MSN keeps disconnecting a few minutes after I connect.

Similar Questions

• My laptop keeps freezing a few minutes after opening.

  Data sheet:

  Acer Aspire EA40_HC model E1

  with Intel Core i3-2348 M @ 2.30 GHz CPU processor

  and Intel HD 3000 Graphics

  Windows 8 Pro

  RAM: 4.00 (2.58 GB usable)

  System type: 32-bit operating system, x 64 based processor

  ========================

  One day, I was playing CS, everything's fine, it works well, I know that my pc is not the best for playing games, I'm running with fps constant of 40-60 which is not obtained, but not bad either. I removed my battery of laptop, but kept plugged in because I know that if you kept it loads during use, it can decrease the life of the battery power. A few hours later in the game, my laptop just turned off. I don't know why, maybe the charger has been moved and unplugged then I checked. He was actually plugged in nice and safe, and I don't think it was the cause of the laptop to turn off or maybe it was. Then I turned on my laptop. Every thing seems fine but the 'Welcome' screen any longer that it was. A minutes and continues the 'welcome' to display. I know something was wrong because who usually took only a few seconds to load. I turned off my pc and opened it again. Nothing had changed, it is still stuck on the Welcome screen. So I waited a little longer, now 3 minutes, I saw the circle of loading thingy is frozen and non-mobile.

  I'm a little worried that I just broke my laptop, I tried a few corrections in the internet, but I can't find. I went advanced startup settings and did a system restore and choose the settings of only a few days.
  The system recovery succeeded. I restarted my PC, I was so happy that I fixed it, for so I thought it was. I open Google chrome, but as soon as I pressed the Enter key everything froze. Same office does not. I restarted my pc again. The start-up took a little longer. After going on the office a few minutes later the pc simply froze again. I can't do anything. I've been waiting so he could meet again for 10 minutes and still frozen. I restarted my pc and was able to put it in SafeMode before it froze again. And everything works fine in safe mode. I can still surf the internet but can't actually play cs: go in what is sad. I can still play undertale but which is nice. When I put back it in normal mode, it keeps freezing after a few minutes.

  If someone out there who can help me understand what causes this and how to solve my problem I would appreciate it a lot! :)

  Too long and did not read?: my PC turns off suddenly, when I boot it its stuck at welcome screen upward.

  Did a system restore and solved the problem but now it keeps freezing and not responding do not.

  Set it in safe mode and everything is fine but only limited.

  Read for more details.

  Hello

  Games can be hardware intensive (graphics, etc.) and your problem seems to come from a special combination of games and an accumulation of dust in your laptop causing it to cut.

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  _______________________________________________________

  Safe operating temperatures of criticism:

  "What should be the temperature of my processor in the computer?

  http://www.computerhope.com/issues/ch000687.htm

  @@@@@@@@@@@@@@@@@@@@@@@

  It is difficult to know what is the cause of the gel.

  It may be a number of things.

  But to rule out a software problem as follows.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• Why I automatically get disconnected a few minutes after loggin?

  After registration to my creative cloud account, I am automatically disconnected. After I got out of my typekit fonts will not longer work.

  Someone knows the solution?

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  - and the "loopback" https://forums.adobe.com/thread/1504792

• A few minutes after HDMI connection my Satellite breaks down and restart

  Dear people of good day,

  I hope you can help me.

  My new laptop perfectly transfers the signal HDMI audio/video. However, after 3-10 minutes the following occurs:
  The laptop screen is almost entirely black. It remains strange pixelated horizontal stripes on the screen of the laptop. The TV screen has in which a fixed image. In addition, a buzz is coming during this process.
  Then the computer restarts, so is completely black and the HDMI signals transmission is interrupted.

  There is no difference is I use laptop on the power cord or try it on battery power.

  The laptop from my friend (different model, but also Windows 8) works correctly with the same TV and the same new HDMI cable.

  I hope someone can help me with this problem. Thank you in advance.
  If it is a warranty case I return again.

  Message was edited: assignment has been translated

  It is not easy to explain what the problem is here.
  I recommend you reinstall your laptop with version and function test of original Windows with the "settings" again. Do not install anything either and do not change the standard configuration. Just test it.

  If the problem persists I would recommend you to contact your reseller or Toshiba service provider directly.

• Satellite Pro P300 restarts a few minutes after the stop

  Hello

  I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!

  The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).

  Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?

  Paul

  Where are you trying to download the BIOS?
  I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  To be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
  Check it!

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Windows Vista (64-bit) crashes a few minutes after startup is complete. Difficult to get out of the lock start.

  After a Windows updated 12/09/2009 from my computer stopped working.  It starts (without error) and then freeze a few minutes after loading Windows.

  I removed all the updates of Windows since mid-November, but this has not fixed the problem.  I also tried to boot to the last known successful configuration and has followed the procedures of "clean boot upward" found elsewhere on this forum.  None of these actions resulted in necessary corrections.

  Any other ideas?

  Hi lizseh,

  Welcome to Microsoft Answers Forums.

  I suggest you to restore the system to a previous state where it was working fine and check.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on start toreduce this includes this image, type System Restore in the Search box, and then click System Restore in the programs list. Collapse this includes this image

  2. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  3. in the System Restore dialog box, click choose a different restore point, and then click Next.

  4. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  5. click on Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  For more information, please visit the link below,

  http://support.Microsoft.com/kb/936212

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

• LaserJet Pro M201nw: M201nw LaserJet Pro no longer meets the ePrint requests, a few minutes after connecting to the network

  I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.

  I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.

  But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »

  When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.

  Local networking features of the printer such as network printing and web interface do not seem to have any problems.

  I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.

  Anyone else had problems with this printer model?

  Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.

• BSOD a few minutes after starting. And another after entering IE.

  Wake up BSOD a few minutes after starting.  Then I start and it's OK.  Then when I go into IE I get a new one.  Then, everything is OK for a long time (often for the rest of the day).  Trouble started when I downloaded Firefox, while IE was found to have a big security problem.  Download problems.  Tried to go back to the previous state good.  Still getting BSOD.  Then I backed up all personal files, reinstalled windows 3 times!  Still no luck.  Updates seem to work.  I have no material on it, more just printer, keyboard, mouse and speakers.  Something about a Bad pool caller and something on a manually initiated crash appear to be the most common BSOD.  Anyway, I don't understand all this.  I tried to talk with Microsoft technical support, but they could not help and indicate that it could be the hard drive itself.

  Someone at - it look at my https://onedrive.live.com/?cid=7C2BA0B8D210B559&id=7C2BA0B8D210B559%21105 minidump file

  And I would like to know if this is something that I can fix it or do I have to take the whole thing in a shop for repair.

  Thank you!!!

  Linda

  Hi Linda,.

  BAD_POOL_CALLER (c2)

  This indicates that the current thread is doing a bad pool request.

  4: kd > k
  Call child-SP RetAddr site
  fffff880 '03bf5928 fffff800' 031f2be9 nt! KeBugCheckEx
  fffff880'03bf5930 fffff880'01015431 nt! ExDeferredFreePool + 0 x 1201
  fffff880 '03bf59e0 00000000' 00028000 excsd + 0xa431
  fffff880 '03bf59e8 00000000' 642 d 0 x 28000 0000
  fffff880'03bf59f0 fffffa80 1006475 c 0x642d0000
  fffff880 '03bf59f8 00000000' 00000000 0xfffffa80 1006475 c

  excsd.sys (Diskeeper - ExpressCache) is tempted to rescue the pool which was previously already released.

  Uninstall ExpressCache as soon as possible.

  Kind regards

  Patrick

• USB disconnect its all a few minutes after installing a PCI USB/Firewire card

  I recently installed a USB (offering 2 additional USB ports and 2 firewire ports) PCI card. Since installing I get sounds disconnect USB every few minutes, even if no device is disconnected (or connected). There is a USB device that is connected to the new map (a map of Behringer guitar). The other 3 ports are not used.

  What is the origin of the sounds of disconnect USB and how can I make sure they? I am running Windows 7 64 - bit on a motherboard for Asus P8Z68-Vlx.

  Hello

  We would like to begin with an apology for not responding to your concerns on a timely manner.

  Thanks for the sharing of detailed information on the issue. Given that the problem occurs even after the withdrawal of the device to the computer USB. This problem may occur due to the failure of USB port, I suggest you contact the manufacturer of the computer for better assistance.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Tecra M9 PTM91E: WLan Intel 4965AGN disconnect every few minutes

  I have a laptop M9, model PTM91E. The wireless connection keeps disconnecting (then again in reconnecting) every few minutes. This happens on all the wireless networks in that I try to connect. Here what I have on my laptop: -.

  Intel Wireless WiFi Link 4965AGN
  11.5.0.32 driver version
  26/09/2007 driver date
  XP Pro

  Toshiba suggest to upgrade to Windows Vista, I nigtmares on something.

  Someone else has the same problem? All solutions?
  Thank you

  I read on the similar topic on a satellite A210 and with the Atheros WLan card.
  The solution was a update driver BIOS and WLan

  So check it out.

  Good luck

• Satellite C650 USB - Ports off a few minutes after the start of every day

  When I start my C650 Satellite for the first time every day the USB ports work perfectly, then after a few minutes, that you hear the-, they stop working and features of disappear of display devices & Printers.

  Reboot during the day makes no difference but the next day to the first commissioning of the USB ports working again. I think that every day they work a little longer, but I have not yet proved.

  Anyone got any ideas?

  You already posted in this thread.
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=73552

  Therefore, it would be interesting to know how USB ports work after that USB controllers was removed and installed again. The comments appreciated.

  In addition, you can disable the option that allows to disable USB ports in order to save power. This can be done in-USB Controllers-> properties > Device Manager - > last tab (power management)

• New computer falls a few minutes after connecting to the Internet.

  When I firstl newspaper in my internet computer will work fine, but after a few minutes, I get the dns server does not. How can I fix? My computer is new, I have troubleshooted my internet connection and all right?

  original title: WHY do I GET the SERVER DNS DOES NOT WHEN browsing WEB sites? HOW CAN I FIX?

  Hello Jackie,.

  ·         What is the operating system installed on the computer?

  Check to see if the following is useful.

  Method 1: Rinse and save DNS.

  a. Click Start. Click Run, type cmd. Press ENTER.

  b. at the command prompt, type the following command and press ENTER. It will display the message properly emptied the cache of DNS resolution.
  ipconfig/flushdns (there is a space between ipconfig and /)

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  Method 2: Release and renew the IP address by following these steps.

  a. Click Start. Click Run, type cmd. Press ENTER.

  b. at the command prompt, type the following command and press ENTER

  ipconfig/release

  ipconfig / renew

  Now check the issue.

• Computer hangs or freezes a few minutes after the beginning

  Hi all

  I hope someone has the knowledge to help me.

  I have a Dell Vostro 1500, Vista Business x 32 installed.

  In the last days:

  * On a normal startup, the computer hangs after a few minutes.
  I get either 'failure-security options' pop up or the computer crashes only the operation of the pointer.
  The blue off the Task Manager CPU usage hard drive light will goes from 0 to 1% and stays there.

  I was able to copy information from a pop up that says I was saved from a fall BSOD:
  Signature of the problem:
  Problem event name: bluescreen
  OS version: 6.06002.2.2.0.256.6
  Locale ID: 1033

  More information about the problem:
  BCCODE: f4
  BCP1: 00000003
  BCP2: 8F639608
  BCP3: 8F639754
  BCP4: 82A5FC30
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  * No problem starting and running programs and internet with ' SafeMode w / networking. "

  * The only thing I added was a Microsoft Update in the last days.
  I tried to do a system restore, but there is no system restore point.
  I used the restore of the system about 3 weeks there due to the other Microsoft Update was also causing startup problems.
  I didn't knowingly clear Points of system restore or turn off System Restore.

  * I ran Malwarebytes Anti-Malware and I got quarantined {PUP. Optional.Sanbreel.A, PUP. Optional.Sanbreel.A, PUP. Optional.Instacore.A, PUP. Optional.Hold.A}

  * I ran AVAST antivirus recently with no viruses listed, but not in the last days.

  * Chkdsk fixed drive C by removing some entries and fixed a couple of bad sectors.

  * sfc/scannow to block exactly 82% and I had to make a compromise difficult stop.

  If someone is knowledgeable on how to correct the situation described above, please answer!

  Perhaps it would be better for me to all my files on a memory stick or external hard drive simply copy and then reload Vista? Is there a disadvantage in doing this?

  This way you do not uncover what caused the problem and you might find that you still have a problem.

  so I can only perform simple tests troubleshooting with confidence.

  It's exactly what I mean do you. You follow the instructions, the information and I tell you what to do next. Ads simple as one of the meercats said in the TV. You get a bonus in this way you improve your knowledge of the works of your computer.

  We may be able to solve your problem yet more easily.

  Please download and run ADWCleaner and download a copy of the report produced for your OneDrive. Delete everything it finds. :
  http://www.bleepingcomputer.com/download/adwcleaner/

  I suggest you take the precaution to create a system restore point before running ADWCleaner, guard against unintended consequences. Select Start, Control Panel, system, System Protection, and then click the create button.