CISCO FIRST INFRASTRUCTURE 2.2

Similar Questions

• Cisco first Infrastructure 2.2 API GET Interfaces

  Hello

  I am using Cisco first Infrastructure 2.2 and I am trying to get some info of the API in order to build a model.

  But I can't find how to get the name of all the interfaces of an IP address from the device. I tried many queries, but none of them is what to expect. Is there a way interfaces?

  Thank you.

  Guillaume.

  Hello, don't 'SE InventoryDetails' gives you what you need? I believe you can use the features of REST to filter down to only the devices you are interested.

• Cisco first Infrastructure 3.1.3 - patching

  Hello

  a customer has installed a traditional life cycle license, ICC running the 3.1 version. We would like to upgrade to version 3.1.3.

  According to Cisco, ICC 3.1.3 supports the licensing model based on the chips for the cycle of life and insurance licenses. License consumption is based on symbolic weight by device type.

  ICC 3.1.3 takes to support the generation of a file single license with rights acquired to manage existing devices without having to purchase additional licenses. This special privilege is provided to existing customers as a one-off during the first Infrastructure 3.1.3 update installation.

  Does someone of you could advise me the way how to obtain such a license?

  Thank you very much.

  Jozef

  There is no need to change the license type if your existing licenses extend on your managed devices.

  I have updated three separate facilities from 3.x PI to 3.1.3 without changing the type of license.

  If you want or need to do, then open a TAC case, asking permission to support and licensing team will take care of him for you.

• Collection of newspapers from Cisco first Infrastructure

  Hello

  I am currently working in integrating Cisco first Infrastruture with Qradar siem tool.

  Can someone help me out below questions:

  (1) how and where is the paper stored in Cisco first. ?

  (2) newspapers contains logs first Cisco devices manages?

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Hello

  (1) how and where is the paper stored in Cisco first. ?

  / opt/CSCOlumnos/logs

  (2) newspapers contains logs first Cisco devices manages?

  AS FAR AS I KNOW,

  Infrastructure main Syslogs are directly read the 514 and then filtered udp port
  , no SEV1 and SEV2 syslogs are removed and not be exchanged from db. The
  syslog messages will not be saved in files.

  So far, PI support only syslog SEV 0,1 and 2.

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Unfortunately, this feature is not there in PI so far.

  Thank you-

  Alya

  Ratings encourage contributors *.

• Cisco first Infrastructure 2.0 is compatible with the Hyper-V environment?

  On version 2.0 first Cisco Infrastructure. It is now possible?

  First requires ESXi:

  http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/QuickStart/Guide/cpi_qsg.html#wp46865

• Cannot add WLC 5508 7.2.111.3 Cisco first Infrastructure 2.0

  Although the list of the Cisco Infrastructure compatibility matrix first on this 7.2.111.3 is supported for PI 2.0

  I'm not able to add the controller to the PI 2.0.

  The State of accessibility has always shown "Unknow" and the situation always SNMP "no answer for SNMP Get."

  There is no firewall between the WLC and PI.

  And ping test shows that it is accessible.

  If I try to add the controller to port managers (I know it's not working, but I want to try the accessibility), the State of accessibility showed "Reachable" but the SNMP State always demonstrated error.

  And if I use some SNMP test software to test the SNMP port. SNMP can be cited.

  I try down below the "Maximum VarBinds get PDU" but no luck.

  Something I can do to solve the problem?

  Hi, please check on wlc 5508:
  have you enabled snmp on wlc?

  mrncciew.com/2013/02/14/configuring-SNMP-on-WLC/

  Concerning
  Please rate if this can help

  Sent by Cisco Support technique iPhone App

• Cisco first Infrastructure 2.2 DVD installation fails

  We want to migrate to 2.2 first, but management does not want downtime of the device. Try to install the first 2.2 via DVD on a Dell R300 server and then import config of our apparatus to test questions. However, the NCS installation fails due to a problem file. Second burned DVD fails as well. Has anyone tried this before? Using a virtual machine (at this stage), is not an option.

  I have not tried, but don't wait until it works.

  The .iso (DVD) image is tailor-made for the installation on the device of Cisco NCS material. To install on any other material, you must first have the VMware ESXi hypervisor and install using the .ova image.

• Backup folder Configuration Cisco first infrastructure 2.0?

  Hi all

  where is the backup devices folder in PI 2.0 configuration, I tried searching with winscp for *.cfg but have not found anything.

  the most funny thing is when I am connected via the WEB (GUI), I can see the configurations of devices (under configuration of archive).

  so anyone know where is the file?

  Thank you

  Dawit

  Hi Dawit,

  https://supportforums.Cisco.com/message/3975460#3975460

  check the thread above, hope this will answer your query...

  Thank you-
  Alya
  [Note the useful post]
  Ratings encourage contributors *.

• Page Images software Cisco first Infrastructure 2.2 broken after installing patches

  Earlier today, we installed 2.2.1 POODLE Fix (1.0.0) PI and PI 2.2.1 updated corrective (1.0.0) on 2.2 of the ICC. After reloading, we get status 404 when you navigate to the inventory > Device Management > software image.

  Also found this error in the Chrome development tools:

   Error: Unable to load applications/swim/jsp/ImageRepositoryTable.jsp?id=/ status:404

  Does anyone know how to fix this?

  Hello

  You will need to open a TAC case to get the patch published for you.

  Stephen

• Infrastructure 2.0 Cisco first deployment models

  Hello world

  I wanted to deploy a configuration model 'first infrastructure 2.0. I tried with the output of the model "banner Configuration-IOS" box. I have deployed it to a device that is a switch to Cisco Catalyst 2960 - 24PC - L. I chose "Add" in the menu dropdown 'Connection Action' and typed in 'Test' in the field 'login Message. All the rest is the default value. After you apply the changes, I clicked on the Ok"" button. After this IP trying to deploy the model configured on this device. A few seconds later the 'Last Run status' column in the 'jobs' dashboard, said "failure." The 'summary', said:

  "Error in the execution of XDE procedure, Error Message::No 'CLI_ENABLE_PASSWORD' attribute for the device"2344372"

  I tried to figure it out and searched the Internet but I couldn't find a solution.

  Thanks in advance for your efforts!

  Have you confirmed that the enable password is correct in the credentials of the device? (Device Center, select and modify the devices)

• Issue of integrating Cisco first Collaboration insurance LDAP

  Hello

  I 9.0.0 - 24376 Cisco first coverage of Collaboration with lot of fixes 3, and although I added the LDAP protocol successfully to the server of the CPCA, and when I do the connection test it gives me connection is successful with the LDAP server, then I added users to the management of the users using the same user name as the user account on the LDAP protocol and LDAP user check.

  but when the user tries to connect to the CPCA using his LDAP account an error message saying that the user name or password is incorrect.

  If the ideas please?

  Insurance server connects with CN, not sAMAccountName in the LDAP server, make sure that you type in the user name as "John Doe" instead of jdoe.  Check if it works.

• map of Cisco network topology first Infrastructure

  Hi just want to ask if it is possible to create a map of the network topology of edge of the main cisco which shows the cable devices and wireless infrastructure, or do we need another cisco product to accomplish.

  Thank you

  Hello

  Topology service is not supported in 2.0 IP, however, it is in the road map.

  for the support and the function of the comparison, you can check out the link below:

  http://www.Cisco.com/en/us/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html

  Thank you-

  Alya

  [Note the useful post]

• List of Cisco serial number first Infrastructure 2.2 stock for maintenance contract

  How can I get an inventory report with the correct serial number for each device that is necessary for a maintenance contract?  In fact, I would have preferred a way to do with the REST API, but a report will work.

  Thanks for any help.

  Dave

  Many things should be at PI, but aren't. This is one of the reasons why there is no compelling market share, even in stores all-Cisco.

  He made a few near things very well everything is strangely unable to do other seemingly simple things that are looking for the many shops of their network management tool.

  That said, you can get the details of the inventory of the REST API, although I don't have scripting skills to analyze it automagically.

  Reach:

   https://your_server/webacs/api/v1/data/InventoryDetails

  And who will list on all individual devices in your inventory of PI. In every detail of the device page will be a whole host of information, including the serial numbers of the devices (even including all members in the stacks of the switch).

  rest_api_inventory.PNG

  

  You can also run a report through "reports > report boat launch > device > detailed Hardware > new detailed material" and get a list of all of your devices, including serial numbers.

  Or we will say automatically that you status of the contract of service however.

• First Infrastructure 2.0

  Can someone tell me how many computers can I install the first Cisco infrastructure?

  I want to install in 4 computers... Can I install in 4 computers, or I have to buy 4 software?

  first Cisco is reserved for cisco not PC monitoring or 3rd party peripheral products

• Cisco first 2.1 / 2.2 support for Cisco ise 1.3?

  Hi, I just tried to connect cisco IP 2.1 to cisco ISE 1.3, but fails.
  I read the Release Notes, only 1.2 ISE ist supported.
  But I was wondering that the ssl negotiation fails (I made a packet capture).
  So PI 2.1 has not tried to connect to the ise 1.3 via api, because of the connection fails during the ssl handshake.

  Anyway, does anyone know if ISE 1.3 will be supported with a PI or PI 2.2 version 2.1.x?

  ICC 2.1.2 supports up to 1.2 ISE.  ICC 2.2 release date is scheduled for December 2014.  Read below.

  Table 4 The Infrastructure first, Cisco and Cisco wireless version compatibility matrix