Map of the C:/Users and undermaps is hidden in Vista and Windows 7 - How to display this map and find the main card for all the Point of junction of the operating system

Similar Questions

• tried to reinstall the operating system and it crashed

  Acer One Netbook D257.

  Installed to 2 g of RAM (you have to take all this goes to do!) and since then the wireless is uneven right next to the router unless.

  So, I thought it would be a pilot. Tried to install the driver from Intel. That didn't fix it.

  So I thought I would start fresh by reinstalling the operating system using the Acer tool that backs up the user's data.

  Wonder of wonders, it doesn't at all now! System 7 House is caput! He starts up a message saying that Acer could not install the OS!

  Suggestions? How can I get a copy of "acer" of win7 to replace on this netbook?

  TIA

  Ron

  Alrighty then, here is the resolution!

  Apparently, there is a removable rear on this computer! You must know the 'secret' to open the door!

  The 'trick' is to remove the keyboard, and then there are 5 magic screws that release the rear panel.

  There are two right under the disk hard corners L & R and then there are three online in the upper part of the hard drive. One of those is to the left of the upper-left corner (probably as he field key 'E'?) Once you do this, dislodging then the back is yet another task. Fortunately for me, I pushed inside to understand. There's "brand" in the plastic that indicate you the five. Just look at the two bottom and you'll see what I mean.

  The other thing to know is that the back side of the Panel has hooks that need to go first when back, which means that it is NOT the starting point of prying eyes. The other 3 sides are 'snap' as push so I think that starting with a front corner notches to stop might be the best solution, otherwise you will destroy the hooks.

  The problem with dropping the network was the antenna wires that connect to the transmitter. They were loose. They do not have much of a loop service for them so when I raised the mobo to install memory, the first time, they jumped off. The antenna is located around the monitor bezel.

  Now, it works fine.

  Why they have not make obvious to repair this unit is a mystery. I guess for $250, it's a deal, but then you get watered to have someone for you install memory.

  If all goes well, I saved someone some $ and headaches this announcement.

  Enjoy

  Ron

• If I use the SSD to initiate the operating system and a hard disk of data what exactly will be the benefit of this end?

  Hello

  I would like to know if I use the SSD drive for the operating system boot and a hard drive for data. What will be the benefit of this effect,

  I know that SSDS starts much more quickly and reads and writes data faster.

  When I use the SSD for OS then my only wil advantage so I have faster from the OS, not more than

  but the reading and writing data wil either by the hard drive so I wil not use all the benefits of the SSD, data wil be read and written by hard drive!

  Am I right or wrong?

  Johan

  SSD benefits for most of the time of loading, and it is for all software. If you install Windows on a SSD and return to a HARD drive after a few weeks you will certainly appreciate the value of an SSD, just for the

  only the loading.

  While startup in Windows is the most obvious, the Windows advantage is usually a bit snappier

  on an SSD.

  An SSD expected to also help in many programs such as Photoshop, video editing, the processing speeds

  or CAD, due to data being created during the writing of these programs.

  I think the reads and writes more visible with large files.

  All my programs are on the SSD, but my games are on the HARD disk.

  Games to load a large number of data and will load faster on an SSD, but it's still a few seconds.

  and as games use a lot of Go, it is not really profitable to keep (150 +) on an SSD.

  -J' I keep most of my data, except the music (to save space) in my user folder, but haven't really

  noticed a difference in speed when opening a data file, such as a Word, PDF, images, or similar

  'small' files from the HARD drive.
  -I wouldn't take an SSD less 120 GB. Try to run Windows on a 60GB translate too

  stuffing autour with management of data between the SSD and HDD. In particular, as it should be

  keep 20% an SSD free to allow the two "garbage collection" and deliver a load of

  cells of extra memory to extend the life of the DSS (data gets moved to empty cells when the cells die).

  There is also a noticeable difference between the speeds of SATA2 and SATA 3 controller, so if your motherboard uses the SATA2 more the advantage of an SSD is not as great as with SATA3.

  In addition, the new SATA3 SSD controllers are faster than those of two years ago.

  SSD is a big enough topic. There are many items in the wild that may be useful.

  .

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• VMware - script the creation of the vm and the operating system installation process

  Hello.

  Trying to determine the exact steps to automate the entire process of creating a virtual machine, and install a linux OS (Rhel/Centos) in the virtual machine. I need to understand the steps to do it entirely from the CLI using scripts. I have seen a few sites that describe the basic process of creation of the VM, which appears to generate the vmdk file.

  I've seen nothing that shows what needs to happen to install the operating system in the virtual machine, in the CLI. This process should be auto/programming, so I can't use the GUI.

  I imagine that the whole process will have to call the process/kickstart file and start from that somehow, but I don't see how the elements fit. The goal is to then have a VM with the required OS/Apps that are then run / deployed by external users on their machines.

  If this process can work, then we can talk to a Council-expert/vmware on the next phase of the project.

  Answer that be detailing how to proceed, or point of item/sites on that would be great!

  Thank you

  I just tested on a Linux system and had to perform the installation of VMware VIX - 1.10.1 - 266898 two times.  It is not the first time without any message in the log file.

  After a successful installation, I ran a .vmx without first modifying the /usr/lib/vmware-vix/vixwrapper-config.txt file and received the error message waited on the specified version was not found and then after editing it, I was able to run the .vmx using vmrun nogui.

• not able to connect database to another user of the operating system using the remote?

  Hello
  
  I want to connect database to another user of the operating system. I am able to connect Oracle database to the outside. but not able to connect different OS user.
  
  
  
  As an ORACLE user:
  
  [oracle@test1 admin] $ sqlplus /.
  
  SQL * more: Production of the 11.2.0.2.0 version on Mon Jan 16 19:41:57 2012
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL >
  
  
  
  User not ORACLE:
  
  [sample@test1 ~] $ export ORACLE_HOME=/u01/app/oracle/product/11.2.0.2/
  [sample@test1 ~] $ export ORACLE_SID = rman
  [sample@test1 ~] $ export PATH = $ORACLE_HOME/bin: $PATH
  [sample@test1 ~] $ sqlplus /.
  
  SQL * more: Production of the 11.2.0.2.0 version on Mon Jan 16 19:37:42 2012
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0
  
  
  Enter the user name:
  
  
  
  Thank you

  Make sure ORACLE_HOME is exactly the same between 2 environments: note that an end "/" is not necessary and that ending ' / ' could trigger ORA-01034.

• Impossible to download and reinstall the operating system after erasing HD

  Yesterday morning, my iMac won't start.  It was fine the night before.

  The progress bar reaches about two thirds to three quarters of the way to the end when the bar of progress disappears and I find myself with a gray screen. It does this by starting too.

  I followed the advice of Linc Davis at https://discussions.apple.com/message/21333265 (hash) 21333265 (Note - I can't find the symbol of hash on my keyboard key so if you if know where he is, please replace by in the link - oh (hash) and tell me where it's too please ;-)).

  I started the Revovery volume (now here actually).  Run Disk Utility/First aid finds no problem with MacIntosh HD (my boot drive). I can't find how to repair permissions.  The option no longer seems to be there. Reset NVRAM has nothing else that makes the iMac wonder my preferred language.

  I used download and reinstall OS option.  The first time I tried to re-download El Capitan, it took 15 minutes and 45 minutes to install.  Installation failed leaving me to the grey screen again.  I think that the Setup program itself was trying to restart the iMac when he got stuck in the same place I'm stuck.  I left it there for about six hours before I tried to restart manually.

  Tried to download the operating system again. This time, it was after using the recovery volume, select MacIntosh HD, by using erasing, then the option reinstall in THE.

  I did two times now.  The first time I tried 'Erase and re - install' the download bar has got to a point about a third of the way across, and then he stopped. Time of download bar gradually got more and more long, up to what I canceled it (when the display estimated download time is six and a half).  The internet connection was problematic, or the Mac had stopped download (similar to the earier progress bar).  The second attempt to delete and download, the download bar has not yet started to progress.

  My HARD drive has several volumes.

  1. The most important. My MacIntosh HD with OS 10.11.4 - El Capitan.
  2. The second, MacIntosh HD 2, is about 50 GB, a Mavericks installed on it.
  3. The third is 10.11.4 recovery volume.
  4. The fourth is another volume of recovery for the Mavericks.
  5. There is another called eDrive bulkhead.

  Apart from MacIntosh HD, with none of these volumes I problems in starting up (with the possible exception of the Mavericks resumed, that I have not tried to access all since the update to El Capitan).

  I used first aid utility disk several times, and no problems have been reported. I used the version of El Capitan permanently.

  I can't understand why, after erasing the MacIntosh HD to do it again, I can't get the iMac to download the MacOS and reinstall.

  A couple of clues-

  • After his clear utility drive always reports what is MacIntosh HD. (When I restart, the dialog "Select Start Drive" only shows the volume of the Mavericks and eDrive)
  • Disk utility also shows "Apple Disk Image/OS X Base System."  OF THE said that it is ejection. But this button does not work.  I suspect it's what might stop download me the installer and start again.

  I used e-drive to check the iMac and, in particular, the drive HARD; even performed a surface scan.  No problems have been reported.

  Your 2007 iMac is too old to download OS X, you need to install OS X since the recovery partition directly. If this does not work then Yes, something is wrong with your HD run Apple Hardware Test Mode Extended 2 - 3 times back to back, if errors appear which confirms what I said. You will need the original DVD that came with the computer in order to run it.

• Portege 3440CT reinstalling the operating system and error NTLDR

  Hi all

  I have a Portege 3400 I picked up a few years ago when starting a business. The machine was made by many, and it no longer starts. I want to reinstall the OS - the only problem is that I don't have the original CD Rom drive that came with the unit. I have a portable CD player that I can plug into the USB port of the adapter, but during the taking of a boot device, it is not yet trying to look for the CD player and immediately gives me an NTLDR error.

  The only option for the boot device which does not give me the same error is when I take the network (Lan), but I have no idea how to do to set up my local network so I can use it as a source for the reinstallation of the operating system.

  Can someone help me?

  Thank you

  Manish
  Matt (at) Gen - a (dot) com

  Hello

  The error NTLDR says that your device or disk is not bootable. What OS did you use? I know that Windows NT doesn't support USB.
  Please check out this article written by Microsoft:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;196661

  Also, I found a topic in the forum with a similar problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2182&MessageID=6043#6043

  Good bye

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  NTSC and PAL are analog standards and don't apply to the share or export settings in iMovie.

  It creates the same FPS and dimensions as your source file.

  What you trying to create?

• If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files?

  If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?

  Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.

  This has been answered before, if you do a search for "key recovery" it appears among the first results.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/will-i-lose-my-files-if-i-do-one-key-recove...

• Pavilion HPE H8 - 1360t: need to reinstall the operating system and software preinstalled on new hard drive on HP Pavilion HPE H8 - 1360 t

  My hard drive crashed while I have to reinstall my operating system and the software pre-installed on a new hard drive. I have no recovery disks. What should I do?

  Marcel, welcome to the forum.

  Here's a guide to help order you HP system recovery discs if they are still available.  If this isn't the case, you will need to purchase a full copy of the operating system.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Hard drive swapping and the operating system between two laptops of R61e

  I have a R61e who broke chassis. Not a left hinge broken, but broke up chassis where the left hinge connects.

  I have the opportunity to buy a used one with no operating system.

  Both are of type 7650 and all have two 80 GB hard drive.

  Will it work if I just reverse this HARD drive with the operating system for the new portable computer?

  Yes, it should work without major problems.

  In the worst cases, you need to update to a couple of pilots.

  Good luck.