Map the dynamic parameter.

Similar Questions

• How to pass the dynamic parameter to a function of database in OBIEE

  Hello
  
  I have a requirement like this. I need to create a report in OBIEE which stood in the discoverer. Now in the Scout report there is a calculated item in the worksheet based on the pkg.functions database. The user setting which gives the runtime parameters are then passed to the discoverer calculated elements dynamically. But I am not able to do this in OBIEE answers.
  
  Can someone tell me step by step how I can able to transmit the values of user setting selected in the level of response OBIEE.
  
  The example:
  
  GET_COMM_VALUE_PTD ('cost AFE & commitment'. ID of the AFE,: ' name at that time (AFE) ', 'cost of the AFE & commitment '. Salt of data, 'cost of the AFE & commitment '. The org ID)
  
  GET_COMM_VALUE_PTD - database function
  ('Cost AFE & commitment'. ID of the AFE,: ' name at that time (AFE) ', 'cost of the AFE & commitment '. Salt of data, 'cost of the AFE & commitment '. org Id - settings...: "period Name (AFE)" is the dynamic setting of the execution by the user.
  
  
  Help, please.
  
  Thank you
  
  Titas

  Hello

  Please see this link.

  http://satyaobieesolutions.blogspot.in/2012/08/database-evaluate-function-database.html

  This can be help you.

  Thank you
  Satya

• By the way the dynamic parameter with the URL while submitting the form

  Hello

  I the data in xml format in a servlet using the button send the form. I also need to pass a parameter with the URL. But the value of this parameter changes during execution based on the value of a particular field in the form. Please help me with it.

  Thank you.

  Here is an example that shows what I think you want. The code is on epreSubmit th of the button event. I put messages showing what the button submit it URL is... before and after we change. You can delete these messages when make you it work as you want.

  Hope that helps

  Paul

• Dynamic parameter as e-mail

  Some of my reports are sent by e-mail. Is this possible in BI Publisher to set up the dynamic parameter in the title of the e-mail, sysdate, for example.

  Hello

  Yes, it seems that it is possible.

  Please check out this old post: burst given the e-mail with the subject and the body set

  Bogdan

• Change the properties of the dynamic fields

  Hello

  I create dynamic buttons based on the configuration of the XML. I would like to dynamically change the properties of these buttons using some kind of LOOP. How can I have access to the properties of these fields created dynamically? May be using their name?

  Kind regards

  Daniel Cantin

  I map the dynamic field in an arraycollection object at creation time collection and browse the /object arraycollectoin and make the corresponding business logic.

• Use the dynamic filter Condition in the mapping

  Hello
  
  I tried to use a dynamic filter condition in my correspondence.
  
  I wrote this condition as:
  
  INOUTGRP1. Numer1 = ' | Number 1 | '
  and INOUTGRP1. Number2 = ' | Number2 '
  
  Number1 and number2 are setting for mapping entry, now I want to use the input parameter for the Filter Condition.
  
  Can someone tell me how I can handle this?
  
  Thanks in advance.
  
  Greetings

  You used wrong input parameters.
  Rather a link an input parameter to the operator to filter, then you can insert it from list of attributes as long as the same way as other attributes of filter operator group

  Kind regards
  Oleg

• Dynamically Open VI and him pass a parameter to the dynamically open VI

  I want to open a vi dynamically, at the same time I have to pass a parameter to the dynamically open VI. Is it possible to do?

  Thank you

  Chrystelle Roy

  Passionate about LabVIEW

  Check here https://zone.ni.com/reference/en-XX/help/371361M-01/lvconcepts/dynamic_loadcall_vis/

• How urlencode dynamic parameter in the HTTPService url

  I created a small dashboard that uses a dynamic url for the HTTPService getting tha data for the chart. The url gets its querystring (a username) to the flashvars parameter in the wrapper. SRV. URL works great and fills in my table when the user name does not need to be encoded URL, but how can I urlencode the username that I need to do?

  This is an excerpt from the packaging:
  < script type = "text/javascript" >
  var flashvars = {};
  flashvars. UserName = 'Heather % 20% c3% 98zer ";

  Comment: I intend to dynamically generate the user name Although the above example is static. The user name is encoded in the wrapper.

  This is an excerpt from the source MXML:

  < s:Application creationComplete = "initVars ()" > "

  [Bindable]
  public var urlXML1:String;
  private function initVars (): void {}
  urlXML1 = FlexGlobals.topLevelApplication.parameters.UserName;
  SRV. URL ="http://myserver.com/xml/YourSales.aspx?UserName=" + urlXML1.toString ();
  SRV. Send();
  }

  < mx:HTTPService id = "srv" url = "/ >

  < mx:ColumnChart id = dataProvider = "{srv.lastResult.Data.Result"myChart"}"... "

  Comment: urlXML1.toString () above should be encoded. This is my problem in my opinion. I can't wait to hear your advice.

  Best regards Bo

  
  

  var objParam:Object = {};

  objParam ["UserName"] = urlXML1.toString ();

  SRV. "URL ="http://myserver.com/xml/YourSales.aspx ";

  SRV. Method = "GET";

  SRV. Send (objParam);

• the output parameter mapping

  How can pass us values as output parameters that never I assign it says that it is limited and cannot be done.
  
  What values we can pass as output parameters. for a mapping of the output parameters.
  
  Thanks in advance.

  Hello

  You can use the function that you created in the process flow and set its result in a variable (or bind the output parameter of mapping a process flow variable), the variable can then be tested in conditions of transition, conditions, etc. in loop.

  See you soon
  David

• How to map a dynamic/computed column in the annotation of persistence?

  I try to use APP to map the results of a query to a class, but one of the columns returned by the query is the result of a subquery - it has no really a column associated with it.
  
  Example:
  
  Select a, b, c,.
  case when it exists (select 1 from some_other_table where...) then 'Y' end ' n else as test_flag
  of une_table
  where the...
  
  This case statement that performs a subquery to produce a result that is not actually mapped to a physical column so I
  
  How to mark such a situation, so that roll in hibernation, or anything that fills the a property named testFlag when it loads the results of this query?

  Trant says:
  I try to use APP to map the results of a query to a class, but one of the columns returned by the query is the result of a subquery - it has no really a column associated with it.

  Can you share the code? This seems to be the opposite of what JPA or any ORM package is intended; you would usually the ORM package produce SQL statements based on an object model and a query of high level object, but you try here to feed a sort of a pre-existing query object model. As I said - back. You may want to use executeNativeQuery?

  Whenever I am confronted with a situation where a request starts to do involving the unions, subqueries, etc.. I keep the side JPA as stupid as possible. I create a view on the side of the database and that you simply map my entity to this point of view. With appropriate indexing in place which usually performs very well.

• How to map a dynamic access to a group policy strategy?

  Experts,

  I'm doing an SSL implementation and a part of the requirement is to have the authentication of users in LDAP, are mapped to a particular group policy. They need this mapping for a particular bookmark assigned to them, because they are strictly using the WEBVPN portal. I have several DAP is configured and I want to map the user that is matched for each DAP, to a particular group policy. I read you can use the LDAP attributes on the user account in AD, but I want to map the DAP "mortgage" in Group Policy "mortgage", as opposed to reading additional AD attributes of the user. Is this possible?

  DAP and group policy are two ways to implement access control on the remote access vpn client.

  DAP must take precedence over group strategy.

  When the responses from the LDAP server for authentication request with the LDAP group member attribute, you can map this attribute of joining a DAP folder or a group policy.

  If you want to map the LDAP group member attribute to group policy, you must set the attribute LDAP map. Please see the example below

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  If you want to map the attribute for LDAP group membership in politics of the DAP, you will find the guide in ASDM

  Edit-> Advanced-> Guide dynamic access policy.

  The below is copied from the guide above.

  Example of composition of group

  You can create a basic logical expression for the special criteria of belonging to an AD Group. Because users can belong to several groups, DAP analyzes the response from the LDAP server in separate fields in a table. You need an advanced feature to accomplish the following:

  • Compare the memberOf a string field (in which case the user belongs to a group).

  • Iterate over each field returned memberOf if the data returned is of type "table".

  The function that we have written and tested for this purpose is shown below. In this example, if a user is a member of a group, ending by "-stu" they correspond to the DAP.

  assert(function()
  
         local pattern = "-stu$"
  
         local attribute = aaa.ldap.memberOf
  
         if ((type(attribute) == "string") and
  
             (string.find(attribute, pattern) ~= nil)) then
  
             return true
  
         elseif (type(attribute) == "table") then
  
             local k, v
  
             for k, v in pairs(attribute) do
  
                 if (string.find(v, pattern) ~= nil) then
  
                     return true
  
                 end
  
             end
  
         end
  
         return false
  
      end)()
  
      

• Entity Framework stored procedure Mapping - OUT unrecognized parameter

  I use the following software:

  • ODP.NET 12 c Release 3
  • Entity Framework 6
  • Visual Studio 2013, SP3
  • Oracle 11g Server

  I created a package containing a stored procedure to update a row in a table.  The procedure is an OUT parameter (named ROWS_AFFECTED) which returns the number of rows affected.

  CREATE OR REPLACE PACKAGE BODY TST. Customer_Procs
  AS
  PROCEDURE Update_Customer
  (
  CUST_ID IN NUMBER,
  WHAT IN VARCHAR2,
  L_NAME IN VARCHAR2,
  EMAIL IN VARCHAR2,
  LAST_UPDATE TIMESTAMP IN
  ROWS_AFFECTED NUMBER
  )
  AS
  BEGIN
  UPDATE
  TST. CUSTOMER
  SET
  NAME = WHAT,.
  LAST_NAME = L_NAME,
  EMAIL_ADDR = EMAIL,
  LAST_UPDT_TIME = CURRENT_TIMESTAMP
  WHERE
  CUSTOMER_ID = CUST_ID
  AND LAST_UPDT_TIME = LAST_UPDATE;

  ROWS_AFFECTED: = NUMBER OF ROWS SQL %;

  END Update_Customer;

  
  I executed successfully the stored procedure in SQL * more.  The ROWS_AFFECTED OUT parameter is filled with the good

  value.

  I imported the stored procedure in my Entity Framework model using the function successfully import.

  I then traced the parameters of the stored procedure to my entity properties. The ROWS_AFFECTED parameter is shown in the stored procedure mappings, but the "rows affected parameter" check box is cleared.

  Attempt to run my results in the following exception being throw:
  "CustomerModel.msl (22,12): error 2047: a mapping liaison function specifies a function.

  CustomerModel.Store.CUSTOMER_PROCS_UPDATE_CUSTOMER with a parameter not supported: ROWS_AFFECTED. Output parameters cannot

  be mapped through the RowsAffectedParameter property. Use the result links to return values from a function call.

  I am trying to determine what I need to do in order to have the Entity Framework to recognize the ROWS_AFFECTED OUT parameter in the

  stored procedure chart for concurrency control.

  I found a solution: try to declare ROWS_AFFECTED such as 'PLS_INTEGER' instead of 'NUMBER '.  This solved it for me.

• Unit test: is there a way to make the dynamic query of the value of running after the boot process?

  I wonder why the dynamic value query is executed before the boot process? Logically, it makes sense to run after them.

  For example, I test a stored procedure that is supposed to delete a record, and I'd like to create this test report should be deleted as part of the startup process before execution of the stored procedure call to delete this test record. Apparently the dynamic query of value not returns not the test report in as long as the query parameter to call the stored procedure under test, which makes me think that is executed before the startup process of design...

  Please advise...

  Thank you

  Val

  As this thread does no traction/attention of the team of SQL Developer for a while, I had to submit a request for formal improvement on metalink:

  RE: 19834977 - IN THE UNIT TEST REQUEST TO ALLOW TO CHANGE THE ORDER OF EXECUTION OF THE START OF THE PROCESS

  Thank you

  Val

• The dynamic user interface shell: opening of the dynamic tabs

  I'm trying to implement the dynamic tabs using the ADF dynamic user interface Shell. After clicking on a link, a dynamic tab opens that displays a table. One of the attributes of this table is again a link and when you click on this link it should open a new tab dynamically. But when I'm clicking on this link attribute in the first tab, it gives a NullPointerException, the getCurrentInstance() in the tab context returns a null value. How can I solve this problem?

  I had similar requirements. Add the input parameter according to the flow of tasks which you try to call the other task from the link stream.

  Name: tabContext

  class: oracle.ui.pattern.dynamicShell.TabContext

  scope: #{pageFlowScope.tabContext}

  required: true

  This solves the problem.

• TabContext get null inside the dynamic region of the ADF.

  Hello
  
  I have a dynamic region is placed inside a jsff and in this dynamic region, on click of a button, I try to access TabContext using the piece delimit code. But TabContext is always null.
  
  TabContext tabContext = TabContext.getCurrentInstance ();
  System.out.println (tabContext);
  
  In fact, by getting the TabContext, my intention is to open a TaskFlow in a new tab.
  I have a tabContext parameter defined in the workflow that fell like a dynamic region. The jsff that contains this dynamic region, which also has the tabContext parameter defined.
  
  Can someone help me please?
  
  Thank you
  Gaurav.

  Hello

  .. .and that you have set the region on bindings setting? something like ${pageFlowScope.tabContext}