is WINDOWS 7 Professional.

  2.2 first cisco infrastructure will run on this server without any problem?

  awaiting your response earlier.

  Roger

  N °

  This image will only install and be supported on the Cisco Gen 1 (hardware OEM IBM) brand device.

  ISO is self-contained and designed to be installed on this server bare metal only. It includes a distribution of Linux RHEL custom as the operating system. It has built in and not configurable pilots to accurate NICs, hard disk drive controller and configuration etc.

  You should be getting version 3.1 in the form of open virtual appliance (ova) and the installation on a server with VMware ESXi.